Fire Fighting EngineerJobs

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Job description<br>Job Role -Principal Engineer – Mechanical – Aviation Buildings<br>Verbal and written communication in English is mandatory<br>Responsibilities:</strong><ul><li>Lead mechanical/HVAC design from feasibility and basis-of-design (BoD) through detailed design, tender and construction support for aviation facilities.</li><li>Own the environmental strategy for very large volumes (e.g., hangar bays): heating/cooling concepts, destratification, purge/exhaust modes, make-up air, and controls sequences—balancing energy, IAQ and safety. (UFC/ASHRAE/NFPA context).</li><li>Engineer specialist ventilation for hazardous operations: paint spray booths/rooms, fuel-cell maintenance/purge ventilation, welding/fume extraction, VOC control, and hazardous-area interfaces with electrical/controls.</li><li>Integrate process utilities common to MRO and workshops.</li><li>Shape catering facility HVAC and hygienic air zones: kitchen exhaust &amp; makeup air (NFPA 96), pressure cascades, temperature/humidity control for clean prep/packing.</li><li>Deliver BIM-led coordination (Revit/Navisworks) across architecture, structures, process, fire protection, and controls; lead clash resolution and model QA.</li><li>Run calculations &amp; simulations: loads, duct/pipe sizing, ventilation rates, smoke/fume capture, and (where needed) CFD to support the thermal comfort studies.</li><li>Author technical documents: BoD, design reports, specifications, sequences of operation, control narratives, FAT/SAT/commissioning plans.</li><li>Engage stakeholders—airlines/MROs, airport operators, food safety teams, and authorities—to secure approvals and smooth delivery.</li><li>Lead retrofit, refurbishment, and brownfield upgrade projects within operational airport environments—assessing existing systems, developing phased upgrade strategies, ensuring minimal disruption to ongoing operations, and integrating new systems with legacy infrastructure while addressing capacity, compliance, and energy performance improvements.<br> <br> &nbsp;</li></ul><strong>Key systems &amp; domains you’ll cover:</strong><ul><li>Hangars &amp; workshops: general and emergency exhaust, purge ventilation for fuel system work, floor-level capture where required, destratification/HVLS fans, door air management, radiant/air systems, PCA (pre-conditioned air) and GSE interfaces.</li><li>Catering facilities: high-duty kitchen exhaust &amp; makeup air (hoods, MAUs, heat recovery), grease ducting, rooftop terminations, pressure zoning for hygiene, and interfaces to cold rooms/freezers and clean areas.</li><li>Experience in refurbishment projects, passenger terminal building Mechanical design (HVAC, Drainage systems) is preferred.<br> <br> &nbsp;</li></ul><strong>Qualifications:</strong><ul><li>Bachelor’s or Master’s degree in Mechanical Engineering.</li><li>Professional registration (e.g., CEng/PE) strongly preferred.</li><li>15+ years’ experience in building services (mechanical/HVAC), with significant aviation project delivery (Passenger terminal building, hangars, MRO shops, flight catering, or similar).</li><li>Proven leadership as Lead/Principal Engineer on multi-disciplinary design projects and Prior delivery in live airport environments (airside/landside interfaces, works phasing) is preferred.</li><li>Expertise writing BoDs, specifications, P&amp;IDs, control sequences, etc.</li><li>BIM fluency: Revit, Navisworks; competence with calculations (e.g., IES-VE/HAP/eQuest),CFD exposure preferred.</li><li>Client-facing communication and team leadership; mentoring and QA/QC across multiple concurrent packages.</li><li>Strong communication skills for effective client presentations, stakeholder workshops, and cross-functional coordination.</li><li>Willingness to be based at Dammam Airport for the initial phase of the project (short-term assignment) and relocate to the main office upon project completion</li></ul><br>If you find this job matching your skills, please apply or share your CV on sayali.kothmire@nesfircroft.com<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p><h4>Job description</h4> <p><strong>Job role - Senior/Principal MEP Engineer (Building Services)</strong><br> Verbal and written communication in English is mandatory.</p> <p><strong>Strong experience:</strong></p> <ul> <li>8–15 years of mechanical building services design experience</li> <li>Strong HVAC design background</li> <li>Commercial, residential, mixed-use project experience</li> <li>ASHRAE and NFPA knowledge</li> <li>GCC/Middle East project experience</li> </ul> <p><strong>Responsibilities:</strong></p> <ul> <li>Support and deliver mechanical design packages for building services projects</li> <li>Work on HVAC, plumbing, drainage, and fire protection systems</li> <li>Ensure designs comply with international codes (ASHRAE, NFPA, BS) and local authority requirements</li> <li>Contribute to sustainable design solutions, including energy-efficient systems</li> <li>Coordinate with multidisciplinary teams, clients, and contractors</li> <li>Prepare and review technical deliverables</li> <li>Support project delivery from concept through to commissioning</li> </ul> <p><strong>Requirements:</strong></p> <ul> <li>Bachelor’s degree in Mechanical Engineering</li> <li>8–15 years of experience in mechanical building services design</li> <li>Good knowledge of international standards and local authority requirements</li> <li>Experience working on building projects (commercial, residential, mixed-use)</li> <li>Strong coordination and communication skills</li> <li>Middle East experience preferred</li> </ul> <p>With over 90 years' combined experience, NES Fircroft is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining, and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<p><h4>Responsibilities:</h4> <p><strong>Lead electrical design</strong> from feasibility and basis of design (BoD) through detailed design, tender, and construction support for aviation facilities.</p> <p><strong>Own the electrical power strategy</strong> for large-scale facilities (e.g., hangar bays): MV/LV distribution, redundancy, load management, earthing, and control philosophies—balancing reliability, safety, and energy performance (IEC/NFPA context).</p> <p><strong>Engineer electrical systems</strong> for hazardous operations: paint booths/rooms, fuel-cell maintenance areas, welding zones—ensuring compliance with ATEX/IECEx and coordination with mechanical ventilation and controls.</p> <p><strong>Design and specify power systems</strong> for aviation facilities: transformers, generators, UPS, distribution boards, and backup systems for mission-critical operations.</p> <p><strong>Integrate electrical utilities</strong> across MRO and workshop environments—ground power units (GPU), PCA interfaces, process equipment loads, and coordination with mechanical, fire/life safety, and control systems.</p> <p><strong>Shape electrical systems</strong> for catering facilities: resilient power distribution for kitchens, cold-chain systems, and hygienic areas aligned with HACCP/ISO 22000 requirements.</p> <p><strong>Deliver BIM-led coordination</strong> (Revit/Navisworks) across architecture, structures, MEP, and specialist systems; lead clash resolution and model QA.</p> <p><strong>Perform calculations and studies:</strong> load estimation, cable sizing, protection coordination, short-circuit analysis, and lighting design.</p> <p><strong>Author technical documents:</strong> BoD, load schedules, single-line diagrams (SLDs), specifications, and commissioning plans.</p> <p><strong>Mentor and review engineers/designers;</strong> lead design reviews, HAZOPs, and constructability/operability workshops.</p> <p><strong>Engage stakeholders</strong>—airlines, MROs, airport operators, and authorities—to secure approvals and ensure smooth delivery.</p> <p><strong>Lead retrofit, refurbishment, and brownfield upgrades</strong> in operational airport environments—assessing existing systems, planning phased upgrades, and integrating new systems with minimal disruption while improving capacity, compliance, and energy performance.</p> <h4>Key systems & domains you’ll cover:</h4> <ul> <li>Hangars & workshops: MV/LV distribution, ground power units (GPU), PCA electrical interfaces, high-bay lighting, emergency power, earthing and bonding for aircraft safety, and hangar door electrics.</li> <li>Paint/corrosion control: hazardous-area electrical systems, explosion-proof equipment, interlocks, LEL monitoring interfaces, and ATEX/IECEx compliance coordinated with ventilation and controls.</li> <li>Welding & fabrication: power distribution for welding equipment, equipment earthing, task lighting, and integration with extraction/LEV systems aligned with OSHA/ACGIH guidance.</li> <li>Power systems: transformers, generators, UPS, LV panels, and distribution networks designed for redundancy, resilience, and mission-critical operations.</li> <li>Catering facilities: resilient power supply for kitchens, cold rooms/freezers, food processing areas, and hygienic zoning aligned with HACCP/ISO 22000 requirements.</li> <li>ELV & controls: fire alarm systems (NFPA 72), ICT, security (CCTV/access control), structured cabling, and BMS/SCADA integration for operational monitoring and control.</li> </ul> <h4>Qualifications:</h4> <ul> <li>Bachelor’s degree in electrical engineering; master’s degree preferred.</li> <li>Professionally registered (CEng, PE, or equivalent).</li> <li>15+ years' experience in electrical building services design, including aviation and complex infrastructure projects.</li> <li>Demonstrated experience leading multidisciplinary design teams and delivering major projects.</li> </ul> <h4>Technical expertise:</h4> <ul> <li>Strong knowledge of international electrical design codes, standards, and aviation requirements.</li> <li>Expertise in MV/LV power distribution, load assessments, protection systems, and earthing design.</li> <li>Proficiency in BIM and industry-standard design software, including Revit, Navisworks, ETAP, and Dialux.</li> <li>Experience in airport facilities, terminal buildings, and aviation-related infrastructure is highly desirable.</li> </ul></p><p></p>

<p><h4>Job role - principal electrical design engineer – mission critical (data centres)</h4> <p>Verbal and written communication in English is mandatory.</p> <p><strong>Strong experience</strong></p> <ul> <li>Uptime Tier III/IV data center design experience</li> <li>MV/LV, UPS & generator design expertise</li> <li>Data center standards knowledge (Uptime/TIA-942/NFPA)</li> <li>Client-facing leadership and stakeholder management experience</li> </ul> <p><strong>Responsibilities</strong></p> <ul> <li>Translate client requirements into robust electrical designs, including electrical distribution (medium and low voltage), generator, UPS systems, switchgear, busducts, grounding schemes, power monitoring systems, fire detection and alarm system etc.</li> <li>Produce all technical documentation: calculations, system studies, single-line diagrams, layout drawings, specifications, block schematics, and compliance tables.</li> <li>Lead conceptual and detailed design reviews, leveraging advanced analytical tools, BIM/Revit models, and coordination with architectural, mechanical, and building technology disciplines.</li> <li>Mentor and develop junior engineers, share best practices in mission-critical electrical systems, and drive continuous improvement across the design team.</li> <li>Collaborate closely with regional and global teams to grow consulting capabilities and ensure alignment with global design standards.</li> <li>Develop and standardize scalable, repeatable data center solutions to drive consistency and efficiencies across UAE and KSA.</li> <li>Conduct site assessments, capacity planning, and feasibility studies aligned with Uptime Institute Tier requirements.</li> <li>Ensure compliance with international standards (Uptime Institute, TIA-942, NFPA, ASHRAE) and local regulations.</li> <li>Drive business growth by contributing to technical proposals, client presentations, and by identifying opportunities for service enhancements.</li> </ul> <p><strong>Qualifications</strong></p> <ul> <li>Bachelor’s or master’s degree in electrical engineering.</li> <li>10+ years of progressive electrical experience in planning, designing, and delivering large-scale data centers, including multiple Uptime Tier III/IV projects.</li> <li>Demonstrated ability to coordinate with stakeholders in complex, matrixed environments.</li> <li>Professional certifications such as Uptime Tier Certified Professional, PMP, LEED AP, or BICSI RCDD are highly desirable.</li> <li>In-depth knowledge of data centres electrical infrastructure, power distribution topologies, servers, storage, network systems, SCADA systems, power management, ELV, and security.</li> <li>Experienced in data center construction phasing and associated design planning.</li> <li>Strong communication skills for effective client presentations, stakeholder workshops, and cross-functional coordination.</li> <li>Familiarity with local and international codes and standards, including NEC, IEC, ISO 50001, ISO 27001, PDPL, and ESMA.</li> </ul> <p>With over 90 years' combined experience, NES Fircroft is proud to be the world's leading engineering staffing provider spanning the oil & gas, power & renewables, chemicals, construction & infrastructure, life sciences, mining and manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<p>Job Description: Plant Engineer Company:** CROWN Middle East Can Manufacturing Ltd Job Summary The Plant Engineer at CROWN Middle East Can Manufacturing Ltd is responsible for optimizing the operational efficiency and reliability of our manufacturing plant's equipment and facilities. This role involves planning, organizing, and directing the maintenance and engineering activities to ensure safe, cost-effective, and high-quality production of beverage cans.</p><p>Job Responsibilities</p><ul><li>Develop, implement, and manage preventative maintenance programs for all plant machinery, equipment, and facilities to minimize downtime and maximize operational uptime.</li><li>Lead and supervise a team of maintenance technicians, providing guidance, training, and performance evaluations.</li><li>Diagnose and troubleshoot complex mechanical, electrical, and pneumatic issues on production lines and ancillary equipment.</li><li>Manage capital projects from conception to completion, including scope definition, budget adherence, vendor selection, and project execution, ensuring timely and within-budget delivery.</li><li>Identify and implement continuous improvement initiatives to enhance equipment performance, reduce waste, and improve overall plant efficiency and safety.</li><li>Ensure compliance with all relevant health, safety, environmental, and quality regulations and company standards.</li><li>Collaborate with production, quality, and supply chain departments to optimize manufacturing processes and resolve operational challenges.</li><li>Maintain accurate records of maintenance activities, equipment history, and spare parts inventory.</li><li>Source and manage relationships with external contractors and suppliers for specialized services and parts.</li><li>Prepare and manage the annual maintenance budget, controlling expenditures and identifying cost-saving opportunities.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Job Qualifications</p><ul><li>Bachelor's degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering, or a related field.</li><li>Minimum of 2 years of experience in a plant engineering or maintenance management role within a manufacturing environment, preferably in the can manufacturing, packaging, or similar high-volume production industry.</li><li>Strong knowledge of industrial machinery, automation, hydraulics, pneumatics, and electrical systems.</li><li>Proven experience with Computerized Maintenance Management Systems (CMMS).</li><li>Demonstrated ability to lead and motivate a technical team.</li><li>Excellent problem-solving, analytical, and decision-making skills.</li><li>Strong project management skills, with experience managing capital projects.</li><li>Solid understanding of health, safety, and environmental regulations.</li><li>Proficiency in English; Arabic language skills are a plus.</li><li>Ability to work effectively in a fast-paced, demanding manufacturing environment.</li><li>Strong communication and interpersonal skills, capable of interacting effectively at all levels of the organization.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Install, maintain, perform preventative maintenance on, and recommend replacement of tools, appliances, and equipment. Calibrate all controls, gauges, meters, etc. Identify, locate, and operate all shut-off valves. Order, mark, and stock parts and supplies as needed. Maintain inventory and purchase orders log. Inspect tools, equipment, or machines. Enter and locate work-related information using computers. Operate power lift. Complete the life safety checklist, including the fire-pump run test and generator run test. Inspect fire sprinkler valves and alarm systems. Assist in development of disaster response protocols. Respond and attend to guest repair requests.<br>Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees. Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional and maintain confidentiality of proprietary information. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, and assist individuals with disabilities. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Speak with others using clear and professional language. Visually inspect tools, equipment, or machines. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Grasp, turn, and manipulate objects of varying size and weight. Stand, sit, or walk for an extended period of time. Move up and down stairs and/or service ramps. Perform other reasonable job duties as requested by Supervisors.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: Technical, Trade, or Vocational School Degree.<br>Related Work Experience: At least 2 years of related work experience.<br>Supervisory Experience: At least 2 years of supervisory experience.<br>License or Certification: None&nbsp;<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>When you join the Sheraton family, you become a member of its global community. We’ve been a place to gather&nbsp;and connect since 1937. At Sheraton, associates create a sense of belonging in more than 400 communities around the world. We invite, we welcome, and we connect guests through engaging experiences and thoughtful service. If you’re a team player who is excited to deliver&nbsp;a&nbsp;meaningful guest experience, we encourage you to explore&nbsp;your next career opportunity&nbsp;with Sheraton. Join us on our mission to be ‘The World’s Gathering Place’. In joining Sheraton Hotels &amp; Resorts, you join a portfolio of brands with Marriott International. Be where you can do your best work,​&nbsp;begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<p><h4>Job description</h4> <p><strong>Job role - Principal engineer – mechanical – aviation buildings</strong><br> Verbal and written communication in English is mandatory.</p> <h4>Responsibilities:</h4> <ul> <li>Lead mechanical/HVAC design from feasibility and basis-of-design (BoD) through detailed design, tender and construction support for aviation facilities.</li> <li>Own the environmental strategy for very large volumes (e.g., hangar bays): heating/cooling concepts, destratification, purge/exhaust modes, make-up air, and controls sequences—balancing energy, IAQ and safety (UFC/ASHRAE/NFPA context).</li> <li>Engineer specialist ventilation for hazardous operations: paint spray booths/rooms, fuel-cell maintenance/purge ventilation, welding/fume extraction, VOC control, and hazardous-area interfaces with electrical/controls.</li> <li>Integrate process utilities common to MRO and workshops.</li> <li>Shape catering facility HVAC and hygienic air zones: kitchen exhaust and makeup air (NFPA 96), pressure cascades, temperature/humidity control for clean prep/packing.</li> <li>Deliver BIM-led coordination (Revit/Navisworks) across architecture, structures, process, fire protection, and controls; lead clash resolution and model QA.</li> <li>Run calculations and simulations: loads, duct/pipe sizing, ventilation rates, smoke/fume capture, and (where needed) CFD to support the thermal comfort studies.</li> <li>Author technical documents: BoD, design reports, specifications, sequences of operation, control narratives, FAT/SAT/commissioning plans.</li> <li>Engage stakeholders—airlines/MROs, airport operators, food safety teams, and authorities—to secure approvals and smooth delivery.</li> <li>Lead retrofit, refurbishment, and brownfield upgrade projects within operational airport environments—assessing existing systems, developing phased upgrade strategies, ensuring minimal disruption to ongoing operations, and integrating new systems with legacy infrastructure while addressing capacity, compliance, and energy performance improvements.</li> </ul> <h4>Key systems and domains you’ll cover:</h4> <ul> <li>Hangars and workshops: general and emergency exhaust, purge ventilation for fuel system work, floor-level capture where required, destratification/ HVLS fans, door air management, radiant/air systems, PCA (pre-conditioned air) and GSE interfaces.</li> <li>Catering facilities: high-duty kitchen exhaust and makeup air (hoods, MAUs, heat recovery), grease ducting, rooftop terminations, pressure zoning for hygiene, and interfaces to cold rooms/freezers and clean areas.</li> <li>Experience in refurbishment projects, passenger terminal building mechanical design (HVAC, drainage systems) is preferred.</li> </ul> <h4>Qualifications:</h4> <ul> <li>Bachelor’s or master’s degree in mechanical engineering.</li> <li>Professional registration (e.g., CEng/PE) strongly preferred.</li> <li>15+ years’ experience in building services (mechanical/HVAC), with significant aviation project delivery (passenger terminal building, hangars, MRO shops, flight catering, or similar).</li> <li>Proven leadership as lead/principal engineer on multi-disciplinary design projects and prior delivery in live airport environments (airside/landside interfaces, works phasing) is preferred.</li> <li>Expertise writing BoDs, specifications, P&IDs, control sequences, etc.</li> <li>BIM fluency: Revit, Navisworks; competence with calculations (e.g., IES-VE/HAP/eQuest), CFD exposure preferred.</li> <li>Client-facing communication and team leadership; mentoring and QA/QC across multiple concurrent packages.</li> <li>Strong communication skills for effective client presentations, stakeholder workshops, and cross-functional coordination.</li> <li>Willingness to be based at Dammam Airport for the initial phase of the project (short-term assignment) and relocate to the main office upon project completion.</li> </ul> <p>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the oil & gas, power & renewables, chemicals, construction & infrastructure, life sciences, mining and manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<p><h4>Description</h4> <p>The Specialist Security Engineer – Fortinet Solutions is responsible for designing, implementing, optimizing, and supporting advanced Fortinet-based cybersecurity solutions across enterprise, service provider, and data center environments. The role serves as a technical subject matter expert for Fortinet technologies, providing architecture design, deployment leadership, troubleshooting, migration support, and operational excellence across customer environments.</p> <p>Working within ZainTECH’s Cybersecurity Practice, the Specialist Security Engineer will lead the delivery of secure, scalable, and resilient security solutions covering network security, SD-WAN, SASE, Zero Trust architectures, privileged access management, web application security, and security monitoring platforms. The role collaborates closely with customers, presales teams, project delivery teams, and technology partners to ensure successful implementation and ongoing optimization of Fortinet security solutions.</p> <h4>Responsibilities</h4> <p><strong>Security architecture & solution design</strong></p> <ul> <li>Design and implement enterprise and data center security architectures utilizing Fortinet technologies.</li> <li>Develop secure, scalable, and highly available security solutions aligned with customer business and security requirements.</li> <li>Design and architect High Availability (HA) deployments, advanced SD-WAN solutions, Secure Access Service Edge (SASE) architectures, Zero Trust Network Access (ZTNA) environments, network segmentation and micro-segmentation strategies.</li> <li>Conduct security assessments and provide recommendations aligned with cybersecurity best practices and industry standards.</li> <li>Develop High-Level Designs (HLDs), Low-Level Designs (LLDs), migration and implementation plans, technical architecture documentation.</li> </ul> <p><strong>Fortinet solution deployment & integration</strong></p> <ul> <li>Lead the installation, configuration, migration, and optimization of Fortinet solutions including: <ul> <li>FortiGate</li> <li>FortiManager</li> <li>FortiAnalyzer</li> <li>FortiSwitch</li> <li>FortiAP</li> <li>FortiWeb</li> <li>FortiADC</li> <li>FortiPAM</li> <li>FortiProxy</li> <li>FortiDLP</li> <li>FortiSIEM</li> <li>FortiSASE</li> <li>FortiAppSec</li> </ul> </li> <li>Integrate Fortinet platforms with: <ul> <li>Active Directory</li> <li>LDAP</li> <li>RADIUS</li> <li>TACACS+</li> <li>Identity Providers (IdPs)</li> <li>Multi-Factor Authentication (MFA) platforms</li> <li>SIEM and Syslog solutions</li> <li>AWS and Microsoft Azure environments</li> <li>Third-party security solutions</li> </ul> </li> <li>Ensure successful migration and interoperability between legacy and modern security infrastructures.</li> </ul> <p><strong>Security operations & technical support</strong></p> <ul> <li>Provide advanced L2, L3, and escalation support for enterprise customers.</li> <li>Troubleshoot complex: <ul> <li>Security incidents</li> <li>Firewall issues</li> <li>Routing and connectivity problems</li> <li>VPN-related issues</li> <li>Authentication and access control challenges</li> </ul> </li> <li>Conduct root cause analysis and provide recommendations to prevent recurrence.</li> <li>Monitor solution performance and ensure high service availability.</li> <li>Maintain configuration backups, disaster recovery plans, and operational documentation.</li> <li>Support customers during critical incidents and major service disruptions.</li> </ul> <p><strong>Network security & advanced security technologies</strong></p> <ul> <li>Configure, manage, and optimize: <ul> <li>Security policies</li> <li>Application control</li> <li>Intrusion Prevention Systems (IPS)</li> <li>Web filtering</li> <li>Anti-malware services</li> <li>Data Loss Prevention (DLP)</li> <li>Proxy services</li> <li>Privileged Access Management (PAM)</li> <li>Security event monitoring and correlation</li> </ul> </li> <li>Deploy and support: <ul> <li>Psec VPN</li> <li>SSL VPN</li> <li>Remote Internet Access (RIA)</li> <li>Direct Internet Access (DIA)</li> <li>Site-to-Site VPNs</li> <li>Hub-and-Spoke VPN architectures</li> </ul> </li> <li>Implement Zero Trust and SASE security models to enhance customer security posture.</li> </ul> <p><strong>Project delivery & customer engagement</strong></p> <ul> <li>Lead implementation, migration, upgrade, and optimization projects.</li> <li>Coordinate activities with customers, vendors, project managers, internal delivery teams.</li> <li>Produce technical implementation documentation, acceptance reports, as-built documentation, operational handover documentation.</li> <li>Conduct customer knowledge transfer sessions and technical workshops.</li> <li>Support presales teams during solution presentations, technical discussions, and proof-of-concept activities.</li> </ul> <p><strong>Continuous improvement & technical leadership</strong></p> <ul> <li>Stay current with emerging cybersecurity threats, Fortinet product developments, and industry best practices.</li> <li>Participate in technical enablement and knowledge-sharing initiatives.</li> <li>Support the development of technical standards, implementation methodologies, and operational procedures.</li> <li>Contribute to service improvement initiatives across the Cybersecurity Practice.</li> </ul> <h4>Our culture & code of conduct</h4> <p>At ZainTECH, we take pride in a culture built on collaboration, innovation, and uncompromising integrity. We are looking for individuals who share these values and are committed to customer-centricity and ethical excellence. All employees are expected to uphold our Code of Conduct, which serves as a guiding framework for responsible behaviour across everything we do — from how we work with each other to how we engage with clients and partners globally.</p> <h4>Requirements</h4> <ul> <li>Bachelor's degree in Computer Engineering, Computer Science, Information Security, Information Technology, or a related field, with a minimum of 5 years of experience in cybersecurity and network security engineering.</li> <li>Proven hands-on expertise in designing, implementing, and supporting Fortinet security solutions, including FortiGate, FortiManager, FortiAnalyzer, SD-WAN, SASE, FortiWeb, FortiADC, FortiPAM, FortiProxy, FortiDLP, and FortiSIEM.</li> <li>Strong knowledge of network security architecture and infrastructure design, with expertise in TCP/IP, Routing & Switching, BGP, OSPF, VLANs, NAT, Traffic Shaping, and Policy-Based Routing.</li> <li>Advanced troubleshooting, analytical, and problem-solving skills, with experience supporting complex enterprise, managed services, or service provider environments.</li> <li>Strong customer-facing communication, presentation, consulting, and technical advisory skills, with the ability to engage effectively with stakeholders across all levels.</li> <li>Demonstrated technical leadership, mentoring capabilities, and experience managing project delivery while coordinating with multiple stakeholders.</li> <li>Solid understanding of security operations, incident response processes, and managed security services, including exposure to Zero Trust and cloud security architectures.</li> <li>Experience working with virtualization and cloud platforms such as VMware ESXi, Hyper-V, AWS, and Microsoft Azure, preferably within large-scale enterprise or multi-site environments.</li> <li>Strong documentation, reporting, and operational governance skills, with the ability to perform effectively in high-pressure environments and participate in critical incident response activities when required.</li> <li>Relevant certifications such as FCP, FCSS, NSE 4/5/6/7, CCNA, CCNP Security, FortiSASE, and AWS/Azure Security certifications, along with a commitment to continuous learning and professional development.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking enthusiastic, dynamic and committed Security Professionals who want to move their career forward along with the growth of the company.<br><br>As a Security Manager you are responsible to administer, direct and review security operation programs to ensure a safe and secure environment for employees and guests, as well as for all hotel assets, whereby your role will include key responsibilities such as:<br>• Advise management in improving and carrying out policies in accordance with security and institutional, state and legal regulations<br>• Ensure that all hotel areas and the complete property are adequately secured at all times<br>• Direct preparation and distribution of written and verbal information to inform managers, employees and others of security policies, procedures and practices <br>• Manage the design and development of specialized training to guide security officers and others through security decisions and actions<br>• Represent the hotel in formal meetings with outside organizations on matters dealing with security and protective services<br>• Ensure that all allegations of the crime and other incidents are investigated and recorded<br>• Prepare annual security goals <br>• Be familiar with the anti-terrorist and bomb threat prevention procedures in order to manage the team with prompt assistance in case of an accident, fire or other emergency</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Install, maintain, perform preventative maintenance on, and recommend replacement of tools, appliances, and equipment. Calibrate all controls, gauges, meters, etc. Identify, locate, and operate all shut-off valves. Order, mark, and stock parts and supplies as needed. Maintain inventory and purchase orders log. Inspect tools, equipment, or machines. Enter and locate work-related information using computers. Operate power lift. Complete the life safety checklist, including the fire-pump run test and generator run test. Inspect fire sprinkler valves and alarm systems. Assist in development of disaster response protocols. Respond and attend to guest repair requests.<br>Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees. Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional and maintain confidentiality of proprietary information. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, and assist individuals with disabilities. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Speak with others using clear and professional language. Visually inspect tools, equipment, or machines. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Grasp, turn, and manipulate objects of varying size and weight. Stand, sit, or walk for an extended period of time. Move up and down stairs and/or service ramps. Perform other reasonable job duties as requested by Supervisors.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: Technical, Trade, or Vocational School Degree.<br>Related Work Experience: At least 2 years of related work experience.<br>Supervisory Experience: At least 2 years of supervisory experience.<br>License or Certification: None&nbsp;<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>When you join the Sheraton family, you become a member of its global community. We’ve been a place to gather&nbsp;and connect since 1937. At Sheraton, associates create a sense of belonging in more than 400 communities around the world. We invite, we welcome, and we connect guests through engaging experiences and thoughtful service. If you’re a team player who is excited to deliver&nbsp;a&nbsp;meaningful guest experience, we encourage you to explore&nbsp;your next career opportunity&nbsp;with Sheraton. Join us on our mission to be ‘The World’s Gathering Place’. In joining Sheraton Hotels &amp; Resorts, you join a portfolio of brands with Marriott International. Be where you can do your best work,​&nbsp;begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<p><h4>Job role - principal electrical design engineer – mission critical (data centres)</h4> <p>Verbal and written communication in English is mandatory.</p> <p><strong>Strong experience</strong></p> <ul> <li>Uptime Tier III/IV data center design experience</li> <li>MV/LV, UPS & generator design expertise</li> <li>Data center standards knowledge (Uptime/TIA-942/NFPA)</li> <li>Client-facing leadership and stakeholder management experience</li> </ul> <p><strong>Responsibilities</strong></p> <ul> <li>Translate client requirements into robust electrical designs, including electrical distribution (medium and low voltage), generator, UPS systems, switchgear, busducts, grounding schemes, power monitoring systems, fire detection and alarm system etc.</li> <li>Produce all technical documentation: calculations, system studies, single-line diagrams, layout drawings, specifications, block schematics, and compliance tables.</li> <li>Lead conceptual and detailed design reviews, leveraging advanced analytical tools, BIM/Revit models, and coordination with architectural, mechanical, and building technology disciplines.</li> <li>Mentor and develop junior engineers, share best practices in mission-critical electrical systems, and drive continuous improvement across the design team.</li> <li>Collaborate closely with regional and global teams to grow consulting capabilities and ensure alignment with global design standards.</li> <li>Develop and standardize scalable, repeatable data center solutions to drive consistency and efficiencies across UAE and KSA.</li> <li>Conduct site assessments, capacity planning, and feasibility studies aligned with Uptime Institute Tier requirements.</li> <li>Ensure compliance with international standards (Uptime Institute, TIA-942, NFPA, ASHRAE) and local regulations.</li> <li>Drive business growth by contributing to technical proposals, client presentations, and by identifying opportunities for service enhancements.</li> </ul> <p><strong>Qualifications</strong></p> <ul> <li>Bachelor’s or master’s degree in electrical engineering.</li> <li>10+ years of progressive electrical experience in planning, designing, and delivering large-scale data centers, including multiple Uptime Tier III/IV projects.</li> <li>Demonstrated ability to coordinate with stakeholders in complex, matrixed environments.</li> <li>Professional certifications such as Uptime Tier Certified Professional, PMP, LEED AP, or BICSI RCDD are highly desirable.</li> <li>In-depth knowledge of data centres electrical infrastructure, power distribution topologies, servers, storage, network systems, SCADA systems, power management, ELV, and security.</li> <li>Experienced in data center construction phasing and associated design planning.</li> <li>Strong communication skills for effective client presentations, stakeholder workshops, and cross-functional coordination.</li> <li>Familiarity with local and international codes and standards, including NEC, IEC, ISO 50001, ISO 27001, PDPL, and ESMA.</li> </ul> <p>With over 90 years' combined experience, NES Fircroft is proud to be the world's leading engineering staffing provider spanning the oil & gas, power & renewables, chemicals, construction & infrastructure, life sciences, mining and manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong><strong> Job Description<br>Job Role - Principal Electrical Design Engineer – Mission Critical (Data Centres)<br>Verbal and written communication in English is mandatory<br> Strong Experience-&nbsp;</strong></strong><ul><li>Uptime Tier III/IV Data Center Design Experience</li><li>MV/LV, UPS &amp; Generator Design Expertise</li><li>Data Center Standards Knowledge (Uptime/TIA-942/NFPA)</li><li>Client-Facing Leadership and Stakeholder Management Experience</li></ul><strong><br> Responsibilities</strong><br><ul><li>Translate client requirements into robust electrical designs, including electrical distribution (medium and low voltage), generator, UPS systems, switchgear, busducts, grounding schemes, power monitoring systems, fire detection and alarm system etc.</li><li>Produce all technical documentation: calculations, system studies, single-line diagrams, layout drawings, specifications, block schematics, and compliance tables.</li><li>Lead conceptual and detailed design reviews, leveraging advanced analytical tools, BIM/Revit models, and coordination with architectural, mechanical, and building technology disciplines.</li><li>Mentor and develop junior engineers, share best practices in mission-critical electrical systems, and drive continuous improvement across the design team.</li><li>Collaborate closely with regional and global teams to grow consulting capabilities and ensure alignment with global design standards</li><li>Develop and standardize scalable, repeatable data center solutions to drive consistency and efficiencies across UAE and KSA.</li><li>Conduct site assessments, capacity planning, and feasibility studies aligned with Uptime Institute Tier requirements.</li><li>Ensure compliance with international standards (Uptime Institute, TIA-942, NFPA, ASHRAE) and local regulations.</li><li>Drive business growth by contributing to technical proposals, client presentations, and by identifying opportunities for service enhancements&nbsp;</li></ul><strong>Qualifications</strong><br><ul><li>Bachelor’s or Master’s degree in Electrical Engineering.</li><li>10+ years of progressive electrical experience in planning, designing, and delivering large-scale data centers, including multiple Uptime Tier III/IV projects.</li><li>Demonstrated ability to coordinate with stakeholders in complex, matrixed environments.</li><li>Professional certifications such as Uptime Tier Certified Professional, PMP, LEED AP, or BICSI RCDD are highly desirable.</li><li>In-depth knowledge of Data Centres Electrical infrastructure, Power distribution topologies, servers, storage, network systems, SCADA systems, power management, ELV, and security.</li><li>Experienced in data center construction phasing and associated design planning.</li><li>Strong communication skills for effective client presentations, stakeholder workshops, and cross-functional coordination.</li><li>Familiarity with local and international codes and standards, including NEC, IEC, ISO 50001, ISO 27001, PDPL, and ESMA.<br> &nbsp;</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p><h4>Description</h4> <p>The Specialist Security Engineer – Fortinet Solutions is responsible for designing, implementing, optimizing, and supporting advanced Fortinet-based cybersecurity solutions across enterprise, service provider, and data center environments. The role serves as a technical subject matter expert for Fortinet technologies, providing architecture design, deployment leadership, troubleshooting, migration support, and operational excellence across customer environments.</p> <p>Working within ZainTECH’s Cybersecurity Practice, the Specialist Security Engineer will lead the delivery of secure, scalable, and resilient security solutions covering network security, SD-WAN, SASE, Zero Trust architectures, privileged access management, web application security, and security monitoring platforms. The role collaborates closely with customers, presales teams, project delivery teams, and technology partners to ensure successful implementation and ongoing optimization of Fortinet security solutions.</p> <h4>Responsibilities</h4> <p><strong>Security architecture & solution design</strong></p> <ul> <li>Design and implement enterprise and data center security architectures utilizing Fortinet technologies.</li> <li>Develop secure, scalable, and highly available security solutions aligned with customer business and security requirements.</li> <li>Design and architect High Availability (HA) deployments, advanced SD-WAN solutions, Secure Access Service Edge (SASE) architectures, Zero Trust Network Access (ZTNA) environments, network segmentation and micro-segmentation strategies.</li> <li>Conduct security assessments and provide recommendations aligned with cybersecurity best practices and industry standards.</li> <li>Develop High-Level Designs (HLDs), Low-Level Designs (LLDs), migration and implementation plans, technical architecture documentation.</li> </ul> <p><strong>Fortinet solution deployment & integration</strong></p> <ul> <li>Lead the installation, configuration, migration, and optimization of Fortinet solutions including: <ul> <li>FortiGate</li> <li>FortiManager</li> <li>FortiAnalyzer</li> <li>FortiSwitch</li> <li>FortiAP</li> <li>FortiWeb</li> <li>FortiADC</li> <li>FortiPAM</li> <li>FortiProxy</li> <li>FortiDLP</li> <li>FortiSIEM</li> <li>FortiSASE</li> <li>FortiAppSec</li> </ul> </li> <li>Integrate Fortinet platforms with: <ul> <li>Active Directory</li> <li>LDAP</li> <li>RADIUS</li> <li>TACACS+</li> <li>Identity Providers (IdPs)</li> <li>Multi-Factor Authentication (MFA) platforms</li> <li>SIEM and Syslog solutions</li> <li>AWS and Microsoft Azure environments</li> <li>Third-party security solutions</li> </ul> </li> <li>Ensure successful migration and interoperability between legacy and modern security infrastructures.</li> </ul> <p><strong>Security operations & technical support</strong></p> <ul> <li>Provide advanced L2, L3, and escalation support for enterprise customers.</li> <li>Troubleshoot complex: <ul> <li>Security incidents</li> <li>Firewall issues</li> <li>Routing and connectivity problems</li> <li>VPN-related issues</li> <li>Authentication and access control challenges</li> </ul> </li> <li>Conduct root cause analysis and provide recommendations to prevent recurrence.</li> <li>Monitor solution performance and ensure high service availability.</li> <li>Maintain configuration backups, disaster recovery plans, and operational documentation.</li> <li>Support customers during critical incidents and major service disruptions.</li> </ul> <p><strong>Network security & advanced security technologies</strong></p> <ul> <li>Configure, manage, and optimize: <ul> <li>Security policies</li> <li>Application control</li> <li>Intrusion Prevention Systems (IPS)</li> <li>Web filtering</li> <li>Anti-malware services</li> <li>Data Loss Prevention (DLP)</li> <li>Proxy services</li> <li>Privileged Access Management (PAM)</li> <li>Security event monitoring and correlation</li> </ul> </li> <li>Deploy and support: <ul> <li>Psec VPN</li> <li>SSL VPN</li> <li>Remote Internet Access (RIA)</li> <li>Direct Internet Access (DIA)</li> <li>Site-to-Site VPNs</li> <li>Hub-and-Spoke VPN architectures</li> </ul> </li> <li>Implement Zero Trust and SASE security models to enhance customer security posture.</li> </ul> <p><strong>Project delivery & customer engagement</strong></p> <ul> <li>Lead implementation, migration, upgrade, and optimization projects.</li> <li>Coordinate activities with customers, vendors, project managers, internal delivery teams.</li> <li>Produce technical implementation documentation, acceptance reports, as-built documentation, operational handover documentation.</li> <li>Conduct customer knowledge transfer sessions and technical workshops.</li> <li>Support presales teams during solution presentations, technical discussions, and proof-of-concept activities.</li> </ul> <p><strong>Continuous improvement & technical leadership</strong></p> <ul> <li>Stay current with emerging cybersecurity threats, Fortinet product developments, and industry best practices.</li> <li>Participate in technical enablement and knowledge-sharing initiatives.</li> <li>Support the development of technical standards, implementation methodologies, and operational procedures.</li> <li>Contribute to service improvement initiatives across the Cybersecurity Practice.</li> </ul> <h4>Our culture & code of conduct</h4> <p>At ZainTECH, we take pride in a culture built on collaboration, innovation, and uncompromising integrity. We are looking for individuals who share these values and are committed to customer-centricity and ethical excellence. All employees are expected to uphold our Code of Conduct, which serves as a guiding framework for responsible behaviour across everything we do — from how we work with each other to how we engage with clients and partners globally.</p> <h4>Requirements</h4> <ul> <li>Bachelor's degree in Computer Engineering, Computer Science, Information Security, Information Technology, or a related field, with a minimum of 5 years of experience in cybersecurity and network security engineering.</li> <li>Proven hands-on expertise in designing, implementing, and supporting Fortinet security solutions, including FortiGate, FortiManager, FortiAnalyzer, SD-WAN, SASE, FortiWeb, FortiADC, FortiPAM, FortiProxy, FortiDLP, and FortiSIEM.</li> <li>Strong knowledge of network security architecture and infrastructure design, with expertise in TCP/IP, Routing & Switching, BGP, OSPF, VLANs, NAT, Traffic Shaping, and Policy-Based Routing.</li> <li>Advanced troubleshooting, analytical, and problem-solving skills, with experience supporting complex enterprise, managed services, or service provider environments.</li> <li>Strong customer-facing communication, presentation, consulting, and technical advisory skills, with the ability to engage effectively with stakeholders across all levels.</li> <li>Demonstrated technical leadership, mentoring capabilities, and experience managing project delivery while coordinating with multiple stakeholders.</li> <li>Solid understanding of security operations, incident response processes, and managed security services, including exposure to Zero Trust and cloud security architectures.</li> <li>Experience working with virtualization and cloud platforms such as VMware ESXi, Hyper-V, AWS, and Microsoft Azure, preferably within large-scale enterprise or multi-site environments.</li> <li>Strong documentation, reporting, and operational governance skills, with the ability to perform effectively in high-pressure environments and participate in critical incident response activities when required.</li> <li>Relevant certifications such as FCP, FCSS, NSE 4/5/6/7, CCNA, CCNP Security, FortiSASE, and AWS/Azure Security certifications, along with a commitment to continuous learning and professional development.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p><strong>Job role - Senior/Principal MEP Engineer (Building Services)</strong><br> Verbal and written communication in English is mandatory.</p> <p><strong>Strong experience:</strong></p> <ul> <li>8–15 years of mechanical building services design experience</li> <li>Strong HVAC design background</li> <li>Commercial, residential, mixed-use project experience</li> <li>ASHRAE and NFPA knowledge</li> <li>GCC/Middle East project experience</li> </ul> <p><strong>Responsibilities:</strong></p> <ul> <li>Support and deliver mechanical design packages for building services projects</li> <li>Work on HVAC, plumbing, drainage, and fire protection systems</li> <li>Ensure designs comply with international codes (ASHRAE, NFPA, BS) and local authority requirements</li> <li>Contribute to sustainable design solutions, including energy-efficient systems</li> <li>Coordinate with multidisciplinary teams, clients, and contractors</li> <li>Prepare and review technical deliverables</li> <li>Support project delivery from concept through to commissioning</li> </ul> <p><strong>Requirements:</strong></p> <ul> <li>Bachelor’s degree in Mechanical Engineering</li> <li>8–15 years of experience in mechanical building services design</li> <li>Good knowledge of international standards and local authority requirements</li> <li>Experience working on building projects (commercial, residential, mixed-use)</li> <li>Strong coordination and communication skills</li> <li>Middle East experience preferred</li> </ul> <p>With over 90 years' combined experience, NES Fircroft is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining, and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Company Description Join a hotel that is a member of the Accor network, whose group brings together more than 45 brands, 5,500 hotels, 10,000 restaurants and lifestyle destinations. Here, we believe in you and what you bring to the table. There are many opportunities for development and advancement. Every gesture, every smile, every action, contributes to creating a positive and memorable impact for our customers, our colleagues and also for our planet. Together, we embody the vision of responsible hospitality. Take the opportunity to become a Heartist , and let your heart guide you in this world where life beats faster.</p><p>Job Description Job Summary The Security Agent is responsible for maintaining a safe, secure, and welcoming environment for guests, Heartists, visitors, and hotel assets. The role ensures the protection of people and property through regular patrols, monitoring security systems, enforcing hotel policies, responding to emergencies, and providing professional assistance while upholding Accor's values and service standards.</p><p>Key Responsibilities</p><p>Safety &amp; Security</p><ul><li>Patrol all hotel areas, including guest floors, public areas, back-of-house, parking areas, and perimeter.</li><li>Monitor CCTV systems, alarms, and access control systems.</li><li>Protect hotel assets against theft, damage, vandalism, and unauthorized access.</li><li>Ensure all emergency exits, fire equipment, and escape routes remain accessible.</li><li>Conduct routine security inspections and report any hazards immediately.</li><li>Assist in implementing hotel security procedures and emergency response plans.</li></ul><p>Guest &amp; Heartist Assistance</p><ul><li>Provide courteous assistance to guests, Heartists, and visitors.</li><li>Escort guests or employees when required.</li><li>Respond promptly to guest concerns related to safety and security.</li><li>Maintain a professional and approachable presence throughout the property.</li></ul><p>Incident Management</p><ul><li>Respond immediately to emergencies including fire alarms, medical incidents, accidents, disturbances, and security breaches.</li><li>Complete detailed incident and occurrence reports accurately and promptly.</li><li>Preserve evidence and assist management during investigations when necessary.</li><li>Coordinate with local authorities, police, fire department, and emergency services when required.</li></ul><p>Access Control</p><ul><li>Monitor staff entrances and exits.</li><li>Verify identification of contractors and visitors.</li><li>Ensure delivery vehicles and suppliers follow hotel security procedures.</li><li>Control access to restricted areas.</li></ul><p>Fire &amp; Life Safety</p><ul><li>Participate in fire drills and emergency evacuation procedures.</li><li>Monitor compliance with fire safety regulations.</li><li>Assist with emergency evacuations when required.</li><li>Report any fire safety deficiencies immediately.</li></ul><p>Administrative Duties</p><ul><li>Maintain accurate daily security logs.</li><li>Prepare incident, accident, and shift reports.</li><li>Record lost and found items according to hotel procedures.</li><li>Communicate security concerns during shift handovers.</li></ul><p>Compliance</p><ul><li>Follow all Accor policies, hotel standards, and local regulations.</li><li>Maintain confidentiality regarding guests, Heartists, and hotel operations.</li><li>Comply with Health &amp; Safety, Food Safety (where applicable), environmental, and security policies.</li></ul><p>Qualifications</p><ul><li>High school diploma or equivalent.</li><li>Previous experience in hotel security, hospitality, military, or law enforcement is preferred.</li><li>Valid security certification or license (where required by local regulations).</li><li>Basic knowledge of fire safety and emergency procedures.</li></ul><p>Skills &amp; Competencies</p><ul><li>Strong observation and attention to detail.</li><li>Excellent communication and interpersonal skills.</li><li>Ability to remain calm under pressure.</li><li>Professional appearance and conduct.</li><li>Good problem-solving and conflict resolution skills.</li><li>Ability to write clear and accurate reports.</li><li>Basic computer skills.</li><li>Ability to work rotating shifts, weekends, public holidays, and overnight.</li></ul><p>Physical Requirements</p><ul><li>Ability to stand and walk for extended periods.</li><li>Ability to respond quickly to emergencies.</li><li>Capable of lifting moderate weights when required.</li><li>Ability to work indoors and outdoors in varying weather conditions.</li></ul><p>Core Competencies (Accor Values)</p><ul><li>Guest Passion</li><li>Sustainable Performance</li><li>Spirit of Conquest</li><li>Innovation</li><li>Respect</li><li>Trust</li></ul><p>Key Performance Indicators (KPIs)</p><ul><li>Timely response to security incidents.</li><li>Accuracy and completion of incident reports.</li><li>Compliance with security patrol schedules.</li><li>Reduction in security-related incidents.</li><li>Compliance with fire and life safety procedures.</li><li>Positive guest and Heartist feedback regarding safety and professionalism.</li><li>Adherence to Accor security standards and local regulations.</li></ul><p>This job description reflects the responsibilities and expectations of a Security Agent within an Accor hotel and may be updated based on operational requirements.</p><p>Qualifications Your experience and skills include:</p><ul><li>Relevant security experience is an asset</li><li>Strong interpersonal and problem solving abilities</li><li>Highly responsible &amp; reliable</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent.</li><li>Previous experience in hotel security, hospitality, military, or law enforcement is preferred.</li><li>Valid security certification or license (where required by local regulations).</li><li>Basic knowledge of fire safety and emergency procedures.</li><li>Strong observation and attention to detail.</li><li>Excellent communication and interpersonal skills.</li><li>Ability to remain calm under pressure.</li><li>Professional appearance and conduct.</li><li>Good problem-solving and conflict resolution skills.</li><li>Ability to write clear and accurate reports.</li><li>Basic computer skills.</li><li>Ability to work rotating shifts, weekends, public holidays, and overnight.</li><li>Ability to stand and walk for extended periods.</li><li>Ability to respond quickly to emergencies.</li><li>Capable of lifting moderate weights when required.</li><li>Ability to work indoors and outdoors in varying weather conditions.</li><li>Relevant security experience is an asset</li><li>Strong interpersonal and problem solving abilities</li><li>Highly responsible &amp; reliable</li></ul><p></p></section>

<p><h4>Position summary</h4> <p>Install, maintain, perform preventative maintenance on, and recommend replacement of tools, appliances, and equipment. Calibrate all controls, gauges, meters, etc. Identify, locate, and operate all shut-off valves. Order, mark, and stock parts and supplies as needed. Maintain inventory and purchase orders log. Inspect tools, equipment, or machines. Enter and locate work-related information using computers. Operate power lift. Complete the life safety checklist, including the fire-pump run test and generator run test. Inspect fire sprinkler valves and alarm systems. Assist in development of disaster response protocols. Respond and attend to guest repair requests.</p> <p>Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees. Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional and maintain confidentiality of proprietary information. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, and assist individuals with disabilities. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Speak with others using clear and professional language. Visually inspect tools, equipment, or machines. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Grasp, turn, and manipulate objects of varying size and weight. Stand, sit, or walk for an extended period of time. Move up and down stairs and/or service ramps. Perform other reasonable job duties as requested by supervisors.</p> <h4>Preferred qualifications</h4> <ul> <li>Education: Technical, trade, or vocational school degree.</li> <li>Related work experience: At least 2 years of related work experience.</li> <li>Supervisory experience: At least 2 years of supervisory experience.</li> <li>License or certification: None.</li> </ul> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>When you join the Sheraton family, you become a member of its global community. We’ve been a place to gather and connect since 1937. At Sheraton, associates create a sense of belonging in more than 400 communities around the world. We invite, we welcome, and we connect guests through engaging experiences and thoughtful service. If you’re a team player who is excited to deliver a meaningful guest experience, we encourage you to explore your next career opportunity with Sheraton. Join us on our mission to be ‘The World’s Gathering Place’. In joining Sheraton Hotels & Resorts, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<br><p>We are looking for an experienced <strong>Safety Manager</strong> to lead and manage all Health, Safety, and Fire Protection activities within a textile manufacturing facility in Jordan. The ideal candidate should have a strong background in industrial safety, fire prevention, risk assessment, and regulatory compliance, with <strong>NFPA certification</strong> being mandatory.</p><br><p><strong>Desired Candidate Profile</strong></p><br><ul><li><p>Minimum 10 years of relevant experience.</p></li><li><p>NFPA Certification is mandatory.</p></li><li><p>Prior experience in the Textile industry is preferred.</p></li><li><p>Indian nationals only.</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Patrol all areas of the property; assist guests with room access. Monitor Closed Circuit Televisions, perimeter alarm system, duress alarms, and fire life safety system. Lock property entrances when required. Conduct daily physical hazard inspections. Respond to accidents, contact EMS or administer first aid/CPR as required. Assist guests/employees during emergency situations. Notify appropriate individuals in the event of accidents, attacks, or other incidents. Defuse guest/employee disturbances. Call for outside assistance if necessary. Complete incident reports to document all Security/Loss Prevention related incidents. Handle all interruptions and complaints. Resolve safety hazard situations. Escort any unwelcome persons from the property without interrupting the orderly flow of property operation. Report to scenes of vehicle accidents/thefts. Call for assistance using proper code responses. Complete a Loss Prevention shift summary/daily activity report. Maintain confidentiality of all Security/Loss Prevention and property reports/documents; release information only to authorized individuals. Conduct investigations and gather evidence. Conduct interviews with relevant parties.<br>Follow all company policies and procedures; report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge all guests according to company standards; anticipate and address guests’ service needs; assist individuals with disabilities; thank guests with genuine appreciation. Speak with others using clear and professional language; prepare and review written documents accurately and completely. Develop and maintain positive working relationships with others; support team to reach common goals. Comply with quality assurance expectations and standards. Stand, sit, or walk for an extended period of time. In addition, some states may have additional licensing/registration requirements to be considered for this position. Read and visually verify information in a variety of formats (e.g., small print). Visually inspect tools, equipment, or machines (e.g., to identify defects). Enter and locate work-related information using computers and/or point of sale systems. Move at a speed required to respond to work situations (e.g., run, walk, jog). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and objects weighing in excess of 75 pounds with assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move through narrow, confined, or elevated spaces. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.<br>PREFERRED QUALIFICATIONS<br>Education: High school diploma or G.E.D. equivalent.<br>Related Work Experience: No related work experience.<br>Supervisory Experience: No supervisory experience.<br>License or Certification: None<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand’s unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>JOB SUMMARY Assists department head in managing budget, capital expenditures, preventative maintenance and energy conservation. Accountable for maintaining the building and grounds with particular attention towards safety, security and asset protection. Assigns, tracks and follows up on status of work assigned to staff and contractors. Helps to increase guest and employee satisfaction through effective communications and training.</p><p>CORE WORK ACTIVIITES</p><p>Supporting management of Property Operations</p><ul><li>Supervises distribution of repair work orders.</li><li>Ensures property policies are administered fairly and consistently.</li><li>Assists in effectively planning, scheduling and evaluating preventative maintenance programs.</li><li>Establishes and maintains open, collaborative relationships with employees.</li><li>Monitors timeliness and quality of completion of repair work orders.</li><li>Supervises Engineering and related areas in absence of the Director of Engineering.</li><li>Assists in managing the physical plant including equipment, refrigeration, HVAC, plumbing, water treatment, electrical and life safety systems.</li><li>Ensures that regular on-going communication occurs with employees in order to create awareness of business objectives, communicate expectations and recognize performance.</li><li>Recommends or arranges for additional services such as painting, repair work, renovations, and the replacement of furnishings and equipment.</li><li>Selects and order or purchase new equipment, supplies, and furnishings.</li><li>Supervises the day to day operations of Engineering and related departments.</li></ul><p>Maintaining Property Standards</p><ul><li>Inspect and evaluate the physical condition of facilities in order to determine the type of work required.</li><li>Maintains accurate logs and records as required.</li><li>Operates generators and fire pumps as necessary.</li><li>Provides emergency response services 24/7.</li><li>Repairs equipment (e.g., refrigeration, laundry) as necessary.</li><li>Ensures all employees have the proper supplies, equipment and uniforms.</li></ul><p>Ensuring Exceptional Customer Service</p><ul><li>Empowers employees to provide excellent customer service.</li><li>Emphasizes guest satisfaction during all departmental meetings and focuses on continuous improvement.</li><li>Sets a positive example for guest relations.</li></ul><p>Conducting Human Resources Activities</p><ul><li>Helps train employees in safety procedures.</li><li>Supports a departmental orientation program for employees to receive the appropriate new hire training to successfully perform their job.</li><li>Communicates performance expectations in accordance with job descriptions for each position.</li><li>Ensures disciplinary procedures and documentation are completed according to Standard and Local Operating Procedures (SOPs and LSOPs) and support the Peer Review Process.</li><li>Assists as needed in the interviewing and hiring of employee team members with the appropriate skills.</li><li>Participates in the employee performance appraisal process, providing feedback as needed.</li><li>Uses all available on the job training tools for employees.</li><li>Solicits employee feedback.</li><li>Supervises staffing levels to ensure that guest service, operational needs and financial objectives are met.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or GED; 4 years experience in the engineering and maintenance or related professional area; technical training in HVAC-R/electrical/plumbing. OR 2-year degree from an accredited university in Building and Construction, Engineering, Mechanics, or related major; 2 years experience in the engineering and maintenance or related professional area; technical training in HVAC-R/electrical/plumbing.</li></ul><p></p></section>

<p><h4>Description</h4> <p>Mindrift is looking for highly skilled senior Python data scraping engineers to join the Tendem project and drive specialized data scraping workflows within our hybrid AI + human system.</p> <p>In this role, as an AI pilot – that’s how we refer to this role at Mindrift – you’ll collaborate with Tendem agents that handle repetitive tasks, while you provide critical thinking, domain expertise, and quality control to deliver accurate and actionable results.</p> <p>This part-time remote opportunity is ideal for technical professionals with hands-on experience in web scraping, data extraction, and processing.</p> <h4>What we do</h4> <p>The Mindrift platform connects specialists with AI projects from major tech innovators. Our mission is to unlock the potential of generative AI by tapping into real-world expertise from across the globe.</p> <p>This is a freelance role for a Tendem project. As a senior Python data scraping engineer, you'll handle data scraping tasks requiring technical precision for web extraction and processing, utilizing various tools such as our provided Apify and OpenRouter alongside your own resourceful approaches.</p> <h4>Key responsibilities:</h4> <ul> <li>Own end-to-end data extraction workflows across complex websites, ensuring complete coverage, accuracy, and reliable delivery of structured datasets.</li> <li>Leverage internal tools (Apify, OpenRouter) alongside custom workflows to accelerate data collection, validation, and task execution while meeting defined requirements.</li> <li>Ensure reliable extraction from dynamic and interactive web sources, adapting approaches as needed to handle JavaScript-rendered content and changing site behavior.</li> <li>Enforce data quality standards through validation checks, cross-source consistency controls, adherence to formatting specifications, and systematic verification prior to delivery.</li> <li>Scale scraping operations for large datasets using efficient batching or parallelization, monitor failures, and maintain stability against minor site structure changes.</li> </ul> <h4>Requirements:</h4> <ul> <li>At least 5+ years of relevant experience in data engineering, web scraping, automation, or software development (required).</li> <li>Bachelor’s or master’s degree in engineering, applied mathematics, computer science, or related technical fields is a plus.</li> <li>Candidates should have a strong technical foundation and practical experience with scripting, automation, and AI-assisted workflows. We are looking for specialists who can solve non-trivial problems, work confidently with LLMs, and systematically collect, structure, and validate data from diverse sources. A methodical, detail-oriented approach and the ability to work independently are essential.</li> <li>Strong experience in Python web scraping (BeautifulSoup, Selenium or similar), including dynamic content (JS, AJAX, infinite scroll) and APIs via proxies.</li> <li>Proven ability to extract data from complex structures (hierarchies, archived pages, inconsistent HTML).</li> <li>Solid background in data cleaning, normalization, and validation, delivering structured datasets (CSV, JSON, Google Sheets).</li> <li>Demonstrated experience handling anti-bot mechanisms and dynamic site structures at scale.</li> <li>Experience with cloud infrastructure (AWS or equivalent) and containerization (Docker) as part of real workflows.</li> <li>Hands-on experience with LLM frameworks (LangChain, OpenRouter, or similar) applied to automation tasks.</li> <li>Strong attention to detail and commitment to data accuracy.</li> <li>Self-directed work ethic with ability to troubleshoot independently.</li> <li>English proficiency: upper-intermediate (B2) or above (required).</li> </ul> <p>A link to GitHub is a plus.</p> <h4>Project time expectations</h4> <p>For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements. This is an estimate, not a guaranteed workload, and applies only while the project is active.</p> <h4>Compensation</h4> <p>On this project, contributors can earn up to $25 per hour equivalent, depending on their level and pace of contribution.</p> <p>Compensation varies across projects depending on scope, complexity, and required expertise. Please note that other projects on the platform may offer different earning levels based on their requirements.</p></p><p></p>