Heavy equipment mechanical engineer Jobs

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.</p> <p>Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement, and the complete and thorough cleanup of the painting or repair area.</p> <p>Test, troubleshoot, and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.</p> <p>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist</p><p></p>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.</p> <p>Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement, and the complete and thorough cleanup of the painting or repair area.</p> <p>Test, troubleshoot, and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers.</p> <p>Display basic computer skills including inputting air handler schedules and making temperature changes. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address</p><p></p>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.</p> <p>Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement, and the complete and thorough cleanup of the painting or repair area.</p> <p>Test, troubleshoot, and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers.</p> <p>Display basic computer skills including inputting air handler schedules and making temperature changes. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address</p><p></p>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.</p> <p>Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area.</p> <p>Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers.</p> <p>Display basic computer skills including inputting air handler schedules and making temperature changes. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs,</p><p></p>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.</p> <p>Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area.</p> <p>Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.</p> <p>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist</p><p></p>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.</p> <p>Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area.</p> <p>Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.</p> <p>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist</p><p></p>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.</p> <p>Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area.</p> <p>Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.</p> <p>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist</p><p></p>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.</p> <p>Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area.</p> <p>Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.</p> <p>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist</p><p></p>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.</p> <p>Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement, and the complete and thorough cleanup of the painting or repair area.</p> <p>Test, troubleshoot, and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.</p> <p>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist</p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Transport co-workers safely and punctually according to the approved routes and schedules. Ensure the assigned bus is maintained in a safe, clean, and roadworthy condition through regular inspections and maintenance checks. Strictly follow and adhere to the duty schedule (routes and bus timings) Follow all IKEA safety standards, traffic regulations, and road safety procedures. Represent IKEA professionally by providing a friendly and respectful experience for co-workers. Report any vehicle defects, accidents, or incidents immediately to the direct manager. Complete daily, weekly, and monthly vehicle checklists. Support the business by carrying out additional tasks assigned by the direct manager or P&amp;C Manager when required.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Primary School or High School Certificate. Valid Heavy Vehicle Driving Licence. Minimum 2 years of experience as a Heavy Vehicle Driver. Good knowledge of local roads and locations. Regular check ups and maintenance Good understanding of traffic laws and road safety regulations. Ability to understand and communicate in English and Arabic. Good physical fitness and ability to work flexible schedules if required.</p><p></p></section>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Journeyman.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash /cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work without supervision.</li> <li>Provides technical and directional leadership guidance to lower-level Aircraft Mechanics.</li> <li>Provides training to lower-level Aircraft Mechanics.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of three years of actual aircraft mechanic maintenance experience required.</li> <li>Minimum of one year experience on MQ-9 aircraft, as an aircraft mechanic.</li> <li>Must have comprehensive knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess comprehensive knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a comprehensive understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 aircraft composite repair / replacement experience.</li> </ul> <h4>Compensation details:</h4> <p>36.26</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.</p> <p>Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement, and the complete and thorough cleanup of the painting or repair area.</p> <p>Test, troubleshoot, and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.</p> <p>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist</p><p></p>

<p><h4>Optimiza overview</h4> <p>Optimiza is a regional systems integration and digital transformation company delivering consulting, business, and technology solutions across multiple industries. Our work brings together business and technology to help clients build stronger, more effective systems, and we are looking for engineers who enjoy solving complex technical challenges in fast-moving environments.</p> <p>As a microservices developer, you will play a key role in shaping backend solutions that support reliable, scalable digital platforms. This role is well suited to someone who enjoys building modern distributed systems, working across functions, and contributing to technology solutions that have meaningful impact across client and business needs.</p> <h4>Responsibilities</h4> <li>Design, build, and maintain robust microservices-based applications and RESTful APIs using modern architectural principles.</li> <li>Implement service-to-service communication using APIs, messaging queues (Kafka, RabbitMQ), and event-driven architectures.</li> <li>Ensure high availability, scalability, and performance of microservices under heavy load.</li> <li>Implement and enforce security standards including authentication, authorization, and data protection.</li> <li>Collaborate cross-functionally with front-end developers, DevOps teams, and system architects to deliver end-to-end solutions.</li> <li>Participate in code reviews and troubleshoot production issues related to backend integrations.</li> <li>Support CI/CD pipelines and deployment of containerized applications.</li> <h4>Requirements</h4> <p><strong>Education:</strong> Bachelor’s degree in computer science, software engineering, or a related technical field.</p> <p><strong>Experience:</strong> 3+ years of proven experience in backend or microservices development.</p> <p><strong>Core technical proficiency:</strong> Strong expertise in Java, with experience in Java 11 or Java 17+ preferred. Strong expertise in the Spring ecosystem, including Spring Boot, Spring Cloud, and Spring Data. Deep knowledge of microservices architecture and distributed systems. Extensive experience developing, documenting, and consuming RESTful APIs.</p> <p><strong>Database knowledge:</strong> Solid experience with both relational databases such as PostgreSQL or MySQL and NoSQL databases such as MongoDB or Redis, including ORM tools like Hibernate or JPA.</p> <p><strong>Messaging & async:</strong> Familiarity with messaging systems such as Apache Kafka, RabbitMQ, or similar.</p> <p><strong>Infrastructure & DevOps:</strong> Solid understanding of CI/CD tools such as Jenkins or GitLab CI and DevOps best practices. Hands-on experience with Docker and Kubernetes is highly preferred.</p> <p><strong>Legal / regulatory requirements:</strong> Eligible to work in Jordan.</p></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul> <h4>Compensation details:</h4> <p>$34.17 per hour</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting date: 05/06/2026 - Until filled</p> <p>The job requisition is expected to remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Title: Junior Mechanical Engineer</p><p><b>Location:</b> Amman, Jordan</p><p><b>Employment Type:</b> Full-time</p><p>About the Company</p><p>We are a certification body providing technical evaluation, testing, inspection, and compliance assessment services for products and equipment. Our work supports manufacturers, suppliers, and businesses in meeting applicable technical standards and regulatory requirements.</p><p>Job Summary</p><p>We are seeking a motivated <b>Junior Mechanical Engineer</b> to join our technical team in Amman. The role involves supporting mechanical product evaluations, technical reviews, inspections, testing activities, and compliance assessment processes under established engineering and certification frameworks.</p><p>This is an excellent opportunity for a fresh graduate or junior engineer to gain practical experience in mechanical engineering, product conformity assessment, testing, and certification.</p><p>Key Responsibilities</p><ul><li>Assist in mechanical product assessments and technical evaluations</li><li>Support inspection, testing, and conformity assessment activities</li><li>Review technical specifications, drawings, manuals, and related documentation</li><li>Prepare technical reports and assessment documentation</li><li>Assist senior engineers during inspections, audits, and testing activities</li><li>Maintain accurate records of inspection findings and assessment results</li><li>Support the evaluation of products against applicable mechanical standards and requirements</li><li>Ensure compliance with internal procedures and quality standards</li><li>Communicate with clients and manufacturers when required regarding technical documentation and assessment requirements</li></ul><p>Requirements</p><ul><li><b>Bachelor’s degree in Mechanical Engineering</b></li><li><b>Valid Mechanical Engineering certificate / professional certification</b></li><li>Fresh graduate or <b>0–2 years of relevant experience</b></li><li>Basic understanding of mechanical engineering principles</li><li>Ability to read and understand technical drawings and specifications</li><li>Strong analytical and documentation skills</li><li>Good English communication skills</li><li>High attention to detail and willingness to learn</li><li>Ability to work both independently and as part of a technical team</li></ul><p>What We Offer</p><ul><li>Structured training in product certification, testing, and conformity assessment</li><li>Practical exposure to mechanical products and technical evaluation processes</li><li>Opportunity to work with experienced engineers and technical specialists</li><li>Career development in engineering, certification, inspection, and compliance</li><li>Professional working environment in Amman</li></ul><p>Skills</p><p>Preferred</p><ul><li>Familiarity with mechanical standards, testing, inspection, or conformity assessment</li><li>Basic knowledge of ISO/IEC standards or product certification concepts</li><li>Ability to interpret engineering drawings and technical specifications</li><li>Interest in certification, inspection, auditing, or quality assurance</li><li>Ability to work in field environments and participate in inspections when required</li><li>Proficiency in Microsoft Office and technical documentation</li></ul><p>Preferred Candidate</p><p><b>Years of Experience</b></p><p>0–2 years</p><p><b>Residence Location</b></p><p>Jordan</p><p><b>Minimum Education</b></p><p>Bachelor’s degree in Mechanical Engineering</p><p><b>Career Level</b></p><p>Fresh Graduate / Junior</p><p><b>Professional Certification</b></p><p>Mechanical Engineering certificate required</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Strong understanding of mechanical products, equipment, and applicable technical requirements; ability to review product specifications, technical drawings, manuals, and test documentation; basic knowledge of mechanical testing, inspection, and conformity assessment; ability to assess products against applicable standards and certification requirements; strong technical report writing and documentation skills; attention to detail when reviewing test results and identifying non-conformities; ability to support factory inspections, product evaluations, and technical audits; good communication skills when dealing with clients and manufacturers; and willingness to learn and develop within the field of product certification, testing, and compliance.</p></div>

<p>Job Title: Junior Design Engineer HVAC or Mechanical Engineering Industry: Engineering / HVAC Solutions Location: Amman, Jordan (onsite) Job Summary: A well-known engineering solutions company is seeking a Junior Design Engineer to join its mechanical design team. This role is ideal for an early-career engineer looking to build hands-on experience in HVAC and mechanical design, working under the guidance of senior engineers on real client projects from concept through execution.</p><p>Key Responsibilities: Receive project requirements from the direct supervisor and review the basic technical data needed to start work. Support the design team in preparing appropriate technical solutions for projects in line with client requirements and approved specifications. Assist in preparing and reviewing load calculations, system selection, and technical components under the direct supervisor's guidance. Prepare and update master drawings and assist in preparing As-Built drawings in line with approved modifications. Coordinate with warehouses and relevant parties regarding materials and equipment required for the project, as directed. Assist in preparing and reviewing quantity schedules, drawings, and technical proposals before issuance. Ensure that proposed technical solutions align with project requirements and the direct supervisor's guidance. Ensure that proposed technical solutions align with project requirements and the direct supervisor's guidance. Coordinate with the supply chain regarding materials or technical alternatives when needed, within the scope of work. Support the Sales Department in preparing the data or technical outputs required for proposals and projects. Coordinate with the Operations Department to follow up on any technical remarks or modifications related to implementation. Update files, references, and the technical library related to drawings, products, and specifications. Review recurring technical remarks and use them to improve the accuracy and quality of technical outputs. Adhere to the approved work plan and complete required technical tasks within the specified time and quality standards. Develop technical knowledge and practical skills through direct guidance and continuous on-the-job learning. Prepare and submit reports or technical updates required by the direct supervisor, as per standard procedure.</p><p><strong>Desired Candidate Profile</strong></p><p>Qualifications: Bachelor's degree in Mechanical Engineering or HVAC (Air Conditioning &amp; Refrigeration) Engineering. Specialized courses in design software are preferred.</p><p>Required experience: 1-2 years of experience in HVAC systems design. Experience in preparing load calculations and selecting suitable equipment. Experience in preparing BOQs, drawings, and technical proposals. Experience in reviewing and revising drawings and technical specifications. Proficient in AutoCAD. Proficient in HAP, Elite, or similar software. Proficiency in Revit MEP or equipment-selection software is preferred. Proficient in computer use and related office systems. Proficient in Microsoft Office applications, as required by the role. Proficient in Arabic and English (reading, writing, and speaking).</p>

<p><br></p><p>Scope of the Position The Systems Administrator is responsible for the effective provisioning, installation, configuration, operation, and maintenance of systems hardware, software, and related infrastructure in both Windows and Linux environments. This role ensures that IT systems run efficiently and securely, serving the needs of the organization. The candidate will work with various teams to design and implement solutions that enhance IT service delivery.</p><p>Primary Duties and Responsibilities</p><p>System Administration (Windows &amp; Linux):</p><ul><li>Manage and maintain both Windows Server and Linux environments, ensuring high availability, security, and performance.</li><li>Install, configure, and update server operating systems, applications, and related infrastructure.</li><li>Monitor server health, performance, and security to identify and resolve potential issues.</li><li>Perform system backups, restore operations, and disaster recovery planning.</li><li>Manage user accounts, permissions, and access control on both Windows and Linux systems.</li></ul><p>Security &amp; Compliance:</p><ul><li>Implement and maintain security protocols, patch management, and vulnerability assessments for both environments.</li><li>Ensure systems comply with relevant industry standards and regulations (e.g., SOC2, PCI-DSS , GDPR).</li><li>Administer Active Directory (AD) and domain security policies on Windows systems.</li></ul><p>Networking &amp; Infrastructure:</p><ul><li>Collaborate with network and security teams to optimize system integrations and improve IT infrastructure resilience.</li></ul><p>Automation &amp; Scripting:</p><ul><li>Develop and maintain automation scripts for routine tasks using PowerShell, Bash, Python, or other scripting languages.</li><li>Automate system deployments, monitoring, and updates for both Windows and Linux environments.</li></ul><p>Virtualization &amp; Cloud:</p><ul><li>Manage virtualization platforms such as VMware, Hyper-V, or other hypervisors.</li><li>Support cloud infrastructure (e.g., AWS, Azure) as part of a hybrid environment, managing servers and services deployed in the cloud.</li><li>Migrate workloads between on-premises and cloud platforms when needed.</li></ul><p>Technical Support &amp; Troubleshooting:</p><ul><li>Provide advanced troubleshooting support for system issues, ensuring timely resolution of critical incidents.</li><li>Collaborate with helpdesk and other IT staff to provide technical assistance and training to end-users.</li><li>Document system configurations, procedures, and troubleshooting guides for future reference.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in computer science, Information Technology, or a related field (or equivalent work experience).</li><li>3-5 years of experience as a Systems Administrator or similar role, with experience managing both Windows and Linux environments.</li><li>Strong knowledge of Windows Server (Active Directory, Group Policy, DNS, DHCP) and Linux distributions (Red Hat, Ubuntu, CentOS).</li><li>Proficiency with scripting and automation using PowerShell, Bash, or Python.</li><li>Experience with virtualization technologies (e.g., VMware, Hyper-V).</li><li>Familiarity with cloud environments (AWS, Azure, or GCP).</li><li>Solid understanding of networking concepts and protocols (e.g., TCP/IP, DNS, VPN).</li><li>Relevant certifications are a plus (e.g., Microsoft Certified: Windows Server, CompTIA Linux+, Red Hat Certified System Administrator, AWS Certified SysOps Administrator).</li><li>Working at a desk on a computer for long periods of time.</li><li>Lifting heavy equipment, such as servers.</li><li>Requires occasional on-call support for critical system incidents and maintenance during off-hours.</li></ul>

<p><br></p><p>As a Multi-disciplinary design Engineer, you will play a pivotal role in the detailed design of multi-disciplinary infrastructure works. Your responsibilities will include developing coordinated design deliverables across electrical, mechanical, instrumentation, and control systems for industrial projects. The role focuses on producing accurate, constructible, and fully coordinated designs, drawings and layouts in close collaboration with lead design engineers and other disciplines.</p><p>Project Context : Haskoning is engaged in multiple projects at the Arab Potash Corporation (APC), which involves critical infrastructure works in the Dead Sea Area. The design Engineer will be supporting the design team, coordinating with other disciplines, and ensuring consistency across all project phases.</p><p>Key Responsibilities</p><ul><li>Prepare multidisciplinary design deliverables in accordance with project specifications, applicable codes, and standards</li><li>Coordinate layouts and interfaces between electrical, mechanical, civil, structural, and process disciplines</li><li>Support constructability, safety, and maintainability through design</li><li>Ensure drawing quality, consistency, and adherence to project CAD/BIM standards</li><li>Participate in design reviews, model reviews, and coordination meetings</li></ul><p>Specific discipline requirements</p><p>Electrical Design</p><ul><li>Develop layouts for LV/MV systems, including:</li><li>Power distribution</li><li>MCCs, switchgear, transformers</li><li>Cable routing and containment (trays, ladders, conduits)</li><li>Earthing and lightning protection systems</li><li>Prepare single-line diagrams, load layouts, and equipment arrangement drawings</li><li>Coordinate electrical room layouts and access/clearance requirements</li></ul><p>Mechanical Design</p><ul><li>Prepare layouts for mechanical equipment such as:</li><li>Pumps, motors, compressors, valves</li><li>Skids, pipework, supports, and access platforms</li><li>Develop general arrangement (GA) drawings and mechanical layouts</li><li>Coordinate mechanical interfaces with electrical and instrumentation systems</li><li>Incorporate installation, maintenance, and lifting requirements into designs</li></ul><p>Instrumentation &amp; Control Design</p><ul><li>Develop instrumentation layouts, including:</li><li>Field instruments, panels, and junction boxes</li><li>Instrument tubing and impulse lines</li><li>Analyzer shelters and instrument air systems</li><li>Prepare cable and tubing routing layouts</li><li>Assist with I/O layouts, control panel arrangements, and interface diagrams</li><li>Coordinate with control systems engineers for PLC/SCADA-related layouts</li></ul><p>Coordination &amp; Documentation</p><ul><li>Ensure clash-free and coordinated designs across all EMI&amp;C discipline</li><li>Support preparation of:</li><li>Layout drawings</li><li>Section details</li><li>Typical installation details</li><li>Incorporate comments from engineering reviews, HAZOPs, and constructability reviews</li><li>Assist in preparation of as-built drawings</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in Electrical, Mechanical, Instrumentation Engineering, or related technical discipline, Master degree is preferred</p><p>Minimum 10 years of experience in industrial or infrastructure projects</p><p>Proven experience working on multidisciplinary EMI&amp;C designs</p><p>Experience in EPC or consultant environments is an advantage</p><p>Attention to detail and ability to manage multiple tasks</p><p>Excellent skills with MS Office suite</p><p>Good communication skills and a collaborative approach to working with multidisciplinary and cultural teams</p><p>Professionally skilled in english</p><p>Familiarity with international standards (e.g., BS, DIN, ASTM, IEEE, IEC, API, ISO)</p><p>Start Date: as soon as possible</p><p>Location Requirement: You must be currently based in Jordan or the surrounding Dead Sea region. Due to project requirements, candidates must be available to work on-site and align with the local working schedule and time zone.</p>

<p>PIPECARE Group is looking for an experienced Mechanical Engineer to join our team . By providing technology and service focused solutions to the international arena of the oil and gas industry, the PipeCare Group of companies has been helping our customers ensure the integrity of their pipeline and facility assets for over 25 years. Industry/sector: Oil &amp; Gas / In Line Inspection services.</p><p>Mechanical Engineer is responsible for performing comprehensive Fitness-for-Service assessment studies on client s pipelines using API 579 and other international standards.</p><p>Key Responsibilities &amp; Authorities</p><ul><li>Perform FFP evaluations of clients assets based on Level 1 &amp; 2 assessments of damage mechanisms.</li><li>Performing RSTRENG calculations per clients requirements.</li><li>Perform Abaqus simulation models for corroded components.</li><li>Integrate inspection data into Abaqus simulation and perform analysis for degraded components.</li><li>Evaluate repair options and make recommendations to clients.</li></ul><p>Team leadership and collaboration</p><ul><li>Develop training material related to Pipeline Integrity.</li><li>Lead, mentor, and train a team of Integrity Engineers within the corporation, ensuring their skills are up-to-date and that they are consistently applying high-quality standards.</li><li>Act as the primary subject matter expert (SME) on Integrity Engineering during internal and external audits.</li><li>Liaise with clients, project managers, and integrity engineers to understand project requirements and provide data-driven insights to support decision-making.</li><li>Communicate complex findings and data-driven narratives to senior management and other non-technical stakeholders.</li></ul><p>Skills/Experience</p><ul><li>Minimum of Bachelor s Degree in Mechanical Engineering.</li><li>3-5 years experience in Oil and Gas industry.</li><li>Experience in API 579, ASME codes, Abaqus.</li><li>Strong professional command of written and spoken English in addition to communication skills is a must.</li></ul><p>Physical and Mental Requirements:</p><ul><li>Lifting and Carrying: Ability to lift and carry up to 50 pounds.</li><li>Mobility: Must be able to walk and climb to perform duties, including maneuvering within a refinery or plant environment and accessing elevated platforms via ladders and stairwells.</li><li>Communication: Sufficient clarity of speech and hearing, or other communication capabilities, to communicate effectively.</li><li>Focus and Multitasking: Ability to maintain focus and multitask effectively.</li><li>Safety Equipment: Must be able to wear safety equipment as required by the safety department for personal protection, if/where needed in manufacturing environments.</li><li>Personal Mobility and Reflexes: Sufficient personal mobility and physical reflexes, with or without reasonable accommodations, to perform office duties and travel to off-site locations when necessary.</li></ul><p>About PIPECARE Group:</p><p>PIPECARE Group offers comprehensive In-Line Inspection Services to identify and size pipeline threats, Utilizing advanced technologies such as Magnetic Flux Leakage, Transverse Field Inspection, Ultrasound, and specialized tools, PIPECARE ensures precise detection and assessment of various pipeline anomalies.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum of Bachelor s Degree in Mechanical Engineering.</li><li>3-5 years experience in Oil and Gas industry.</li><li>Experience in API 579, ASME codes, Abaqus.</li><li>Strong professional command of written and spoken English in addition to communication skills is a must.</li></ul><p>Physical and Mental Requirements:</p><ul><li>Lifting and Carrying: Ability to lift and carry up to 50 pounds.</li><li>Mobility: Must be able to walk and climb to perform duties, including maneuvering within a refinery or plant environment and accessing elevated platforms via ladders and stairwells.</li><li>Communication: Sufficient clarity of speech and hearing, or other communication capabilities, to communicate effectively.</li><li>Focus and Multitasking: Ability to maintain focus and multitask effectively.</li><li>Safety Equipment: Must be able to wear safety equipment as required by the safety department for personal protection, if/where needed in manufacturing environments.</li><li>Personal Mobility and Reflexes: Sufficient personal mobility and physical reflexes, with or without reasonable accommodations, to perform office duties and travel to off-site locations when necessary.</li></ul>