Oil

<p>Perform daily process engineering support necessary for all QatarEnergy LNG operated facilities to ensure safe, reliable and efficient operations.</p><p>Perform day-to-day process surveillance activities in compliance with QLMS ASV L3 process Perform Plant Facilities Surveillance for all QatarEnergy LNG assets to ensure safe, reliable and optimum production. Prepare surveillance report highlighting threats and deviations, recommend trouble shooting and ensure timely escalation of concerns. Monitor the system and process efficiencies to help improve asset performance and provide advances engineering solutions in compliance with the existing procedures and operating manuals. Support Process Engineering support to EMOCs, other process engineering studies for the assigned area and conduct the assigned EMOCs and AIR. Participate and support in the contribution in FRAs, RCFAs, RS, HAZOPs, HAZID and other assessments to address process safety and reliability issues. Support shutdown activities for the assigned asset, including shutdown scoping and planning for process related activities.</p><p>Assist in engineering call-out roster for assets to address Operations requests for after-hours process engineering support as required. Attend regular Operations meetings (e.g., daily operations meetings, ALT meetings, SHE committee meetings, etc.), to share input on operational inquires requiring Process Engineering Support. Communicate regularly with Process Engineering Lead to provide updates and highlight the key issues to ensure proper management support. Provide preliminary analysis and design to process engineering project queries. Support in the development of the annual business plan assumptions data for Corporate Planning department in compliance with Annual Business Plan Assumptions Procedure.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in engineering.</p><p>6 years experience in an oil and gas environment.</p>

<p>Maintain launch/recover UC-35 Cessna Citation aircraft. Troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</p><p>Principal Accountabilities:</p><ul><li>Operationally checks repaired or modified systems for proper operation.</li><li>Performs quality maintenance on assigned aircraft in accordance with federal aviation regulations, original equipment manufacturers, or military technical orders as specified in the statement of work instructions.</li><li>Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.</li><li>Read and interpret manufacturers' and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</li><li>Examine engines for oil leaks, and listens to operating engine to detect and diagnose malfunctions.</li><li>Inspect turbine blades to detect cracks or breaks.</li><li>Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction.</li><li>Replace or repair worn or damaged components using hand tools, gauges, and test equipment.</li><li>Remove and install engine from aircraft.</li><li>Disassemble and inspect parts for wear, warping, or other defects.</li><li>Repair or replace defective engine parts and reassembles and installs engine in aircraft.</li><li>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</li><li>May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.</li><li>May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies.</li><li>May specialize in engine repair.</li><li>Perform other qualified duties as assigned.</li></ul><p>Knowledge &amp; Skills</p><ul><li>Knowledge of aircraft sub-systems, including maintenance parameter, systems operation, limitations, and technical orders.</li><li>Ability to become qualified and perform engine runs for the aircraft type they are assigned to support.</li><li>Ability to read, write, and interpret technical duties is required.</li><li>Ability to communicate effectively with all levels of employees throughout the organization.</li><li>Proven track record demonstrating adaptability to change and the ability to respond to challenges in a changing environment.</li></ul><p>Minimum Qualifications:</p><ul><li>Valid FAA A&amp;P Certificate Required.</li><li>All mechanics assigned to perform maintenance on FAA certified aircraft must meet FAA requirements.</li><li>Recent full-time experience in aviation maintenance with the assigned aircraft during the past 12 months.</li><li>Three (3) or more years aircraft mechanic experience as an aircraft mechanic on assigned aircraft required, five (5) years preferred.</li><li>Six (6) months of flight line and overhaul &amp; inspection experience</li><li>Completion of formal maintenance training on assigned aircraft is desired.</li><li>Qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training.</li><li>High school diploma or equivalent.</li><li>Tools are provided by Amentum.</li></ul><p>Security Clearance Requirements:</p><ul><li>Must be able to obtain and maintain a US Govt DoW Secret Security Clearance. Must be able to obtain and maintain facility credentials and authorization. US Citizenship is Required to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility.</li></ul><p>Physical Requirements/Working Environment</p><ul><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to carry, push or pull up to and may exceed 50 pounds.</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.</li><li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Must be able to see imperfections, micrometer readings and other small scales.</li><li>Must be able to read and interpret newspaper and typewritten print.</li><li>Must be able to communicate by voice and detect sounds by ear over telephone.</li><li>Must be able to distinguish color and judge three dimensional depths.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, APU, etc.</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li><li>Must be capable of living and working in a potentially hostile environment for an extended period.</li><li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li><li>May be exposed to extreme noise from turbine and jet engine aircraft.</li><li>May be exposed to fumes or airborne particles. May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft.</li><li>Must be able to travel internationally to and between remote locations in austere and/or hostile environments.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Valid FAA A&amp;P Certificate Required.</li><li>All mechanics assigned to perform maintenance on FAA certified aircraft must meet FAA requirements.</li><li>Recent full-time experience in aviation maintenance with the assigned aircraft during the past 12 months.</li><li>Three (3) or more years aircraft mechanic experience as an aircraft mechanic on assigned aircraft required, five (5) years preferred.</li><li>Six (6) months of flight line and overhaul &amp; inspection experience</li><li>Completion of formal maintenance training on assigned aircraft is desired.</li><li>Qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training.</li><li>High school diploma or equivalent.</li><li>Tools are provided by Amentum.</li><li>Must be able to obtain and maintain a US Govt DoW Secret Security Clearance. Must be able to obtain and maintain facility credentials and authorization. US Citizenship is Required to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to carry, push or pull up to and may exceed 50 pounds.</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.</li><li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Must be able to see imperfections, micrometer readings and other small scales.</li><li>Must be able to read and interpret newspaper and typewritten print.</li><li>Must be able to communicate by voice and detect sounds by ear over telephone.</li><li>Must be able to distinguish color and judge three dimensional depths.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, APU, etc.</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li><li>Must be capable of living and working in a potentially hostile environment for an extended period.</li><li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li><li>May be exposed to extreme noise from turbine and jet engine aircraft.</li><li>May be exposed to fumes or airborne particles. May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft.</li><li>Must be able to travel internationally to and between remote locations in austere and/or hostile environments.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>JOB PURPOSE / OBJECTIVE</strong>&nbsp;</p><p>Provide advanced technical expertise, supervision, and quality control for all scaffolding, insulation, and painting (SIP) activities across company facilities. Ensure safe execution, compliance with international standards, and support maintenance, shutdowns, and project activities to maintain plant integrity and reliability.&nbsp;</p><br><p><strong>KEY ACCOUNTABILITIES</strong>&nbsp;</p><p><strong>Scaffolding Activities</strong>&nbsp;</p><ul><li><p>Supervise erection, modification, and dismantling of scaffolds in accordance with company HSE standards and international codes (e.g., BS EN, OSHA).&nbsp;</p></li></ul><ul><li><p>Review scaffold design drawings and ensure proper load capacity and tagging system.&nbsp;</p></li></ul><ul><li><p>Conduct inspections and certify scaffolds prior to use.&nbsp;</p></li></ul><ul><li><p>Ensure scaffolding supports maintenance, turnaround (TA), and project requirements.&nbsp;</p></li></ul><p><strong>Insulation Works</strong>&nbsp;</p><ul><li><p>Monitor installation and removal of thermal and cold insulation systems for piping, vessels, and equipment.&nbsp;</p></li></ul><ul><li><p>Ensure correct material selection (e.g., mineral wool, calcium silicate, PIR) in accordance with approved specifications and service requirements.&nbsp;</p></li></ul><ul><li><p>Verify compliance with specifications to prevent heat loss, condensation, and corrosion under insulation (CUI).&nbsp;</p></li></ul><ul><li><p>Coordinate insulation reinstatement post-maintenance to restore system integrity and operational efficiency.&nbsp;</p></li></ul><p><strong>Painting &amp; Coating</strong>&nbsp;</p><ul><li><p>Supervise surface preparation (blasting, cleaning) and coating applications.&nbsp;</p></li></ul><ul><li><p>Ensure proper application of protective coatings for corrosion control.&nbsp;</p></li></ul><ul><li><p>Verify paint systems per company and international standards (e.g., SSPC, NACE).&nbsp;</p></li></ul><ul><li><p>Monitor environmental conditions (humidity, temperature, dew point).&nbsp;</p></li></ul><p><strong>Maintenance &amp; Turnaround Support</strong>&nbsp;</p><ul><li><p>Support maintenance and turnaround activities by coordinating SIP works during plant shutdowns and turnaround periods. Ensure timely execution to avoid delays in critical path activities.&nbsp;</p></li></ul><ul><li><p>Liaise with maintenance, operations, and contractors’ teams to ensure safe, timely, and coordinated execution of work.&nbsp;</p></li></ul><p><strong>Team Leadership</strong>&nbsp;</p><ul><li><p>Guide and mentor technicians and contractors to ensure safe and efficient execution of scaffolding, insulation, and painting activities.&nbsp;</p></li></ul><ul><li><p>Ensure workforce competency and productivity with company standards, procedures, and safety requirements.&nbsp;</p></li></ul><ul><li><p>Plan, coordinate, and prioritize daily maintenance activities to meet operational schedules and maintain continuous plant reliability.&nbsp;</p></li></ul><p><strong>Policies, Systems, Processes and Procedures</strong>&nbsp;</p><ul><li><p>Contribute to the identification of opportunities for the continuous improvement of Departmental systems, policies, processes and practices taking into account ‘international leading practices’ in order to improve productivity and operational efficiency.&nbsp;</p></li></ul><ul><li><p>Provide critical input to support the development of Section’s systems, policies, processes, and procedures in order to meet business requirements.&nbsp;</p></li></ul><ul><li><p>Implement all relevant Section’s policies, processes, procedures and instructions so that work is carried out in a controlled and consistent manner.&nbsp;</p></li></ul><p><strong>Quality, Health, Security, Safety and Environment</strong>&nbsp;</p><ul><li><p>Ensure compliance with Life Critical Procedures, Tenets of Operations, Consent to Operate, plant policies and procedures,&nbsp;</p></li></ul><ul><li><p>Enforce company Safety Procedures, Permit to Work (PTW), and LT&amp;T systems.&nbsp;</p></li></ul><ul><li><p>Conduct toolbox talks and job safety analysis (JSA).&nbsp;</p></li></ul><ul><li><p>Ensure all SIP activities comply with Company regulations and site policies.&nbsp;</p></li></ul><ul><li><p>Identify hazards and implement mitigation measures.&nbsp;</p></li></ul><ul><li><p>Perform routine inspections and audits of SIP work.&nbsp;</p></li></ul><ul><li><p>Ensure documentation, reports, and checklists are completed accurately.&nbsp;</p></li></ul><ul><li><p>Verify contractor performance and adherence to specifications.&nbsp;</p></li></ul><p><strong>Reporting</strong>&nbsp;</p><ul><li><p>Prepare and submit Daily Shift Reports in a timely and accurate manner in order to meet the Departmental requirements, policies and standards.&nbsp;</p></li></ul><ul><li><p>Report incidents and near misses.&nbsp;&nbsp; Perform investigations, determine root cause and assign necessary action items.&nbsp;</p></li></ul><p><strong>Qatarization</strong>&nbsp;</p><ul><li><p>Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.&nbsp;</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>QUALIFICATIONS &amp; EXPERIENCE</strong>&nbsp;</p><p><strong>Education</strong>&nbsp;</p><ul><li><p>Required: Diploma in Mechanical Engineering or equivalent Technical field.&nbsp;</p></li></ul><br><p><strong>Experience</strong>&nbsp;</p><ul><li><p>Required: 5-7 years in petrochemical or oil &amp; gas industry.&nbsp;</p></li></ul><ul><li><p>Preferred: Experience in Petrochemicals Industry.&nbsp;</p></li></ul><br><p><strong>Other Job Specific Requirements and/or Vocational Accreditations</strong>&nbsp;</p><ul><li><p>Relevant certifications in scaffolding (e.g., CISRS or equivalent)&nbsp;</p></li></ul><ul><li><p>Coating/painting certification (e.g., NACE Level 1 or higher preferred)&nbsp;</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Senior Civil / Structural Engineer</strong><br> <strong>Qualifications</strong><ul><li>Bachelor's Degree in Civil Engineering (Master's in Structural Engineering preferred).</li><li>Professional Engineer registration is an advantage.</li></ul><strong>Experience</strong><ul><li>10+ years in structural design and construction of large buildings and infrastructure projects.</li><li>Minimum 6 years in a supervisory role.</li><li>Experience in structural engineering, project management, and construction activities.</li><li>Knowledge of BS, EN, ASTM, and relevant industry standards.</li><li>Experience with water-retaining structures, dewatering, commissioning, and handover activities preferred.</li><li>Proficient in MS Office and structural design software.</li><li>Strong communication and technical reporting skills.</li></ul><strong>Key Responsibilities</strong><ul><li>Provide civil/structural engineering support across project phases.</li><li>Review and approve drawings, specifications, calculations, materials, and method statements.</li><li>Ensure compliance with project requirements, codes, and engineering standards.</li><li>Support pre-commissioning, commissioning, and handover activities.</li><li>Evaluate technical bids, variations, and engineering proposals.</li><li>Coordinate with consultants, contractors, and multidisciplinary engineering teams.</li><li>Resolve technical issues and provide engineering recommendations.</li><li>Support project delivery with a focus on safety, quality, schedule, and cost.</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide a variety of Electrical Engineering support to contribute to the division strategy and goals which include design reviews, commissioning, start-up, failure analysis and advanced troubleshooting.</p><p>Develop and implement surveillance and administration programs for critical Electrical Systems of new projects to achieve high standards of reliability, availability and cyber security.</p><p>Define and document best practices within the area of expertise and recommend performance improvement initiatives.</p><p>Develop plans and work schedules to ensure effective completion of tasks and activities, meeting the section and division KPIs.</p><p>Provide technical input related to area of expertise to other disciplines and functions as per requirements to support overall business objectives.</p><p>Control and supervise the electrical engineering activities undertaken by contractors, consultants and service providers.</p><p>Guide less experienced engineers in implementing the company integrity and reliability systems.</p><p>Support and facilitate smooth completion of project tie-in requirements for all systems under the area of responsibility.</p><p>Maintain Issue Register identifying and resolving critical issues including new technology risks under area of responsibility which could impact new project reliability, availability and cyber security.</p><p>Support high risk commissioning activities for high complexities &amp; large-scale projects by undertaking stringent system surveillance, tuning and optimizing electrical systems, and providing advisory support to Operations and Maintenance.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree in Engineering.</p><p>8 years' experience in an oil and gas environment.</p><p>Attained specialist level of competencies as per electrical technical competencies.</p><p>Able to work and make decisions under highly stressing conditions.</p><p>Fluent in written and spoken English.</p><p>Strong leadership &amp; people skills.</p><p>Computer literacy involving the regular use of professional office and technical applications.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible for leading and coordinating Project Teams formed to provide complete project management services to execute assigned projects in onshore/offshore areas from inception to completion and handover.</p><p>Prepare and implement Project Execution and QHSE Plans for all assigned projects.</p><p>Participate and monitor Planning, Cost Control, Budgeting, Contract Administration, Progress Reporting, Change Management and Gate Approval activities.</p><p>Manage and coordinate a Team of multidiscipline Engineers to achieve a cost-effective design through timely resolution of technical and engineering issues.</p><p>Participate in the preparation of tender packages, tendering process, evaluation of tenders and submissions with appropriate recommendations to relevant Tender Committees.</p><p>Generate and maintain risk registers by updating these in order to ensure that risks are managed and mitigated.</p><p>Interface closely with End User and other stakeholders including government and statutory authorities, other third-party entities such as JVs.</p><p>Participate in the processing and resolution of Variations and Contractor's claims.</p><p>Participate in the review and development of procedures and guidelines as and when assigned.</p><p>Mentor Qatari Developees by ensuring that they receive proper job training in order to realize their full potential.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Sc. in an Engineering discipline from a recognized University; higher degree would be advantageous. Membership in a recognized professional engineering/project management association/institution will be an added advantage.</p><p>A minimum of twelve (12) years' experience in engineering, project management and execution of oil &amp; gas projects.</p><p>Experienced in engineering coordination with various discipline Engineers during Feasibility and Concept Optimization Studies, FEED and EPIC.</p><p>Effective communication and team building skills including presentation, report writing and management of meetings.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications: Carry out overhaul, preventive, corrective, predictive, breakdown maintenance, troubleshooting and diagnostic activities related to MECHANICAL STATIC ASPECTS of process and non-process equipment and its sub-systems as below equipment: 1. Static aspect of Pumps (Valves, pipe and pipe support, expansion bellows and fittings). 2. Static aspects of Cooling Tower (Infills, nozzles, basin, fan stack, and GRP structure) 3. Tank (Structures, valves and fittings, air vents) 4. Air handling Units (Filter, ducting, AHU Housing) 5. Filtration system (Filters, housings, pipe and fittings) 6. Chemical Dosing Pumps, Tanks, Pipe and Fittings system 7. Corrosion racks, sampling, blowdown and chemical dosing pipe systems Supervise, guide and monitor work done by external vendors. Prepare and submit technical log reports, checklist or forms as part of daily routine work. Obtain spare parts, materials, and consumables either from internal store or external location. Utilize, maintain and safe keep specific tools assigned by company. Maintain proper tools, PPE s, Spares and provide annual requirements. Respond to emergency situations during or after hours as part of business continuity. Utilize Computer Maintenance Management Systems (CMMS) as per QCFE. Where applicable, aid and support to other team members within and across the discipline, whenever required. Participate in QC provided training as deemed fit by management. Perform any other related duty as assigned by the immediate supervisor, in accordance with the provisions of the labor law.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Summary :</strong></p><br><p>We are looking for an Industrial Automation Engineer with hands-on experience in PLC, HMI, and SCADA programming, testing, and commissioning across Water &amp; Wastewater, HVAC, Oil &amp; Gas, and other industries. The ideal candidate should be able to work independently, manage tasks effectively, deliver excellent customer service, and demonstrate a strong willingness to learn, grow, and advance professionally.</p><br><p><strong>Roles &amp; Responsibilities :</strong></p><br><ul><li>Develop and execute PLC programs and test plans to ensure reliable and functional automation systems.</li><li>Develop SCADA/HMI graphics and implement automation solutions based on client requirements.</li><li>Perform pre-commissioning activities, including cable termination verification, loop checking, and related checks.</li><li>Conduct field testing, commissioning, and SAT at client sites.</li><li>Prepare and maintain project documentation, including functional specifications, I/O lists, and system architecture diagrams.</li><li>Maintain proper software versions, programming tools, and program backups.</li><li>Provide technical support, troubleshooting, and root cause analysis for automation systems.</li><li>Understand task requirements and apply appropriate technical skills and knowledge to deliver solutions.</li><li>Manage medium to high-complexity tasks in accordance with defined standards and procedures.</li><li>Document procedures, findings, root causes, and recommendations for completed tasks.</li><li>Work closely with Sales and Project teams to understand client requirements and develop suitable solutions.</li><li>Demonstrate resilience, persistence, attention to detail, and strong organizational skills.</li><li>Maintain excellent interpersonal, consulting, communication, and technical presentation skills.</li></ul><p><strong>QHSE Responsibilities :</strong></p><br><ul><li>Comply with all QHSE standards, policies, and procedures relevant to your work.</li><li>Actively participate in QHSE meetings and complete all required safety inductions and trainings.</li><li>Identify and report unsafe conditions; take corrective action where possible within your scope.</li><li>Follow guidance provided by QHSE officers and use PPE and emergency equipment correctly.</li><li>Support a safe work environment by cooperating with safety practices and encouraging others to do the same.</li></ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><div> <div> <div> <strong>Key Job Accountabilities - I</strong> </div> <div> <ul> <li> Plan, allocate and supervise the activities of subordinate staff in an allocated area to ensure operational targets are met with quality.<br> </li> <li> Participate in the development and post-approval implementation of production procedures and practices. Conduct continuous reviews to identify potential enhancements.<br> </li> <li> Participate in developing manpower plans for the deployment of staff and continually monitor progress and priorities, making necessary adjustments to meet changing needs. Perform safety and WM site audit according to established process and ensure compliance.<br> </li> <li> Support Operations Coordinator in day-to-day maintenance planning and co-ordinate all activities to ensure equipment s are in optimum operating condition and that downtime is kept to a minimum.<br> </li> <li> Facilitate work continuity and procedural compliance through authorising works, logging of shift activities, ensuring availability of cost-effective levels of consumables and providing shift handover briefings.<br> </li> </ul> </div> <div> <strong>Key Job Accountabilities - II</strong> </div> <div> <ul> <li> Inspect and control the work execution in all respect of the procedures, specifications, safety and environmental protection.<br> </li> <li> Ensure required competencies of team members are met and identify training gaps, recommend and implement training and development programs for Operators and Nationals on development program.<br> </li> <li> Act as Incident Controller during emergencies in allocated area, with responsibility for deciding on first-line intervention action. Communicate and provide incident briefings to company superiors, as appropriate<br> </li> <li> Participate in RBWS, Risk Screening, Re-Hazop and Safety Cases to ensure a quality input to different risk management systems and processes.<br> </li> <li> Prepare regular shift reports and adhoc reports requested by the line.<br> </li> </ul> </div> </div> </div></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><div> <div> <ul> <li> Completion of Secondary School Education (12 years) and a Vocational Training Programme Certificate</li> </ul> </div> </div> <div> <div> <ul> <li> 10 years experience in the oil and gas sector.<br> </li> <li> Substantial knowledge of all operational aspects of production equipment and control systems in the designated area</li> </ul> </div> </div><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b>Overview<p>Seeking an experienced Senior Mechanical Engineer with 12+ years of experience in the supervision, coordination, and delivery of mission-critical mechanical systems for large-scale data center projects. The role will be responsible for overseeing HVAC, cooling, plumbing, fire protection, and fuel systems, ensuring compliance with project specifications, industry standards, and operational reliability requirements.</p><br>Your role<ul><li>Supervise mechanical construction activities for data center projects, ensuring compliance with approved drawings, specifications, and project requirements.</li><li>Oversee the installation, testing, and commissioning of HVAC systems, chilled water networks, cooling plants, and air distribution systems.</li><li>Monitor the installation and performance of CRAH, CRAC, in-row cooling, and other mission-critical data center cooling systems.</li><li>Review mechanical shop drawings, material submittals, method statements, and technical submissions.</li><li>Coordinate mechanical works with civil, structural, architectural, electrical, ICT, and specialist contractor activities.</li><li>Conduct site inspections and quality audits to verify workmanship, material compliance, and adherence to project standards.</li><li>Monitor installation of plumbing, drainage, fuel oil, and fire protection systems, ensuring compliance with local regulations and project specifications.</li><li>Review pressure testing, flushing, cleaning, and pre-commissioning activities for mechanical systems.</li><li>Witness and verify Testing, Adjusting, and Balancing (TAB) activities to ensure systems achieve required operational performance.</li><li>Support testing and commissioning activities, integrated systems testing (IST), and operational readiness reviews.</li><li>Identify and resolve mechanical design, construction, and interface issues in coordination with project stakeholders.</li><li>Ensure contractor compliance with project quality requirements, safety procedures, and construction schedules.</li><li>Monitor contractor progress, resources, and productivity, identifying risks and recommending corrective actions where required.</li><li>Review mechanical inspection requests and maintain QA/QC records, site observations, and non-conformance reports.</li><li>Participate in multidisciplinary coordination meetings and provide technical recommendations on mechanical engineering matters.</li><li>Support authority inspections, client walkthroughs, snagging activities, and final project handover.</li><li>Prepare progress reports, technical assessments, and project status updates for client and consultant management teams.</li></ul>About you<ul><li>Bachelor's degree in Mechanical Engineering. UPDA/MMUP Grade A</li><li>Data Center Experience [at least 1 project is delivered in the last 5 years]</li><li>Data Center Experience [at least 1 project is delivered in the last 5 years] Mandatory.</li><li><span>12+ years of experience.</span></li><li><span>HVAC, chilled water, cooling systems, CRAH/CRAC or data centre cooling, plumbing, fire protection, fuel systems, pressure testing, TAB, commissioning and MEP coordination. Data centre or mission-critical cooling experience preferred.</span></li></ul><span>Rewards &amp; benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li>Tax-free salary.</li><li>Life insurance coverage.</li><li>Medical insurance.</li><li>Annual leave balance.</li><li>Company gratuity scheme.</li><li>Discretionary bonus program.</li><li>Annual flight contribution.</li><li>Transportation &amp; housing allowances.</li><li>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><p><span>About AtkinsRéalis</span></p><br><p><span>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. </span></p><br><p><span>Find out more.</span></p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Plan and support Instrumentation/Fire &amp; Gas (F&amp;G) Engineering activities with Sr. Engineer level competency during and Startup phase until handover to permanent Asset whilst ensuring project deliverables meet Operations expectations in term of Safety, Operability, Reliability and Maintainability over the facility design life cycle.</li> </ul><br><ul> <li>Provide a variety of Instrument/F&amp;G engineering supports to contribute to the division strategy and goals which include design reviews (e.g., SIL workshops, assessment and verification, HAZOP, etc.), commissioning, startup, failure analysis and advanced troubleshooting.</li> <li>Support development and implementation of surveillance and administration programs for critical Instrument and F&amp;G Systems of new projects to achieve high standards of Reliability, Availability and Cyber Security.</li> <li>Support the definition and implementation of integrity program for Instrument/F&amp;G to achieve high standards of safety, reliability and availability.</li> <li>Provide technical input related to area of expertise to other disciplines and functions as per requirements to support overall business objectives.</li> <li>Supervise the activities undertaken by contractors, consultants and service providers.</li> <li>Guide less experienced engineers in implementing the company integrity and reliability systems.</li> <li>Support and facilitate smooth completion of project tie-in requirements for all systems under the area of responsibility.</li> <li>Maintain Issue Register identifying and resolving critical issues including new technology risks (under area of responsibility) which could impact new project Reliability, Availability and Cyber Security.</li> <li>Support high risk commissioning activities for high complexities &amp; large-scale projects by (a) undertaking stringent system surveillance, (b) tuning and optimizing instrument and F&amp;G systems, and (c) providing advisory support to Operations and Maintenance.</li> </ul><br><ul> <li>Bachelor's Degree in Engineering.</li> <li>6 years' experience in an oil and gas environment.</li> <li>Demonstrate good working knowledge of DCS, PLCs, ESD/F&amp;G Systems, Anti Surge Control Systems, Metering Systems, and Turbine/Compressor Control Systems and full knowledge of SIL requirement.</li> <li>Able to work and make decisions under highly stressing conditions.</li> <li>Fluent in written and spoken English.</li> <li>Strong leadership &amp; people skills.</li> <li>Computer skills (Microsoft Office, SAP, CONVAL, InstruCal).</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in USD Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>10 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>RESPONSIBILITIES: Implement career development programs such as the high potential and summer internship programs under the guidance of the Head of Career Development Qatar in order to ensure the continuous development of Dolphin Energy’s national talent. Participate in the implementation and maintenance of Dolphin Energy’s job ladders and career paths ensuring it is properly communicated and explained. Assist employees in development and determine the proper type of plan: IDP, CEP, ODP, PIP in conjunction with the HR Strategic Partner based on their development needs, available training programs, and function requirements in order to ensure alignment with business needs and the development of national talent. Monitor employee progress against developed personal development plans in conjunction with HR Business Partners through periodic meetings providing counseling and recommending future actions to ensure attainment of career development objectives. Report to the Head of Career Development Qatar on the development progress of national talent and identify potential opportunities for further career development through ensuring competency gaps are closed in a structured manner via a range of appropriate methods. Liaise with HR Business Partners in order to provide information and assistance about career development programs within Dolphin Energy. Maintain the development database outlining the current development plan progress and maintain proper records and reports in order to keep various stakeholders continuously appraised of the career development activity details. Review periodically the effectiveness of the career development program and suggest measures for improvement. Support the Head of Career Development Qatar in the development of a Career Development Manual for the division clearly outlining the set processes and procedures. Schedule milestone presentations to senior management in order to ensure relevant data and information are communicated to ease decision making. Participate and assist in the succession planning campaigns providing the Head of Career Development Qatar with the required support to ensure ease of implementation. QUALIFICATIONS &amp; EXPERIENCE Minimum Educational Requirements / Qualifications: Bachelor’s Degree in Human Resources or a related area from a recognized university. Minimum Experience: 5 years relevant experience in human resources. Experience with Succession Planning, Career Path and Development Preferably Speaks Arabic Skills and Competencies: Excellent PC skills, especially excel, word and PowerPoint. Good counseling skills Excellent written and oral communication in English. Effective interpersonal, verbal and written communication skills. Good analytical skills. </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Administration, Human Business Partner </p><p></p></section>

Job Purpose Apply the acquired knowledge and experience in developing methods and processes to prevent, or reduce, the likelihood or frequency of failures in I&E systems and assets.<br>Accountabilities Day to Day Accountabilities: (for I&E Reliability Engineer with major Experience in Electrical) Advise and assist Maintenance I&E Engineers, electricians and production supervisors on complex electrical repairs and troubleshooting methodologies. Develop and implement Reliability strategies by utilizing conventional techniques such as Reliability Centered Maintenance (RCM), Root Cause Analysis (RCA), Preventive and Predictive maintenance (PPM) strategies, and other industry accepted reliability techniques to analyse Electrical equipment failures and produce cost effective strategies to ensure safe and reliable operation of the plant. Carry out detailed engineering calculations using ETAP (Load Flow, Short Circuit, Motor Starting, Protection Relays Selectivity and Coordination) and develop drawings including Single Line Diagrams, Schematic Diagrams, Cable Schedules, Interconnection drawings, electrical equipment data sheets etc. Implement Mechanical Integrity & Quality Assurance best practices. Work with other concerned departments to develop & execute appropriate Quality Assurance (QA) practices and develop a mechanism to assess the effectiveness of QA practices. Proactively identify Electrical Equipment Reliability Issues and develop engineering solutions for chronic and sporadic equipment reliability problems. Work with technical, production and maintenance departments to implement solutions. Lead Reliability Improvement efforts of the plant from the platform of Reliability Improvement Teams(RITs). Perform Root Cause Failure Analysis to identify various failure modes and recommend strategies to help improve I&E equipment reliability. Evaluate RCA reports, criticality studies, equipment strategies, and risk assessments on equipment to ensure consistency and compliance with company procedures and policies. Evaluate facility incidents that affect reliability and ensure that appropriate RCAs are performed. Assist in tracking RCA findings and completing action items in a timely manner. Reviews equipment specs/designs to ensure equipment can meet reliability objectives. Participate as a technical adviser on capital projects and turnarounds. Participates in the MOCs and PSSRs of new installations to assure adherence to functional specifications. Act as subject matter expert (SME) in performing root cause analysis (RCA) investigations and provides expertise to the RCA teams as required. Review and optimize ITPMs for functionally critical Electrical power distribution equipment. Drive consistency in Electrical equipment design across the site as part of projects review including consistency in maintenance strategies. Provide input as needed on projects to ensure design and reliability issues are considered and addressed on new projects. Provide guidelines to Maintenance in order to ensure that Life Cycle Asset Management processes are complied with throughout the entire life cycle of new and old assets. Champion continuous improvement, fosters relationships between various plant functions to focus on total quality. Monitor, review and analyse MOCs carried out on IPS equipment ensuring proper Modification & Decommissioning requirements are followed as per standard and potential impact to IPS integrity reviewed. Support the Obsolescence Management Program pertaining to IPS equipment. Ensure compliance to Chevron Project Engineering Standards for all changes pertaining to IPS Equipment Ensure Compliance to Qatar Energy Measurement Guidelines Streamline the FSA (Functional Safety Assessment) requirements at the various stages of the SIS Lifecycle Reviews equipment specs/designs to ensure equipment can meet reliability objectives. Participate as a technical adviser on capital projects and turnarounds. Participates in the MOCs and PSSRs of new installations to assure adherence to functional specifications. Act as subject matter expert (SME) in performing root cause analysis (RCA) investigations and provides expertise to the RCA teams as required. Review and optimize ITPMs for plant safety critical ‘Instrumented Protective Systems’(IPS) Provide input as needed on projects to ensure design and reliability issues are considered and addressed on new projects. Provide guidelines to Maintenance in order to ensure that Life Cycle Asset Management processes are complied with throughout the entire life cycle of new and old assets. Champion continuous improvement, fosters relationships between various plant functions to focus on total quality. Policies, Systems, Processes and Procedures Contribute to the identification of opportunities for the continuous improvement of departmental systems, policies, processes and practices taking into account ‘international leading practices’ in order to improve productivity and operational efficiency. Provide critical input to support the development of I&E Reliability Section’s systems, policies, processes, and procedures in order to meet business requirements. Ensure team members comply with all I&E Reliability Section’s policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner. Quality, Health, Security, Safety and Environment Ensure compliance with Life Critical Procedures, Tenets of Operations, Consent to Operate, plant policies and procedures, Daily Operating Instructions, Standard Operating Procedures (SOPs), Job Safety Analyses (JSAs), MOC Process, and Quality Management System. Participate in the safety activities of the shift to ensure regulatory, health, safety, security, environmental, and quality compliance. Carry out plant walk-downs and audits to ensure work is being performed safely and that the plant safety systems are enabled. Coordinate efforts to correct discrepancies. Actively participate in shift toolbox meetings, JSAs, MSCM’s, etc. Execute Stop Work Authority and take immediate corrective actions to stop unsafe behaviours. Reporting Prepare relevant reports in a timely and accurate manner to meet the departmental requirements, policies and standards. Support supervisor in the preparation of the annual operating and capital budgets. Ensures reliability projects and activities are completed on time and within budget. Report incidents and near misses and participate in investigations as required. Communicate to Supervisor to inform on issues that require additional follow up. Communicate ideas, present, and explain technical knowledge to stakeholders. Qatarization Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.<br>Qualifications & Experience Education Required: BSc in Engineering Tech. / Electrical / Electrical Power Preferred: Master’s in Engineering<br>Experience Required: 5-7 years in Electrical equipment, systems maintenance & technical support preferably in a process industry, <4 years at a similar position Preferred: Experience in Oil & Gas / Petrochemicals Industry<br>Other Job Specific Requirements and/or Vocational Accreditations Well conversant with protection/control systems of large process plant - High/Medium Volt (132/33/6k V). Solid understanding of electrical protection system design and intelligent protection relays operation. Experience in failure mode/effect analysis & good understanding of failure mechanisms of Electrical equipment. Troubleshooting techniques and ability to analyze & resolve engineering problems independently. Knowledge of relevant IEC and IEEE Standards and or other well recognized standards. Familiarity with ETAP and similar system modelling & analyzing tools would be an additional advantage. Relevant experience in load flow & short circuit studies, Relay discrimination & coordination studies for an industrial electrical distribution system. Familiarity with CMMS preferably SAP.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Lead the implementation of a robust and effective marine safety and quality assurance and compliance process for Compression projects offshore marine spread operating within defined project groups in accordance with LNG Marine Operations Procedures and collaboration with Compression PMTs, OPCO Marine and third-party MWS.</li> </ul><br><ul> <li>Responsible for marine safety, quality assurance and compliance for Compression projects marine scope in accordance with the LNG Marine Operations Procedures and further revisions, international regulations and standards, classification society, flag state, local regulations. Consistently guide and coordinate the work of the project marine leads and coordinators assigned to the individual Compression projects.</li> <li>Compression projects focal point and custodian of the marine safety and quality assurance activities for all marine units engaged on the projects and manages marine assurance processes across Compression projects including vessel suitability assessments, marine assurance inspections and audits (e.g. OVID), marine warranty surveys, DP assurance.</li> <li>Ensure that Contractor personnel and Company Teams are qualified, trained and with suitable level of experience and expertise with respect to marine activities.</li> <li>Managing active interfaces and engagements with OPCO Marine, and Compression PMTs to ensure the marine scope is executed consistently, effectively and efficiently to achieve project objectives.</li> <li>Establish effective communication and strategic connection among critical project stakeholders including Marine Contractors to identify and implement solutions in a timely manner.</li> <li>Facilitate and support resolution-oriented communication among marine stakeholders and Marine Contractors, vessels owners, contractors and third parties.</li> <li>Implement and maintain an efficient Marine Incident Reporting System, support root causes analysis and corrective action identification and implementation, lead critical marine incident investigations (as marine SME), attend offshore survey/inspections and marine audits as needed.</li> <li>Implement and execute an effective lesson learned process of identifying, capturing process and timely sharing mechanism among key marine stakeholders for high value learnings.</li> <li>Providing focus and support to emergent/ unplanned situations such as breakdowns and incidents that demand immediate priority without compromise to ongoing activity.</li> <li>Strong commitment to Safety Leadership supported by extensive knowledge of safety protocols and best practices in the Maritime Industry.</li> <li>Participate in risks screening and assessment and ensure all mitigations measures are safely and timely implemented.</li> <li>Support Shared Resources and PMT T&amp;I teams to review and validate technical and execution deliverables associated with T&amp;I scope execution (as appropriate).</li> <li>Coordinate with MWS and contractor's marine team with regards to the marine assurance scope, including vessels suitability surveys (VSS) and DP audits.</li> <li>Ensure the findings are closeout to meeting the project marine compliance requirements and maintain the vessels inspections and audits database for PMT and T&amp;I team's reference.</li> </ul><br><ul> <li>Bachelor's degree in sciences, marine disciplines, or engineering or Marine First-Class Certificate of Competency</li> <li>10 years seagoing experience as a shipboard engineer or sea officer, including 2 years as Chief Engineer or Master</li> <li>Experienced in handling/managing offshore marine units operating in the oil and gas industry.</li> <li>Broad and extensive knowledge of critical marine operations including offshore installation and construction vessels and barges, heavy lifts, transportation, pipe and cable lay, jack-up accommodation barges, dive support vessels.</li> <li>Knowledge of Dynamic Positioning Systems &amp; Operations, DP FMEA Analysis, DP FMEA Proving Trials, Annual DP Trials, ASOG/CAM.</li> <li>Experienced in managing marine safety and quality assurance &amp; compliance processes, following corporate requirements and international standards.</li> <li>High knowledgeable in International Maritime Regulations, Codes and Standards.</li> <li>Experience within the Middle East region is advantageous.</li> <li>Previous Marine Warranty Surveyor (MWS) and Marine Consultancy experience is advantageous.</li> <li>International Marine Contractors Association (IMCA) accreditation &amp; certification is preferred.</li> <li>Local and international maritime regulations (e.g., IMO, SOLAS, MARPOL, ISM Code).</li> <li>Ability to work on or be based on a platform or vessel.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in USD Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>10 Hours / 6 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>36 Months, with possible extension</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br><p><u>Role Summary:</u></p><p>The role holder is responsible for managing the projects department and for the overall direction, development, coordination, implementation, execution, control, completion, handover, and close-out of projects ensuring consistency with Company strategy, commitments, and goals. Ensuring this opportunity are executed as greenfield and brownfield projects within existing QAFCO facilities, Shutdown and non-shutdown. The role holder leads multi-disciplined teams of head of sections, engineers that will manage a balanced project department projects portfolio on short and long term according to the company’s requirements and plans. Oversees the contracting, engineering, procurement, construction, commissioning and handover until close-out of the project’s safety within agreed cost and schedule while meeting quality, project objectives and business controls following QAFCO project management systems. The role is heavily oriented towards providing direction to technical problem solving, decision-making, analysis of project department portfolio through the application of analytical and innovative techniques. The role holder reports to the Chief Technical Officer.</p><br><p><u>Key Accountabilities:</u></p><ul><li><p>Act as the owner/custodian of the QAFCO’s project management methodology and coordinate, tracks for continuous improvements, integrity of system, compliance, training, sustainability.</p></li><li><p>Plan, direct, lead and organise the activities of the projects department to ensure that budgets and R&amp;A plans are met through the optimisation and efficient utilisation of available manpower and working hours and that staff are motivated to realise potential and make significant contributions.</p></li><li><p>Direct and manage the activities of Head of Sections, Project Engineers, Project Support in the planning, scheduling, design quality and execution of projects.</p></li><li><p>Support the Sr. Management with the execution of all aspects of the project including managing the staff, providing vision and strategic leadership, providing, and contributing to the 5-years capital plan, monitoring and control of project schedules and budgets, evaluating project productivity and quality and directing the complete technical operations of the project. </p></li><li><p>Providing recurrent projects executive summary reporting. Monitor project’s balance score cards to meet objectives and expectations. </p></li><li><p>Participate on the performance management meetings. Review, develop and recommend the appropriate organization structure for the department that will be utilise human capital on the current and forecasted workload to meet the business objectives.</p></li><li><p>Ensure that the relevant disciplines / trades follow valid standards, technical requirements, and good engineering practices to ensure that projects are executed in line with agreed specifications.</p></li><li><p>Approve and maintain modern and good standards on engineering practices in the department. Ensure that the MOC process is followed into the projects, prior to changes taking place. This as part of the governance.</p></li><li><p>Ensure RCA on projects is implemented for positive and gaps and to capture as lessons learnt projects life cycle, and their implementation in future projects.</p></li><li><p>Develop QAFCO’s project management methodology, tools, templates, forms, procedures &amp; guidelines to ensure consistent evaluation and implementation of projects.</p></li><li><p>Actively contribute to balance the project portfolio on short- and long-term regarding contribution to profitability, safety, health, environment, and product quality, according to QAFCO’s goals and objectives.</p></li><li><p>Liaise closely with other departments/sections within QAFCO concerning project planning and execution.</p></li><li><p>Monitor and approve project planning and strategy baselines and updates/changes prior to approach respective committees related.</p></li><li><p>Ensure proper interfacing during entire project life cycle with application of the QAFCO’s project management methodology.</p></li><li><p>Guide and provide direction for potential problem areas, technical information, staffing priorities and identify solutions where necessary.</p></li><li><p>Lead by example, as a role model with innovation and differentiation, sharing and developing knowledge, competencies, serving as coach and mentors to all projects department members, and functions supporting on project</p></li><li><p>Responsible to maintain proper staffing levels to meet project requirements. Innovate spirit in the department, motivate, develop, and appraise performance of employees under area of responsibility to achieve improved performance and individual contribution.</p></li><li><p>Plan and participate in the development of nationals for their learning and growing career.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in relevant Engineering discipline. </p></li><li><p>15 years direct and relevant experience in oil/gas or petrochemical industry with minimum 5 years in a project management role. </p></li><li><p>Fully conversant and knowledge as Subject Matter expert in project management and project engineering and construction management will be added as an advantage. </p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Field Operator - ( 2 ) Position: Field Operator - (2) Date Open: Feb 19, 2026 Closing Date: Jun 30, 2026 Principal: Qatar District Cooling Company Country: Doha, Qatar Qualifications: Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position Additional Qualifications:</p><p>Safety Observation<br>Raise SO in CMMS when found during shift.</p><p>Security Rounds:<br>Conduct regular security rounds of the plant, checking for unauthorized personnel or security breaches (this is part of normal structured round check).</p><p>Safety Check:<br>Conduct a thorough safety inspection of the assigned area, including equipment, PPE, and emergency exits.<br>Ensure all safety signage is visible and up-to-date.</p><p>Emergency Response<br>Respond to emergencies, such as equipment failures, fires, or spills.</p><p>PTW System<br>Issuing, reviewing, or verifying the Permit-to-Work (PTW) system for maintenance and operational activities.</p><p>Equipment Line Up / LOTO<br>Perform LOTO, changeover or shutdown equipment. Isolate equipment for handover to maintenance.</p><p>Equipment Inspection:<br>Visually inspect critical equipment (pumps, valves, chillers, etc.) for any signs of damage, leaks, or abnormal operation.<br>Check lubrication levels and perform routine lubrication as needed.</p><p>Parameter Monitoring:<br>Monitor key process parameters (pressure, temperature, flow rate, etc.)</p><p>System Startup:<br>Initiate the startup procedure for assigned systems, following established checklists and procedures.</p><p>System Shutdown:<br>If required, initiate the shutdown procedure for assigned systems, following established checklists and procedures.</p><p>Alarm &amp; Event (A&amp;E) Analysis<br>Refer to alarm screen at the equipment panel. Monitor and raise info to CCC Operators for any anomalies.</p><p>Shift Handover:<br>Prepare a detailed shift handover report, including any ongoing issues, maintenance requirements, and abnormal events.<br>Conduct a handover "shake-hand" handover meeting to ensure proper baton passing.</p><p>Plant Optimization<br>Work on optimizing plant performance by analyzing system data and making minor adjustments to improve efficiency or reduce energy consumption. Coordination with CCC Operators.</p><p>Troubleshooting and Maintenance:<br>Respond to any alarms or alerts and take necessary corrective actions.<br>Perform scheduled maintenance tasks, such as cleaning filters, replacing gaskets, or tightening bolts.<br>Identify and troubleshoot minor equipment issues, such as valve leaks or pump vibrations.</p><p>Defect Management<br>Raise SR (or relay the info to CCC Operator in charge) in CMMS according to the right priority.</p><p>Monitoring of Chemical Treatment Systems<br>Ensure that the water treatment system is operating correctly, monitoring chemical levels, and ensuring that water quality parameters are within specified limits.</p><p>Others and Extras<br>Provide information and update from the field to CCC Operator to maintain accurate and up-to-date records in the Daily Operation Report (DOR).<br>Occasionally attend site visits by visitors or contractors.<br>Perform any other duty as assigned by the Plant Operations Supervisor<br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must have at least Vocational Diploma / Short Course Certificate The job requires Male applicants. Minimum of 5 years working experience is required for this position</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Primary Purpose of the Job</strong><br><p>Responsible to plan, coordinate, supervise logging operations both open and cased hole logs for QatarEnergy operated offshore Idd El-Shargi field. Produce cost effective and comprehensive data acquisition plan for on-going drilling, workover operation as well as reservoir surveillance rigless activities. Provide quick petrophysical analysis for appropriate completion strategy during drilling operation and generate post-operation detail petrophysical interpretation and report to reservoir management team. Update and support Idd El-Shargi Studies team regularly and as required. Provide petrophysical input into integrated reservoir/field development studies for subsurface model building and updating. Ensure timely high data quality delivery from service providers for corporate archive. Being an active and highly supportive member of interdisciplinary reservoir management team.</p><br> <br><strong>Required Experience and Skills</strong><br><p><strong><u><span>Experience &amp; Skills</span></u></strong></p><br><ul><li><span>Minimum 10 years of work experience in the oil and gas industry with 6 years' experience doing a combination of petrophysical studies and operations. Experience with a focus on acquiring, evaluating, and interpreting petrophysical data. This includes advanced logging techniques and the ability to define hydrocarbon contacts and assess reservoir potential accurately. </span></li><li><span>Must have a thorough understanding of open hole (both wireline and MWD/LWD), cased hole and production logging tools. Must be able to evaluate and interpret image logs. </span></li><li><span>Enhance reservoir characterization through the integration of various data sets, including petrophysical, geological, and dynamic data to reduce uncertainties in reservoir simulations. </span></li><li><span>Strong competency in quality control of petrophysical data, ensuring reliability and accuracy in routine and complex log analysis. </span></li><li><span>Experience in deploying new petrophysical technologies and methodologies to optimize field development and asset value. </span></li><li><span>Strong teamwork skills. Experience working in a multicultural environment. </span></li><li><span>Effectively communicate with peers, less experienced staff, field staff, and management. </span></li></ul><p><strong><u><span>Desirable</span></u></strong></p><br><ul><li><span>Ability to guide and improve the processes related to petrophysical data acquisition and interpretation, ensuring the application of industry best practices and the incorporation of innovative approaches to subsurface characterization. </span></li><li><span>Experience of CCAL and SCAL evaluation techniques </span></li><li><span>Experience working in integrated asset team environment. </span></li><li><span>Knowledge of geostatistics and experience aiding geoscientists to build 3D geological and property models (deterministic and stochastic) </span></li><li><span>Experience of horizontal well technology and geo-steering. </span></li><li><span>Experience in carbonate reservoirs. </span></li><li><span>Experience in statistical and pattern recognition (Neural networks, fuzzy logic and multidimensional histograms) techniques </span></li></ul><p><strong><u><span>Software Knowledge Experience</span></u></strong></p><br><ul><li><span>IP / Techlog / Geolog </span></li><li><span>Petroworks – Openworks – Zmap+ </span></li><li><span>Petrel / RMS is added advantage </span></li><li><span>Emeraude Kappa </span></li></ul> <br><strong>Educational Qualifications</strong><br><p><span>Minimum of a BSc in Engineering/Geosciences/Applied Physics/Applied Electronics or equivalent </span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><ul><li>Inspect mechanical and piping works including fabrication, installation, and welding activities to ensure compliance with project specifications and quality standards<br></li><li>Review and witness ITPs, conduct visual and dimensional inspections, and raise NCRs for non-conforming works<br></li><li>Maintain QC documentation, inspection records, and reports throughout the project<br></li></ul><br><span>Requirements</span><ul><li>Minimum<b>5 years</b>experience as a QC Inspector in the<b>Oil &amp; Gas</b>industry<br></li><li>Hands-on experience in mechanical and piping inspection; relevant QC certifications are an advantage<br></li><li>Available to join<b>immediately</b>upon selection<br></li></ul><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide all aspects of Mechanical Engineering support (in the general areas of piping, pressure vessels, heat exchangers and packaged equipment) to contribute to the division strategy and goals which includes design reviews, commissioning, start-up, failure analysis, advanced troubleshooting and develop work packs to maintenance executed modifications.</p><p>Define and document best practices within the area of expertise and recommends performance improvement initiatives.</p><p>Provide technical input related to area of expertise to other disciplines and functions as per requirements to support overall business objectives. Identify plant problems concerning static equipment and piping and shall cover degradation/ failure and equipment malfunction.</p><p>Control and supervise the activities undertaken by contractors, consultants and service providers.</p><p>Guide less experienced engineers in implementing the company integrity and reliability systems.</p><p>Support and facilitate smooth completion of project tie-in requirements for all systems under the area of responsibility.</p><p>Maintain Issue Register identifying and resolving critical issues including new technology risks (under area of responsibility) which could impact new project Reliability and Availability.</p><p>Provide Management of Change related technical support to assigned Assets (Operations) and identifying timely solutions to ensure Asset Integrity and Reliability sustaining safe and continuous plant environment.</p><p>Active participation in Safety Workshops, Cold Eye Reviews and Value Improvement Workshops.</p><p>Steward and participate in Root Cause Failure Analysis (RCFA), scenario-based risk assessments (SBRAs), risk screening and Formal Risk Assessment (FRA).</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's Degree in Engineering.</p><p>6 years' experience in an oil and gas environment.</p><p>Attained Senior Engineer level of competencies as per Mechanical Technical Competencies.</p><p>Knowledge in performing design calculation / verifications with software such as PV Elite, CAESAR II, Nozzle Pro.</p><p>Ability to use good engineering sense combined with understanding of pressure vessel repair /alterations in compliance with NBIC.</p><p>Able to work and make decisions under highly stressing conditions.</p><p>Fluent in written and spoken English.</p><p>Strong leadership &amp; people skills.</p><p>Computer literacy involving the regular use of professional office and technical applications.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Organise, coordinate and control the execution of the Hook-up activities, both performed by subcontractors or in direct hiring, ensuring a proper coordination between disciplines supervisors and Hook-up engineering, overseeing the availability of project materials, equipment and tools, verifying that works are carried out in accordance with project documentation, schedule, safety and quality standards and procedures Represent Hook-up construction in daily meetings with Client TASKS Ensure that Hook-up activities are carried out as per time schedule and adhering to the time frame allocated to the specific work tasks Interface with Hook-up Planning and Control Analyst to share information regarding the pro gress of the work, highlighting possible cause of deviations between the program and the work carried out and to analyze the forecast for Client/Third parties inspections Interface with Hook-up Engineering to request instruction s to overcome possible problems/critical issues, propose alternative solutions and request preparation of technical queries Ensure the supervision and monitoring of the works performed, subcontracted or in direct hiring Coordinate Hook-up resources, indicating any needs or surplus In conjunction with commissioning superintendent, plan and monitor vendors or any specialists activities at site Manage the technical and administrative documentation Promote safe works practices and environmental protection, ensuring that safety standards are respected Ensure that an effective Permit to Work system is implemented and maintained for the safe execution of the activities supervised by discipline specialists Ensure the Hook-up Marine Spread management is performed according to hook-up execution needs, in a timely and effective manner At Yard: Cooperate with Hook-up team to give inputs and expertise into the preparation of project Job Card Ensure proper and time effective stocks of tools, equipment and consumables are arranged in line with project forecast workload Support Hook-up Manager into material management and carry over management during weekly meetings with fabrication department Provide inputs to the definition of the Hook-up works detailed planning</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education: Master's Degree/bachelor's degree Experience: 8 Years of experience in Offshore Construction as Hook Up Superintendent Languages: English Language skills required Technical Skills: senior level experience in offshore Hook-Up activities work</p><p></p></section>