oil and gas jobs
108 Jobs Found
Confidential
Jordan - Amman
<p><h4>Job description</h4>
<p><strong>Job role - Principal engineer – mechanical – aviation buildings</strong><br>
Verbal and written communication in English is mandatory.</p>
<h4>Responsibilities:</h4>
<ul>
<li>Lead mechanical/HVAC design from feasibility and basis-of-design (BoD) through detailed design, tender and construction support for aviation facilities.</li>
<li>Own the environmental strategy for very large volumes (e.g., hangar bays): heating/cooling concepts, destratification, purge/exhaust modes, make-up air, and controls sequences—balancing energy, IAQ and safety (UFC/ASHRAE/NFPA context).</li>
<li>Engineer specialist ventilation for hazardous operations: paint spray booths/rooms, fuel-cell maintenance/purge ventilation, welding/fume extraction, VOC control, and hazardous-area interfaces with electrical/controls.</li>
<li>Integrate process utilities common to MRO and workshops.</li>
<li>Shape catering facility HVAC and hygienic air zones: kitchen exhaust and makeup air (NFPA 96), pressure cascades, temperature/humidity control for clean prep/packing.</li>
<li>Deliver BIM-led coordination (Revit/Navisworks) across architecture, structures, process, fire protection, and controls; lead clash resolution and model QA.</li>
<li>Run calculations and simulations: loads, duct/pipe sizing, ventilation rates, smoke/fume capture, and (where needed) CFD to support the thermal comfort studies.</li>
<li>Author technical documents: BoD, design reports, specifications, sequences of operation, control narratives, FAT/SAT/commissioning plans.</li>
<li>Engage stakeholders—airlines/MROs, airport operators, food safety teams, and authorities—to secure approvals and smooth delivery.</li>
<li>Lead retrofit, refurbishment, and brownfield upgrade projects within operational airport environments—assessing existing systems, developing phased upgrade strategies, ensuring minimal disruption to ongoing operations, and integrating new systems with legacy infrastructure while addressing capacity, compliance, and energy performance improvements.</li>
</ul>
<h4>Key systems and domains you’ll cover:</h4>
<ul>
<li>Hangars and workshops: general and emergency exhaust, purge ventilation for fuel system work, floor-level capture where required, destratification/ HVLS fans, door air management, radiant/air systems, PCA (pre-conditioned air) and GSE interfaces.</li>
<li>Catering facilities: high-duty kitchen exhaust and makeup air (hoods, MAUs, heat recovery), grease ducting, rooftop terminations, pressure zoning for hygiene, and interfaces to cold rooms/freezers and clean areas.</li>
<li>Experience in refurbishment projects, passenger terminal building mechanical design (HVAC, drainage systems) is preferred.</li>
</ul>
<h4>Qualifications:</h4>
<ul>
<li>Bachelor’s or master’s degree in mechanical engineering.</li>
<li>Professional registration (e.g., CEng/PE) strongly preferred.</li>
<li>15+ years’ experience in building services (mechanical/HVAC), with significant aviation project delivery (passenger terminal building, hangars, MRO shops, flight catering, or similar).</li>
<li>Proven leadership as lead/principal engineer on multi-disciplinary design projects and prior delivery in live airport environments (airside/landside interfaces, works phasing) is preferred.</li>
<li>Expertise writing BoDs, specifications, P&IDs, control sequences, etc.</li>
<li>BIM fluency: Revit, Navisworks; competence with calculations (e.g., IES-VE/HAP/eQuest), CFD exposure preferred.</li>
<li>Client-facing communication and team leadership; mentoring and QA/QC across multiple concurrent packages.</li>
<li>Strong communication skills for effective client presentations, stakeholder workshops, and cross-functional coordination.</li>
<li>Willingness to be based at Dammam Airport for the initial phase of the project (short-term assignment) and relocate to the main office upon project completion.</li>
</ul>
<p>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the oil & gas, power & renewables, chemicals, construction & infrastructure, life sciences, mining and manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>
NES Global Talent
Jordan
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<strong>Job Role -Principal Engineer – Electrical (Aviation) <br>Verbal and written communication in English is mandatory<br>Responsibilities:</strong><ul><li>Lead electrical design from feasibility and Basis of Design (BoD) through detailed design, tender and construction support for aviation facilities.</li><li>Own the electrical power strategy for large-scale facilities (e.g., hangar bays): MV/LV distribution, redundancy, load management, earthing, and control philosophies—balancing reliability, safety, and energy performance (IEC/NFPA context).</li><li>Engineer electrical systems for hazardous operations: paint booths/rooms, fuel-cell maintenance areas, welding zones—ensuring compliance with ATEX/IECEx and coordination with mechanical ventilation and controls.</li><li>Design and specify power systems for aviation facilities: transformers, generators, UPS, distribution boards, and backup systems for mission-critical operations.</li><li>Integrate electrical utilities across MRO and workshop environments—ground power units (GPU), PCA interfaces, process equipment loads, and coordination with mechanical, fire/life safety, and control systems.</li><li>Shape electrical systems for catering facilities: resilient power distribution for kitchens, cold-chain systems, and hygienic areas aligned with HACCP/ISO 22000 requirements.</li><li>Deliver BIM-led coordination (Revit/Navisworks) across architecture, structures, MEP, and specialist systems; lead clash resolution and model QA.</li><li>Perform calculations and studies: load estimation, cable sizing, protection coordination, short-circuit analysis, and lighting design.</li><li>Author technical documents: BoD, load schedules, single-line diagrams (SLDs), specifications, and commissioning plans.</li><li>Mentor and review engineers/designers; lead design reviews, HAZOPs, and constructability/operability workshops.</li><li>Engage stakeholders—airlines, MROs, airport operators, and authorities—to secure approvals and ensure smooth delivery.</li><li>Lead retrofit, refurbishment, and brownfield upgrades in operational airport environments—assessing existing systems, planning phased upgrades, and integrating new systems with minimal disruption while improving capacity, compliance, and energy performance.</li></ul><strong>Key systems & domains you’ll cover:</strong><ul><li>Hangars & workshops: MV/LV distribution, ground power units (GPU), PCA electrical interfaces, high-bay lighting, emergency power, earthing and bonding for aircraft safety, and hangar door electrics. </li><li>Paint/corrosion control: hazardous-area electrical systems, explosion-proof equipment, interlocks, LEL monitoring interfaces, and ATEX/IECEx compliance coordinated with ventilation and controls. </li><li>Welding & fabrication: power distribution for welding equipment, equipment earthing, task lighting, and integration with extraction/LEV systems aligned with OSHA/ACGIH guidance. </li><li>Power systems: transformers, generators, UPS, LV panels, and distribution networks designed for redundancy, resilience, and mission-critical operations. </li><li>Catering facilities: resilient power supply for kitchens, cold rooms/freezers, food processing areas, and hygienic zoning aligned with HACCP/ISO 22000 requirements. </li><li>ELV & controls: fire alarm systems (NFPA 72), ICT, security (CCTV/access control), structured cabling, and BMS/SCADA integration for operational monitoring and control.</li></ul><br> <strong>Qualifications:</strong><ul><li>Bachelor’s degree in electrical engineering; Master's degree preferred.</li><li>Professionally registered (CEng, PE, or equivalent).</li><li>15+ years' experience in electrical building services design, including aviation and complex infrastructure projects.</li><li>Demonstrated experience leading multidisciplinary design teams and delivering major projects.</li></ul><strong>Technical Expertise:</strong><ul><li>Strong knowledge of international electrical design codes, standards, and aviation requirements.</li><li>Expertise in MV/LV power distribution, load assessments, protection systems, and earthing design.</li><li>Proficiency in BIM and industry-standard design software, including Revit, Navisworks, ETAP, and Dialux.</li><li>Experience in airport facilities, terminal buildings, and aviation-related infrastructure is highly desirable</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>
NES Global Talent
Jordan
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<strong>Job description<br>Job Role -Principal Engineer – Mechanical – Aviation Buildings<br>Verbal and written communication in English is mandatory<br>Responsibilities:</strong><ul><li>Lead mechanical/HVAC design from feasibility and basis-of-design (BoD) through detailed design, tender and construction support for aviation facilities.</li><li>Own the environmental strategy for very large volumes (e.g., hangar bays): heating/cooling concepts, destratification, purge/exhaust modes, make-up air, and controls sequences—balancing energy, IAQ and safety. (UFC/ASHRAE/NFPA context).</li><li>Engineer specialist ventilation for hazardous operations: paint spray booths/rooms, fuel-cell maintenance/purge ventilation, welding/fume extraction, VOC control, and hazardous-area interfaces with electrical/controls.</li><li>Integrate process utilities common to MRO and workshops.</li><li>Shape catering facility HVAC and hygienic air zones: kitchen exhaust & makeup air (NFPA 96), pressure cascades, temperature/humidity control for clean prep/packing.</li><li>Deliver BIM-led coordination (Revit/Navisworks) across architecture, structures, process, fire protection, and controls; lead clash resolution and model QA.</li><li>Run calculations & simulations: loads, duct/pipe sizing, ventilation rates, smoke/fume capture, and (where needed) CFD to support the thermal comfort studies.</li><li>Author technical documents: BoD, design reports, specifications, sequences of operation, control narratives, FAT/SAT/commissioning plans.</li><li>Engage stakeholders—airlines/MROs, airport operators, food safety teams, and authorities—to secure approvals and smooth delivery.</li><li>Lead retrofit, refurbishment, and brownfield upgrade projects within operational airport environments—assessing existing systems, developing phased upgrade strategies, ensuring minimal disruption to ongoing operations, and integrating new systems with legacy infrastructure while addressing capacity, compliance, and energy performance improvements.<br> <br> </li></ul><strong>Key systems & domains you’ll cover:</strong><ul><li>Hangars & workshops: general and emergency exhaust, purge ventilation for fuel system work, floor-level capture where required, destratification/HVLS fans, door air management, radiant/air systems, PCA (pre-conditioned air) and GSE interfaces.</li><li>Catering facilities: high-duty kitchen exhaust & makeup air (hoods, MAUs, heat recovery), grease ducting, rooftop terminations, pressure zoning for hygiene, and interfaces to cold rooms/freezers and clean areas.</li><li>Experience in refurbishment projects, passenger terminal building Mechanical design (HVAC, Drainage systems) is preferred.<br> <br> </li></ul><strong>Qualifications:</strong><ul><li>Bachelor’s or Master’s degree in Mechanical Engineering.</li><li>Professional registration (e.g., CEng/PE) strongly preferred.</li><li>15+ years’ experience in building services (mechanical/HVAC), with significant aviation project delivery (Passenger terminal building, hangars, MRO shops, flight catering, or similar).</li><li>Proven leadership as Lead/Principal Engineer on multi-disciplinary design projects and Prior delivery in live airport environments (airside/landside interfaces, works phasing) is preferred.</li><li>Expertise writing BoDs, specifications, P&IDs, control sequences, etc.</li><li>BIM fluency: Revit, Navisworks; competence with calculations (e.g., IES-VE/HAP/eQuest),CFD exposure preferred.</li><li>Client-facing communication and team leadership; mentoring and QA/QC across multiple concurrent packages.</li><li>Strong communication skills for effective client presentations, stakeholder workshops, and cross-functional coordination.</li><li>Willingness to be based at Dammam Airport for the initial phase of the project (short-term assignment) and relocate to the main office upon project completion</li></ul><br>If you find this job matching your skills, please apply or share your CV on sayali.kothmire@nesfircroft.com<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>
Confidential
Jordan
</span></i></b></span></span></p>
<p align="center" dir="RTL" ><b><span ><span >مطلوب </span></span></b><b><span ><span >عمال مضخات</span></span></b><b><span ><span dir="LTR" ></span></span></b></p>
<p dir="RTL" ><span >تعلن المجموعة الوطنية للطاقة صاحبة العلامة التجارية<span dir="LTR" > Go Gas <span >عن حاجتها لتعيين عدد من<span > <span >عمال المضخات "<span dir="LTR" >Pump Operator<span >"<span dir="LTR" > <span >للعمل<span > ضمن كادرها في محطاتها المتواجدة في جميع محافظات المملكة: <span dir="LTR" ></span></span></span></span></span></span></span></span></span></span></span></p>
<p dir="RTL" ><b><span ><span >المهام والمتطلبات</span></span></b><b><span ><span dir="LTR" >:</span></span></b><b><span ><span dir="LTR" ></span></span></b></p>
<p dir="RTL" ><span >-<span >Â <span >تزويد المركبات بالوقود. <span dir="LTR" ></span></span></span></span></p>
<p dir="RTL" ><span >-<span >Â <span >خدمة الزبائن<span dir="LTR" >.</span></span></span></span></p>
<p dir="RTL" ><span >-<span >Â <span >المحافظة على نظافة وترتيب ساحات المحطات<span dir="LTR" >.</span></span></span></span></p>
<p dir="RTL" ><span >-<span >Â <span >أي مهام أخرى حسب تكليف المدير المباشر.<span dir="LTR" ></span></span></span></span></p>
<p dir="RTL" ><b><span ><span >المؤهلات المطلوبة:</span></span></b><b><span ><span ></span></span></b></p>
<p dir="RTL" ><span >-<span >Â <span >خبرة 0 - 3 سنوات كحد أدنى في المحطات.<span dir="LTR" >.</span></span></span></span></p>
<p dir="RTL" ><span >-<span >Â <span >شهادة توجيهي كحد أدنى.<span dir="LTR" ></span></span></span></span></p>
<p dir="RTL" ><span >-<span >Â <span >لديه روح القيادة وتحمل المسؤولية والعمل تحت الضغط.<span dir="LTR" ></span></span></span></span></p>
<p dir="RTL" ><span >-<span >Â <span >إدارة الوقت<span dir="LTR" > <span dir="LTR" ></span></span></span></span></span></p>
<p dir="RTL" ><span >-<span >Â <span >إجادة اللغة العربية بمستوى ممتاز (قراءة، كتابة، محادثة)</span></span></span></p>
<p dir="RTL" ><span >-<span >Â <span >مهارات الاتصال الفعال<span dir="LTR" >.<span ></span></span></span></span></span></p>
<p dir="RTL" ><span >-<span >Â <span >مهارات المراسلة الفعالة<span dir="LTR" >.<span ></span></span></span></span></span></p>
<p dir="RTL" ><span >-<span >Â <span >القدرة على العمل تحت الضغط<span dir="LTR" >.<span ></span></span></span></span></span></p>
<p dir="RTL" ><span >-<span >Â <span >القدرة على حل المشكلات<span dir="LTR" >.<span ></span></span></span></span></span></p>
<p dir="RTL" ><span >-<span >Â <span >مهارا ت العمل الجماعي.</span></span></span></p>
<p dir="RTL" ><span >-<span >Â <span >القدرة على التعامل مع الاخرين والصبر عند الحاجة.<span dir="LTR" ></span></span></span></span></p>
<p align="center" dir="RTL" ><b><span >على الراغبين في التقدم للوظيفة التواصل على ارقام مفتشي المناطق الواردة ارقامهم أدناه:</span></b><b><span dir="LTR" ></span></b></p>
<p align="center" dir="RTL" ><b><span >ثائر العامودي - مفتش منطقة غرب عمان – (0788004149).</span></b><b><span dir="LTR" ></span></b></p>
<p align="center" dir="RTL" ><b><span >علاء أبو عرقوب - مفتش منطقة شرق عمان – (0796193140).</span></b><b><span dir="LTR" ></span></b></p>
<p align="center" dir="RTL" ><b><span >حازم جرادات - مفتش منطقة الجنوب– (0799012049).</span></b><b><span dir="LTR" ></span></b></p>
<p align="center" dir="RTL" ><b><span >علاء مسلماني - مفتش منطقة الزرقاء واربد – (0796486499).</span></b><b><span dir="LTR" ></span></b></p>
Jordan - Amman
<p>Manage daily warehouse operations, ensuring safe, efficient, and compliant activities. Supervise the receiving, sampling, weighing, storage, and dispatch of Used Cooking Oil (UCO) and other feedstocks. Ensure inventory accuracy, proper storage utilization, and smooth shipping and product transfer operations. Monitor product quality and ensure compliance with SOPs, ISCC, HSE, and company standards. Supervise warehouse operators and track key operational KPIs. Coordinate with Logistics, Quality, and Commercial teams to ensure seamless operations. Maintain accurate warehouse records and drive continuous process improvements. Ensure all warehouse transactions are accurately recorded in the Tagaddod system to maintain inventory accuracy and traceability.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Engineering, Supply Chain, Logistics, Business Administration, or a related field. Fresh graduates are welcome; up to 2 years of relevant experience is a plus. Good communication, organizational, and problem-solving skills. Proficiency in Microsoft Office. Willingness to work 8-hour shifts, 6 days per week . Living in or nearby Amman</p>
Jordan
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><b>Date Posted:</b></p><br><br>2026-07-08&#xa;&#xa;<p><b>Country:</b></p><br><br>Jordan&#xa;&#xa;<p><b>Location:</b></p><br><br>JO-AM-AMMAN-183 ~ 183 Saqra Complex A ~ ARMADA TWR, Armada Tower, Arar Mustafa Wahbi Al Tal St., 1st Floor, Office 204 (External Site)&#xa;&#xa;<p><b>Position Role Type:</b></p><br><br>Unspecified<br><br><p>The Pratt & Whitney Customer Business organization has an exciting opportunity for a Field Service Representative (FSR) located at our Amman, Jordan field service office serving our customer Royal Jordanian and other regional customers. This position provides on-wing support for our customer and requires both technical expertise and the ability to build strong customer relationships. We are searching for a highly motivated and qualified individual to bolster the world class customer support we currently provide.</p><br><br><p>The position reports to the Customer Fleet Director, Middle East. This team interfaces with the customer powerplant engineering team, Customer Technical Service (CTS), and other responsible P&W organizations to ensure customer operations are supported smoothly. This is accomplished by providing the customer with access to the right tools and organizations within Pratt & Whitney for items such as engine troubleshooting, warranty claims, spare parts and repairs, spare engine allocations, MRO shops, and sales. The FSR also is the point of contact for internal departments to understand what is happening with the customer, using P&W tools daily such as Engine Wise Connect, EData+, and MS Dynamics.</p><br><br><br><p><b>Key responsibilities: </b></p><br><br><p><i><u>Technical in nature</u></i></p><br><br><ul><li>Provide the assigned customer(s) with technical and operational program support for various engine groups. This individual will be responsible for coordinating and managing on-wing operational issues, customer concerns, and provide 24-hour comprehensive technical support and customer assistance. A solid working knowledge of aviation gas turbine engines, along with troubleshooting expertise, are the key responsibilities.</li><li>Team player, able to take and give direction to expeditiously solve Customer issues</li><li>Effectively communicate in real time, both clearly and concisely, and in all forms</li><li>Ability to collaborate with other Field Representatives to advance solutions</li><li>Contributes to the business by applying knowledge and skills in multiple functional areas</li><li>The individual is expected to always “go beyond”, as PW customers depend on this level of service to achieve mutual success</li></ul><p><i><u>Customer relationship</u></i></p><br><br><ul><li>Operator’s first contact to address all technical and business concerns. The individual must be able to work with a full spectrum of an airline company’s staff, interfacing frequently with all customer employees, from Executives to Line Technicians. The individual should be comfortable representing Pratt & Whitney at key customer meetings.</li></ul><p><i><u>Ability to work independently</u></i></p><br><br><ul><li>This position requires 24/7 accessibility for the customer and will rely heavily on troubleshooting abilities with minimal supervision. Candidate must also collaborate with the P&W Hartford CFTs, CTS, and P&W colleagues to provide real time information to understand fleet risk. A successful candidate for this role needs to maintain a positive, empathetic, and engaging professional attitude toward customers and colleagues always.</li></ul><br><p><b><u>Experience/Qualifications</u></b></p><br><br><p><i><u>Basic Qualifications:</u></i></p><br><br><ul><li>Demonstrated technical proficiency with jet engine technical data</li><li>Associate’s degree in aviation related field, with aminimum 7 years of experience with commercial / military aircraft engines and directly working with / for airline customers, OR</li><li>Bachelor’s degree in engineering or aviation related field or equivalent, with a minimum of 5 years of experience with maintaining commercial / military aircraft engines and directly working with/for airline customers, OR</li><li>A master’s degree with 3 years of experience with maintaining commercial aircraft engines and directly working with / for airline customers</li><li>Experience in an external facing role</li><li>Demonstrated written and verbal communication skills</li></ul><p><i><u>Preferred Qualifications a plus: </u></i></p><br><br><ul><li>Familiarity with Airbus A320 aircraft manuals and OEM engine manuals</li><li>Familiarity with P&W Geared Turbofan engine</li><li>Previously held part 147 aviation maintenance A&P license or similar aircraft engine mechanic experience</li></ul><br><p>This position is located onsite at a P&W customer location. The candidate must be Jordanian national and not requiring any work authorization. Travel up to 20%. After hours onsite support may be required to support airline maintenance windows. The FSR is typically on call outside of core business hours with the support of P&W help desk, CTS, and the Customer Fleet Director.</p><br><br><br><p><b>Privacy Policy and Terms:</b></p><br><br><p>Click on this link to read the Policy and Terms</p><br><br><br><br><p><span><i>RTX adheres to the principles of equal employment. All qualified applications will be given careful consideration without regard to ethnicity, color, religion, gender, sexual orientation or identity, national origin, age, disability, protected veteran status or any other characteristic protected by law. </i> </span></p><br><br><br><br><p><b>Privacy Policy and Terms:</b></p><br><br><p><span>Click on this </span>link<span> to read the Policy and Terms</span></p><br><br><br> </div>
Amentum
Jordan - Amman
<p><h4>Job Description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p>
<p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p>
<p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p>
<p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p>
<p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p>
<p>USAF equivalent position is Aircraft Mechanic Apprentice.</p>
<h4>Essential Responsibilities:</h4>
<ul>
<li>Performs all daily launch/recovery duties in support of operational requirements.</li>
<li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work with little-to-no supervision.</li>
<li>Performs all other duties as assigned as requested.</li>
</ul>
<h4>Minimum Requirements</h4>
<ul>
<li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li>
<li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active state issued driver’s license.</li>
<li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred Qualifications</h4>
<ul>
<li>Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an airframe and powerplant mechanic.</li>
<li>RPA deployment experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>Aircraft mechanic experience within the last 10 years.</li>
<li>MQ-9 experience as an aircraft mechanic.</li>
<li>MQ-9 aircraft composite repair/replacement experience.</li>
</ul></p><p></p>
Amentum
Jordan - Amman
<p><h4>Job Description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p>
<p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p>
<p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p>
<p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p>
<p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p>
<p>USAF equivalent position is Aircraft Mechanic Apprentice.</p>
<h4>Essential Responsibilities:</h4>
<ul>
<li>Performs all daily launch/recovery duties in support of operational requirements.</li>
<li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work with little-to-no supervision.</li>
<li>Performs all other duties as assigned as requested.</li>
</ul>
<h4>Minimum Requirements</h4>
<ul>
<li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li>
<li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active state issued driver’s license.</li>
<li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred Qualifications</h4>
<ul>
<li>Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an airframe and powerplant mechanic.</li>
<li>RPA deployment experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>Aircraft mechanic experience within the last 10 years.</li>
<li>MQ-9 experience as an aircraft mechanic.</li>
<li>MQ-9 aircraft composite repair/replacement experience.</li>
</ul></p><p></p>
Amentum
Jordan - Amman
<p><h4>Job description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p>
<p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p>
<p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p>
<p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, A&P flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p>
<p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p>
<p>USAF equivalent position is Aircraft Mechanic Apprentice.</p>
<h4>Essential responsibilities:</h4>
<ul>
<li>Performs all daily launch/recovery duties in support of operational requirements.</li>
<li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneuhydraulic, fuel, electrical/electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work with little-to-no supervision.</li>
<li>Performs all other duties as assigned or requested.</li>
</ul>
<h4>Minimum requirements:</h4>
<ul>
<li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li>
<li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must submit updated SF-86 within 30 days of hire start date.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active state issued driver’s license.</li>
<li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred qualifications:</h4>
<ul>
<li>Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an airframe and powerplant mechanic.</li>
<li>RPA deployment experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>Aircraft mechanic experience within the last 10 years.</li>
<li>MQ-9 experience as an aircraft mechanic.</li>
<li>MQ-9 aircraft composite repair/replacement experience.</li>
</ul></p><p></p>
Amentum
Jordan - Amman
<p><h4>Job description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p>
<p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p>
<p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p>
<p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, A&P flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p>
<p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p>
<p>USAF equivalent position is Aircraft Mechanic Apprentice.</p>
<h4>Essential responsibilities:</h4>
<ul>
<li>Performs all daily launch/recovery duties in support of operational requirements.</li>
<li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneuhydraulic, fuel, electrical/electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work with little-to-no supervision.</li>
<li>Performs all other duties as assigned or requested.</li>
</ul>
<h4>Minimum requirements:</h4>
<ul>
<li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li>
<li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must submit updated SF-86 within 30 days of hire start date.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active state issued driver’s license.</li>
<li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred qualifications:</h4>
<ul>
<li>Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an airframe and powerplant mechanic.</li>
<li>RPA deployment experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>Aircraft mechanic experience within the last 10 years.</li>
<li>MQ-9 experience as an aircraft mechanic.</li>
<li>MQ-9 aircraft composite repair/replacement experience.</li>
</ul></p><p></p>
Amentum
Jordan - Amman
<p><h4>Job description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p>
<p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p>
<p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p>
<p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p>
<p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p>
<p>USAF equivalent position is Aircraft Mechanic Apprentice.</p>
<h4>Essential responsibilities:</h4>
<ul>
<li>Performs all daily launch/recovery duties in support of operational requirements.</li>
<li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic, fuel, electrical/electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work with little-to-no supervision.</li>
<li>Performs all other duties as assigned as requested.</li>
</ul>
<h4>Minimum requirements:</h4>
<ul>
<li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li>
<li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must submit updated SF-86 within 30 days of hire start date.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active state issued driver’s license.</li>
<li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred qualifications:</h4>
<ul>
<li>Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li>
<li>RPA deployment experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>Aircraft mechanic experience within the last 10 years.</li>
<li>MQ-9 experience as an aircraft mechanic.</li>
<li>MQ-9 aircraft composite repair/replacement experience.</li>
</ul></p><p></p>
Amentum
Jordan - Amman
<p><h4>Job description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p>
<p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p>
<p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p>
<p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p>
<p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p>
<p>USAF equivalent position is Aircraft Mechanic Apprentice.</p>
<h4>Essential responsibilities:</h4>
<ul>
<li>Performs all daily launch/recovery duties in support of operational requirements.</li>
<li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic, fuel, electrical/electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work with little-to-no supervision.</li>
<li>Performs all other duties as assigned as requested.</li>
</ul>
<h4>Minimum requirements:</h4>
<ul>
<li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li>
<li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must submit updated SF-86 within 30 days of hire start date.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active state issued driver’s license.</li>
<li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred qualifications:</h4>
<ul>
<li>Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li>
<li>RPA deployment experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>Aircraft mechanic experience within the last 10 years.</li>
<li>MQ-9 experience as an aircraft mechanic.</li>
<li>MQ-9 aircraft composite repair/replacement experience.</li>
</ul></p><p></p>
Amentum
Jordan - Amman
<p><h4>Job Description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p>
<p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions, or similar documents through the usage of test equipment/instruments to affect repairs.</p>
<p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p>
<p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p>
<p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p>
<p>USAF equivalent position is Aircraft Mechanic Journeyman.</p>
<h4>Essential Responsibilities:</h4>
<ul>
<li>Performs all daily launch/recovery duties in support of operational requirements.</li>
<li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work without supervision.</li>
<li>Provides technical and directional leadership guidance to lower-level aircraft mechanics.</li>
<li>Provides training to lower-level aircraft mechanics.</li>
<li>Performs all other duties as assigned or requested.</li>
</ul>
<h4>Minimum Requirements:</h4>
<ul>
<li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of three years of actual aircraft mechanic maintenance experience required.</li>
<li>Minimum of one year experience on MQ-9 aircraft, as an aircraft mechanic.</li>
<li>Must have comprehensive knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess comprehensive knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a comprehensive understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to lift, carry, and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must submit updated SF-86 within 30 days of hire start date.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active state issued driver’s license.</li>
<li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred Qualifications:</h4>
<ul>
<li>Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li>
<li>Aircraft mechanic experience within the last 10 years.</li>
<li>RPA deployment experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>MQ-9 aircraft composite repair/replacement experience.</li>
</ul></p><p></p>
Amentum
Jordan - Amman
<p><h4>Job Description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p>
<p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions, or similar documents through the usage of test equipment/instruments to affect repairs.</p>
<p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p>
<p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p>
<p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p>
<p>USAF equivalent position is Aircraft Mechanic Journeyman.</p>
<h4>Essential Responsibilities:</h4>
<ul>
<li>Performs all daily launch/recovery duties in support of operational requirements.</li>
<li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work without supervision.</li>
<li>Provides technical and directional leadership guidance to lower-level aircraft mechanics.</li>
<li>Provides training to lower-level aircraft mechanics.</li>
<li>Performs all other duties as assigned or requested.</li>
</ul>
<h4>Minimum Requirements:</h4>
<ul>
<li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of three years of actual aircraft mechanic maintenance experience required.</li>
<li>Minimum of one year experience on MQ-9 aircraft, as an aircraft mechanic.</li>
<li>Must have comprehensive knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess comprehensive knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a comprehensive understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to lift, carry, and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must submit updated SF-86 within 30 days of hire start date.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active state issued driver’s license.</li>
<li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred Qualifications:</h4>
<ul>
<li>Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li>
<li>Aircraft mechanic experience within the last 10 years.</li>
<li>RPA deployment experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>MQ-9 aircraft composite repair/replacement experience.</li>
</ul></p><p></p>
Amman Rotana
Jordan - Amman
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>We are currently seeking for passionate and dynamic Maintenance professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.<br><br>As an A/C Technician you are responsible to install, service and repair temperature and air quality control systems and your role will include key responsibilities such as:<br><br>• Repair, maintain and provide technical attention to all electrical and mechanical refrigeration systems of the hotel - freezer, fridges, ice makers, fan coil units, chiller, etc.<br>• Maintain preventively all air-conditioning and refrigeration systems within the hotel<br>• Check on performance of refrigeration systems and components<br>• Verify all door closing systems on walk in coolers / freezer (door gaskets / latches)<br>• Check and maintain all defrosting systems and automation of ice makers<br>• Work on maintenance requests from all departments<br>• Ensure routine cleaning of fan coil units and air-handling unit filters<br>• Check on performance of air-conditioning and chill water systems<br>• Cooperate with all engineering colleagues in detention of failures of air-condition and refrigeration system and function set up<br>• Strict control on venting of CFC’s to atmosphere<br>• Overhauling of air-condition / refrigeration equipment and systems<br>• Check all refrigeration and oil levels and control of major repairs<br>• Cooperate and inform Engineering Storekeeper on purchase of parts<br>• Carry out all works as per the country technical regulations and safety standards</p> </div>
Jordan - Amman
<p>POSITION SUMMARY Perform minor routine maintenance on property vehicles (i.e., engineering trucks, shuttle vans, electric carts) including checking oil, fluid levels, tire pressure/wear, charging batteries, and replacing spark plugs. Perform preventative maintenance on tools and equipment, including cleaning and lubrication. Maintain proper maintenance inventory and requisition parts and supplies as needed. Maintain daily logs of operation, maintenance, and safety activities, including test results, instrument readings, and details of equipment malfunctions and maintenance work. Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Speak with others using clear and professional language, prepare and review written documents accurately and completely, and answer telephones using appropriate etiquette. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Visually inspect tools, equipment, or machines (e.g., to identify defects). Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: Technical, Trade, or Vocational School Degree. Related Work Experience: At least 2 years of related work experience. Supervisory Experience: No supervisory experience. License or Certification: None</p>
Amentum
Jordan - Amman
<p><h4>Job description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p>
<p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p>
<p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p>
<p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engine in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p>
<p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p>
<p>USAF equivalent position is Aircraft Mechanic Journeyman.</p>
<h4>Essential responsibilities:</h4>
<ul>
<li>Performs all daily launch/recovery duties in support of operational requirements.</li>
<li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic/hydraulic, fuel, electrical/electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work without supervision.</li>
<li>Provides technical and directional leadership guidance to lower-level aircraft mechanics.</li>
<li>Provides training to lower-level aircraft mechanics.</li>
<li>Performs all other duties as assigned or requested.</li>
</ul>
<h4>Minimum requirements:</h4>
<ul>
<li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of three years of actual aircraft mechanic maintenance experience required.</li>
<li>Minimum of one year experience on MQ-9 aircraft, as an aircraft mechanic.</li>
<li>Must have comprehensive knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess comprehensive knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a comprehensive understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must submit updated SF-86 within 30 days of hire start date.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active state issued driver’s license.</li>
<li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred qualifications:</h4>
<ul>
<li>Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an airframe and powerplant mechanic.</li>
<li>Aircraft mechanic experience within the last 10 years.</li>
<li>RPA deployment experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>MQ-9 aircraft composite repair/replacement experience.</li>
</ul>
<h4>Compensation details:</h4>
<p>$36.26 per hour</p>
<p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p>
<h4>Benefits overview:</h4>
<p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p>
<ul>
<li>Health, dental, and vision insurance</li>
<li>Paid time off and holidays</li>
<li>Retirement benefits (including 401(k) matching)</li>
<li>Educational reimbursement</li>
<li>Parental leave</li>
<li>Employee stock purchase plan</li>
<li>Tax-saving options</li>
<li>Disability and life insurance</li>
<li>Pet insurance</li>
</ul>
<p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p>
<h4>Additional information</h4>
<p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>
Amentum
Jordan - Amman
<p><h4>Job description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p>
<p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p>
<p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p>
<p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engine in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p>
<p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p>
<p>USAF equivalent position is Aircraft Mechanic Journeyman.</p>
<h4>Essential responsibilities:</h4>
<ul>
<li>Performs all daily launch/recovery duties in support of operational requirements.</li>
<li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic/hydraulic, fuel, electrical/electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work without supervision.</li>
<li>Provides technical and directional leadership guidance to lower-level aircraft mechanics.</li>
<li>Provides training to lower-level aircraft mechanics.</li>
<li>Performs all other duties as assigned or requested.</li>
</ul>
<h4>Minimum requirements:</h4>
<ul>
<li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of three years of actual aircraft mechanic maintenance experience required.</li>
<li>Minimum of one year experience on MQ-9 aircraft, as an aircraft mechanic.</li>
<li>Must have comprehensive knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess comprehensive knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a comprehensive understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must submit updated SF-86 within 30 days of hire start date.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active state issued driver’s license.</li>
<li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred qualifications:</h4>
<ul>
<li>Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an airframe and powerplant mechanic.</li>
<li>Aircraft mechanic experience within the last 10 years.</li>
<li>RPA deployment experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>MQ-9 aircraft composite repair/replacement experience.</li>
</ul>
<h4>Compensation details:</h4>
<p>$36.26 per hour</p>
<p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p>
<h4>Benefits overview:</h4>
<p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p>
<ul>
<li>Health, dental, and vision insurance</li>
<li>Paid time off and holidays</li>
<li>Retirement benefits (including 401(k) matching)</li>
<li>Educational reimbursement</li>
<li>Parental leave</li>
<li>Employee stock purchase plan</li>
<li>Tax-saving options</li>
<li>Disability and life insurance</li>
<li>Pet insurance</li>
</ul>
<p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p>
<h4>Additional information</h4>
<p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>
Amentum
Jordan - Amman
<p><h4>Job description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p>
<p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p>
<p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p>
<p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p>
<p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p>
<p>USAF equivalent position is Aircraft Mechanic Apprentice.</p>
<h4>Essential responsibilities:</h4>
<ul>
<li>Performs all daily launch/recovery duties in support of operational requirements.</li>
<li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work with little-to-no supervision.</li>
<li>Performs all other duties as assigned as requested.</li>
</ul>
<h4>Minimum requirements:</h4>
<ul>
<li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li>
<li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must submit updated SF-86 within 30 days of hire start date.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active state issued driver’s license.</li>
<li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred qualifications:</h4>
<ul>
<li>Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an airframe and powerplant mechanic.</li>
<li>RPA deployment experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>Aircraft mechanic experience within the last 10 years.</li>
<li>MQ-9 experience as an aircraft mechanic.</li>
<li>MQ-9 aircraft composite repair/replacement experience.</li>
</ul>
<h4>Compensation details:</h4>
<p>$34.17 per hour</p>
<p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p>
<h4>Benefits overview:</h4>
<p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p>
<ul>
<li>Health, dental, and vision insurance</li>
<li>Paid time off and holidays</li>
<li>Retirement benefits (including 401(k) matching)</li>
<li>Educational reimbursement</li>
<li>Parental leave</li>
<li>Employee stock purchase plan</li>
<li>Tax-saving options</li>
<li>Disability and life insurance</li>
<li>Pet insurance</li>
</ul>
<p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p>
<h4>Additional information</h4>
<p>Original posting date: 05/06/2026 - Until filled</p>
<p>The job requisition is expected to remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p>
<p>The company is proud to be an equal opportunity employer. Hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>
Amentum
Jordan - Amman
<p><h4>Job description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p>
<p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p>
<p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p>
<p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p>
<p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p>
<p>USAF equivalent position is Aircraft Mechanic Journeyman.</p>
<h4>Essential responsibilities:</h4>
<ul>
<li>Performs all daily launch/recovery duties in support of operational requirements.</li>
<li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash /cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work without supervision.</li>
<li>Provides technical and directional leadership guidance to lower-level Aircraft Mechanics.</li>
<li>Provides training to lower-level Aircraft Mechanics.</li>
<li>Performs all other duties as assigned as requested.</li>
</ul>
<h4>Minimum requirements:</h4>
<ul>
<li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of three years of actual aircraft mechanic maintenance experience required.</li>
<li>Minimum of one year experience on MQ-9 aircraft, as an aircraft mechanic.</li>
<li>Must have comprehensive knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess comprehensive knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a comprehensive understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must submit updated SF-86 within 30 days of hire start date.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active state issued driver’s license.</li>
<li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred qualifications:</h4>
<ul>
<li>Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li>
<li>Aircraft mechanic experience within the last 10 years.</li>
<li>RPA deployment experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>MQ-9 aircraft composite repair / replacement experience.</li>
</ul>
<h4>Compensation details:</h4>
<p>36.26</p>
<p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p>
<h4>Benefits overview:</h4>
<p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p>
<ul>
<li>Health, dental, and vision insurance</li>
<li>Paid time off and holidays</li>
<li>Retirement benefits (including 401(k) matching)</li>
<li>Educational reimbursement</li>
<li>Parental leave</li>
<li>Employee stock purchase plan</li>
<li>Tax-saving options</li>
<li>Disability and life insurance</li>
<li>Pet insurance</li>
</ul>
<p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p>
<h4>Additional information</h4>
<p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>