وظائف مهندس تصميم ميكانيكي في الأردن

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Job description<br>Job Role -Principal Engineer – Mechanical – Aviation Buildings<br>Verbal and written communication in English is mandatory<br>Responsibilities:</strong><ul><li>Lead mechanical/HVAC design from feasibility and basis-of-design (BoD) through detailed design, tender and construction support for aviation facilities.</li><li>Own the environmental strategy for very large volumes (e.g., hangar bays): heating/cooling concepts, destratification, purge/exhaust modes, make-up air, and controls sequences—balancing energy, IAQ and safety. (UFC/ASHRAE/NFPA context).</li><li>Engineer specialist ventilation for hazardous operations: paint spray booths/rooms, fuel-cell maintenance/purge ventilation, welding/fume extraction, VOC control, and hazardous-area interfaces with electrical/controls.</li><li>Integrate process utilities common to MRO and workshops.</li><li>Shape catering facility HVAC and hygienic air zones: kitchen exhaust &amp; makeup air (NFPA 96), pressure cascades, temperature/humidity control for clean prep/packing.</li><li>Deliver BIM-led coordination (Revit/Navisworks) across architecture, structures, process, fire protection, and controls; lead clash resolution and model QA.</li><li>Run calculations &amp; simulations: loads, duct/pipe sizing, ventilation rates, smoke/fume capture, and (where needed) CFD to support the thermal comfort studies.</li><li>Author technical documents: BoD, design reports, specifications, sequences of operation, control narratives, FAT/SAT/commissioning plans.</li><li>Engage stakeholders—airlines/MROs, airport operators, food safety teams, and authorities—to secure approvals and smooth delivery.</li><li>Lead retrofit, refurbishment, and brownfield upgrade projects within operational airport environments—assessing existing systems, developing phased upgrade strategies, ensuring minimal disruption to ongoing operations, and integrating new systems with legacy infrastructure while addressing capacity, compliance, and energy performance improvements.<br> <br> &nbsp;</li></ul><strong>Key systems &amp; domains you’ll cover:</strong><ul><li>Hangars &amp; workshops: general and emergency exhaust, purge ventilation for fuel system work, floor-level capture where required, destratification/HVLS fans, door air management, radiant/air systems, PCA (pre-conditioned air) and GSE interfaces.</li><li>Catering facilities: high-duty kitchen exhaust &amp; makeup air (hoods, MAUs, heat recovery), grease ducting, rooftop terminations, pressure zoning for hygiene, and interfaces to cold rooms/freezers and clean areas.</li><li>Experience in refurbishment projects, passenger terminal building Mechanical design (HVAC, Drainage systems) is preferred.<br> <br> &nbsp;</li></ul><strong>Qualifications:</strong><ul><li>Bachelor’s or Master’s degree in Mechanical Engineering.</li><li>Professional registration (e.g., CEng/PE) strongly preferred.</li><li>15+ years’ experience in building services (mechanical/HVAC), with significant aviation project delivery (Passenger terminal building, hangars, MRO shops, flight catering, or similar).</li><li>Proven leadership as Lead/Principal Engineer on multi-disciplinary design projects and Prior delivery in live airport environments (airside/landside interfaces, works phasing) is preferred.</li><li>Expertise writing BoDs, specifications, P&amp;IDs, control sequences, etc.</li><li>BIM fluency: Revit, Navisworks; competence with calculations (e.g., IES-VE/HAP/eQuest),CFD exposure preferred.</li><li>Client-facing communication and team leadership; mentoring and QA/QC across multiple concurrent packages.</li><li>Strong communication skills for effective client presentations, stakeholder workshops, and cross-functional coordination.</li><li>Willingness to be based at Dammam Airport for the initial phase of the project (short-term assignment) and relocate to the main office upon project completion</li></ul><br>If you find this job matching your skills, please apply or share your CV on sayali.kothmire@nesfircroft.com<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>&nbsp;</p> <p ><b><span>Job Summary</span></b></p> <p ><span>Arab Potash Company is seeking an accomplished&nbsp;<b>Senior Mechanical Engineer</b> to support the delivery of major industrial projects from engineering design through construction, commissioning, and startup. The role requires strong technical judgment, effective coordination with multidisciplinary teams, and the ability to ensure mechanical deliverables meet project requirements, applicable standards, and business objectives.</span></p> <p ><b><u><span>Duties and Responsibilities</span></u></b></p> <p ><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Review and validate mechanical engineering deliverables, including designs, calculations, drawings, technical submittals, specifications, datasheets, and vendor proposals.</span></p> <p ><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Ensure compliance with project requirements, applicable engineering standards, safety expectations, and quality procedures.</span></p> <p ><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Coordinate mechanical scope with civil, structural, electrical, instrumentation, process, procurement, and construction teams.</span></p> <p ><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Support procurement activities through technical bid evaluations, vendor clarifications, equipment selection, and sourcing recommendations.</span></p> <p ><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Monitor project progress, resolve technical issues, and support timely completion of mechanical deliverables.</span></p> <p ><span><span>·<span>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Engage with contractors, consultants, vendors, and internal stakeholders during design reviews, coordination meetings, construction, commissioning, and startup activities.</span></p> <p>&nbsp;</p> <p>&nbsp;</p> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 7+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p><h4>Job description</h4> <p><strong>Job role - Principal engineer – mechanical – aviation buildings</strong><br> Verbal and written communication in English is mandatory.</p> <h4>Responsibilities:</h4> <ul> <li>Lead mechanical/HVAC design from feasibility and basis-of-design (BoD) through detailed design, tender and construction support for aviation facilities.</li> <li>Own the environmental strategy for very large volumes (e.g., hangar bays): heating/cooling concepts, destratification, purge/exhaust modes, make-up air, and controls sequences—balancing energy, IAQ and safety (UFC/ASHRAE/NFPA context).</li> <li>Engineer specialist ventilation for hazardous operations: paint spray booths/rooms, fuel-cell maintenance/purge ventilation, welding/fume extraction, VOC control, and hazardous-area interfaces with electrical/controls.</li> <li>Integrate process utilities common to MRO and workshops.</li> <li>Shape catering facility HVAC and hygienic air zones: kitchen exhaust and makeup air (NFPA 96), pressure cascades, temperature/humidity control for clean prep/packing.</li> <li>Deliver BIM-led coordination (Revit/Navisworks) across architecture, structures, process, fire protection, and controls; lead clash resolution and model QA.</li> <li>Run calculations and simulations: loads, duct/pipe sizing, ventilation rates, smoke/fume capture, and (where needed) CFD to support the thermal comfort studies.</li> <li>Author technical documents: BoD, design reports, specifications, sequences of operation, control narratives, FAT/SAT/commissioning plans.</li> <li>Engage stakeholders—airlines/MROs, airport operators, food safety teams, and authorities—to secure approvals and smooth delivery.</li> <li>Lead retrofit, refurbishment, and brownfield upgrade projects within operational airport environments—assessing existing systems, developing phased upgrade strategies, ensuring minimal disruption to ongoing operations, and integrating new systems with legacy infrastructure while addressing capacity, compliance, and energy performance improvements.</li> </ul> <h4>Key systems and domains you’ll cover:</h4> <ul> <li>Hangars and workshops: general and emergency exhaust, purge ventilation for fuel system work, floor-level capture where required, destratification/ HVLS fans, door air management, radiant/air systems, PCA (pre-conditioned air) and GSE interfaces.</li> <li>Catering facilities: high-duty kitchen exhaust and makeup air (hoods, MAUs, heat recovery), grease ducting, rooftop terminations, pressure zoning for hygiene, and interfaces to cold rooms/freezers and clean areas.</li> <li>Experience in refurbishment projects, passenger terminal building mechanical design (HVAC, drainage systems) is preferred.</li> </ul> <h4>Qualifications:</h4> <ul> <li>Bachelor’s or master’s degree in mechanical engineering.</li> <li>Professional registration (e.g., CEng/PE) strongly preferred.</li> <li>15+ years’ experience in building services (mechanical/HVAC), with significant aviation project delivery (passenger terminal building, hangars, MRO shops, flight catering, or similar).</li> <li>Proven leadership as lead/principal engineer on multi-disciplinary design projects and prior delivery in live airport environments (airside/landside interfaces, works phasing) is preferred.</li> <li>Expertise writing BoDs, specifications, P&IDs, control sequences, etc.</li> <li>BIM fluency: Revit, Navisworks; competence with calculations (e.g., IES-VE/HAP/eQuest), CFD exposure preferred.</li> <li>Client-facing communication and team leadership; mentoring and QA/QC across multiple concurrent packages.</li> <li>Strong communication skills for effective client presentations, stakeholder workshops, and cross-functional coordination.</li> <li>Willingness to be based at Dammam Airport for the initial phase of the project (short-term assignment) and relocate to the main office upon project completion.</li> </ul> <p>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the oil & gas, power & renewables, chemicals, construction & infrastructure, life sciences, mining and manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<p><h4>Responsibilities:</h4> <p><strong>Lead electrical design</strong> from feasibility and basis of design (BoD) through detailed design, tender, and construction support for aviation facilities.</p> <p><strong>Own the electrical power strategy</strong> for large-scale facilities (e.g., hangar bays): MV/LV distribution, redundancy, load management, earthing, and control philosophies—balancing reliability, safety, and energy performance (IEC/NFPA context).</p> <p><strong>Engineer electrical systems</strong> for hazardous operations: paint booths/rooms, fuel-cell maintenance areas, welding zones—ensuring compliance with ATEX/IECEx and coordination with mechanical ventilation and controls.</p> <p><strong>Design and specify power systems</strong> for aviation facilities: transformers, generators, UPS, distribution boards, and backup systems for mission-critical operations.</p> <p><strong>Integrate electrical utilities</strong> across MRO and workshop environments—ground power units (GPU), PCA interfaces, process equipment loads, and coordination with mechanical, fire/life safety, and control systems.</p> <p><strong>Shape electrical systems</strong> for catering facilities: resilient power distribution for kitchens, cold-chain systems, and hygienic areas aligned with HACCP/ISO 22000 requirements.</p> <p><strong>Deliver BIM-led coordination</strong> (Revit/Navisworks) across architecture, structures, MEP, and specialist systems; lead clash resolution and model QA.</p> <p><strong>Perform calculations and studies:</strong> load estimation, cable sizing, protection coordination, short-circuit analysis, and lighting design.</p> <p><strong>Author technical documents:</strong> BoD, load schedules, single-line diagrams (SLDs), specifications, and commissioning plans.</p> <p><strong>Mentor and review engineers/designers;</strong> lead design reviews, HAZOPs, and constructability/operability workshops.</p> <p><strong>Engage stakeholders</strong>—airlines, MROs, airport operators, and authorities—to secure approvals and ensure smooth delivery.</p> <p><strong>Lead retrofit, refurbishment, and brownfield upgrades</strong> in operational airport environments—assessing existing systems, planning phased upgrades, and integrating new systems with minimal disruption while improving capacity, compliance, and energy performance.</p> <h4>Key systems & domains you’ll cover:</h4> <ul> <li>Hangars & workshops: MV/LV distribution, ground power units (GPU), PCA electrical interfaces, high-bay lighting, emergency power, earthing and bonding for aircraft safety, and hangar door electrics.</li> <li>Paint/corrosion control: hazardous-area electrical systems, explosion-proof equipment, interlocks, LEL monitoring interfaces, and ATEX/IECEx compliance coordinated with ventilation and controls.</li> <li>Welding & fabrication: power distribution for welding equipment, equipment earthing, task lighting, and integration with extraction/LEV systems aligned with OSHA/ACGIH guidance.</li> <li>Power systems: transformers, generators, UPS, LV panels, and distribution networks designed for redundancy, resilience, and mission-critical operations.</li> <li>Catering facilities: resilient power supply for kitchens, cold rooms/freezers, food processing areas, and hygienic zoning aligned with HACCP/ISO 22000 requirements.</li> <li>ELV & controls: fire alarm systems (NFPA 72), ICT, security (CCTV/access control), structured cabling, and BMS/SCADA integration for operational monitoring and control.</li> </ul> <h4>Qualifications:</h4> <ul> <li>Bachelor’s degree in electrical engineering; master’s degree preferred.</li> <li>Professionally registered (CEng, PE, or equivalent).</li> <li>15+ years' experience in electrical building services design, including aviation and complex infrastructure projects.</li> <li>Demonstrated experience leading multidisciplinary design teams and delivering major projects.</li> </ul> <h4>Technical expertise:</h4> <ul> <li>Strong knowledge of international electrical design codes, standards, and aviation requirements.</li> <li>Expertise in MV/LV power distribution, load assessments, protection systems, and earthing design.</li> <li>Proficiency in BIM and industry-standard design software, including Revit, Navisworks, ETAP, and Dialux.</li> <li>Experience in airport facilities, terminal buildings, and aviation-related infrastructure is highly desirable.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>An Well Known Engineering Solutions Company is seeking a highly skilled and experienced <strong>Lead Mechanical Design and Engineering Solutions</strong> professional to join the team on a <strong>permanent</strong>, onsite basis. This is a pivotal role for an individual passionate about driving innovation and delivering exceptional mechanical engineering solutions. You will have the opportunity to lead and mentor a team, manage complex projects from conception to completion, and significantly contribute to the company's success.</p> Key Responsibilities <br><ul> <li>Receive and review project requirements from the Sales team to ensure all technical details are complete before starting the design process.</li> <li>Assign daily tasks to the design team and follow up on progress based on project priorities and deadlines.</li> <li>Supervise the development of technical solutions in line with client requirements and approved specifications.</li> <li>Review load calculations, system selection, drawings, BOQs, Take-Off Sheets, and technical proposals before submission for approval.</li> <li>Prepare and review Take-Off Sheets and monitor any changes in materials, equipment, or project quantities.</li> <li>Coordinate with Sales, Supply Chain, Warehouse, and Operations teams to ensure smooth project execution.</li> <li>Support the Sales team in technical meetings, presentations, and discussions related to complex projects.</li> <li>Provide technical support during project implementation and ensure required changes are reflected in drawings and documents.</li> <li>Monitor the quality of design outputs and ensure compliance with approved technical standards.</li> <li>Guide, train, and support team members to improve their technical performance.</li> <li>Prepare regular technical and operational reports on project progress and design team outputs.</li> </ul> Required Qualifications <br><ul> <li>7 9 years of experience in designing HVAC systems, refrigeration systems, and engineering solutions.</li> <li>Proven experience in supervising design teams and reviewing their daily technical outputs.</li> <li>Strong experience in preparing and reviewing calculations, drawings, BOQs, Take-Off Sheets, and technical proposals.</li> <li>Experience in technical coordination with Sales, Operations, and Supply Chain teams throughout project stages.</li> <li>Strong ability to follow up on technical modifications and ensure they are properly reflected in drawings, materials, and project deliverables.</li> <li>Proficiency in AutoCAD and load calculation software such as HAP or Elite.</li> <li>Knowledge of Revit MEP or system/equipment selection software is preferred.</li> <li>Proficiency in using computers, Microsoft Office applications, and relevant office systems.</li> <li>Strong communication, coordination, problem-solving, and team leadership skills.</li> </ul> What We Offer <br><ul> <li> <strong>Competitive compensation</strong> commensurate with experience and qualifications.</li> <li>A comprehensive and <strong>competitive benefits package</strong>.</li> <li>The opportunity to work in a dynamic and innovative engineering environment.</li> <li>A <strong>permanent</strong>, onsite position with a stable and reputable organization.</li> <li>The chance to lead impactful projects and make a significant contribution to our technical advancements.</li> </ul></div></section>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul> <h4>Compensation details:</h4> <p>$34.17 per hour</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting date: 05/06/2026 - Until filled</p> <p>The job requisition is expected to remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions, or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Journeyman.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work without supervision.</li> <li>Provides technical and directional leadership guidance to lower-level aircraft mechanics.</li> <li>Provides training to lower-level aircraft mechanics.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of three years of actual aircraft mechanic maintenance experience required.</li> <li>Minimum of one year experience on MQ-9 aircraft, as an aircraft mechanic.</li> <li>Must have comprehensive knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess comprehensive knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a comprehensive understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry, and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul> <h4>Compensation details</h4> <p>34.17</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting: 05/05/2026 - 05/09/2026</p> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under federal laws and supplemental language at labor laws posters.</p></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, A&P flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneuhydraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Journeyman.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash /cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work without supervision.</li> <li>Provides technical and directional leadership guidance to lower-level Aircraft Mechanics.</li> <li>Provides training to lower-level Aircraft Mechanics.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of three years of actual aircraft mechanic maintenance experience required.</li> <li>Minimum of one year experience on MQ-9 aircraft, as an aircraft mechanic.</li> <li>Must have comprehensive knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess comprehensive knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a comprehensive understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 aircraft composite repair / replacement experience.</li> </ul> <h4>Compensation details:</h4> <p>36.26</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair / replacement experience.</li> </ul> <h4>Compensation details:</h4> <p>34.17</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Job role - Principal Electrical Design Engineer – Mission Critical (Data Centres)</h4> <p>Verbal and written communication in English is mandatory.</p> <p><strong>Strong experience</strong></p> <ul> <li>12+ years in data center/mission critical projects</li> <li>Hyperscale/colocation data center experience</li> <li>UAE/KSA (GCC) project exposure</li> <li>Client-facing leadership and business development experience</li> <li>Experience leading multidisciplinary engineering teams in a consulting environment</li> </ul> <p><strong>Responsibilities</strong></p> <ul> <li>Lead the design, integration, and delivery of electrical and MEP systems for mission-critical data centre projects.</li> <li>Provide technical governance by reviewing and approving engineering deliverables aligned with global standards and client requirements.</li> <li>Drive development of modular, cloud, colocation, and hyperscale data centre solutions.</li> <li>Act as the primary client interface, building trusted advisory relationships across key accounts in the region.</li> <li>Lead technical workshops, design reviews, and senior stakeholder presentations.</li> <li>Own project strategy, ensuring delivery excellence across lifecycle stages from concept to execution.</li> <li>Drive business development including bid leadership, proposal strategy, and commercial positioning.</li> <li>Identify and capitalize on opportunities in digital infrastructure, hyperscale, and cloud ecosystems.</li> <li>Collaborate with regional leadership to expand the mission-critical/data centre service offering.</li> <li>Lead, mentor, and develop multidisciplinary engineering teams across electrical, mechanical, civil, and architecture.</li> <li>Oversee resource planning, utilization, and capability development within the data centre practice.</li> <li>Ensure all solutions meet benchmarks for resilience, sustainability, scalability, and operational efficiency.</li> </ul> <p><strong>Qualifications</strong></p> <ul> <li>Bachelor’s degree in Electrical Engineering or a related field; Master’s preferred.</li> <li>12+ years of experience in mission-critical/data centre design, delivery, or advisory.</li> <li>Strong understanding of Tier standards, NFPA, ASHRAE, Uptime Institute guidelines.</li> <li>Proven experience in GCC markets (UAE and/or KSA).</li> <li>Experience working with large consultancies or international engineering firms.</li> <li>Excellent leadership, communication, and client-facing abilities.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p><strong>Job role - Principal Engineer – Electrical – Metro Stations</strong><br> Verbal and written communication in English is mandatory.</p> <h4>Responsibilities:</h4> <ul> <li>Lead multi-disciplinary station electrical design: LV/MV building distribution, protection/coordination, earthing & bonding, lightning protection, standby generators & UPS, lighting & controls, across underground, at-grade, and elevated stations.</li> <li>Own the full design lifecycle: requirements capture, basis-of-design, load studies, selectivity/arc-flash reviews, single-lines, schematics, cable schedules, layouts, specs/BOQs, and employer’s requirements. Provide construction support as needed.</li> <li>Apply rail-specific life-safety standards in stations: e.g., NFPA 130 for fixed guideway transit (egress, fire protection, emergency ventilation & control/communications); coordinate with fire/life-safety, ventilation and architectural teams.</li> <li>Design compliant emergency lighting to EN 1838/BS 5266 (escape route, open-area, high-risk task) and produce photometric calculations & layouts (Dialux/Relux).</li> <li>Engineer EMC & earthing interfaces to EN 50121 (railway EMC) and EN 50122-1 (earthing/bonding for fixed installations) and manage interfaces with signaling/telecom/PSD.</li> <li>Coordinate digitally in BIM (Revit/Navisworks) with architecture, structural and MEP; run design reviews, clash prevention and interface matrices.</li> <li>Lead authority approvals (Saudi & UAE Civil Defence and utilities), support client/stakeholder workshops, value engineering and risk registers.</li> <li>Mentor and manage a team of designers; review deliverables, uphold QA/QC; contribute to proposal writing and level-of-effort estimates.</li> </ul> <h4>Qualifications:</h4> <ul> <li>Bachelor’s or Master’s degree in Electrical Engineering.</li> <li>Professional registration (e.g., CEng/PE) strongly preferred.</li> <li>12–18+ years in building/station electrical design with major rail/metro station projects; GCC experience strongly preferred.</li> <li>Strong grasp of NFPA 130, EN 1838/BS 5266 (emergency lighting), EN 50121/EN 50122 (EMC/earthing), BS 7671/IET Wiring Regs or NEC, and typical rail authority requirements.</li> <li>Fluency with ETAP/Amtech, Dialux/Relux, AutoCAD/Revit, and BIM coordination; familiarity with SCADA/BMS interfaces for station systems.</li> <li>Excellent interface management, stakeholder communication and team leadership skills.</li> </ul> <h4>Nice to have:</h4> <ul> <li>Experience integrating station electrical design with PSD, tunnel ventilation controls, SCS/OCS interfaces, and evacuation strategies per NFPA 130.</li> <li>Past authority liaison in KSA (RCRC/SDAIA utilities/Civil Defense).</li> <li>RAMS exposure (EN 50126/8/9) and cyber/physical security considerations for stations.</li> </ul> <p>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<p><h4>Job description</h4> <p><strong>Job role - Principal Engineer – Electrical – Metro Stations</strong><br> Verbal and written communication in English is mandatory.</p> <h4>Responsibilities:</h4> <ul> <li>Lead multi-disciplinary station electrical design: LV/MV building distribution, protection/coordination, earthing & bonding, lightning protection, standby generators & UPS, lighting & controls, across underground, at-grade, and elevated stations.</li> <li>Own the full design lifecycle: requirements capture, basis-of-design, load studies, selectivity/arc-flash reviews, single-lines, schematics, cable schedules, layouts, specs/BOQs, and employer’s requirements. Provide construction support as needed.</li> <li>Apply rail-specific life-safety standards in stations: e.g., NFPA 130 for fixed guideway transit (egress, fire protection, emergency ventilation & control/communications); coordinate with fire/life-safety, ventilation and architectural teams.</li> <li>Design compliant emergency lighting to EN 1838/BS 5266 (escape route, open-area, high-risk task) and produce photometric calculations & layouts (Dialux/Relux).</li> <li>Engineer EMC & earthing interfaces to EN 50121 (railway EMC) and EN 50122-1 (earthing/bonding for fixed installations) and manage interfaces with signaling/telecom/PSD.</li> <li>Coordinate digitally in BIM (Revit/Navisworks) with architecture, structural and MEP; run design reviews, clash prevention and interface matrices.</li> <li>Lead authority approvals (Saudi & UAE Civil Defence and utilities), support client/stakeholder workshops, value engineering and risk registers.</li> <li>Mentor and manage a team of designers; review deliverables, uphold QA/QC; contribute to proposal writing and level-of-effort estimates.</li> </ul> <h4>Qualifications:</h4> <ul> <li>Bachelor’s or Master’s degree in Electrical Engineering.</li> <li>Professional registration (e.g., CEng/PE) strongly preferred.</li> <li>12–18+ years in building/station electrical design with major rail/metro station projects; GCC experience strongly preferred.</li> <li>Strong grasp of NFPA 130, EN 1838/BS 5266 (emergency lighting), EN 50121/EN 50122 (EMC/earthing), BS 7671/IET Wiring Regs or NEC, and typical rail authority requirements.</li> <li>Fluency with ETAP/Amtech, Dialux/Relux, AutoCAD/Revit, and BIM coordination; familiarity with SCADA/BMS interfaces for station systems.</li> <li>Excellent interface management, stakeholder communication and team leadership skills.</li> </ul> <h4>Nice to have:</h4> <ul> <li>Experience integrating station electrical design with PSD, tunnel ventilation controls, SCS/OCS interfaces, and evacuation strategies per NFPA 130.</li> <li>Past authority liaison in KSA (RCRC/SDAIA utilities/Civil Defense).</li> <li>RAMS exposure (EN 50126/8/9) and cyber/physical security considerations for stations.</li> </ul> <p>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Supports an aircraft ground equipment (AGE) shop in a medium to large-sized military aircraft flying organization. Ensures the timely and proper performance of scheduled and unscheduled maintenance on AGE equipment and light support vehicles. Inspects, tests, and operates AGE to determine equipment serviceability and proper operation. Diagnoses mechanical and electrical circuitry malfunctions. Interprets drawings, wiring diagrams, schematics, and technical data to facilitate repairs and/or modifications to ground support equipment.</p> <p>Identifies appropriate replacement parts in TOs and technical documents and orders those parts. Removes, disassembles, repairs, cleans, treats for corrosion, assembles, and re-installs AGE accessories and components. Stencils and marks AGE as appropriate. Services equipment with fuel, oil, coolant, water, hydraulic fluid, and air as required. Operates, cleans, inspects, and services AGE tow vehicles. Maintains and documents AGE equipment and tow vehicle forms. Positions equipment to support aircraft maintenance and flying operations. Schedules PMIs as required. Adheres to safety procedures and follows technical orders as applicable.</p> <p>USAF equivalent position is AGE Mechanic Apprentice.</p> <h4>Essential responsibilities</h4> <p>Maintains external fuel and grounding systems; performs scheduled and unscheduled maintenance on GSE; inspects, tests, and operates GSE to determine equipment serviceability and proper operation; services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air; diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications.</p> <p>Disassembles and assembles malfunctioning basic GSE accessories and components; removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories; stencils and marks GSE in accordance with technical publications; stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations.</p> <p>Prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles.</p> <p>Assists in maintaining vehicle records and assists with updating paper and electronic equipment records; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations; practices good housekeeping, tool control, foreign object damage prevention, and safety at all times.</p> <p>Performs all other duties as assigned or requested.</p> <h4>Minimum requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one-year actual AGE maintenance experience required.</li> <li>Must be qualified with most basic types and uses of AGE equipment.</li> <li>Must be familiar with diesel engine maintenance and repair, and HVAC maintenance and repair at the basic level.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Vehicle operator training.</li> <li>AGE mechanic experience within the last 10 years.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Supports an aircraft ground equipment (AGE) shop in a medium to large-sized military aircraft flying organization. Ensures the timely and proper performance of scheduled and unscheduled maintenance on AGE equipment and light support vehicles. Inspects, tests, and operates AGE to determine equipment serviceability and proper operation. Diagnoses mechanical and electrical circuitry malfunctions. Interprets drawings, wiring diagrams, schematics, and technical data to facilitate repairs and/or modifications to ground support equipment.</p> <p>Identifies appropriate replacement parts in TOs and technical documents and orders those parts. Removes, disassembles, repairs, cleans, treats for corrosion, assembles, and re-installs AGE accessories and components. Stencils and marks AGE as appropriate. Services equipment with fuel, oil, coolant, water, hydraulic fluid, and air as required. Operates, cleans, inspects, and services AGE tow vehicles. Maintains and documents AGE equipment and tow vehicle forms. Positions equipment to support aircraft maintenance and flying operations. Schedules PMIs as required. Adheres to safety procedures and follows technical orders as applicable.</p> <p>USAF equivalent position is AGE Mechanic Apprentice.</p> <h4>Essential responsibilities</h4> <p>Maintains external fuel and grounding systems; performs scheduled and unscheduled maintenance on GSE; inspects, tests, and operates GSE to determine equipment serviceability and proper operation; services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air; diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications.</p> <p>Disassembles and assembles malfunctioning basic GSE accessories and components; removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories; stencils and marks GSE in accordance with technical publications; stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations.</p> <p>Prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles.</p> <p>Assists in maintaining vehicle records and assists with updating paper and electronic equipment records; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations; practices good housekeeping, tool control, foreign object damage prevention, and safety at all times.</p> <p>Performs all other duties as assigned or requested.</p> <h4>Minimum requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one-year actual AGE maintenance experience required.</li> <li>Must be qualified with most basic types and uses of AGE equipment.</li> <li>Must be familiar with diesel engine maintenance and repair, and HVAC maintenance and repair at the basic level.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Vehicle operator training.</li> <li>AGE mechanic experience within the last 10 years.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>InSite are urban designers, planners and landscape architects who share a love for the craft of designing the built environment and consist of a diverse studio of designers from around the world. We are a diverse studio of designers from around the world with studios in Abu Dhabi, Dubai and Doha. InSite is a unique division of KEO International Consultants, a firm with over a half century of delivering projects throughout the Gulf and a proud legacy to match. We engage at the human scale when creating our places. Each is interrogated from a collaborative viewpoint, tailored to client s needs and ensuring sensitivity to the unique ecologies, cultures and the communities that we engage with.</p><p>Our newest opportunity is for a talented Senior/Lead Electrical Design Engineer to join our team based in Amman, Jordan. This critical role will work as part of the InSite team, developing electric designs across major Landscape and Urban projects across different project design stages. We envisage success in this role to include:</p><ul><li>Preparing and reviewing the design of power distribution infrastructure (Medium and Low Voltage distribution).</li><li>Preparing and reviewing the design of lighting design (streetlight).</li><li>Ensuring all calculations are prepared in accordance with the requirements of the Authority Standards and Codes of Practice as per the project location and requirements.</li><li>Coordination and day-to-day coaching to junior staff within this discipline.</li><li>Coordinating and giving technical guidance to CAD Technicians / BIM Technicians to produce drawings and models.</li><li>Preparing and reviewing technical reports, design drawings, and other deliverables.</li><li>Manage the discipline s team.</li><li>Monitoring the technical quality of the projects to ensure that the projects delivered to Clients are of the highest technical quality and engineering practice standard.</li><li>Coordinating with other disciplines to achieve a fully integrated design.</li><li>Liaising with the Client and Authority representatives to obtain design approvals, as necessary.</li><li>Providing discipline s input for technical proposals for submission to external parties.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications</h2><p>To be successful in this dynamic opportunity, we envision that you will have a minimum of a bachelor s degree in Electrical Engineering and more than 10 years of experience in a similar position. Having a membership of a professional institution is desirable. Furthermore, you should demonstrate:</p><ul><li>Proven experience in the infrastructure electric design.</li><li>Experience with Dialux, ETAP and other power systems software is an advantage.</li><li>Proficiency in software such as Autodesk AutoCAD and MS Office.</li><li>Knowledge in BIM and AutoCAD Civil 3D is an advantage.</li><li>Solid written and verbal communication skills in English.</li></ul><p></p></section>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul> <h4>Compensation details:</h4> <p>$34.17 per hour</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting date: 05/06/2026 - Until filled</p> <p>The job requisition is expected to remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>