Low Voltage Cable Jointer in Jordan

<p><h4>Essential responsibilities:</h4> <p>The designee is responsible for the overall daily safe and expeditious flow of air traffic within the designated facility control airspace in accordance with ICAO and FAA 7110.65 regulatory guidance. Rules of separation must be applied to achieve the required separation as outlined in FAA manuals and orders. This designee maintains situational awareness of the overall flow of air traffic operations at the facility assigned and is responsible for all ATC facility operations and services during their shift, as well as adherence to CRM principal application. The designee coordinates with various controllers and personnel to relay information which pertains to the aircraft and in the interest of safety of flight including emergency information. The individual is responsible for vehicles and personnel operating on the airfield. Along with controlling aircraft the designee must be able to process flight plans, and supervise approach, departure, and arrival procedures. The designee will have a full working knowledge of control tower operations and flight planning and a fundamental knowledge of radar/manual approach control operations.</p> <h4>Minimum position knowledge, skills, and abilities required:</h4> <ul> <li>Graduate of an approved DoD or FAA ATC course.</li> <li>Eight (8) years of experience, one (1) year of experience must be from performing in a like type facility.</li> <li>Knowledge of ATC rules, regulations, and techniques; control tower and approach control operations.</li> <li>Shall hold one of the following tower certifications: FAA Control Tower Operator (CTO) certificate, FAA or AOV Credential with Tower rating, or equivalent.</li> <li>Ability to obtain and maintain FAA Class II Medical Certificate.</li> <li>Ability to obtain and maintain a US CENTCOM Medical Exam.</li> <li>Must be able to obtain and maintain a Secret Security Clearance. Note: US citizenship is required to obtain a Secret Clearance.</li> </ul> <h4>Compensation details:</h4> <p>110,000</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions or benefits.</p> <h4>Original posting:</h4> <p>06/01/2026 - Until filled</p> <p>Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Essential responsibilities:</h4> <p>The designee is responsible for guiding and assisting the host nation in the overall safe and orderly flow of air traffic within their designated airspace. This designee maintains situational awareness of the overall flow of air traffic operations at the facility assigned and is responsible for all ATC facility operations and services during their shift. Rules of separation must be applied to achieve the required separation as outlined in FAA manuals and orders. The designee coordinates with various controllers and personnel to relay information which pertains to the aircraft and in the interest of safety of flight including emergency information. The designee will be familiar with radar or control tower operations and apply the required separation of aircraft. The individual is responsible for vehicles and personnel operating on the airfield when operating in a control tower environment.</p> <p>Along with controlling aircraft, the designee must be able to process flight plans and supervise approach, departure, and arrival procedures. The designee will have a full working knowledge of control tower operations and flight planning and a fundamental knowledge of radar/manual approach control operations when operating in a control tower. The designee will have a full working knowledge of radar/manual approach control operations and flight planning and a fundamental knowledge of control tower operations when operating from a radar facility.</p> <h4>Minimum position knowledge, skills, and abilities required:</h4> <ul> <li>Graduate of an approved DoD or FAA ATC course.</li> <li>Eight (8) years of experience; one (1) year of experience must be from performing in a like type facility.</li> <li>Knowledge of ATC rules, regulations, and techniques; control tower and approach control operations.</li> <li>Tower controllers shall hold one of the following tower certifications: FAA Control Tower Operator (CTO) certificate, FAA or AOV Credential with Tower rating, or equivalent.</li> <li>Radar controllers shall hold one of the following radar certifications: Air Traffic Control Specialist (ATCS) certificate, FAA or AOV Credential with Radar rating, FAA or DoD training records, or equivalent.</li> <li>Ability to obtain and maintain FAA Class II Medical Certificate.</li> <li>Ability to obtain and maintain a US CENTCOM Medical Exam.</li> <li>Must be able to obtain and maintain a Secret Security Clearance.</li> </ul></p><p></p>

<p><h4>Responsibilities:</h4> <p><strong>Lead electrical design</strong> from feasibility and basis of design (BoD) through detailed design, tender, and construction support for aviation facilities.</p> <p><strong>Own the electrical power strategy</strong> for large-scale facilities (e.g., hangar bays): MV/LV distribution, redundancy, load management, earthing, and control philosophies—balancing reliability, safety, and energy performance (IEC/NFPA context).</p> <p><strong>Engineer electrical systems</strong> for hazardous operations: paint booths/rooms, fuel-cell maintenance areas, welding zones—ensuring compliance with ATEX/IECEx and coordination with mechanical ventilation and controls.</p> <p><strong>Design and specify power systems</strong> for aviation facilities: transformers, generators, UPS, distribution boards, and backup systems for mission-critical operations.</p> <p><strong>Integrate electrical utilities</strong> across MRO and workshop environments—ground power units (GPU), PCA interfaces, process equipment loads, and coordination with mechanical, fire/life safety, and control systems.</p> <p><strong>Shape electrical systems</strong> for catering facilities: resilient power distribution for kitchens, cold-chain systems, and hygienic areas aligned with HACCP/ISO 22000 requirements.</p> <p><strong>Deliver BIM-led coordination</strong> (Revit/Navisworks) across architecture, structures, MEP, and specialist systems; lead clash resolution and model QA.</p> <p><strong>Perform calculations and studies:</strong> load estimation, cable sizing, protection coordination, short-circuit analysis, and lighting design.</p> <p><strong>Author technical documents:</strong> BoD, load schedules, single-line diagrams (SLDs), specifications, and commissioning plans.</p> <p><strong>Mentor and review engineers/designers;</strong> lead design reviews, HAZOPs, and constructability/operability workshops.</p> <p><strong>Engage stakeholders</strong>—airlines, MROs, airport operators, and authorities—to secure approvals and ensure smooth delivery.</p> <p><strong>Lead retrofit, refurbishment, and brownfield upgrades</strong> in operational airport environments—assessing existing systems, planning phased upgrades, and integrating new systems with minimal disruption while improving capacity, compliance, and energy performance.</p> <h4>Key systems & domains you’ll cover:</h4> <ul> <li>Hangars & workshops: MV/LV distribution, ground power units (GPU), PCA electrical interfaces, high-bay lighting, emergency power, earthing and bonding for aircraft safety, and hangar door electrics.</li> <li>Paint/corrosion control: hazardous-area electrical systems, explosion-proof equipment, interlocks, LEL monitoring interfaces, and ATEX/IECEx compliance coordinated with ventilation and controls.</li> <li>Welding & fabrication: power distribution for welding equipment, equipment earthing, task lighting, and integration with extraction/LEV systems aligned with OSHA/ACGIH guidance.</li> <li>Power systems: transformers, generators, UPS, LV panels, and distribution networks designed for redundancy, resilience, and mission-critical operations.</li> <li>Catering facilities: resilient power supply for kitchens, cold rooms/freezers, food processing areas, and hygienic zoning aligned with HACCP/ISO 22000 requirements.</li> <li>ELV & controls: fire alarm systems (NFPA 72), ICT, security (CCTV/access control), structured cabling, and BMS/SCADA integration for operational monitoring and control.</li> </ul> <h4>Qualifications:</h4> <ul> <li>Bachelor’s degree in electrical engineering; master’s degree preferred.</li> <li>Professionally registered (CEng, PE, or equivalent).</li> <li>15+ years' experience in electrical building services design, including aviation and complex infrastructure projects.</li> <li>Demonstrated experience leading multidisciplinary design teams and delivering major projects.</li> </ul> <h4>Technical expertise:</h4> <ul> <li>Strong knowledge of international electrical design codes, standards, and aviation requirements.</li> <li>Expertise in MV/LV power distribution, load assessments, protection systems, and earthing design.</li> <li>Proficiency in BIM and industry-standard design software, including Revit, Navisworks, ETAP, and Dialux.</li> <li>Experience in airport facilities, terminal buildings, and aviation-related infrastructure is highly desirable.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Job Role -Principal Engineer – Electrical (Aviation)&nbsp;<br>Verbal and written communication in English is mandatory<br>Responsibilities:</strong><ul><li>Lead electrical design from feasibility and Basis of Design (BoD) through detailed design, tender and construction support for aviation facilities.</li><li>Own the electrical power strategy for large-scale facilities (e.g., hangar bays): MV/LV distribution, redundancy, load management, earthing, and control philosophies—balancing reliability, safety, and energy performance (IEC/NFPA context).</li><li>Engineer electrical systems for hazardous operations: paint booths/rooms, fuel-cell maintenance areas, welding zones—ensuring compliance with ATEX/IECEx and coordination with mechanical ventilation and controls.</li><li>Design and specify power systems for aviation facilities: transformers, generators, UPS, distribution boards, and backup systems for mission-critical operations.</li><li>Integrate electrical utilities across MRO and workshop environments—ground power units (GPU), PCA interfaces, process equipment loads, and coordination with mechanical, fire/life safety, and control systems.</li><li>Shape electrical systems for catering facilities: resilient power distribution for kitchens, cold-chain systems, and hygienic areas aligned with HACCP/ISO 22000 requirements.</li><li>Deliver BIM-led coordination (Revit/Navisworks) across architecture, structures, MEP, and specialist systems; lead clash resolution and model QA.</li><li>Perform calculations and studies: load estimation, cable sizing, protection coordination, short-circuit analysis, and lighting design.</li><li>Author technical documents: BoD, load schedules, single-line diagrams (SLDs), specifications, and commissioning plans.</li><li>Mentor and review engineers/designers; lead design reviews, HAZOPs, and constructability/operability workshops.</li><li>Engage stakeholders—airlines, MROs, airport operators, and authorities—to secure approvals and ensure smooth delivery.</li><li>Lead retrofit, refurbishment, and brownfield upgrades in operational airport environments—assessing existing systems, planning phased upgrades, and integrating new systems with minimal disruption while improving capacity, compliance, and energy performance.</li></ul><strong>Key systems &amp; domains you’ll cover:</strong><ul><li>Hangars &amp; workshops: MV/LV distribution, ground power units (GPU), PCA electrical interfaces, high-bay lighting, emergency power, earthing and bonding for aircraft safety, and hangar door electrics.&nbsp;</li><li>Paint/corrosion control: hazardous-area electrical systems, explosion-proof equipment, interlocks, LEL monitoring interfaces, and ATEX/IECEx compliance coordinated with ventilation and controls.&nbsp;</li><li>Welding &amp; fabrication: power distribution for welding equipment, equipment earthing, task lighting, and integration with extraction/LEV systems aligned with OSHA/ACGIH guidance.&nbsp;</li><li>Power systems: transformers, generators, UPS, LV panels, and distribution networks designed for redundancy, resilience, and mission-critical operations.&nbsp;</li><li>Catering facilities: resilient power supply for kitchens, cold rooms/freezers, food processing areas, and hygienic zoning aligned with HACCP/ISO 22000 requirements.&nbsp;</li><li>ELV &amp; controls: fire alarm systems (NFPA 72), ICT, security (CCTV/access control), structured cabling, and BMS/SCADA integration for operational monitoring and control.</li></ul><br> <strong>Qualifications:</strong><ul><li>Bachelor’s degree in electrical engineering; Master's degree preferred.</li><li>Professionally registered (CEng, PE, or equivalent).</li><li>15+ years' experience in electrical building services design, including aviation and complex infrastructure projects.</li><li>Demonstrated experience leading multidisciplinary design teams and delivering major projects.</li></ul><strong>Technical Expertise:</strong><ul><li>Strong knowledge of international electrical design codes, standards, and aviation requirements.</li><li>Expertise in MV/LV power distribution, load assessments, protection systems, and earthing design.</li><li>Proficiency in BIM and industry-standard design software, including Revit, Navisworks, ETAP, and Dialux.</li><li>Experience in airport facilities, terminal buildings, and aviation-related infrastructure is highly desirable</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p><h4>Responsibilities:</h4> <p><strong>Lead electrical design</strong> from feasibility and basis of design (BoD) through detailed design, tender, and construction support for aviation facilities.</p> <p><strong>Own the electrical power strategy</strong> for large-scale facilities (e.g., hangar bays): MV/LV distribution, redundancy, load management, earthing, and control philosophies—balancing reliability, safety, and energy performance (IEC/NFPA context).</p> <p><strong>Engineer electrical systems</strong> for hazardous operations: paint booths/rooms, fuel-cell maintenance areas, welding zones—ensuring compliance with ATEX/IECEx and coordination with mechanical ventilation and controls.</p> <p><strong>Design and specify power systems</strong> for aviation facilities: transformers, generators, UPS, distribution boards, and backup systems for mission-critical operations.</p> <p><strong>Integrate electrical utilities</strong> across MRO and workshop environments—ground power units (GPU), PCA interfaces, process equipment loads, and coordination with mechanical, fire/life safety, and control systems.</p> <p><strong>Shape electrical systems</strong> for catering facilities: resilient power distribution for kitchens, cold-chain systems, and hygienic areas aligned with HACCP/ISO 22000 requirements.</p> <p><strong>Deliver BIM-led coordination</strong> (Revit/Navisworks) across architecture, structures, MEP, and specialist systems; lead clash resolution and model QA.</p> <p><strong>Perform calculations and studies:</strong> load estimation, cable sizing, protection coordination, short-circuit analysis, and lighting design.</p> <p><strong>Author technical documents:</strong> BoD, load schedules, single-line diagrams (SLDs), specifications, and commissioning plans.</p> <p><strong>Mentor and review engineers/designers;</strong> lead design reviews, HAZOPs, and constructability/operability workshops.</p> <p><strong>Engage stakeholders</strong>—airlines, MROs, airport operators, and authorities—to secure approvals and ensure smooth delivery.</p> <p><strong>Lead retrofit, refurbishment, and brownfield upgrades</strong> in operational airport environments—assessing existing systems, planning phased upgrades, and integrating new systems with minimal disruption while improving capacity, compliance, and energy performance.</p> <h4>Key systems & domains you’ll cover:</h4> <ul> <li>Hangars & workshops: MV/LV distribution, ground power units (GPU), PCA electrical interfaces, high-bay lighting, emergency power, earthing and bonding for aircraft safety, and hangar door electrics.</li> <li>Paint/corrosion control: hazardous-area electrical systems, explosion-proof equipment, interlocks, LEL monitoring interfaces, and ATEX/IECEx compliance coordinated with ventilation and controls.</li> <li>Welding & fabrication: power distribution for welding equipment, equipment earthing, task lighting, and integration with extraction/LEV systems aligned with OSHA/ACGIH guidance.</li> <li>Power systems: transformers, generators, UPS, LV panels, and distribution networks designed for redundancy, resilience, and mission-critical operations.</li> <li>Catering facilities: resilient power supply for kitchens, cold rooms/freezers, food processing areas, and hygienic zoning aligned with HACCP/ISO 22000 requirements.</li> <li>ELV & controls: fire alarm systems (NFPA 72), ICT, security (CCTV/access control), structured cabling, and BMS/SCADA integration for operational monitoring and control.</li> </ul> <h4>Qualifications:</h4> <ul> <li>Bachelor’s degree in electrical engineering; master’s degree preferred.</li> <li>Professionally registered (CEng, PE, or equivalent).</li> <li>15+ years' experience in electrical building services design, including aviation and complex infrastructure projects.</li> <li>Demonstrated experience leading multidisciplinary design teams and delivering major projects.</li> </ul> <h4>Technical expertise:</h4> <ul> <li>Strong knowledge of international electrical design codes, standards, and aviation requirements.</li> <li>Expertise in MV/LV power distribution, load assessments, protection systems, and earthing design.</li> <li>Proficiency in BIM and industry-standard design software, including Revit, Navisworks, ETAP, and Dialux.</li> <li>Experience in airport facilities, terminal buildings, and aviation-related infrastructure is highly desirable.</li> </ul></p><p></p>

<p><br></p><p>As a Multi-disciplinary design Engineer, you will play a pivotal role in the detailed design of multi-disciplinary infrastructure works. Your responsibilities will include developing coordinated design deliverables across electrical, mechanical, instrumentation, and control systems for industrial projects. The role focuses on producing accurate, constructible, and fully coordinated designs, drawings and layouts in close collaboration with lead design engineers and other disciplines.</p><p>Project Context : Haskoning is engaged in multiple projects at the Arab Potash Corporation (APC), which involves critical infrastructure works in the Dead Sea Area. The design Engineer will be supporting the design team, coordinating with other disciplines, and ensuring consistency across all project phases.</p><p>Key Responsibilities</p><ul><li>Prepare multidisciplinary design deliverables in accordance with project specifications, applicable codes, and standards</li><li>Coordinate layouts and interfaces between electrical, mechanical, civil, structural, and process disciplines</li><li>Support constructability, safety, and maintainability through design</li><li>Ensure drawing quality, consistency, and adherence to project CAD/BIM standards</li><li>Participate in design reviews, model reviews, and coordination meetings</li></ul><p>Specific discipline requirements</p><p>Electrical Design</p><ul><li>Develop layouts for LV/MV systems, including:</li><li>Power distribution</li><li>MCCs, switchgear, transformers</li><li>Cable routing and containment (trays, ladders, conduits)</li><li>Earthing and lightning protection systems</li><li>Prepare single-line diagrams, load layouts, and equipment arrangement drawings</li><li>Coordinate electrical room layouts and access/clearance requirements</li></ul><p>Mechanical Design</p><ul><li>Prepare layouts for mechanical equipment such as:</li><li>Pumps, motors, compressors, valves</li><li>Skids, pipework, supports, and access platforms</li><li>Develop general arrangement (GA) drawings and mechanical layouts</li><li>Coordinate mechanical interfaces with electrical and instrumentation systems</li><li>Incorporate installation, maintenance, and lifting requirements into designs</li></ul><p>Instrumentation &amp; Control Design</p><ul><li>Develop instrumentation layouts, including:</li><li>Field instruments, panels, and junction boxes</li><li>Instrument tubing and impulse lines</li><li>Analyzer shelters and instrument air systems</li><li>Prepare cable and tubing routing layouts</li><li>Assist with I/O layouts, control panel arrangements, and interface diagrams</li><li>Coordinate with control systems engineers for PLC/SCADA-related layouts</li></ul><p>Coordination &amp; Documentation</p><ul><li>Ensure clash-free and coordinated designs across all EMI&amp;C discipline</li><li>Support preparation of:</li><li>Layout drawings</li><li>Section details</li><li>Typical installation details</li><li>Incorporate comments from engineering reviews, HAZOPs, and constructability reviews</li><li>Assist in preparation of as-built drawings</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in Electrical, Mechanical, Instrumentation Engineering, or related technical discipline, Master degree is preferred</p><p>Minimum 10 years of experience in industrial or infrastructure projects</p><p>Proven experience working on multidisciplinary EMI&amp;C designs</p><p>Experience in EPC or consultant environments is an advantage</p><p>Attention to detail and ability to manage multiple tasks</p><p>Excellent skills with MS Office suite</p><p>Good communication skills and a collaborative approach to working with multidisciplinary and cultural teams</p><p>Professionally skilled in english</p><p>Familiarity with international standards (e.g., BS, DIN, ASTM, IEEE, IEC, API, ISO)</p><p>Start Date: as soon as possible</p><p>Location Requirement: You must be currently based in Jordan or the surrounding Dead Sea region. Due to project requirements, candidates must be available to work on-site and align with the local working schedule and time zone.</p>

<p>Join Haskoning and contribute to transformative engineering initiatives that support sustainable development across the globe. With over 140 years of experience and a presence in more than 20 countries, we offer a dynamic environment where innovation, collaboration, and professional growth are central to our mission.</p><p>As a Multi-disciplinary design Engineer, you will play a pivotal role in the detailed design of multi-disciplinary infrastructure works. Your responsibilities will include developing coordinated design deliverables across electrical, mechanical, instrumentation, and control systems for industrial projects. The role focuses on producing accurate, constructible, and fully coordinated designs, drawings and layouts in close collaboration with lead design engineers and other disciplines.</p><p>Project Context : Haskoning is engaged in multiple projects at the Arab Potash Corporation (APC), which involves critical infrastructure works in the Dead Sea Area. The design Engineer will be supporting the design team, coordinating with other disciplines, and ensuring consistency across all project phases.</p><p><b><br></b></p><p><b>Key Responsibilities</b></p><ul><li>Prepare multidisciplinary design deliverables in accordance with project specifications, applicable codes, and standards</li><li>Coordinate layouts and interfaces between electrical, mechanical, civil, structural, and process disciplines</li><li>Support constructability, safety, and maintainability through design</li><li>Ensure drawing quality, consistency, and adherence to project CAD/BIM standards</li><li>Participate in design reviews, model reviews, and coordination meetings</li></ul><p>Specific discipline requirements</p><p>Electrical Design</p><ul><li>Develop layouts for LV/MV systems, including:</li><li>Power distribution</li><li>MCCs, switchgear, transformers</li><li>Cable routing and containment (trays, ladders, conduits)</li><li>Earthing and lightning protection systems</li><li>Prepare single-line diagrams, load layouts, and equipment arrangement drawings</li><li>Coordinate electrical room layouts and access/clearance requirements</li></ul><p>Mechanical Design</p><ul><li>Prepare layouts for mechanical equipment such as:</li><li>Pumps, motors, compressors, valves</li><li>Skids, pipework, supports, and access platforms</li><li>Develop general arrangement (GA) drawings and mechanical layouts</li><li>Coordinate mechanical interfaces with electrical and instrumentation systems</li><li>Incorporate installation, maintenance, and lifting requirements into designs</li></ul><p>Instrumentation &amp; Control Design</p><ul><li>Develop instrumentation layouts, including:</li><li>Field instruments, panels, and junction boxes</li><li>Instrument tubing and impulse lines</li><li>Analyzer shelters and instrument air systems</li><li>Prepare cable and tubing routing layouts</li><li>Assist with I/O layouts, control panel arrangements, and interface diagrams</li><li>Coordinate with control systems engineers for PLC/SCADA-related layouts</li></ul><p>Coordination &amp; Documentation</p><ul><li>Ensure clash-free and coordinated designs across all EMI&amp;C discipline</li><li>Support preparation of:</li><li>Layout drawings</li><li>Section details</li><li>Typical installation details</li><li>Incorporate comments from engineering reviews, HAZOPs, and constructability reviews</li><li>Assist in preparation of as-built drawings</li></ul><p>Working Hours: Six days per week (Friday off), with compensation aligned to workload and responsibilities.</p><p>Where you will work</p><p>We are an international organisation that makes a positive impact in our world by crafting top-notch solutions. Backed by the expertise of over 6,000 colleagues working from offices in more than 20 countries, and with more than 140 years of experience, we help clients with challenges ranging from climate change and digital transformation to changing customer demands and the energy transition.</p><p><strong>Desired Candidate Profile</strong></p>Bachelor s degree in Electrical, Mechanical, Instrumentation Engineering, or related technical discipline, Master degree is preferred Minimum 10 years of experience in industrial or infrastructure projects Proven experience working on multidisciplinary EMI&amp;C designs Experience in EPC or consultant environments is an advantage Attention to detail and ability to manage multiple tasks Excellent skills with MS Office suite Good communication skills and a collaborative approach to working with multidisciplinary and cultural teams Professionally skilled in english Familiarity with international standards (e.g., BS, DIN, ASTM, IEEE, IEC, API, ISO) Start Date: as soon as possible You must be currently based in Jordan or the surrounding Dead Sea region. Due to project requirements, candidates must be available to work on-site and align with the local working schedule and time zone.

<p>Overview: Title: SATCOM Operation &amp; Maintenance (O&amp;M) Support Security Clearance: Secret Location: Amman, Jordan (Due to the nature of the work and contract requirements, U.S. Citizenship is required. ) Description: C3EL is seeking a cleared and experienced professional to join our team in Jordan. The SATCOM O&amp;M Support position will support the day-to-day maintenance and operation of assigned terminals. Responsibilities will include, but not be limited to:</p><ul><li>Knowledge of tactical and commercial satellite communication equipment.</li><li>Proficient in operating Satellite Modems, Redundancy Switches, associated cables, and interconnects; Up Converters, Down Converters, High Power Amplifiers (HPAs), Low Noise Amplifiers (LNAs), Low Noise Block (LNB); Waveguide (rigid, flex, and elliptical) joints and connections; Intermediate Frequency (IF) cables and connections; Antennas, Antenna motors, Solid State Power Amplifiers (SSPA), Antenna Control Units (ACU), and related cabling and interconnects; Heating, Ventilation, and Air Conditioning (HVAC) units; Uninterruptible Power Supplies (UPS); and Generators (if applicable).</li><li>Skilled in technical documentation for SAR, GAR, TSR, and ASI requests.</li><li>Experienced in using Test Measurement and Diagnostic Equipment (TMDE) such as power meters, spectrum analyzers, Firebird testers, volt meters, and similar tools.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Active, in-scope Secret clearance.</li><li>U.S. citizenship.</li><li>Minimum of two (2) years of experience supporting installation, repair, troubleshooting, or maintenance of satellite communications electronic systems or equipment.</li><li>Minimum of two (2) years of experience operating in a tactical satellite environment, including operation and maintenance of antenna controllers, SSPA, LNA/LNB, up/down converters, fiber optic, coax, Ethernet cables, FDMA and TDMA modems, and Modem Hub operations.</li><li>Experience and proficiency with commercial and military satellite TDMA/FDMA modems required.</li><li>Candidates must meet applicable DCWF DoD 8140 requirements for the assigned work role (411-Technical Support Specialist, Basic) through approved certifications, or education, or military training, or a combination thereof. Qualifying 8140 certifications may include A+, CND, Network+, Security+, or other DoD 8140-approved higher-level certifications aligned to the assigned work role.</li><li>Able to travel to support mission up to 10%.</li><li>Must possess a valid U.S. passport.</li></ul>

<p><h4>Job description</h4> <p><strong>Job role - Principal Engineer – Electrical – Metro Stations</strong><br> Verbal and written communication in English is mandatory.</p> <h4>Responsibilities:</h4> <ul> <li>Lead multi-disciplinary station electrical design: LV/MV building distribution, protection/coordination, earthing & bonding, lightning protection, standby generators & UPS, lighting & controls, across underground, at-grade, and elevated stations.</li> <li>Own the full design lifecycle: requirements capture, basis-of-design, load studies, selectivity/arc-flash reviews, single-lines, schematics, cable schedules, layouts, specs/BOQs, and employer’s requirements. Provide construction support as needed.</li> <li>Apply rail-specific life-safety standards in stations: e.g., NFPA 130 for fixed guideway transit (egress, fire protection, emergency ventilation & control/communications); coordinate with fire/life-safety, ventilation and architectural teams.</li> <li>Design compliant emergency lighting to EN 1838/BS 5266 (escape route, open-area, high-risk task) and produce photometric calculations & layouts (Dialux/Relux).</li> <li>Engineer EMC & earthing interfaces to EN 50121 (railway EMC) and EN 50122-1 (earthing/bonding for fixed installations) and manage interfaces with signaling/telecom/PSD.</li> <li>Coordinate digitally in BIM (Revit/Navisworks) with architecture, structural and MEP; run design reviews, clash prevention and interface matrices.</li> <li>Lead authority approvals (Saudi & UAE Civil Defence and utilities), support client/stakeholder workshops, value engineering and risk registers.</li> <li>Mentor and manage a team of designers; review deliverables, uphold QA/QC; contribute to proposal writing and level-of-effort estimates.</li> </ul> <h4>Qualifications:</h4> <ul> <li>Bachelor’s or Master’s degree in Electrical Engineering.</li> <li>Professional registration (e.g., CEng/PE) strongly preferred.</li> <li>12–18+ years in building/station electrical design with major rail/metro station projects; GCC experience strongly preferred.</li> <li>Strong grasp of NFPA 130, EN 1838/BS 5266 (emergency lighting), EN 50121/EN 50122 (EMC/earthing), BS 7671/IET Wiring Regs or NEC, and typical rail authority requirements.</li> <li>Fluency with ETAP/Amtech, Dialux/Relux, AutoCAD/Revit, and BIM coordination; familiarity with SCADA/BMS interfaces for station systems.</li> <li>Excellent interface management, stakeholder communication and team leadership skills.</li> </ul> <h4>Nice to have:</h4> <ul> <li>Experience integrating station electrical design with PSD, tunnel ventilation controls, SCS/OCS interfaces, and evacuation strategies per NFPA 130.</li> <li>Past authority liaison in KSA (RCRC/SDAIA utilities/Civil Defense).</li> <li>RAMS exposure (EN 50126/8/9) and cyber/physical security considerations for stations.</li> </ul> <p>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Job description<br><strong>Job Role -Principal Engineer – Electrical – Metro Stations<br>Verbal and written communication in English is mandatory</strong><br>Responsibilities:</strong><ul><li>Lead multi-disciplinary station electrical design: LV/MV building distribution, protection/coordination, earthing &amp; bonding, lightning protection, standby generators &amp; UPS, lighting &amp; controls, across underground, at-grade, and elevated stations.</li><li>Own the full design lifecycle: requirements capture, basis-of-design, load studies, selectivity/arc-flash reviews, single-lines, schematics, cable schedules, layouts, specs/BOQs, and employer’s requirements. Provide construction support as needed.</li><li>Apply rail-specific life-safety standards in stations: e.g., NFPA 130 for fixed guideway transit (egress, fire protection, emergency ventilation &amp; control/communications); coordinate with fire/life-safety, ventilation and architectural teams.</li><li>Design compliant emergency lighting to EN 1838/BS 5266 (escape route, open-area, high-risk task) and produce photometric calculations &amp; layouts (Dialux/Relux).</li><li>Engineer EMC &amp; earthing interfaces to EN 50121 (railway EMC) and EN 50122-1 (earthing/bonding for fixed installations) and manage interfaces with signaling/telecom/PSD.</li><li>Coordinate digitally in BIM (Revit/ Navisworks) with architecture, structural and MEP; run design reviews, clash prevention and interface matrices.</li><li>Lead authority approvals (Saudi &amp; UAE Civil Defence and utilities), support client/stakeholder workshops, value engineering and risk registers.</li><li>Mentor and manage a team of designers; review deliverables, uphold QA/QC; contribute to proposal writing and level-of-effort estimates.<br> <br> &nbsp;</li></ul><strong>Qualifications:</strong><ul><li>Bachelor’s or Master’s degree in Electrical Engineering.</li><li>Professional registration (e.g., CEng/PE) strongly preferred.</li><li>12–18+ years in building/station electrical design with major rail/metro station projects; GCC experience strongly preferred.</li><li>Strong grasp of NFPA 130, EN 1838/BS 5266 (emergency lighting), EN 50121/EN 50122 (EMC/earthing), BS 7671/IET Wiring Regs or NEC, and typical rail authority requirements.</li><li>Fluency with ETAP/Amtech, Dialux/Relux, AutoCAD/Revit, and BIM coordination; familiarity with SCADA/BMS interfaces for station systems.</li><li>Excellent interface management, stakeholder communication and team leadership skills.<br> <br> &nbsp;</li></ul><strong>Nice to Have:</strong><ul><li>Experience integrating station electrical design with PSD, tunnel ventilation controls, SCS/OCS interfaces, and evacuation strategies per NFPA 130.</li><li>Past authority liaison in KSA (RCRC/SDAIA utilities/Civil Defense)</li><li>RAMS exposure (EN 50126/8/9) and cyber/physical security considerations for stations.</li></ul><br>If you find this job matching your skills, please apply or share your CV on sayali.kothmire@nesfircroft.com<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p><h4>Job role - principal electrical design engineer – mission critical (data centres)</h4> <p>Verbal and written communication in English is mandatory.</p> <p><strong>Strong experience</strong></p> <ul> <li>Uptime Tier III/IV data center design experience</li> <li>MV/LV, UPS & generator design expertise</li> <li>Data center standards knowledge (Uptime/TIA-942/NFPA)</li> <li>Client-facing leadership and stakeholder management experience</li> </ul> <p><strong>Responsibilities</strong></p> <ul> <li>Translate client requirements into robust electrical designs, including electrical distribution (medium and low voltage), generator, UPS systems, switchgear, busducts, grounding schemes, power monitoring systems, fire detection and alarm system etc.</li> <li>Produce all technical documentation: calculations, system studies, single-line diagrams, layout drawings, specifications, block schematics, and compliance tables.</li> <li>Lead conceptual and detailed design reviews, leveraging advanced analytical tools, BIM/Revit models, and coordination with architectural, mechanical, and building technology disciplines.</li> <li>Mentor and develop junior engineers, share best practices in mission-critical electrical systems, and drive continuous improvement across the design team.</li> <li>Collaborate closely with regional and global teams to grow consulting capabilities and ensure alignment with global design standards.</li> <li>Develop and standardize scalable, repeatable data center solutions to drive consistency and efficiencies across UAE and KSA.</li> <li>Conduct site assessments, capacity planning, and feasibility studies aligned with Uptime Institute Tier requirements.</li> <li>Ensure compliance with international standards (Uptime Institute, TIA-942, NFPA, ASHRAE) and local regulations.</li> <li>Drive business growth by contributing to technical proposals, client presentations, and by identifying opportunities for service enhancements.</li> </ul> <p><strong>Qualifications</strong></p> <ul> <li>Bachelor’s or master’s degree in electrical engineering.</li> <li>10+ years of progressive electrical experience in planning, designing, and delivering large-scale data centers, including multiple Uptime Tier III/IV projects.</li> <li>Demonstrated ability to coordinate with stakeholders in complex, matrixed environments.</li> <li>Professional certifications such as Uptime Tier Certified Professional, PMP, LEED AP, or BICSI RCDD are highly desirable.</li> <li>In-depth knowledge of data centres electrical infrastructure, power distribution topologies, servers, storage, network systems, SCADA systems, power management, ELV, and security.</li> <li>Experienced in data center construction phasing and associated design planning.</li> <li>Strong communication skills for effective client presentations, stakeholder workshops, and cross-functional coordination.</li> <li>Familiarity with local and international codes and standards, including NEC, IEC, ISO 50001, ISO 27001, PDPL, and ESMA.</li> </ul> <p>With over 90 years' combined experience, NES Fircroft is proud to be the world's leading engineering staffing provider spanning the oil & gas, power & renewables, chemicals, construction & infrastructure, life sciences, mining and manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<p><h4>Job role - principal electrical design engineer – mission critical (data centres)</h4> <p>Verbal and written communication in English is mandatory.</p> <p><strong>Strong experience</strong></p> <ul> <li>Uptime Tier III/IV data center design experience</li> <li>MV/LV, UPS & generator design expertise</li> <li>Data center standards knowledge (Uptime/TIA-942/NFPA)</li> <li>Client-facing leadership and stakeholder management experience</li> </ul> <p><strong>Responsibilities</strong></p> <ul> <li>Translate client requirements into robust electrical designs, including electrical distribution (medium and low voltage), generator, UPS systems, switchgear, busducts, grounding schemes, power monitoring systems, fire detection and alarm system etc.</li> <li>Produce all technical documentation: calculations, system studies, single-line diagrams, layout drawings, specifications, block schematics, and compliance tables.</li> <li>Lead conceptual and detailed design reviews, leveraging advanced analytical tools, BIM/Revit models, and coordination with architectural, mechanical, and building technology disciplines.</li> <li>Mentor and develop junior engineers, share best practices in mission-critical electrical systems, and drive continuous improvement across the design team.</li> <li>Collaborate closely with regional and global teams to grow consulting capabilities and ensure alignment with global design standards.</li> <li>Develop and standardize scalable, repeatable data center solutions to drive consistency and efficiencies across UAE and KSA.</li> <li>Conduct site assessments, capacity planning, and feasibility studies aligned with Uptime Institute Tier requirements.</li> <li>Ensure compliance with international standards (Uptime Institute, TIA-942, NFPA, ASHRAE) and local regulations.</li> <li>Drive business growth by contributing to technical proposals, client presentations, and by identifying opportunities for service enhancements.</li> </ul> <p><strong>Qualifications</strong></p> <ul> <li>Bachelor’s or master’s degree in electrical engineering.</li> <li>10+ years of progressive electrical experience in planning, designing, and delivering large-scale data centers, including multiple Uptime Tier III/IV projects.</li> <li>Demonstrated ability to coordinate with stakeholders in complex, matrixed environments.</li> <li>Professional certifications such as Uptime Tier Certified Professional, PMP, LEED AP, or BICSI RCDD are highly desirable.</li> <li>In-depth knowledge of data centres electrical infrastructure, power distribution topologies, servers, storage, network systems, SCADA systems, power management, ELV, and security.</li> <li>Experienced in data center construction phasing and associated design planning.</li> <li>Strong communication skills for effective client presentations, stakeholder workshops, and cross-functional coordination.</li> <li>Familiarity with local and international codes and standards, including NEC, IEC, ISO 50001, ISO 27001, PDPL, and ESMA.</li> </ul> <p>With over 90 years' combined experience, NES Fircroft is proud to be the world's leading engineering staffing provider spanning the oil & gas, power & renewables, chemicals, construction & infrastructure, life sciences, mining and manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong><strong> Job Description<br>Job Role - Principal Electrical Design Engineer – Mission Critical (Data Centres)<br>Verbal and written communication in English is mandatory<br> Strong Experience-&nbsp;</strong></strong><ul><li>Uptime Tier III/IV Data Center Design Experience</li><li>MV/LV, UPS &amp; Generator Design Expertise</li><li>Data Center Standards Knowledge (Uptime/TIA-942/NFPA)</li><li>Client-Facing Leadership and Stakeholder Management Experience</li></ul><strong><br> Responsibilities</strong><br><ul><li>Translate client requirements into robust electrical designs, including electrical distribution (medium and low voltage), generator, UPS systems, switchgear, busducts, grounding schemes, power monitoring systems, fire detection and alarm system etc.</li><li>Produce all technical documentation: calculations, system studies, single-line diagrams, layout drawings, specifications, block schematics, and compliance tables.</li><li>Lead conceptual and detailed design reviews, leveraging advanced analytical tools, BIM/Revit models, and coordination with architectural, mechanical, and building technology disciplines.</li><li>Mentor and develop junior engineers, share best practices in mission-critical electrical systems, and drive continuous improvement across the design team.</li><li>Collaborate closely with regional and global teams to grow consulting capabilities and ensure alignment with global design standards</li><li>Develop and standardize scalable, repeatable data center solutions to drive consistency and efficiencies across UAE and KSA.</li><li>Conduct site assessments, capacity planning, and feasibility studies aligned with Uptime Institute Tier requirements.</li><li>Ensure compliance with international standards (Uptime Institute, TIA-942, NFPA, ASHRAE) and local regulations.</li><li>Drive business growth by contributing to technical proposals, client presentations, and by identifying opportunities for service enhancements&nbsp;</li></ul><strong>Qualifications</strong><br><ul><li>Bachelor’s or Master’s degree in Electrical Engineering.</li><li>10+ years of progressive electrical experience in planning, designing, and delivering large-scale data centers, including multiple Uptime Tier III/IV projects.</li><li>Demonstrated ability to coordinate with stakeholders in complex, matrixed environments.</li><li>Professional certifications such as Uptime Tier Certified Professional, PMP, LEED AP, or BICSI RCDD are highly desirable.</li><li>In-depth knowledge of Data Centres Electrical infrastructure, Power distribution topologies, servers, storage, network systems, SCADA systems, power management, ELV, and security.</li><li>Experienced in data center construction phasing and associated design planning.</li><li>Strong communication skills for effective client presentations, stakeholder workshops, and cross-functional coordination.</li><li>Familiarity with local and international codes and standards, including NEC, IEC, ISO 50001, ISO 27001, PDPL, and ESMA.<br> &nbsp;</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p><h4>Job description</h4> <p><strong>Job role - Principal Engineer – Electrical – Metro Stations</strong><br> Verbal and written communication in English is mandatory.</p> <h4>Responsibilities:</h4> <ul> <li>Lead multi-disciplinary station electrical design: LV/MV building distribution, protection/coordination, earthing & bonding, lightning protection, standby generators & UPS, lighting & controls, across underground, at-grade, and elevated stations.</li> <li>Own the full design lifecycle: requirements capture, basis-of-design, load studies, selectivity/arc-flash reviews, single-lines, schematics, cable schedules, layouts, specs/BOQs, and employer’s requirements. Provide construction support as needed.</li> <li>Apply rail-specific life-safety standards in stations: e.g., NFPA 130 for fixed guideway transit (egress, fire protection, emergency ventilation & control/communications); coordinate with fire/life-safety, ventilation and architectural teams.</li> <li>Design compliant emergency lighting to EN 1838/BS 5266 (escape route, open-area, high-risk task) and produce photometric calculations & layouts (Dialux/Relux).</li> <li>Engineer EMC & earthing interfaces to EN 50121 (railway EMC) and EN 50122-1 (earthing/bonding for fixed installations) and manage interfaces with signaling/telecom/PSD.</li> <li>Coordinate digitally in BIM (Revit/Navisworks) with architecture, structural and MEP; run design reviews, clash prevention and interface matrices.</li> <li>Lead authority approvals (Saudi & UAE Civil Defence and utilities), support client/stakeholder workshops, value engineering and risk registers.</li> <li>Mentor and manage a team of designers; review deliverables, uphold QA/QC; contribute to proposal writing and level-of-effort estimates.</li> </ul> <h4>Qualifications:</h4> <ul> <li>Bachelor’s or Master’s degree in Electrical Engineering.</li> <li>Professional registration (e.g., CEng/PE) strongly preferred.</li> <li>12–18+ years in building/station electrical design with major rail/metro station projects; GCC experience strongly preferred.</li> <li>Strong grasp of NFPA 130, EN 1838/BS 5266 (emergency lighting), EN 50121/EN 50122 (EMC/earthing), BS 7671/IET Wiring Regs or NEC, and typical rail authority requirements.</li> <li>Fluency with ETAP/Amtech, Dialux/Relux, AutoCAD/Revit, and BIM coordination; familiarity with SCADA/BMS interfaces for station systems.</li> <li>Excellent interface management, stakeholder communication and team leadership skills.</li> </ul> <h4>Nice to have:</h4> <ul> <li>Experience integrating station electrical design with PSD, tunnel ventilation controls, SCS/OCS interfaces, and evacuation strategies per NFPA 130.</li> <li>Past authority liaison in KSA (RCRC/SDAIA utilities/Civil Defense).</li> <li>RAMS exposure (EN 50126/8/9) and cyber/physical security considerations for stations.</li> </ul> <p>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Company Al-Safasaf announces job openings for work in Saudi Arabia </b></p><p> </p><p><b>Electrical Engineers (Power Stations)</b></p><p><b>OHTL &amp; UG Cable EPC Projects</b></p><p>(Overhead Transmission Line)</p><p>(Underground Cable)</p><p>(Engineering, Procurement, and Construction)</p><p> </p><p>5 years or more of experience in electrical energy transfer projects</p><p>Experience in substations</p><p>Experience in electrical energy transfer projects at 115 kV</p><p>Experience in overhead transmission lines at 115 kV</p><p>Experience in underground cable systems at 115 kV</p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Company Al-Safasaf announces job openings for work in Saudi Arabia </b></p><p> </p><p><b>Electrical Engineers (Power Stations)</b></p><p><b>OHTL &amp; UG Cable EPC Projects</b></p><p>(Overhead Transmission Line)</p><p>(Underground Cable)</p><p>(Engineering, Procurement, and Construction)</p><p> </p><p>5 years or more of experience in electrical energy transfer projects</p><p>Experience in substations</p><p>Experience in electrical energy transfer projects at 115 kV</p><p>Experience in overhead transmission lines at 115 kV</p><p>Experience in underground cable systems at 115 kV</p><p><br></p><p><br></p></div>

<p><h4>Job description</h4> <p>An exciting career awaits you.</p> <p>At MPC, we’re committed to being a great place to work – one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment.</p> <h4>Position overview</h4> <p>The St. Paul Park Refinery has a full-time opening for an electrician who reports to the electrical foreman. The schedule for this position will be a 4-10 schedule Monday through Thursday, including some weekends and holidays. Occasionally, extra hours may be required. The electrician will support the operation of the refinery through properly maintaining refinery electrical systems. This allows for safe, compliant, and reliable refinery operation to support the refinery’s strategic business goals.</p> <h4>Job duties</h4> <ul> <li>Use various tools and equipment to effectively troubleshoot, repair, install, and commission electrical systems including motor circuits, low and medium voltage switchgear and motor control centers, battery systems, UPS systems, motor operated valves, microprocessor-based protective relays, low and medium voltage power transformers, variable frequency drives, electric heat tracing control systems, electrical raceways, industrial lighting, and complex control systems.</li> <li>Perform work per applicable standards and specifications (Marathon, industry, or manufacturer).</li> <li>Execute preventative maintenance activities as part of the Mechanical Integrity Program.</li> <li>Use and understand electrical one-line drawings, electrical schematics, and operate electrical testing equipment.</li> <li>Properly execute lock out/tag out procedures, work permitting, and other standard industrial safety processes.</li> <li>Adhere to and understand Marathon’s electrical safe work practices.</li> <li>Rack in and out electrical circuit breakers.</li> <li>Maintain required safety and development training per site plan.</li> <li>Understand when electrical personal protective equipment (PPE) is necessary and don appropriate PPE when required.</li> <li>Foster a positive attitude, willingness to collaborate, and team with others to accomplish work efficiently and to high quality standards.</li> </ul> <h4>Required qualifications</h4> <ul> <li>High school diploma or GED required.</li> <li>Minnesota master or journey worker electrician license is required.</li> <li>Minimum of 3 years of trade or relevant work experience required.</li> <li>Ability to learn complex refinery-related material.</li> <li>Valid driver’s license is required.</li> <li>Transportation Worker Identification Card (TWIC) is required upon hire.</li> <li>This position is on a 4-day, 10-hour (day shift) work schedule that runs Monday through Thursday and will require some work on weekends, nights, and holidays.</li> <li>Successful candidates must be fit to perform the essential functions of the job and adhere to a strict drug and alcohol policy.</li> <li>Applicants will be required to pass a pre-employment written test, hands-on test, and physical examination.</li> <li>Familiarity with refinery equipment codes and standards.</li> <li>Excellent written and verbal communication skills.</li> <li>Must be able to wear appropriate PPE in the refinery and be able to physically perform all tasks in the field. This may include but is not limited to working indoors, such as maintenance shops, outdoors in open areas, process units, at heights, and confined spaces with or without respiratory protection and limited mobility.</li> <li>Must be able to support turnaround activities as required.</li> </ul> <h4>Pay</h4> <p>This role has a starting rate of $54.91 while in training. The maximum rate for the position is $56.89 with demonstrated qualification and proficiency after being hired. Annual increases are scheduled.</p> <h4>Location</h4> <p>St Paul Park, Minnesota</p> <h4>Additional information</h4> <p>This is a full-time, regular employee position.</p> <p>Marathon Petroleum Company LP is an equal opportunity employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, creed (including pregnancy, childbirth, breastfeeding or related medical conditions), religion, sex, sexual orientation, gender identity or expression, reproductive health decision-making, national origin, mental or physical disability, medical condition or AIDS/HIV status, ancestry, genetic information, military or veteran status, marital status, citizenship, or any other status protected by applicable federal, state, or local laws.</p> <p>We will consider all qualified applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.</p> <p>Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401(k) matching program, paid parental leave, and educational reimbursement. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program.</p></p><p></p>

<p><h4>Position summary</h4> <p>Set-up, operate, and troubleshoot all AV/projection/lighting/conferencing equipment, devices, and systems. Oversee the set-up of AV equipment in banquet and meeting rooms. Ensure all AV equipment is fully operational, repair or clean equipment when necessary. Label any broken equipment and communicate problems to manager/supervisor. Tape down and dress all loose wire and cable. Check delivered equipment and room set-up against banquet event order. Communicate any additions or deletions to flowsheets to manager/supervisor. Assist and instruct guests/customers regarding proper usage and operation of AV equipment, up-sell different AV services, and monitor equipment operation at appropriate intervals. Break-down, remove, and secure equipment when not in use. Read, understand, and adhere to Marriott Visual Productions (MVP program) SOP book.</p> <p>Follow all company safety and security policies and procedures, and report accidents, injuries, and unsafe work conditions to manager. Follow all company policies and procedures, ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, and</p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <strong>Account Management:</strong> </p> <p> <strong> </strong> </p> <p> Build and maintain strong relationships with key clients and act as the primary point of contact for sales-related activities.</p> <p> Establish senior-level contacts with stakeholders and decision makers within assigned accounts.</p> <p> Develop a deep understanding of customer business needs, objectives, and challenges.</p> <p> Conduct regular account planning and maintain long-term customer relationships.</p> <p> </p> <p> <strong>Sales Strategy &amp; Business Development:</strong> </p> <p> <strong> </strong> </p> <p> Develop and implement sales strategies to achieve revenue targets.</p> <p> Identify opportunities for upselling and cross-selling services.</p> <p> Manage the full sales cycle from prospecting to closing deals.</p> <p> Identify and acquire key accounts across public and private sectors in Jordan.</p> <p> </p> <p> <strong>ICT Solutions Sales:</strong> </p> <p> <strong> </strong> </p> <p>Promote and position Waseela s ICT solutions include:</p> <p> Cybersecurity solutions</p> <p> Connectivity and coverage services</p> <p> Extra-Low Voltage (ELV) systems (CCTV, Access Control, Structured Cabling)</p> <p> IoT and smart technology solutions.</p> <p> <br> </p> <p> <strong>Customer Needs Analysis:</strong> </p> <p> <strong> </strong> </p> <p> Conduct needs assessments to understand client requirements.</p> <p> Work with presales and technical teams to design suitable solutions.</p> <p> Propose tailored ICT solutions addressing customer challenges.</p> <p> </p> <p> <strong>Sales Presentations &amp; Negotiation:</strong> </p> <p> <strong> </strong> </p> <p> Deliver sales presentations to decision makers.</p> <p> Prepare proposals, quotations, and commercial offers.</p> <p> Negotiate contracts, pricing, and commercial terms.</p> <p> Participate in tenders and ensure submission deadlines are met.</p> <p> </p> <p> <strong>Market Intelligence:</strong> </p> <p> <strong> </strong> </p> <p> Maintain strong awareness of the Jordanian ICT market and competitive landscape.</p> <p> Identify industries and sectors with high growth potential.</p> <p> Monitor emerging technologies and market trends.</p> <p> </p> <p> <strong>Collaboration:</strong> </p> <p> <strong> </strong> </p> <p> Work closely with internal teams including presales, systems engineering, marketing, PMO, and operations to ensure successful delivery of solutions.</p> <p> </p> <p> <strong>Sales Reporting &amp; Administration:</strong> </p> <p> <strong> </strong> </p> <p> Maintain accurate sales pipelines and customer records using CRM systems.</p> <p> Prepare sales forecasts and performance reports for management.</p> <p> Ensure compliance with company commercial policies and internal processes.</p></div></section>

<ul><li>Diagnose and resolve AV and related technical issues across the residence</li><li>Install, configure, and maintain AV systems including home theatres and entertainment systems</li><li>Troubleshoot signal issues across cable, satellite, and digital TV systems</li><li>Support network connectivity including Wi-Fi troubleshooting and reporting coverage issues</li><li>Assist users with connecting devices, systems, and peripherals</li><li>Maintain and repair AV equipment and electronic boards where required</li><li>Ensure all AV systems operate at optimal performance at all times</li><li>Monitor and maintain CCTV systems</li><li>Work collaboratively with the maintenance and IT teams</li><li>Assist with general technical and operational tasks as required</li><li>Report faults and follow through to resolution</li><li>Maintain clear communication with team members and management</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Experience and knowledge in Crestron systems</li><li>Very good knowledge and hands-on experience with Crestron systems</li><li>Excellent knowledge of audio-visual systems including AV processors, home theatres, projectors, mixers, amplifiers, microphones, and speakers</li><li>Strong understanding of AV cabling, connectors, and installation materials</li><li>Excellent knowledge of CCTV systems</li><li>Good knowledge to operate a cinema hall</li><li>Ability to operate and maintain cinema room systems</li><li>Strong knowledge of electronic components and board-level repair</li><li>Good computer, IT, and network troubleshooting skills</li><li>Strong ability to read and interpret technical manuals and schematics</li><li>Excellent troubleshooting and fault-finding capability</li><li>Good command of English & Arabic (written and verbal)</li><li>Passion for AV technology, music, and entertainment systems</li><li>Ability to work under pressure and meet tight deadlines</li></ul>

<p><h4>Job description</h4> <p>An exciting career awaits you.</p> <p>At MPC, we’re committed to being a great place to work – one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment.</p> <h4>Position overview</h4> <p>The St. Paul Park Refinery has a full-time opening for an electrician who reports to the electrical foreman. The schedule for this position will be a 4-10 schedule Monday through Thursday, including some weekends and holidays. Occasionally, extra hours may be required. The electrician will support the operation of the refinery through properly maintaining refinery electrical systems. This allows for safe, compliant, and reliable refinery operation to support the refinery’s strategic business goals.</p> <h4>Job duties</h4> <ul> <li>Use various tools and equipment to effectively troubleshoot, repair, install, and commission electrical systems including motor circuits, low and medium voltage switchgear and motor control centers, battery systems, UPS systems, motor operated valves, microprocessor-based protective relays, low and medium voltage power transformers, variable frequency drives, electric heat tracing control systems, electrical raceways, industrial lighting, and complex control systems.</li> <li>Perform work per applicable standards and specifications (Marathon, industry, or manufacturer).</li> <li>Execute preventative maintenance activities as part of the Mechanical Integrity Program.</li> <li>Use and understand electrical one-line drawings, electrical schematics, and operate electrical testing equipment.</li> <li>Properly execute lock out/tag out procedures, work permitting, and other standard industrial safety processes.</li> <li>Adhere to and understand Marathon’s electrical safe work practices.</li> <li>Rack in and out electrical circuit breakers.</li> <li>Maintain required safety and development training per site plan.</li> <li>Understand when electrical personal protective equipment (PPE) is necessary and don appropriate PPE when required.</li> <li>Foster a positive attitude, willingness to collaborate, and team with others to accomplish work efficiently and to high quality standards.</li> </ul> <h4>Required qualifications</h4> <ul> <li>High school diploma or GED required.</li> <li>Minnesota master or journey worker electrician license is required.</li> <li>Minimum of 3 years of trade or relevant work experience required.</li> <li>Ability to learn complex refinery-related material.</li> <li>Valid driver’s license is required.</li> <li>Transportation Worker Identification Card (TWIC) is required upon hire.</li> <li>This position is on a 4-day, 10-hour (day shift) work schedule that runs Monday through Thursday and will require some work on weekends, nights, and holidays.</li> <li>Successful candidates must be fit to perform the essential functions of the job and adhere to a strict drug and alcohol policy.</li> <li>Applicants will be required to pass a pre-employment written test, hands-on test, and physical examination.</li> <li>Familiarity with refinery equipment codes and standards.</li> <li>Excellent written and verbal communication skills.</li> <li>Must be able to wear appropriate PPE in the refinery and be able to physically perform all tasks in the field. This may include but is not limited to working indoors, such as maintenance shops, outdoors in open areas, process units, at heights, and confined spaces with or without respiratory protection and limited mobility.</li> <li>Must be able to support turnaround activities as required.</li> </ul> <h4>Pay</h4> <p>This role has a starting rate of $54.91 while in training. The maximum rate for the position is $56.89 with demonstrated qualification and proficiency after being hired. Annual increases are scheduled.</p> <h4>Location</h4> <p>St Paul Park, Minnesota</p> <h4>Additional information</h4> <p>This is a full-time, regular employee position.</p> <p>Marathon Petroleum Company LP is an equal opportunity employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, creed (including pregnancy, childbirth, breastfeeding or related medical conditions), religion, sex, sexual orientation, gender identity or expression, reproductive health decision-making, national origin, mental or physical disability, medical condition or AIDS/HIV status, ancestry, genetic information, military or veteran status, marital status, citizenship, or any other status protected by applicable federal, state, or local laws.</p> <p>We will consider all qualified applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.</p> <p>Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401(k) matching program, paid parental leave, and educational reimbursement. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program.</p></p><p></p>