Equipment operator Jobs

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, A&P flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneuhydraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair / replacement experience.</li> </ul> <h4>Compensation details:</h4> <p>34.17</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Description<\/h4>\n<p>TheSoul Group is a global media company with over a decade of experience building and operating digital businesses at scale. With a presence across 60 platforms, content distributed in 21 languages, and more than 100 billion monthly views, we have established one of the largest and most operationally sophisticated media footprints in the world. Our remote-first team, spanning 85+ countries, has grown by solving \u2014 at real scale \u2014 the exact organisational and operational challenges most companies struggle with.<\/p>\n<p>That operational depth is the foundation of Valis \u2014 TheSoul Group's brand new business and AI platform for enterprise transformation. Valis is an institutional AI operating layer for mid-market organisations (roughly 200\u20132,000 employees). It sits across a company's systems, runs one shared, org-wide \"brain\" on everything the company knows, and applies encoded operator judgment on every answer \u2014 so the value of AI compounds for the company, not just for individuals using per-seat chatbots.<\/p>\n<p>Valis is already proven in production \u2014 built from real transformation work, encoding operational experience rather than theory \u2014 and we are now scaling its deployment to mid-market companies worldwide.<\/p>\n<p>We are seeking a Client Deployment Lead, AI to embed on-site alongside mid-market CEOs and make their AI-native transformation real on the ground. You work as a tight pod: you on-site owning the CEO relationship and the result and you drive the rollout to a finance-verified outcome, with elite remote engineers shipping the product configuration behind you. Every CEO who watches you land the transformation becomes the proof that wins the next one. This role is the engine of our go-to-market.<\/p>\n<h4>Responsibilities<\/h4>\n<ul>\n<li>Own the client-CEO relationship and the executive steering committee \u2014 as a peer, with real decision rights.<\/li>\n<li>Run the transformation cadence: weekly reviews, monthly finance-verified value reviews, and quarterly business reviews.<\/li>\n<li>Drive a fast, fixed-scope first win on the client's real data, then lead the full rollout (leadership first, then the wider team).<\/li>\n<li>Translate client problems into crisp, build-ready specs for remote engineers; own adoption and sign-off.<\/li>\n<li>Be personally accountable for a finance-verified outcome the client can see in their P&L.<\/li>\n<li>Build a portfolio of 2\u20133 marquee CEO accounts as each engagement matures.<\/li>\n<li>Own end-to-end rollout management \u2014 from kick-off through adoption, sign-off, and handover \u2014 ensuring every phase lands on time and to a measurable outcome.<\/li>\n<li>Codify the method after each deployment so the next one requires less ramp-up.<\/li>\n<\/ul>\n<h4>Requirements<\/h4>\n<ul>\n<li>A track record of owning real outcomes \u2014 you have moved a P&L or shipped a transformation, not just advised on one.<\/li>\n<li>CEO-room presence: ability to sit across from a mid-market CEO as a peer and earn organisational trust quickly.<\/li>\n<li>Technically literate enough to prototype, spec work, and direct engineers \u2014 you shape the solution, you don't wait for one.<\/li>\n<li>You thrive in ambiguity \u2014 operating effectively with incomplete information, shifting requirements, and no fixed playbook.<\/li>\n<li>Willing and energised to be on-site with clients (~30\u201360% travel).<\/li>\n<li>Likely background: top-tier strategy firm (Engagement Manager \u2013 Associate Partner) or a proven in-house transformation operator.<\/li>\n<li>Hands-on experience with AI \/ data tooling is a strong plus.<\/li>\n<\/ul>\n<h4>Benefits<\/h4>\n<ul>\n<li>Compensation: A competitive base calibrated to your market and seniority, plus a performance bonus tied to delivered outcomes.<\/li>\n<li>Equity: Meaningful, founder-tier ownership \u2014 this is the real upside, and it's sized to match.<\/li>\n<li>Authority: Real decision rights and an interim-executive mandate inside the client where granted. You own the result.<\/li>\n<li>Trajectory: A portfolio of marquee CEO relationships and a clear path to Regional GM for MENA.<\/li>\n<li>Location: On-site with the client during deployment (~30\u201360% travel across the MENA region); your home base is flexible.<\/li>\n<\/ul>\n<p><strong>Why AI makes this seat more valuable, not less:<\/strong> Valis automates the coordination, reporting and status layer of a company. This role sits on the other side of that line: CEO trust, judgment under ambiguity, and accountability for a real outcome are exactly what don't automate. As the platform gets stronger, the seat compounds in leverage \u2014 it doesn't erode.<\/p>\n<p>We appreciate your interest in our job opportunities and our company. Our team carefully evaluates each application to identify the most suitable candidates for the role. Due to the high volume of applications received, we may not be able to respond to every applicant. However, if your qualifications align with our requirements, we will contact you to discuss the next steps in the selection process.<\/p><\/p><p><\/p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Journeyman.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash /cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work without supervision.</li> <li>Provides technical and directional leadership guidance to lower-level Aircraft Mechanics.</li> <li>Provides training to lower-level Aircraft Mechanics.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of three years of actual aircraft mechanic maintenance experience required.</li> <li>Minimum of one year experience on MQ-9 aircraft, as an aircraft mechanic.</li> <li>Must have comprehensive knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess comprehensive knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a comprehensive understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 aircraft composite repair / replacement experience.</li> </ul> <h4>Compensation details:</h4> <p>36.26</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Job Role -Principal Engineer – Electrical (Aviation)&nbsp;<br>Verbal and written communication in English is mandatory<br>Responsibilities:</strong><ul><li>Lead electrical design from feasibility and Basis of Design (BoD) through detailed design, tender and construction support for aviation facilities.</li><li>Own the electrical power strategy for large-scale facilities (e.g., hangar bays): MV/LV distribution, redundancy, load management, earthing, and control philosophies—balancing reliability, safety, and energy performance (IEC/NFPA context).</li><li>Engineer electrical systems for hazardous operations: paint booths/rooms, fuel-cell maintenance areas, welding zones—ensuring compliance with ATEX/IECEx and coordination with mechanical ventilation and controls.</li><li>Design and specify power systems for aviation facilities: transformers, generators, UPS, distribution boards, and backup systems for mission-critical operations.</li><li>Integrate electrical utilities across MRO and workshop environments—ground power units (GPU), PCA interfaces, process equipment loads, and coordination with mechanical, fire/life safety, and control systems.</li><li>Shape electrical systems for catering facilities: resilient power distribution for kitchens, cold-chain systems, and hygienic areas aligned with HACCP/ISO 22000 requirements.</li><li>Deliver BIM-led coordination (Revit/Navisworks) across architecture, structures, MEP, and specialist systems; lead clash resolution and model QA.</li><li>Perform calculations and studies: load estimation, cable sizing, protection coordination, short-circuit analysis, and lighting design.</li><li>Author technical documents: BoD, load schedules, single-line diagrams (SLDs), specifications, and commissioning plans.</li><li>Mentor and review engineers/designers; lead design reviews, HAZOPs, and constructability/operability workshops.</li><li>Engage stakeholders—airlines, MROs, airport operators, and authorities—to secure approvals and ensure smooth delivery.</li><li>Lead retrofit, refurbishment, and brownfield upgrades in operational airport environments—assessing existing systems, planning phased upgrades, and integrating new systems with minimal disruption while improving capacity, compliance, and energy performance.</li></ul><strong>Key systems &amp; domains you’ll cover:</strong><ul><li>Hangars &amp; workshops: MV/LV distribution, ground power units (GPU), PCA electrical interfaces, high-bay lighting, emergency power, earthing and bonding for aircraft safety, and hangar door electrics.&nbsp;</li><li>Paint/corrosion control: hazardous-area electrical systems, explosion-proof equipment, interlocks, LEL monitoring interfaces, and ATEX/IECEx compliance coordinated with ventilation and controls.&nbsp;</li><li>Welding &amp; fabrication: power distribution for welding equipment, equipment earthing, task lighting, and integration with extraction/LEV systems aligned with OSHA/ACGIH guidance.&nbsp;</li><li>Power systems: transformers, generators, UPS, LV panels, and distribution networks designed for redundancy, resilience, and mission-critical operations.&nbsp;</li><li>Catering facilities: resilient power supply for kitchens, cold rooms/freezers, food processing areas, and hygienic zoning aligned with HACCP/ISO 22000 requirements.&nbsp;</li><li>ELV &amp; controls: fire alarm systems (NFPA 72), ICT, security (CCTV/access control), structured cabling, and BMS/SCADA integration for operational monitoring and control.</li></ul><br> <strong>Qualifications:</strong><ul><li>Bachelor’s degree in electrical engineering; Master's degree preferred.</li><li>Professionally registered (CEng, PE, or equivalent).</li><li>15+ years' experience in electrical building services design, including aviation and complex infrastructure projects.</li><li>Demonstrated experience leading multidisciplinary design teams and delivering major projects.</li></ul><strong>Technical Expertise:</strong><ul><li>Strong knowledge of international electrical design codes, standards, and aviation requirements.</li><li>Expertise in MV/LV power distribution, load assessments, protection systems, and earthing design.</li><li>Proficiency in BIM and industry-standard design software, including Revit, Navisworks, ETAP, and Dialux.</li><li>Experience in airport facilities, terminal buildings, and aviation-related infrastructure is highly desirable</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. USAF equivalent position is Aircraft Mechanic Apprentice. Essential Responsibilities: Performs all daily launch/recovery duties in support of operational requirements. Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems. Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion. Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools. Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs. Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft. Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks. May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Must be able to work with little-to-no supervision. Performs all other duties as assigned as requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>Minimum Requirements:</b></p><ul><li>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li><li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li><li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications:</p><ul><li>Associate degree in a relevant career field.</li><li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Aircraft Mechanic Experience within the last 10 years.</li><li>MQ-9 Experience as an Aircraft Mechanic.</li><li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li></ul><p></p></section>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.</p> <p>Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement, and the complete and thorough cleanup of the painting or repair area.</p> <p>Test, troubleshoot, and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.</p> <p>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist</p><p></p>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.</p> <p>Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement, and the complete and thorough cleanup of the painting or repair area.</p> <p>Test, troubleshoot, and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.</p> <p>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist</p><p></p>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.</p> <p>Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement, and the complete and thorough cleanup of the painting or repair area.</p> <p>Test, troubleshoot, and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers.</p> <p>Display basic computer skills including inputting air handler schedules and making temperature changes. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address</p><p></p>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.</p> <p>Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement, and the complete and thorough cleanup of the painting or repair area.</p> <p>Test, troubleshoot, and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers.</p> <p>Display basic computer skills including inputting air handler schedules and making temperature changes. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address</p><p></p>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.</p> <p>Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area.</p> <p>Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers.</p> <p>Display basic computer skills including inputting air handler schedules and making temperature changes. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs,</p><p></p>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.</p> <p>Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area.</p> <p>Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers.</p> <p>Display basic computer skills including inputting air handler schedules and making temperature changes. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs,</p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul> <h4>Compensation details:</h4> <p>$34.17 per hour</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting date: 05/06/2026 - Until filled</p> <p>The job requisition is expected to remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, A&P flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneuhydraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions, or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Journeyman.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work without supervision.</li> <li>Provides technical and directional leadership guidance to lower-level aircraft mechanics.</li> <li>Provides training to lower-level aircraft mechanics.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of three years of actual aircraft mechanic maintenance experience required.</li> <li>Minimum of one year experience on MQ-9 aircraft, as an aircraft mechanic.</li> <li>Must have comprehensive knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess comprehensive knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a comprehensive understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry, and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform routine maintenance and repairs on mechanical, electrical, and plumbing systems Diagnose and troubleshoot equipment malfunctions Conduct regular inspections of facility equipment and infrastructure Install and set up new equipment as needed Respond promptly to maintenance requests and emergency situations Maintain accurate records of maintenance activities and equipment status Collaborate with other departments to ensure smooth operations Adhere to all safety protocols and procedures Participate in ongoing training and skill development programs Assist in inventory management of tools, parts, and supplies Contribute to the development and implementation of preventive maintenance schedules Provide technical support and guidance to other team members as needed</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or vocational certificate in a relevant technical field</li><li>Minimum of 2 years of practical experience as a general technician or in a similar role</li><li>Proficiency in using basic tools and equipment related to facility maintenance</li><li>Strong problem-solving skills and ability to think critically</li><li>Excellent attention to detail and organizational skills</li><li>Ability to read and interpret technical manuals and schematics</li><li>Knowledge of safety procedures and regulations</li><li>Physical stamina and dexterity to perform various maintenance tasks</li><li>Excellent communication and interpersonal skills</li><li>Flexibility to work in a dynamic environment and handle multiple priorities</li><li>Goal-oriented mindset with a focus on efficiency and customer satisfaction</li><li>Relevant certifications in specific technical areas (e.g., HVAC, electrical) are a plus</li><li>Basic computer skills for record-keeping and communication purposes</li><li>Ability to work independently and as part of a team</li><li>Willingness to learn and adapt to new technologies and procedures</li></ul><p></p></section>