Electrical Drafts Man Jobs - Amman Jordan

<p><h4>Job description</h4> <p><strong>Job role - Principal Engineer – Electrical – Metro Stations</strong><br> Verbal and written communication in English is mandatory.</p> <h4>Responsibilities:</h4> <ul> <li>Lead multi-disciplinary station electrical design: LV/MV building distribution, protection/coordination, earthing & bonding, lightning protection, standby generators & UPS, lighting & controls, across underground, at-grade, and elevated stations.</li> <li>Own the full design lifecycle: requirements capture, basis-of-design, load studies, selectivity/arc-flash reviews, single-lines, schematics, cable schedules, layouts, specs/BOQs, and employer’s requirements. Provide construction support as needed.</li> <li>Apply rail-specific life-safety standards in stations: e.g., NFPA 130 for fixed guideway transit (egress, fire protection, emergency ventilation & control/communications); coordinate with fire/life-safety, ventilation and architectural teams.</li> <li>Design compliant emergency lighting to EN 1838/BS 5266 (escape route, open-area, high-risk task) and produce photometric calculations & layouts (Dialux/Relux).</li> <li>Engineer EMC & earthing interfaces to EN 50121 (railway EMC) and EN 50122-1 (earthing/bonding for fixed installations) and manage interfaces with signaling/telecom/PSD.</li> <li>Coordinate digitally in BIM (Revit/Navisworks) with architecture, structural and MEP; run design reviews, clash prevention and interface matrices.</li> <li>Lead authority approvals (Saudi & UAE Civil Defence and utilities), support client/stakeholder workshops, value engineering and risk registers.</li> <li>Mentor and manage a team of designers; review deliverables, uphold QA/QC; contribute to proposal writing and level-of-effort estimates.</li> </ul> <h4>Qualifications:</h4> <ul> <li>Bachelor’s or Master’s degree in Electrical Engineering.</li> <li>Professional registration (e.g., CEng/PE) strongly preferred.</li> <li>12–18+ years in building/station electrical design with major rail/metro station projects; GCC experience strongly preferred.</li> <li>Strong grasp of NFPA 130, EN 1838/BS 5266 (emergency lighting), EN 50121/EN 50122 (EMC/earthing), BS 7671/IET Wiring Regs or NEC, and typical rail authority requirements.</li> <li>Fluency with ETAP/Amtech, Dialux/Relux, AutoCAD/Revit, and BIM coordination; familiarity with SCADA/BMS interfaces for station systems.</li> <li>Excellent interface management, stakeholder communication and team leadership skills.</li> </ul> <h4>Nice to have:</h4> <ul> <li>Experience integrating station electrical design with PSD, tunnel ventilation controls, SCS/OCS interfaces, and evacuation strategies per NFPA 130.</li> <li>Past authority liaison in KSA (RCRC/SDAIA utilities/Civil Defense).</li> <li>RAMS exposure (EN 50126/8/9) and cyber/physical security considerations for stations.</li> </ul> <p>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<p><h4>Job role - Principal Electrical Design Engineer – Mission Critical (Data Centres)</h4> <p>Verbal and written communication in English is mandatory.</p> <p><strong>Strong experience</strong></p> <ul> <li>12+ years in data center/mission critical projects</li> <li>Hyperscale/colocation data center experience</li> <li>UAE/KSA (GCC) project exposure</li> <li>Client-facing leadership and business development experience</li> <li>Experience leading multidisciplinary engineering teams in a consulting environment</li> </ul> <p><strong>Responsibilities</strong></p> <ul> <li>Lead the design, integration, and delivery of electrical and MEP systems for mission-critical data centre projects.</li> <li>Provide technical governance by reviewing and approving engineering deliverables aligned with global standards and client requirements.</li> <li>Drive development of modular, cloud, colocation, and hyperscale data centre solutions.</li> <li>Act as the primary client interface, building trusted advisory relationships across key accounts in the region.</li> <li>Lead technical workshops, design reviews, and senior stakeholder presentations.</li> <li>Own project strategy, ensuring delivery excellence across lifecycle stages from concept to execution.</li> <li>Drive business development including bid leadership, proposal strategy, and commercial positioning.</li> <li>Identify and capitalize on opportunities in digital infrastructure, hyperscale, and cloud ecosystems.</li> <li>Collaborate with regional leadership to expand the mission-critical/data centre service offering.</li> <li>Lead, mentor, and develop multidisciplinary engineering teams across electrical, mechanical, civil, and architecture.</li> <li>Oversee resource planning, utilization, and capability development within the data centre practice.</li> <li>Ensure all solutions meet benchmarks for resilience, sustainability, scalability, and operational efficiency.</li> </ul> <p><strong>Qualifications</strong></p> <ul> <li>Bachelor’s degree in Electrical Engineering or a related field; Master’s preferred.</li> <li>12+ years of experience in mission-critical/data centre design, delivery, or advisory.</li> <li>Strong understanding of Tier standards, NFPA, ASHRAE, Uptime Institute guidelines.</li> <li>Proven experience in GCC markets (UAE and/or KSA).</li> <li>Experience working with large consultancies or international engineering firms.</li> <li>Excellent leadership, communication, and client-facing abilities.</li> </ul></p><p></p>

<p><h4>Job purpose</h4> <p>To support the design, installation, operation, and improvement of electrical systems by providing technical assistance, resolving day-to-day engineering issues, and coordinating with relevant teams to ensure safe and reliable performance in line with project and operational requirements.</p> <h4>Key accountability areas</h4> <strong>Electrical engineering activities</strong><br> <li>Prepare and review electrical drawings and technical submittals in accordance with project specifications and standards.</li> <li>Provide technical support during installation, testing, and commissioning activities.</li> <li>Troubleshoot electrical faults and coordinate with maintenance or project teams for resolution.</li> <li>Implement approved design and engineering changes.</li> <strong>Technical coordination and documentation</strong><br> <li>Prepare technical reports, calculations, and engineering documentation as required.</li> <li>Provide technical clarifications to internal teams, contractors, and suppliers.</li> <li>Support material submittal reviews and technical evaluations.</li> <li>Maintain updated engineering records and as-built drawings.</li> <strong>Quality and compliance</strong><br> <li>Ensure electrical activities are performed in line with applicable standards and approved procedures.</li> <li>Coordinate with the quality team to address non-conformities and implement corrective actions.</li> <li>Witness testing activities and verify proper documentation of results.</li> <strong>HSE and operational support</strong><br> <li>Follow HSE policies and promote safe working practices during all electrical activities.</li> <li>Identify and report potential risks and support corrective actions.</li> <li>Coordinate with concerned functions to ensure smooth execution of work.</li> <h4>Role accountability</h4> <strong>HR proficiency</strong><br> <p>Ability to obtain updated soft and technical skills related to the job.</p> <strong>Delivery</strong><br> <li>Perform the planned activities to meet the operational and development targets as per delivery schedules.</li> <li>Utilize resources effectively to achieve objectives within efficient cost and time.</li> <li>Provide a periodic report formatted by detailing the deviation and execution of planned tasks.</li> <strong>Problem-solving</strong><br> <p>Solve any related problems that arise and escalate any complex operational issues.</p> <strong>Quality</strong><br> <p>Ensure quality requirements to develop effective quality control and processes including specifications for products, processes, or related activities.</p> <strong>Business process improvements</strong><br> <p>Coordinate well-defined written systems, policies, procedures, and seek automation opportunities as much as possible.</p> <strong>Compliance</strong><br> <p>Comply with related policies, procedures, and work instructions.</p> <strong>Health, safety, and environment</strong><br> <p>Ensure compliance with relevant safety, quality, and environmental management procedures and controls within defined area of work activity to guarantee safety, legislative compliance, and delivery of high-quality products and services.</p> <h4>Academic qualification</h4> <p>Bachelor degree in Electrical Engineering</p> <h4>Work experience</h4> <p>2 to 4 years</p> <h4>Technical / functional competencies</h4> <p>Safety<br> Design<br> Design tools<br> Engineering design<br> Design specifications</p></p><p></p>

<p><h4>Job description</h4> <p><strong>Job role - Principal Engineer – Electrical – Metro Stations</strong><br> Verbal and written communication in English is mandatory.</p> <h4>Responsibilities:</h4> <ul> <li>Lead multi-disciplinary station electrical design: LV/MV building distribution, protection/coordination, earthing & bonding, lightning protection, standby generators & UPS, lighting & controls, across underground, at-grade, and elevated stations.</li> <li>Own the full design lifecycle: requirements capture, basis-of-design, load studies, selectivity/arc-flash reviews, single-lines, schematics, cable schedules, layouts, specs/BOQs, and employer’s requirements. Provide construction support as needed.</li> <li>Apply rail-specific life-safety standards in stations: e.g., NFPA 130 for fixed guideway transit (egress, fire protection, emergency ventilation & control/communications); coordinate with fire/life-safety, ventilation and architectural teams.</li> <li>Design compliant emergency lighting to EN 1838/BS 5266 (escape route, open-area, high-risk task) and produce photometric calculations & layouts (Dialux/Relux).</li> <li>Engineer EMC & earthing interfaces to EN 50121 (railway EMC) and EN 50122-1 (earthing/bonding for fixed installations) and manage interfaces with signaling/telecom/PSD.</li> <li>Coordinate digitally in BIM (Revit/Navisworks) with architecture, structural and MEP; run design reviews, clash prevention and interface matrices.</li> <li>Lead authority approvals (Saudi & UAE Civil Defence and utilities), support client/stakeholder workshops, value engineering and risk registers.</li> <li>Mentor and manage a team of designers; review deliverables, uphold QA/QC; contribute to proposal writing and level-of-effort estimates.</li> </ul> <h4>Qualifications:</h4> <ul> <li>Bachelor’s or Master’s degree in Electrical Engineering.</li> <li>Professional registration (e.g., CEng/PE) strongly preferred.</li> <li>12–18+ years in building/station electrical design with major rail/metro station projects; GCC experience strongly preferred.</li> <li>Strong grasp of NFPA 130, EN 1838/BS 5266 (emergency lighting), EN 50121/EN 50122 (EMC/earthing), BS 7671/IET Wiring Regs or NEC, and typical rail authority requirements.</li> <li>Fluency with ETAP/Amtech, Dialux/Relux, AutoCAD/Revit, and BIM coordination; familiarity with SCADA/BMS interfaces for station systems.</li> <li>Excellent interface management, stakeholder communication and team leadership skills.</li> </ul> <h4>Nice to have:</h4> <ul> <li>Experience integrating station electrical design with PSD, tunnel ventilation controls, SCS/OCS interfaces, and evacuation strategies per NFPA 130.</li> <li>Past authority liaison in KSA (RCRC/SDAIA utilities/Civil Defense).</li> <li>RAMS exposure (EN 50126/8/9) and cyber/physical security considerations for stations.</li> </ul> <p>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<p><h4>Description</h4> <p>Please submit your CV in English and indicate your level of English proficiency.</p> <p>Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems. Participation is project-based, not permanent employment.</p> <h4>What this opportunity involves</h4> <p>While each project involves unique tasks, contributors may:</p> <ul> <li>Design original computational engineering problems that simulate real engineering workflows;</li> <li>Create problems requiring Python programming to solve engineering calculations and simulations;</li> <li>Ensure problems are computationally intensive and require numerical methods or iterative solutions;</li> <li>Develop problems involving system design, optimization, and analysis;</li> <li>Base problems on real research challenges or practical applications from engineering practice;</li> <li>Verify solutions using Python with standard engineering libraries;</li> <li>Document problem statements clearly and provide verified correct answers.</li> </ul> <h4>What we look for</h4> <p>This opportunity is a good fit for engineers with experience in Python open to part-time, non-permanent projects. Ideally, contributors will have:</p> <ul> <li>Degree in Electrical Engineering or related fields;</li> <li>Python proficiency for numerical validation. MATLAB, R, C, SQL, Numpy, Pandas, SciPy, domain-specific libraries, Stata or knowledge of any programming language can be equivalent;</li> <li>2+ years of professional experience: applied, research, or teaching experience is applicable;</li> <li>Understanding of practical engineering constraints and approximations;</li> <li>Strong written English (C1+);</li> <li>Professional certifications (e.g., CMME, SAS Certifications, CAP) and experience in international or applied projects are an advantage.</li> </ul> <h4>How it works</h4> <p>Apply ? Pass qualification(s) ? Join a project ? Complete tasks ? Get paid</p> <h4>Project time expectations</h4> <p>For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements. This is an estimate, not a guaranteed workload, and applies only while the project is active.</p> <h4>Compensation</h4> <p>On this project, contributors can earn up to $37 per hour equivalent, depending on their level and pace of contribution.</p> <p>Compensation varies across projects depending on scope, complexity, and required expertise. Please note that other projects on the platform may offer different earning levels based on their requirements.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Org. Setting and Reporting UNRWA is a United Nations agency established by the General Assembly in 1949 and is mandated to provide assistance and protection to a population of some 5.8 million registered Palestine refugees. Its mission is to help Palestine refugees in Jordan, Lebanon, Syria, West Bank and the Gaza Strip to achieve their full potential in human development, pending a just solution to their plight. UNRWA's services encompass education, health care, relief and social services, camp infrastructure and improvement, microfinance, and emergency assistance. UNRWA is the largest UN operation in the Middle East with more than 30,000 staff. UNRWA is funded almost entirely by voluntary contributions. If you are looking for a rewarding opportunity to make a tangible difference for one of the most vulnerable communities in the world, UNRWA would like to hear from you. The incumbent reports to the Electrical Design Engineer (A14).</p><p>Responsibilities - Assists in preparing detailed electrical designs through CAD software for building projects such as schools, hospitals, clinics, shelters, warehouses, and rehousing initiatives including renewable, energy, PV and infrastructure projects, ensuring compliance with Agency policies, design criteria, standards, and both local and international codes of practice, and incorporating green elements and safety needs to achieve the most cost effective and reliable solution. - Contributes to the tender documents preparation related to electrical works, including drafting specifications for non-standard items, and preparing relevant descriptions for inclusion in Bills of Quantities (BoQs) and cost estimate. - Provides technical support for electrical alteration works in Agency premises, including preparing assessment technical reports on the existing electrical systems, inspections, and remediation requirements. - Cooperates with construction teams to address electrical design issues during implementation; supports updates of electrical drawings to reflect as-built conditions and evolving site requirements. - Coordinates with other designers to optimise electrical solutions, ensuring safety, integrity, and protection in the overall designs; may suggest improvements where is applicable. - Assists in drafting Terms of Reference (ToR) for consultants for electrical works and supports their monitoring and supervision to ensure adherence thereof and meeting the design criteria and standards. - Provides inputs for electrical technical reports, design reports, progress weekly, monthly, and ad-hoc reports. - Performs other duties as may be assigned by the supervisor.</p><p>Competencies UN Core Values of Integrity, Professionalism and Respect for Diversity, and Core Competencies of Communication, Working with People and Drive for Results apply by default. Creating and Innovating Applying Technical Expertise Relating and Networking Learning and Researching</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Education</h2><p>A university degree in electrical engineering from an accredited university/institution.</p><h2>Job - Specific Qualification</h2><p>Not available.</p><h2>Work Experience</h2><p>At least three years of relevant experience in the electrical design resources, which specified for drawing and calculations, preferably in public buildings and developmental projects is required</p><p>Experience with electrical design software and computer-aided design, such as AutoCAD and other software is required.</p><h2>Languages</h2><p>English and Arabic are required.</p><p></p></section>

<p><h4>Responsibilities:</h4> <p><strong>Lead electrical design</strong> from feasibility and basis of design (BoD) through detailed design, tender, and construction support for aviation facilities.</p> <p><strong>Own the electrical power strategy</strong> for large-scale facilities (e.g., hangar bays): MV/LV distribution, redundancy, load management, earthing, and control philosophies—balancing reliability, safety, and energy performance (IEC/NFPA context).</p> <p><strong>Engineer electrical systems</strong> for hazardous operations: paint booths/rooms, fuel-cell maintenance areas, welding zones—ensuring compliance with ATEX/IECEx and coordination with mechanical ventilation and controls.</p> <p><strong>Design and specify power systems</strong> for aviation facilities: transformers, generators, UPS, distribution boards, and backup systems for mission-critical operations.</p> <p><strong>Integrate electrical utilities</strong> across MRO and workshop environments—ground power units (GPU), PCA interfaces, process equipment loads, and coordination with mechanical, fire/life safety, and control systems.</p> <p><strong>Shape electrical systems</strong> for catering facilities: resilient power distribution for kitchens, cold-chain systems, and hygienic areas aligned with HACCP/ISO 22000 requirements.</p> <p><strong>Deliver BIM-led coordination</strong> (Revit/Navisworks) across architecture, structures, MEP, and specialist systems; lead clash resolution and model QA.</p> <p><strong>Perform calculations and studies:</strong> load estimation, cable sizing, protection coordination, short-circuit analysis, and lighting design.</p> <p><strong>Author technical documents:</strong> BoD, load schedules, single-line diagrams (SLDs), specifications, and commissioning plans.</p> <p><strong>Mentor and review engineers/designers;</strong> lead design reviews, HAZOPs, and constructability/operability workshops.</p> <p><strong>Engage stakeholders</strong>—airlines, MROs, airport operators, and authorities—to secure approvals and ensure smooth delivery.</p> <p><strong>Lead retrofit, refurbishment, and brownfield upgrades</strong> in operational airport environments—assessing existing systems, planning phased upgrades, and integrating new systems with minimal disruption while improving capacity, compliance, and energy performance.</p> <h4>Key systems & domains you’ll cover:</h4> <ul> <li>Hangars & workshops: MV/LV distribution, ground power units (GPU), PCA electrical interfaces, high-bay lighting, emergency power, earthing and bonding for aircraft safety, and hangar door electrics.</li> <li>Paint/corrosion control: hazardous-area electrical systems, explosion-proof equipment, interlocks, LEL monitoring interfaces, and ATEX/IECEx compliance coordinated with ventilation and controls.</li> <li>Welding & fabrication: power distribution for welding equipment, equipment earthing, task lighting, and integration with extraction/LEV systems aligned with OSHA/ACGIH guidance.</li> <li>Power systems: transformers, generators, UPS, LV panels, and distribution networks designed for redundancy, resilience, and mission-critical operations.</li> <li>Catering facilities: resilient power supply for kitchens, cold rooms/freezers, food processing areas, and hygienic zoning aligned with HACCP/ISO 22000 requirements.</li> <li>ELV & controls: fire alarm systems (NFPA 72), ICT, security (CCTV/access control), structured cabling, and BMS/SCADA integration for operational monitoring and control.</li> </ul> <h4>Qualifications:</h4> <ul> <li>Bachelor’s degree in electrical engineering; master’s degree preferred.</li> <li>Professionally registered (CEng, PE, or equivalent).</li> <li>15+ years' experience in electrical building services design, including aviation and complex infrastructure projects.</li> <li>Demonstrated experience leading multidisciplinary design teams and delivering major projects.</li> </ul> <h4>Technical expertise:</h4> <ul> <li>Strong knowledge of international electrical design codes, standards, and aviation requirements.</li> <li>Expertise in MV/LV power distribution, load assessments, protection systems, and earthing design.</li> <li>Proficiency in BIM and industry-standard design software, including Revit, Navisworks, ETAP, and Dialux.</li> <li>Experience in airport facilities, terminal buildings, and aviation-related infrastructure is highly desirable.</li> </ul></p><p></p>

<p><h4>Responsibilities:</h4> <p><strong>Lead electrical design</strong> from feasibility and basis of design (BoD) through detailed design, tender, and construction support for aviation facilities.</p> <p><strong>Own the electrical power strategy</strong> for large-scale facilities (e.g., hangar bays): MV/LV distribution, redundancy, load management, earthing, and control philosophies—balancing reliability, safety, and energy performance (IEC/NFPA context).</p> <p><strong>Engineer electrical systems</strong> for hazardous operations: paint booths/rooms, fuel-cell maintenance areas, welding zones—ensuring compliance with ATEX/IECEx and coordination with mechanical ventilation and controls.</p> <p><strong>Design and specify power systems</strong> for aviation facilities: transformers, generators, UPS, distribution boards, and backup systems for mission-critical operations.</p> <p><strong>Integrate electrical utilities</strong> across MRO and workshop environments—ground power units (GPU), PCA interfaces, process equipment loads, and coordination with mechanical, fire/life safety, and control systems.</p> <p><strong>Shape electrical systems</strong> for catering facilities: resilient power distribution for kitchens, cold-chain systems, and hygienic areas aligned with HACCP/ISO 22000 requirements.</p> <p><strong>Deliver BIM-led coordination</strong> (Revit/Navisworks) across architecture, structures, MEP, and specialist systems; lead clash resolution and model QA.</p> <p><strong>Perform calculations and studies:</strong> load estimation, cable sizing, protection coordination, short-circuit analysis, and lighting design.</p> <p><strong>Author technical documents:</strong> BoD, load schedules, single-line diagrams (SLDs), specifications, and commissioning plans.</p> <p><strong>Mentor and review engineers/designers;</strong> lead design reviews, HAZOPs, and constructability/operability workshops.</p> <p><strong>Engage stakeholders</strong>—airlines, MROs, airport operators, and authorities—to secure approvals and ensure smooth delivery.</p> <p><strong>Lead retrofit, refurbishment, and brownfield upgrades</strong> in operational airport environments—assessing existing systems, planning phased upgrades, and integrating new systems with minimal disruption while improving capacity, compliance, and energy performance.</p> <h4>Key systems & domains you’ll cover:</h4> <ul> <li>Hangars & workshops: MV/LV distribution, ground power units (GPU), PCA electrical interfaces, high-bay lighting, emergency power, earthing and bonding for aircraft safety, and hangar door electrics.</li> <li>Paint/corrosion control: hazardous-area electrical systems, explosion-proof equipment, interlocks, LEL monitoring interfaces, and ATEX/IECEx compliance coordinated with ventilation and controls.</li> <li>Welding & fabrication: power distribution for welding equipment, equipment earthing, task lighting, and integration with extraction/LEV systems aligned with OSHA/ACGIH guidance.</li> <li>Power systems: transformers, generators, UPS, LV panels, and distribution networks designed for redundancy, resilience, and mission-critical operations.</li> <li>Catering facilities: resilient power supply for kitchens, cold rooms/freezers, food processing areas, and hygienic zoning aligned with HACCP/ISO 22000 requirements.</li> <li>ELV & controls: fire alarm systems (NFPA 72), ICT, security (CCTV/access control), structured cabling, and BMS/SCADA integration for operational monitoring and control.</li> </ul> <h4>Qualifications:</h4> <ul> <li>Bachelor’s degree in electrical engineering; master’s degree preferred.</li> <li>Professionally registered (CEng, PE, or equivalent).</li> <li>15+ years' experience in electrical building services design, including aviation and complex infrastructure projects.</li> <li>Demonstrated experience leading multidisciplinary design teams and delivering major projects.</li> </ul> <h4>Technical expertise:</h4> <ul> <li>Strong knowledge of international electrical design codes, standards, and aviation requirements.</li> <li>Expertise in MV/LV power distribution, load assessments, protection systems, and earthing design.</li> <li>Proficiency in BIM and industry-standard design software, including Revit, Navisworks, ETAP, and Dialux.</li> <li>Experience in airport facilities, terminal buildings, and aviation-related infrastructure is highly desirable.</li> </ul></p><p></p>

<p><h4>Job purpose</h4> <p>To support the design, installation, operation, and improvement of electrical systems by providing technical assistance, resolving day-to-day engineering issues, and coordinating with relevant teams to ensure safe and reliable performance in line with project and operational requirements.</p> <h4>Key accountability areas</h4> <strong>Electrical engineering activities</strong><br> <li>Prepare and review electrical drawings and technical submittals in accordance with project specifications and standards.</li> <li>Provide technical support during installation, testing, and commissioning activities.</li> <li>Troubleshoot electrical faults and coordinate with maintenance or project teams for resolution.</li> <li>Implement approved design and engineering changes.</li> <strong>Technical coordination and documentation</strong><br> <li>Prepare technical reports, calculations, and engineering documentation as required.</li> <li>Provide technical clarifications to internal teams, contractors, and suppliers.</li> <li>Support material submittal reviews and technical evaluations.</li> <li>Maintain updated engineering records and as-built drawings.</li> <strong>Quality and compliance</strong><br> <li>Ensure electrical activities are performed in line with applicable standards and approved procedures.</li> <li>Coordinate with the quality team to address non-conformities and implement corrective actions.</li> <li>Witness testing activities and verify proper documentation of results.</li> <strong>HSE and operational support</strong><br> <li>Follow HSE policies and promote safe working practices during all electrical activities.</li> <li>Identify and report potential risks and support corrective actions.</li> <li>Coordinate with concerned functions to ensure smooth execution of work.</li> <h4>Role accountability</h4> <strong>HR proficiency</strong><br> <p>Ability to obtain updated soft and technical skills related to the job.</p> <strong>Delivery</strong><br> <li>Perform the planned activities to meet the operational and development targets as per delivery schedules.</li> <li>Utilize resources effectively to achieve objectives within efficient cost and time.</li> <li>Provide a periodic report formatted by detailing the deviation and execution of planned tasks.</li> <strong>Problem-solving</strong><br> <p>Solve any related problems that arise and escalate any complex operational issues.</p> <strong>Quality</strong><br> <p>Ensure quality requirements to develop effective quality control and processes including specifications for products, processes, or related activities.</p> <strong>Business process improvements</strong><br> <p>Coordinate well-defined written systems, policies, procedures, and seek automation opportunities as much as possible.</p> <strong>Compliance</strong><br> <p>Comply with related policies, procedures, and work instructions.</p> <strong>Health, safety, and environment</strong><br> <p>Ensure compliance with relevant safety, quality, and environmental management procedures and controls within defined area of work activity to guarantee safety, legislative compliance, and delivery of high-quality products and services.</p> <h4>Academic qualification</h4> <p>Bachelor degree in Electrical Engineering</p> <h4>Work experience</h4> <p>2 to 4 years</p> <h4>Technical / functional competencies</h4> <p>Safety<br> Design<br> Design tools<br> Engineering design<br> Design specifications</p></p><p></p>

<p><h4>Job role - principal electrical design engineer – mission critical (data centres)</h4> <p>Verbal and written communication in English is mandatory.</p> <p><strong>Strong experience</strong></p> <ul> <li>Uptime Tier III/IV data center design experience</li> <li>MV/LV, UPS & generator design expertise</li> <li>Data center standards knowledge (Uptime/TIA-942/NFPA)</li> <li>Client-facing leadership and stakeholder management experience</li> </ul> <p><strong>Responsibilities</strong></p> <ul> <li>Translate client requirements into robust electrical designs, including electrical distribution (medium and low voltage), generator, UPS systems, switchgear, busducts, grounding schemes, power monitoring systems, fire detection and alarm system etc.</li> <li>Produce all technical documentation: calculations, system studies, single-line diagrams, layout drawings, specifications, block schematics, and compliance tables.</li> <li>Lead conceptual and detailed design reviews, leveraging advanced analytical tools, BIM/Revit models, and coordination with architectural, mechanical, and building technology disciplines.</li> <li>Mentor and develop junior engineers, share best practices in mission-critical electrical systems, and drive continuous improvement across the design team.</li> <li>Collaborate closely with regional and global teams to grow consulting capabilities and ensure alignment with global design standards.</li> <li>Develop and standardize scalable, repeatable data center solutions to drive consistency and efficiencies across UAE and KSA.</li> <li>Conduct site assessments, capacity planning, and feasibility studies aligned with Uptime Institute Tier requirements.</li> <li>Ensure compliance with international standards (Uptime Institute, TIA-942, NFPA, ASHRAE) and local regulations.</li> <li>Drive business growth by contributing to technical proposals, client presentations, and by identifying opportunities for service enhancements.</li> </ul> <p><strong>Qualifications</strong></p> <ul> <li>Bachelor’s or master’s degree in electrical engineering.</li> <li>10+ years of progressive electrical experience in planning, designing, and delivering large-scale data centers, including multiple Uptime Tier III/IV projects.</li> <li>Demonstrated ability to coordinate with stakeholders in complex, matrixed environments.</li> <li>Professional certifications such as Uptime Tier Certified Professional, PMP, LEED AP, or BICSI RCDD are highly desirable.</li> <li>In-depth knowledge of data centres electrical infrastructure, power distribution topologies, servers, storage, network systems, SCADA systems, power management, ELV, and security.</li> <li>Experienced in data center construction phasing and associated design planning.</li> <li>Strong communication skills for effective client presentations, stakeholder workshops, and cross-functional coordination.</li> <li>Familiarity with local and international codes and standards, including NEC, IEC, ISO 50001, ISO 27001, PDPL, and ESMA.</li> </ul> <p>With over 90 years' combined experience, NES Fircroft is proud to be the world's leading engineering staffing provider spanning the oil & gas, power & renewables, chemicals, construction & infrastructure, life sciences, mining and manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<p><h4>Job role - principal electrical design engineer – mission critical (data centres)</h4> <p>Verbal and written communication in English is mandatory.</p> <p><strong>Strong experience</strong></p> <ul> <li>Uptime Tier III/IV data center design experience</li> <li>MV/LV, UPS & generator design expertise</li> <li>Data center standards knowledge (Uptime/TIA-942/NFPA)</li> <li>Client-facing leadership and stakeholder management experience</li> </ul> <p><strong>Responsibilities</strong></p> <ul> <li>Translate client requirements into robust electrical designs, including electrical distribution (medium and low voltage), generator, UPS systems, switchgear, busducts, grounding schemes, power monitoring systems, fire detection and alarm system etc.</li> <li>Produce all technical documentation: calculations, system studies, single-line diagrams, layout drawings, specifications, block schematics, and compliance tables.</li> <li>Lead conceptual and detailed design reviews, leveraging advanced analytical tools, BIM/Revit models, and coordination with architectural, mechanical, and building technology disciplines.</li> <li>Mentor and develop junior engineers, share best practices in mission-critical electrical systems, and drive continuous improvement across the design team.</li> <li>Collaborate closely with regional and global teams to grow consulting capabilities and ensure alignment with global design standards.</li> <li>Develop and standardize scalable, repeatable data center solutions to drive consistency and efficiencies across UAE and KSA.</li> <li>Conduct site assessments, capacity planning, and feasibility studies aligned with Uptime Institute Tier requirements.</li> <li>Ensure compliance with international standards (Uptime Institute, TIA-942, NFPA, ASHRAE) and local regulations.</li> <li>Drive business growth by contributing to technical proposals, client presentations, and by identifying opportunities for service enhancements.</li> </ul> <p><strong>Qualifications</strong></p> <ul> <li>Bachelor’s or master’s degree in electrical engineering.</li> <li>10+ years of progressive electrical experience in planning, designing, and delivering large-scale data centers, including multiple Uptime Tier III/IV projects.</li> <li>Demonstrated ability to coordinate with stakeholders in complex, matrixed environments.</li> <li>Professional certifications such as Uptime Tier Certified Professional, PMP, LEED AP, or BICSI RCDD are highly desirable.</li> <li>In-depth knowledge of data centres electrical infrastructure, power distribution topologies, servers, storage, network systems, SCADA systems, power management, ELV, and security.</li> <li>Experienced in data center construction phasing and associated design planning.</li> <li>Strong communication skills for effective client presentations, stakeholder workshops, and cross-functional coordination.</li> <li>Familiarity with local and international codes and standards, including NEC, IEC, ISO 50001, ISO 27001, PDPL, and ESMA.</li> </ul> <p>With over 90 years' combined experience, NES Fircroft is proud to be the world's leading engineering staffing provider spanning the oil & gas, power & renewables, chemicals, construction & infrastructure, life sciences, mining and manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<p><h4>Job role - Principal Electrical Design Engineer – Mission Critical (Data Centres)</h4> <p>Verbal and written communication in English is mandatory.</p> <p><strong>Strong experience</strong></p> <ul> <li>12+ years in data center/mission critical projects</li> <li>Hyperscale/colocation data center experience</li> <li>UAE/KSA (GCC) project exposure</li> <li>Client-facing leadership and business development experience</li> <li>Experience leading multidisciplinary engineering teams in a consulting environment</li> </ul> <p><strong>Responsibilities</strong></p> <ul> <li>Lead the design, integration, and delivery of electrical and MEP systems for mission-critical data centre projects.</li> <li>Provide technical governance by reviewing and approving engineering deliverables aligned with global standards and client requirements.</li> <li>Drive development of modular, cloud, colocation, and hyperscale data centre solutions.</li> <li>Act as the primary client interface, building trusted advisory relationships across key accounts in the region.</li> <li>Lead technical workshops, design reviews, and senior stakeholder presentations.</li> <li>Own project strategy, ensuring delivery excellence across lifecycle stages from concept to execution.</li> <li>Drive business development including bid leadership, proposal strategy, and commercial positioning.</li> <li>Identify and capitalize on opportunities in digital infrastructure, hyperscale, and cloud ecosystems.</li> <li>Collaborate with regional leadership to expand the mission-critical/data centre service offering.</li> <li>Lead, mentor, and develop multidisciplinary engineering teams across electrical, mechanical, civil, and architecture.</li> <li>Oversee resource planning, utilization, and capability development within the data centre practice.</li> <li>Ensure all solutions meet benchmarks for resilience, sustainability, scalability, and operational efficiency.</li> </ul> <p><strong>Qualifications</strong></p> <ul> <li>Bachelor’s degree in Electrical Engineering or a related field; Master’s preferred.</li> <li>12+ years of experience in mission-critical/data centre design, delivery, or advisory.</li> <li>Strong understanding of Tier standards, NFPA, ASHRAE, Uptime Institute guidelines.</li> <li>Proven experience in GCC markets (UAE and/or KSA).</li> <li>Experience working with large consultancies or international engineering firms.</li> <li>Excellent leadership, communication, and client-facing abilities.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>Saab, Inc.'s Surveillance U.S. Division is seeking an electrical engineering functional manager to manage the team of electrical engineers and will report to the director of engineering. The individual that fills this role will collaborate with a multi-disciplinary team of functional managers across multiple engineering disciplines, as well as program management counterparts to ensure the execution and delivery of a quality end product within cost and schedule targets. Responsibilities will include:</p> <ul> <li>Lead and develop the electrical engineering team focused on meeting technical, program and business objectives.</li> <li>Program resource planning.</li> <li>Develop ongoing staffing capacity and long-term staffing plans.</li> <li>Recruit staff as necessary to meet business demand.</li> <li>Assign appropriate personnel to projects and programs.</li> <li>Ensure all personnel have established relevant goals and objectives that link directly to the objectives of the business.</li> <li>Provide technical oversight, guidance, mentorship and coaching to assigned personnel in the performance of their assigned tasks.</li> <li>Manage the annual performance review process, compensation reviews, and career development process.</li> <li>Ensure accountability for creation of accurate cost and schedule targets, and execution of technical effort in accordance with those targets.</li> <li>Understand and manage resources to program manager’s budget and schedule.</li> <li>Determine the department or team's strategy for completing a task.</li> <li>Maintain department competencies by creating a training strategy and providing training opportunities for employees to continue their professional development.</li> <li>Responsible for cost estimating activities related to contract proposals, IR&D, capital, and assigned overhead budgets.</li> <li>Ensure the basis of estimates (BOEs) and schedules are accurate, appropriate, documented and consistent with overall program objectives.</li> <li>Establish cost and schedule targets for team members.</li> <li>Monitor and control execution consistent with established technical, cost and schedule objectives.</li> <li>Support contract negotiations and fact finding as requested by program management.</li> <li>Provide credible technical insight and leadership within electrical engineering.</li> <li>Contribute to technology roadmap planning.</li> <li>Develop innovative technical solutions, assess technical risk and identify risk mitigation strategies within assigned discipline(s).</li> <li>Responsible for budgeting including overhead, capital requests, and software/tool subscriptions for the electrical engineering function.</li> <li>Be a champion for the quality and continuous improvement of technical processes.</li> <li>Ensure updates for QMS processes, forms, templates, work instructions and job aids are completed.</li> <li>Establish processes and benchmarks for measuring team and process performance.</li> <li>Ensure team is accountable for adherence to established processes and continuous improvement objectives.</li> </ul> <p><strong>Compensation range:</strong> $150,500 - $195,600</p> <p>The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training.</p> <h4>Skills and experience</h4> <ul> <li>Bachelor's degree in electrical engineering.</li> <li>15+ years of experience (if MA/MS, 12+ years of experience; if PhD, 10+ years of experience).</li> <li>Be a leading subject matter expert in the electrical engineering field.</li> <li>Working knowledge of Altium and SolidWorks.</li> <li>Ability to resolve complex issues in creative and effective ways.</li> <li>Ability to provide strategic direction for projects and programs in area of expertise.</li> <li>Ability to lead through ambiguity, anticipating change, mitigating risk, and making sound high impact decisions.</li> <li>Experience shaping organizational direction through technical leadership, innovation, and continuous improvement initiatives.</li> <li>Excellent written and verbal communication skills to collaborate across disciplines effectively.</li> <li>Willingness to travel up to 10% in support of program and business efforts.</li> <li>Ability to obtain a Secret level clearance.</li> </ul> <h4>Citizenship requirements</h4> <p>Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.</p> <h4>Drug-free workplaces</h4> <p>Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen.</p> <h4>Benefits</h4> <p>Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits.</p> <p>Highlights include:</p> <ul> <li>Medical, vision, and dental insurance for employees and dependents.</li> <li>Generous paid time off, including 8 designated holidays.</li> <li>401(k) with employer contributions.</li> <li>Tuition assistance and student loan assistance.</li> <li>Wellness and employee assistance resources.</li> <li>Employee stock purchase opportunities.</li> <li>Short-term and long-term coverage.</li> </ul> <h4>About us</h4> <p>Saab is a leading defense and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in ten U.S. locations.</p> <p>Saab is a company where employees are valued as an asset and offered unlimited opportunities for advancing in their careers. We are also a company that respects each person’s needs and encourages employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an affirmative action employer for protected veterans and individuals with disabilities. Saab is an equal employment opportunity employer; all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, sex, national origin, age, disability, genetic information, sexual orientation, gender identity, veteran status, or any other federal, state, or locally protected category.</p></p><p></p>

<p><h4>Job description</h4> <p>Saab, Inc.'s Surveillance U.S. Division is seeking an electrical engineering functional manager to manage the team of electrical engineers and will report to the director of engineering. The individual that fills this role will collaborate with a multi-disciplinary team of functional managers across multiple engineering disciplines, as well as program management counterparts to ensure the execution and delivery of a quality end product within cost and schedule targets. Responsibilities will include:</p> <ul> <li>Lead and develop the electrical engineering team focused on meeting technical, program and business objectives.</li> <li>Program resource planning.</li> <li>Develop ongoing staffing capacity and long-term staffing plans.</li> <li>Recruit staff as necessary to meet business demand.</li> <li>Assign appropriate personnel to projects and programs.</li> <li>Ensure all personnel have established relevant goals and objectives that link directly to the objectives of the business.</li> <li>Provide technical oversight, guidance, mentorship and coaching to assigned personnel in the performance of their assigned tasks.</li> <li>Manage the annual performance review process, compensation reviews, and career development process.</li> <li>Ensure accountability for creation of accurate cost and schedule targets, and execution of technical effort in accordance with those targets.</li> <li>Understand and manage resources to program manager’s budget and schedule.</li> <li>Determine the department or team's strategy for completing a task.</li> <li>Maintain department competencies by creating a training strategy and providing training opportunities for employees to continue their professional development.</li> <li>Responsible for cost estimating activities related to contract proposals, IR&D, capital, and assigned overhead budgets.</li> <li>Ensure the basis of estimates (BOEs) and schedules are accurate, appropriate, documented and consistent with overall program objectives.</li> <li>Establish cost and schedule targets for team members.</li> <li>Monitor and control execution consistent with established technical, cost and schedule objectives.</li> <li>Support contract negotiations and fact finding as requested by program management.</li> <li>Provide credible technical insight and leadership within electrical engineering.</li> <li>Contribute to technology roadmap planning.</li> <li>Develop innovative technical solutions, assess technical risk and identify risk mitigation strategies within assigned discipline(s).</li> <li>Responsible for budgeting including overhead, capital requests, and software/tool subscriptions for the electrical engineering function.</li> <li>Be a champion for the quality and continuous improvement of technical processes.</li> <li>Ensure updates for QMS processes, forms, templates, work instructions and job aids are completed.</li> <li>Establish processes and benchmarks for measuring team and process performance.</li> <li>Ensure team is accountable for adherence to established processes and continuous improvement objectives.</li> </ul> <p><strong>Compensation range:</strong> $150,500 - $195,600</p> <p>The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training.</p> <h4>Skills and experience</h4> <ul> <li>Bachelor's degree in electrical engineering.</li> <li>15+ years of experience (if MA/MS, 12+ years of experience; if PhD, 10+ years of experience).</li> <li>Be a leading subject matter expert in the electrical engineering field.</li> <li>Working knowledge of Altium and SolidWorks.</li> <li>Ability to resolve complex issues in creative and effective ways.</li> <li>Ability to provide strategic direction for projects and programs in area of expertise.</li> <li>Ability to lead through ambiguity, anticipating change, mitigating risk, and making sound high impact decisions.</li> <li>Experience shaping organizational direction through technical leadership, innovation, and continuous improvement initiatives.</li> <li>Excellent written and verbal communication skills to collaborate across disciplines effectively.</li> <li>Willingness to travel up to 10% in support of program and business efforts.</li> <li>Ability to obtain a Secret level clearance.</li> </ul> <h4>Citizenship requirements</h4> <p>Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.</p> <h4>Drug-free workplaces</h4> <p>Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen.</p> <h4>Benefits</h4> <p>Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits.</p> <p>Highlights include:</p> <ul> <li>Medical, vision, and dental insurance for employees and dependents.</li> <li>Generous paid time off, including 8 designated holidays.</li> <li>401(k) with employer contributions.</li> <li>Tuition assistance and student loan assistance.</li> <li>Wellness and employee assistance resources.</li> <li>Employee stock purchase opportunities.</li> <li>Short-term and long-term coverage.</li> </ul> <h4>About us</h4> <p>Saab is a leading defense and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in ten U.S. locations.</p> <p>Saab is a company where employees are valued as an asset and offered unlimited opportunities for advancing in their careers. We are also a company that respects each person’s needs and encourages employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an affirmative action employer for protected veterans and individuals with disabilities. Saab is an equal employment opportunity employer; all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, sex, national origin, age, disability, genetic information, sexual orientation, gender identity, veteran status, or any other federal, state, or locally protected category.</p></p><p></p>

<p><h4>Description</h4> <p>Please submit your CV in English and indicate your level of English proficiency.</p> <p>Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems. Participation is project-based, not permanent employment.</p> <h4>What this opportunity involves</h4> <p>While each project involves unique tasks, contributors may:</p> <ul> <li>Design original computational engineering problems that simulate real engineering workflows;</li> <li>Create problems requiring Python programming to solve engineering calculations and simulations;</li> <li>Ensure problems are computationally intensive and require numerical methods or iterative solutions;</li> <li>Develop problems involving system design, optimization, and analysis;</li> <li>Base problems on real research challenges or practical applications from engineering practice;</li> <li>Verify solutions using Python with standard engineering libraries;</li> <li>Document problem statements clearly and provide verified correct answers.</li> </ul> <h4>What we look for</h4> <p>This opportunity is a good fit for engineers with experience in Python open to part-time, non-permanent projects. Ideally, contributors will have:</p> <ul> <li>Degree in Electrical Engineering or related fields;</li> <li>Python proficiency for numerical validation. MATLAB, R, C, SQL, Numpy, Pandas, SciPy, domain-specific libraries, Stata or knowledge of any programming language can be equivalent;</li> <li>2+ years of professional experience: applied, research, or teaching experience is applicable;</li> <li>Understanding of practical engineering constraints and approximations;</li> <li>Strong written English (C1+);</li> <li>Professional certifications (e.g., CMME, SAS Certifications, CAP) and experience in international or applied projects are an advantage.</li> </ul> <h4>How it works</h4> <p>Apply ? Pass qualification(s) ? Join a project ? Complete tasks ? Get paid</p> <h4>Project time expectations</h4> <p>For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements. This is an estimate, not a guaranteed workload, and applies only while the project is active.</p> <h4>Compensation</h4> <p>On this project, contributors can earn up to $37 per hour equivalent, depending on their level and pace of contribution.</p> <p>Compensation varies across projects depending on scope, complexity, and required expertise. Please note that other projects on the platform may offer different earning levels based on their requirements.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><div> <p> <strong>POSITION SUMMARY</strong> </p> <p> </p> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.</p> <p> </p> <p>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.</p> <p> </p> <p>PREFERRED QUALIFICATIONS </p> <p>Education: High school diploma or G.E.D equivalent.</p> <p>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.</p> <p>Experience in hotel engineering or maintenance a plus.</p> <p>Supervisory Experience: No supervisory experience. </p> <p> </p> <p>REQUIRED QUALIFICATIONS</p> <p>License or Certification: Driver s License</p> <p> </p> <p> </p> </div> <div> </div> <p><br></p></div></section>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.</p> <p>Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area.</p> <p>Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.</p> <p>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist</p><p></p>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.</p> <p>Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area.</p> <p>Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.</p> <p>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist</p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education: High school diploma or G.E.D equivalent. Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting. Experience in hotel engineering or maintenance a plus. Supervisory Experience: No supervisory experience. REQUIRED QUALIFICATIONS License or Certification: Driver s License</p><p></p></section>

<p><h4>Company description</h4> <p>Join a hotel that is a member of the Accor network, whose group brings together more than 45 brands, 5,500 hotels, 10,000 restaurants and lifestyle destinations. Here, we believe in you and what you bring to the table. There are many opportunities for development and advancement. Every gesture, every smile, every action, contributes to creating a positive and memorable impact for our customers, our colleagues and also for our planet. Together, we embody the vision of responsible hospitality.</p> <p>Take the opportunity to become a Heartist®, and let your heart guide you in this world where life beats faster.</p> <h4>Job description</h4> <p>Reporting to the assistant director, engineering, responsibilities and essential job functions include but are not limited to the following:</p> <ul> <li>Consistently offers professional, engaging and friendly service.</li> <li>Communicate with engineering management and team leader in regards to possible improvements and increased efficiency.</li> <li>Carry out planned and unplanned maintenance programs for the various systems of accommodation.</li> <li>Coordinate and inform engineering management and team leader of any disruptions to service of any kind.</li> <li>Always utilize safe work practices, efficient methods, proper preventative maintenance and repair to equipment.</li> <li>Cleans and maintains areas of responsibility according to set standards and procedures.</li> <li>Ensure that all the assets of accommodation (housekeeping and engineering) are in proper state and not being misused.</li> <li>Maintain equipment in a proper state of cleanliness and repair.</li> <li>Attend daily briefings with supervisor and take on daily assigned tasks.</li> <li>Report lost and found articles to the housing manager or assistant accommodation manager immediately.</li> <li>Handle colleague complaints, reporting them to supervisor immediately.</li> <li>Record room status in allocated section accurately.</li> <li>Comply with hotel’s health, safety and hygiene policy.</li> <li>Adhere to personnel grooming and hygiene standards.</li> <li>Attend meetings and training sessions as required.</li> <li>Any additional duties assigned.</li> </ul> <h4>Qualifications</h4> <ul> <li>High school graduate, related technical or trades certification.</li> <li>At least 2 years’ experience as a service technician, preferably in the hospitality or hospital industry.</li> <li>Proficient in MV/LV repair and maintenance plus basic knowledge of one other building operations skill set.</li> <li>The ability to use all general repair tools, read shop drawings and specifications, make rough estimates of required materials.</li> <li>The ability to work independently with good interpersonal skills.</li> <li>A creative, practical and pro-active approach to problem solving.</li> <li>An energetic and dynamic personality.</li> </ul></p><p></p>