وصف الوظيفة
وصف الوظيفة
دور الوظيفة - مهندس كهربائي رئيسي – محطات مترو
يُعد التواصل شفهياً وكتابيًا باللغة الإنجليزية أمرًا إلزاميًا
المسؤوليات:
- قيادة تصميم كهربائي متعدد التخصصات للمحطات: توزيع المباني LV/MV، الحماية/التنسيق، التأريض والربط، الحماية من البرق، المولدات الاحتياطية والـ UPS، الإضاءة والتحكمات، عبر المحطات تحت الأرض والمصاحبة والمرتفعة.
- امتلاك دورة التصميم الكاملة: التقاط المتطلبات، أساسيات التصميم، دراسات الأحمال، المراجعات الخاصة بالتحديد/التفريغ القوسي، المخططات الأحادية، المخططات، جداول الكابلات، التخطيطات، المواصفات/BOQs، ومتطلبات صاحب العمل. توفير دعم البناء عند الحاجة.
- تطبيق معايير السلامة الحياتية الخاصة بالسكك الحديدية في المحطات: على سبيل المثال NFPA 130 للنقل العام بمسار ثابت (مخارج الطوارئ، الحماية من الحريق، التهوية والطوارئ والتحكم/الاتصالات)؛ التنسيق مع فرق السلامة من الحريق والسلامة الحياتية والتهوية والفرق المعمارية.
- تصميم إضاءة طوارئ مطابقة للـ EN 1838/BS 5266 (مسار الإخلاء، المناطق المفتوحة، المهمات عالية المخاطر) وإعداد حسابات فوتومترية وتخطيطات (Dialux/Relux).
- تصميم واجهات EMC والتأريض وفق EN 50121 (EMC للسكك الحديدية) و EN 50122-1 (التأريض/الربط للتركيبات الثابتة) وإدارة واجهات مع الإشارات والاتصالات وخدمات PSD.
- التنسيق رقميًا في BIM (Revit/Navisworks) مع الهندسة المعمارية والهيكلية ومشروعات MEP؛ إجراء مراجعات التصميم، منع التصادم ومصفوفات الواجهات.
- قيادة الموافقات الرسمية (السعودية والإمارات) من الدفاع المدني والمرافق، دعم ورش العمل مع العميل/أصحاب المصلحة، الهندسة القيمية وتسجيلات المخاطر.
- توجيه وإدارة فريق من المصممين؛ مراجعة التسليمات، الحفاظ على QA/QC؛ المساهمة في كتابة العروض وتقدير مستويات الجهد.
المؤهلات:- درجة البكالوريوس أو الماجستير في الهندسة الكهربائية.
- التسجيل المهني (مثلاً CEng/PE) مفضل بشدة.
- 12–18+ سنة في تصميم كهربائي للمباني/المحطات مع مشاريع رRail/مترو رئيسية؛ الخبرة في الخليج العربي مفضلة بشدة.
- فهم قوي لـ NFPA 130، EN 1838/BS 5266 (الإضاءة الطارئة)، EN 50121/EN 50122 (EMC/التأريض)، BS 7671/IET Wiring Regs أو NEC، ومتطلبات سلطات السكك الحديدية النموذجية.
- إتقان ETAP/Amtech، Dialux/Relux، AutoCAD/Revit، وتنسيق BIM؛ الإلمام بواجهات SCADA/BMS لأنظمة المحطة.
- إدارة واجهات ممتازة، تواصل مع أصحاب المصلحة، ومهارات قيادة الفريق.
ميّزات إضافية:- خبرة في دمج تصميم الكهرباء في المحطات مع PSD، تحكمات تهوية النفق، واجهات SCS/OCS، واستراتيجيات الإخلاء وفق NFPA 130.
- سابق تعامل مع السلطات في المملكة العربية السعودية (RCRC/SDAIA utilities/Civil Defense)
- خبرة RAMS (EN 50126/8/9) واعتبارات الأمن السيبراني/المادي للمحطات.
إذا وجدت أن هذا العمل يتوافق مع مهاراتك، يرجى التقديم أو مشاركة سيرتك الذاتية على
[اضغط هنا لمشاهدة البريد اﻹلكتروني]مع أكثر من 90 عامًا من الخبرة المجمعة، فخر NES Fircroft (NES) بأن تكون مزود التوظيف الهندسي الرائد عالميًا في قطاعات النفط والغاز، الطاقة والمتجدّدات، الكيماويات، الإنشاء والبنى التحتية، علوم الحياة، التعدين والتصنيع عالميًا. مع أكثر من 80 مكتباً في 45 دولة، يمكننا تزويد عملائنا بالخبرة الهندسية والفنية التي يحتاجونها، أينما ومتى دعت الحاجة. نحن نقدم للمقاولين أكثر من مجرد خدمة توظيف تقليدية، مع دعم في كل شيء من تأمين التأشيرات وتصاريح العمل إلى تقديم باقات مزايا رائدة في السوق وإقامة، لضمان أنهم قادرون بأمان وبالتوافق مع القوانين على دعم عملائنا.
Job description
Job description
Job Role -Principal Engineer – Electrical – Metro Stations
Verbal and written communication in English is mandatory
Responsibilities:
- Lead multi-disciplinary station electrical design: LV/MV building distribution, protection/coordination, earthing & bonding, lightning protection, standby generators & UPS, lighting & controls, across underground, at-grade, and elevated stations.
- Own the full design lifecycle: requirements capture, basis-of-design, load studies, selectivity/arc-flash reviews, single-lines, schematics, cable schedules, layouts, specs/BOQs, and employer’s requirements. Provide construction support as needed.
- Apply rail-specific life-safety standards in stations: e.g., NFPA 130 for fixed guideway transit (egress, fire protection, emergency ventilation & control/communications); coordinate with fire/life-safety, ventilation and architectural teams.
- Design compliant emergency lighting to EN 1838/BS 5266 (escape route, open-area, high-risk task) and produce photometric calculations & layouts (Dialux/Relux).
- Engineer EMC & earthing interfaces to EN 50121 (railway EMC) and EN 50122-1 (earthing/bonding for fixed installations) and manage interfaces with signaling/telecom/PSD.
- Coordinate digitally in BIM (Revit/ Navisworks) with architecture, structural and MEP; run design reviews, clash prevention and interface matrices.
- Lead authority approvals (Saudi & UAE Civil Defence and utilities), support client/stakeholder workshops, value engineering and risk registers.
- Mentor and manage a team of designers; review deliverables, uphold QA/QC; contribute to proposal writing and level-of-effort estimates.
Qualifications:- Bachelor’s or Master’s degree in Electrical Engineering.
- Professional registration (e.g., CEng/PE) strongly preferred.
- 12–18+ years in building/station electrical design with major rail/metro station projects; GCC experience strongly preferred.
- Strong grasp of NFPA 130, EN 1838/BS 5266 (emergency lighting), EN 50121/EN 50122 (EMC/earthing), BS 7671/IET Wiring Regs or NEC, and typical rail authority requirements.
- Fluency with ETAP/Amtech, Dialux/Relux, AutoCAD/Revit, and BIM coordination; familiarity with SCADA/BMS interfaces for station systems.
- Excellent interface management, stakeholder communication and team leadership skills.
Nice to Have:- Experience integrating station electrical design with PSD, tunnel ventilation controls, SCS/OCS interfaces, and evacuation strategies per NFPA 130.
- Past authority liaison in KSA (RCRC/SDAIA utilities/Civil Defense)
- RAMS exposure (EN 50126/8/9) and cyber/physical security considerations for stations.
If you find this job matching your skills, please apply or share your CV on
[اضغط هنا لمشاهدة البريد اﻹلكتروني]With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.