وظائف مهندس ميكانيكا معدات ثقيلة

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engine in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Journeyman.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic/hydraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work without supervision.</li> <li>Provides technical and directional leadership guidance to lower-level aircraft mechanics.</li> <li>Provides training to lower-level aircraft mechanics.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of three years of actual aircraft mechanic maintenance experience required.</li> <li>Minimum of one year experience on MQ-9 aircraft, as an aircraft mechanic.</li> <li>Must have comprehensive knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess comprehensive knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a comprehensive understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul> <h4>Compensation details:</h4> <p>$36.26 per hour</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Responsibilities:</h4> <p><strong>Lead electrical design</strong> from feasibility and basis of design (BoD) through detailed design, tender, and construction support for aviation facilities.</p> <p><strong>Own the electrical power strategy</strong> for large-scale facilities (e.g., hangar bays): MV/LV distribution, redundancy, load management, earthing, and control philosophies—balancing reliability, safety, and energy performance (IEC/NFPA context).</p> <p><strong>Engineer electrical systems</strong> for hazardous operations: paint booths/rooms, fuel-cell maintenance areas, welding zones—ensuring compliance with ATEX/IECEx and coordination with mechanical ventilation and controls.</p> <p><strong>Design and specify power systems</strong> for aviation facilities: transformers, generators, UPS, distribution boards, and backup systems for mission-critical operations.</p> <p><strong>Integrate electrical utilities</strong> across MRO and workshop environments—ground power units (GPU), PCA interfaces, process equipment loads, and coordination with mechanical, fire/life safety, and control systems.</p> <p><strong>Shape electrical systems</strong> for catering facilities: resilient power distribution for kitchens, cold-chain systems, and hygienic areas aligned with HACCP/ISO 22000 requirements.</p> <p><strong>Deliver BIM-led coordination</strong> (Revit/Navisworks) across architecture, structures, MEP, and specialist systems; lead clash resolution and model QA.</p> <p><strong>Perform calculations and studies:</strong> load estimation, cable sizing, protection coordination, short-circuit analysis, and lighting design.</p> <p><strong>Author technical documents:</strong> BoD, load schedules, single-line diagrams (SLDs), specifications, and commissioning plans.</p> <p><strong>Mentor and review engineers/designers;</strong> lead design reviews, HAZOPs, and constructability/operability workshops.</p> <p><strong>Engage stakeholders</strong>—airlines, MROs, airport operators, and authorities—to secure approvals and ensure smooth delivery.</p> <p><strong>Lead retrofit, refurbishment, and brownfield upgrades</strong> in operational airport environments—assessing existing systems, planning phased upgrades, and integrating new systems with minimal disruption while improving capacity, compliance, and energy performance.</p> <h4>Key systems & domains you’ll cover:</h4> <ul> <li>Hangars & workshops: MV/LV distribution, ground power units (GPU), PCA electrical interfaces, high-bay lighting, emergency power, earthing and bonding for aircraft safety, and hangar door electrics.</li> <li>Paint/corrosion control: hazardous-area electrical systems, explosion-proof equipment, interlocks, LEL monitoring interfaces, and ATEX/IECEx compliance coordinated with ventilation and controls.</li> <li>Welding & fabrication: power distribution for welding equipment, equipment earthing, task lighting, and integration with extraction/LEV systems aligned with OSHA/ACGIH guidance.</li> <li>Power systems: transformers, generators, UPS, LV panels, and distribution networks designed for redundancy, resilience, and mission-critical operations.</li> <li>Catering facilities: resilient power supply for kitchens, cold rooms/freezers, food processing areas, and hygienic zoning aligned with HACCP/ISO 22000 requirements.</li> <li>ELV & controls: fire alarm systems (NFPA 72), ICT, security (CCTV/access control), structured cabling, and BMS/SCADA integration for operational monitoring and control.</li> </ul> <h4>Qualifications:</h4> <ul> <li>Bachelor’s degree in electrical engineering; master’s degree preferred.</li> <li>Professionally registered (CEng, PE, or equivalent).</li> <li>15+ years' experience in electrical building services design, including aviation and complex infrastructure projects.</li> <li>Demonstrated experience leading multidisciplinary design teams and delivering major projects.</li> </ul> <h4>Technical expertise:</h4> <ul> <li>Strong knowledge of international electrical design codes, standards, and aviation requirements.</li> <li>Expertise in MV/LV power distribution, load assessments, protection systems, and earthing design.</li> <li>Proficiency in BIM and industry-standard design software, including Revit, Navisworks, ETAP, and Dialux.</li> <li>Experience in airport facilities, terminal buildings, and aviation-related infrastructure is highly desirable.</li> </ul></p><p></p>

<p><h4>Responsibilities:</h4> <p><strong>Lead electrical design</strong> from feasibility and basis of design (BoD) through detailed design, tender, and construction support for aviation facilities.</p> <p><strong>Own the electrical power strategy</strong> for large-scale facilities (e.g., hangar bays): MV/LV distribution, redundancy, load management, earthing, and control philosophies—balancing reliability, safety, and energy performance (IEC/NFPA context).</p> <p><strong>Engineer electrical systems</strong> for hazardous operations: paint booths/rooms, fuel-cell maintenance areas, welding zones—ensuring compliance with ATEX/IECEx and coordination with mechanical ventilation and controls.</p> <p><strong>Design and specify power systems</strong> for aviation facilities: transformers, generators, UPS, distribution boards, and backup systems for mission-critical operations.</p> <p><strong>Integrate electrical utilities</strong> across MRO and workshop environments—ground power units (GPU), PCA interfaces, process equipment loads, and coordination with mechanical, fire/life safety, and control systems.</p> <p><strong>Shape electrical systems</strong> for catering facilities: resilient power distribution for kitchens, cold-chain systems, and hygienic areas aligned with HACCP/ISO 22000 requirements.</p> <p><strong>Deliver BIM-led coordination</strong> (Revit/Navisworks) across architecture, structures, MEP, and specialist systems; lead clash resolution and model QA.</p> <p><strong>Perform calculations and studies:</strong> load estimation, cable sizing, protection coordination, short-circuit analysis, and lighting design.</p> <p><strong>Author technical documents:</strong> BoD, load schedules, single-line diagrams (SLDs), specifications, and commissioning plans.</p> <p><strong>Mentor and review engineers/designers;</strong> lead design reviews, HAZOPs, and constructability/operability workshops.</p> <p><strong>Engage stakeholders</strong>—airlines, MROs, airport operators, and authorities—to secure approvals and ensure smooth delivery.</p> <p><strong>Lead retrofit, refurbishment, and brownfield upgrades</strong> in operational airport environments—assessing existing systems, planning phased upgrades, and integrating new systems with minimal disruption while improving capacity, compliance, and energy performance.</p> <h4>Key systems & domains you’ll cover:</h4> <ul> <li>Hangars & workshops: MV/LV distribution, ground power units (GPU), PCA electrical interfaces, high-bay lighting, emergency power, earthing and bonding for aircraft safety, and hangar door electrics.</li> <li>Paint/corrosion control: hazardous-area electrical systems, explosion-proof equipment, interlocks, LEL monitoring interfaces, and ATEX/IECEx compliance coordinated with ventilation and controls.</li> <li>Welding & fabrication: power distribution for welding equipment, equipment earthing, task lighting, and integration with extraction/LEV systems aligned with OSHA/ACGIH guidance.</li> <li>Power systems: transformers, generators, UPS, LV panels, and distribution networks designed for redundancy, resilience, and mission-critical operations.</li> <li>Catering facilities: resilient power supply for kitchens, cold rooms/freezers, food processing areas, and hygienic zoning aligned with HACCP/ISO 22000 requirements.</li> <li>ELV & controls: fire alarm systems (NFPA 72), ICT, security (CCTV/access control), structured cabling, and BMS/SCADA integration for operational monitoring and control.</li> </ul> <h4>Qualifications:</h4> <ul> <li>Bachelor’s degree in electrical engineering; master’s degree preferred.</li> <li>Professionally registered (CEng, PE, or equivalent).</li> <li>15+ years' experience in electrical building services design, including aviation and complex infrastructure projects.</li> <li>Demonstrated experience leading multidisciplinary design teams and delivering major projects.</li> </ul> <h4>Technical expertise:</h4> <ul> <li>Strong knowledge of international electrical design codes, standards, and aviation requirements.</li> <li>Expertise in MV/LV power distribution, load assessments, protection systems, and earthing design.</li> <li>Proficiency in BIM and industry-standard design software, including Revit, Navisworks, ETAP, and Dialux.</li> <li>Experience in airport facilities, terminal buildings, and aviation-related infrastructure is highly desirable.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p ><b><u><span>Job Summary</span></u></b></p> <p ><b><span>Arab Potash Company is seeking a dedicated and experienced Chemical Engineer to supervise and manage process engineering activities throughout the project lifecycle, from conceptual studies and FEED to detailed engineering and project execution. The successful candidate will ensure that process engineering deliverables comply with project specifications, contractual requirements, and engineering standards while coordinating effectively with multidisciplinary teams.</span></b></p> <p ><b><span>&nbsp;</span></b><b><u><span>Duties and Responsibilities</span></u></b></p> <ul> <li ><b><span>Perform <span>&nbsp;</span>process engineering activities</span></b></li> <li ><b><span>Supervise and manage process engineering activities throughout the project lifecycle (conceptual design, FEED, detailed design, and execution).</span></b></li> <li ><b><span>Coordinate with internal teams, including Process, Production, Mechanical, Electrical, Instrumentation, and Safety, to ensure alignment with project requirements.</span></b></li> <li ><b><span>Review engineering deliverables prepared by contractors and consultants to ensure technical accuracy, completeness, and compliance.</span></b></li> <li ><b><span>Ensure that all process engineering documents comply with project specifications, contractual requirements, and applicable engineering standards.</span></b></li> <li ><b><span>Maintain accurate documentation and implement effective version control for all process engineering deliverables throughout the project phases.</span></b></li> <li ><b><span>Support project execution by providing technical guidance and resolving process engineering issues as required.</span></b></li> </ul> &nbsp; &nbsp; </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 7+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engine in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Journeyman.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic/hydraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work without supervision.</li> <li>Provides technical and directional leadership guidance to lower-level aircraft mechanics.</li> <li>Provides training to lower-level aircraft mechanics.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of three years of actual aircraft mechanic maintenance experience required.</li> <li>Minimum of one year experience on MQ-9 aircraft, as an aircraft mechanic.</li> <li>Must have comprehensive knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess comprehensive knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a comprehensive understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul> <h4>Compensation details:</h4> <p>$36.26 per hour</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br><strong>KEY ACCOUNTABILITIES: (Identify 6 to 8 main things that the job holder must do to make sure that the main purpose of the role is met. These should be the things that need to be done and/or the services that need to be provided. Describe what is done and why rather than how.)</strong> <p>Description</p> <p>Performance Indicators</p> <p> <strong>Policies &amp; Procedures</strong> </p> <ul> <li>Ensure compliance with approved engineering, maintenance, GMP, GEP, and safety procedures.</li> <li>Support implementation and continuous improvement of utilities and BMS-related SOP</li> </ul> <ul> <li>Adherence to policies, processes, and procedures.</li> </ul> <p> <strong>Day to day operations</strong> </p> <ul> <li>Supervise daily operation and maintenance activities of utilities systems, including BMS, HVAC, water treatment, compressed air, and associated infrastructure.</li> <li>Monitor utilities performance and ensure uninterrupted services to production and support area</li> </ul> <ul> <li>Smooth flow of day-to-day operations.</li> </ul> <p> <strong>Safety, Quality &amp; Environment</strong> </p> <ul> <li>Ensure compliance with GMP, GEP, engineering standards, and EHS requirements.</li> <li> Support internal and external audits.</li> <li> Maintain complete and accurate utilities and BMS documentation.</li> <li>Ensure safe execution of all utilities-related activities.</li> </ul> <ul> <li>Audit findings.</li> <li>Safety incidents.</li> <li>Documentation compliance rate.</li> </ul> <p> </p> <p> </p> <p> <strong>Job Related Special Accountabilities</strong> </p> <ul> <li>Supervise the operation, monitoring, and maintenance of utilities systems including HVAC, water treatment, compressed air, and Building Management System (BMS).</li> <li>Monitor BMS alarms, trends, and system performance, ensuring timely response to abnormalities and implementation of corrective actions.</li> <li>Analyze utilities performance data and BMS reports to identify opportunities for improving reliability, efficiency, and energy consumption.</li> <li>Coordinate with automation and BMS service providers for troubleshooting, upgrades, modifications, and system optimization.</li> <li>Follow up and verify completion of preventive and corrective maintenance activities for utilities equipment and BMS-integrated systems.</li> <li>Conduct daily inspections, equipment performance reviews, and utilities operational checks to ensure compliance with operational requirements.</li> <li>Participate in root cause analysis (RCA) investigations related to utilities failures and implement corrective and preventive actions (CAPA).</li> <li>Ensure proper documentation of utilities operations, maintenance records, BMS events, deviations, and engineering activities in compliance with GMP requirements.</li> <li>Participate in qualification activities (IQ/OQ), commissioning, and validation support for utilities systems and related equipment.</li> <li>Initiate and follow up change controls associated with utilities, automation, and BMS systems.</li> <li>Monitor critical spare parts inventory, define reorder levels, and coordinate procurement activities to maintain system reliability.</li> <li>Support internal and external audits related to utilities, engineering systems, energy management, and GMP compliance.</li> <li>Prepare utilities performance reports, energy consumption reports, and BMS trend analyses for management review.</li> <li>Participate in utilities-related projects, equipment selection, design reviews, and preparation of User Requirement Specifications (URS).</li> <li>Support implementation of energy management initiatives and monitor Energy Performance Indicators (EnPIs) to achieve energy-saving objectives.</li> <li>Ensure all utilities activities are performed in accordance with safety, quality, environmental, GMP, and engineering standards.</li> <li>Perform any additional duties assigned by the Facilities &amp; Utilities Manager.</li> </ul> <ul> <li>Adherence to maintenance procedures and policies.</li> <li>Day to day operation implementation</li> </ul> <p> <br> <br> </p> <strong>6. QUALIFICATIONS, EXPERIENCE, &amp; SKILLS Please ensure that the minimum requirements are the ones essential<u> </u>for undertaking the role:</strong> <p> <strong>QUALIFICATIONS</strong> </p> <ul> <li>BSC engineering in the disciplines (Mechanical Electrical or Mechatronics) </li> </ul> <p> <strong>EXPERIENCE</strong> </p> <ul> <li>(5-8) years of experience in utilities and projects.</li> </ul> <p> </p></div></section>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions, or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Journeyman.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work without supervision.</li> <li>Provides technical and directional leadership guidance to lower-level aircraft mechanics.</li> <li>Provides training to lower-level aircraft mechanics.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of three years of actual aircraft mechanic maintenance experience required.</li> <li>Minimum of one year experience on MQ-9 aircraft, as an aircraft mechanic.</li> <li>Must have comprehensive knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess comprehensive knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a comprehensive understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry, and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Job summary</h4> <p>Assists department head in managing budget, capital expenditures, preventative maintenance and energy conservation. Accountable for maintaining the building and grounds with particular attention towards safety, security and asset protection. Assigns, tracks and follows up on status of work assigned to staff and contractors. Helps to increase guest and employee satisfaction through effective communications and training.</p> <h4>Candidate profile</h4> <p><strong>Education and experience</strong></p> <ul> <li>High school diploma or GED; 4 years experience in the engineering and maintenance or related professional area; technical training in HVAC-R/electrical/plumbing.</li> <li>OR</li> <li>2-year degree from an accredited university in Building and Construction, Engineering, Mechanics, or related major; 2 years experience in the engineering and maintenance or related professional area; technical training in HVAC-R/electrical/plumbing.</li> </ul> <h4>Core work activities</h4> <p><strong>Supporting management of property operations</strong></p> <ul> <li>Supervises distribution of repair work orders.</li> <li>Ensures property policies are administered fairly and consistently.</li> <li>Assists in effectively planning, scheduling and evaluating preventative maintenance programs.</li> <li>Establishes and maintains open, collaborative relationships with employees.</li> <li>Monitors timeliness and quality of completion of repair work orders.</li> <li>Supervises engineering and related areas in absence of the Director of Engineering.</li> <li>Assists in managing the physical plant including equipment, refrigeration, HVAC, plumbing, water treatment, electrical and life safety systems.</li> <li>Ensures that regular ongoing communication occurs with employees in order to create awareness of business objectives, communicate expectations and recognize performance.</li> <li>Recommends or arranges for additional services such as painting, repair work, renovations, and the replacement of furnishings and equipment.</li> <li>Selects and orders or purchases new equipment, supplies, and furnishings.</li> <li>Supervises the day to day operations of engineering and related departments.</li> </ul> <p><strong>Maintaining property standards</strong></p> <ul> <li>Inspects and evaluates the physical condition of facilities in order to determine the type of work required.</li> <li>Maintains accurate logs and records as required.</li> <li>Operates generators and fire pumps as necessary.</li> <li>Provides emergency response services 24/7.</li> <li>Repairs equipment (e.g., refrigeration, laundry) as necessary.</li> <li>Ensures all employees have the proper supplies, equipment and uniforms.</li> </ul> <p><strong>Ensuring exceptional customer service</strong></p> <ul> <li>Empowers employees to provide excellent customer service.</li> <li>Emphasizes guest satisfaction during all departmental meetings and focuses on continuous improvement.</li> <li>Sets a positive example for guest relations.</li> </ul> <p><strong>Conducting human resources activities</strong></p> <ul> <li>Helps train employees in safety procedures.</li> <li>Supports a departmental orientation program for employees to receive the appropriate new hire training to successfully perform their job.</li> <li>Communicates performance expectations in accordance with job descriptions for each position.</li> <li>Ensures disciplinary procedures and documentation are completed according to standard and local operating procedures (SOPs and LSOPs) and support the peer review process.</li> <li>Assists as needed in the interviewing and hiring of employee team members with the appropriate skills.</li> <li>Participates in the employee performance appraisal process, providing feedback as needed.</li> <li>Uses all available on the job training tools for employees.</li> <li>Solicits employee feedback.</li> <li>Supervises staffing levels to ensure that guest service, operational needs and financial objectives are met.</li> </ul> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand’s unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<p><h4>Job summary</h4> <p>Assists department head in managing budget, capital expenditures, preventative maintenance and energy conservation. Accountable for maintaining the building and grounds with particular attention towards safety, security and asset protection. Assigns, tracks and follows up on status of work assigned to staff and contractors. Helps to increase guest and employee satisfaction through effective communications and training.</p> <h4>Candidate profile</h4> <p><strong>Education and experience</strong></p> <ul> <li>High school diploma or GED; 4 years experience in the engineering and maintenance or related professional area; technical training in HVAC-R/electrical/plumbing.</li> <li>OR</li> <li>2-year degree from an accredited university in Building and Construction, Engineering, Mechanics, or related major; 2 years experience in the engineering and maintenance or related professional area; technical training in HVAC-R/electrical/plumbing.</li> </ul> <h4>Core work activities</h4> <p><strong>Supporting management of property operations</strong></p> <ul> <li>Supervises distribution of repair work orders.</li> <li>Ensures property policies are administered fairly and consistently.</li> <li>Assists in effectively planning, scheduling and evaluating preventative maintenance programs.</li> <li>Establishes and maintains open, collaborative relationships with employees.</li> <li>Monitors timeliness and quality of completion of repair work orders.</li> <li>Supervises engineering and related areas in absence of the Director of Engineering.</li> <li>Assists in managing the physical plant including equipment, refrigeration, HVAC, plumbing, water treatment, electrical and life safety systems.</li> <li>Ensures that regular ongoing communication occurs with employees in order to create awareness of business objectives, communicate expectations and recognize performance.</li> <li>Recommends or arranges for additional services such as painting, repair work, renovations, and the replacement of furnishings and equipment.</li> <li>Selects and orders or purchases new equipment, supplies, and furnishings.</li> <li>Supervises the day to day operations of engineering and related departments.</li> </ul> <p><strong>Maintaining property standards</strong></p> <ul> <li>Inspects and evaluates the physical condition of facilities in order to determine the type of work required.</li> <li>Maintains accurate logs and records as required.</li> <li>Operates generators and fire pumps as necessary.</li> <li>Provides emergency response services 24/7.</li> <li>Repairs equipment (e.g., refrigeration, laundry) as necessary.</li> <li>Ensures all employees have the proper supplies, equipment and uniforms.</li> </ul> <p><strong>Ensuring exceptional customer service</strong></p> <ul> <li>Empowers employees to provide excellent customer service.</li> <li>Emphasizes guest satisfaction during all departmental meetings and focuses on continuous improvement.</li> <li>Sets a positive example for guest relations.</li> </ul> <p><strong>Conducting human resources activities</strong></p> <ul> <li>Helps train employees in safety procedures.</li> <li>Supports a departmental orientation program for employees to receive the appropriate new hire training to successfully perform their job.</li> <li>Communicates performance expectations in accordance with job descriptions for each position.</li> <li>Ensures disciplinary procedures and documentation are completed according to standard and local operating procedures (SOPs and LSOPs) and support the peer review process.</li> <li>Assists as needed in the interviewing and hiring of employee team members with the appropriate skills.</li> <li>Participates in the employee performance appraisal process, providing feedback as needed.</li> <li>Uses all available on the job training tools for employees.</li> <li>Solicits employee feedback.</li> <li>Supervises staffing levels to ensure that guest service, operational needs and financial objectives are met.</li> </ul> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand’s unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<p><h4>Company description</h4> <p>Join a hotel that is a member of the Accor network, whose group brings together more than 45 brands, 5,500 hotels, 10,000 restaurants and lifestyle destinations. Here, we believe in you and what you bring to the table. There are many opportunities for development and advancement. Every gesture, every smile, every action, contributes to creating a positive and memorable impact for our customers, our colleagues and also for our planet. Together, we embody the vision of responsible hospitality.</p> <p>Take the opportunity to become a Heartist® and let your heart guide you in this world where life beats faster.</p> <h4>Job description</h4> <h4>Job summary:</h4> <p>The Chief Engineer at Movenpick Resort Petra Jordan is responsible for the overall supervision, management, and leadership of the engineering department. This role ensures the smooth operation of all hotel facilities, including mechanical, electrical, plumbing, and HVAC systems. The Chief Engineer plays a crucial role in maintaining the hotel’s safety standards, managing energy efficiency, and providing a high level of service to both internal and external guests.</p> <h4>Key responsibilities:</h4> <p><strong>Leadership and team management:</strong><br> Lead and supervise the engineering team, including recruiting, training, and developing staff to maintain a highly skilled and motivated team.<br> Assign tasks, manage shifts, and oversee daily operations of the engineering department.<br> Provide technical expertise and support for maintenance staff.</p> <p><strong>Maintenance and operations:</strong><br> Oversee all maintenance programs, preventive maintenance, and repairs for all hotel equipment, including HVAC, electrical, plumbing, and fire safety systems.<br> Ensure that all hotel facilities and systems are functioning efficiently and in compliance with safety and regulatory standards.<br> Manage day-to-day operational issues, ensuring quick and efficient problem resolution to minimize downtime and guest inconvenience.</p> <p><strong>Budget and financial management:</strong><br> Prepare and manage the department's budget, including controlling costs related to maintenance, energy consumption, and capital expenditures.<br> Ensure proper inventory control of parts and supplies, as well as efficient energy and water management to optimize operational expenses.<br> Monitor and analyze energy consumption, looking for cost-saving opportunities.</p> <p><strong>Health, safety, and compliance:</strong><br> Ensure all building systems comply with health and safety regulations, including fire safety systems, emergency lighting, and building security.<br> Oversee regular safety inspections and ensure compliance with all local, national, and international standards and regulations.<br> Act as the key contact during emergencies and ensure the safety of guests and employees.</p> <p><strong>Capital projects and renovations:</strong><br> Oversee engineering aspects of capital projects, renovations, and upgrades within the hotel, ensuring work is completed on time and within budget.<br> Collaborate with external contractors and service providers as needed for large-scale projects and technical services.</p> <p><strong>Collaboration with other departments:</strong><br> Work closely with the housekeeping, front office, and food & beverage departments to ensure all guest areas and back-of-house operations are in optimal condition.<br> Assist in setting up rooms, conference facilities, and event spaces when engineering support is needed.<br> Provide timely communication and status updates on engineering tasks to hotel management.</p> <p><strong>Sustainability and environmental initiatives:</strong><br> Develop and implement energy conservation and sustainability initiatives to reduce the hotel's environmental impact.<br> Collaborate with the management team on environmental sustainability efforts, ensuring alignment with the hotel's corporate responsibility policies.</p> <h4>Qualifications</h4> <p><strong>Qualifications:</strong><br> Bachelor's degree in Mechanical, Electrical, Civil Engineering, or a related field.<br> 7+ years of experience in hotel engineering or facilities management, with at least 3 years in a senior engineering leadership role.<br> Strong technical knowledge of building systems, including HVAC, electrical, plumbing, and fire safety.<br> Experience in budgeting, project management, and contractor management.<br> Excellent leadership, communication, and problem-solving skills.<br> Knowledge of sustainability practices and energy management systems is preferred.<br> Familiarity with local regulations, building codes, and safety standards.</p> <p><strong>Competencies:</strong><br> Strong leadership and team management capabilities.<br> Analytical and detail-oriented with excellent organizational skills.<br> Ability to work under pressure and manage multiple priorities.<br> Strong communication and interpersonal skills.<br> Proficiency in relevant software and systems, including BMS (Building Management Systems).</p> <h4>Additional information</h4> <p><strong>Your team and working environment:</strong><br> In 1-2 sentences, introduce the team, property or office environment in a way that reflects the culture.</p> <p><strong>Our commitment to diversity & inclusion:</strong><br> We are an inclusive company and our ambition is to attract, recruit and promote diverse talent.</p></p><p></p>

</span></i></b></span></span></p> <p align="center" ><b><span >Job Opportunity | Mechanical Engineer</span></b><span ></span></p> <p align="center" ><span >Global Entertainment Manufacturer is looking to hire:</span></p> <p align="center" ><b><span >Mechanical Engineer</span></b><span ></span></p> <p ><b><span >Requirements:</span></b><span ></span></p> <p ><span >Bachelor's degree in Mechanical Engineering.</span></p> <p ><b><span >1–3 years of relevant professional experience.</span></b><span ></span></p> <p ><span >Professional proficiency in <b>SolidWorks</b>.</span></p> <p ><span >Ability to create 3D models, mechanical designs, and detailed manufacturing drawings.</span></p> <p ><span >Experience in sheet metal design, fabrication drawings, and production processes.</span></p> <p ><span >Knowledge of manufacturing techniques and materials.</span></p> <p ><span >Strong problem-solving skills and the ability to work under pressure and meet deadlines.</span></p> <p ><span >Strong teamwork and communication skills.</span></p> <p ><span >Experience in entertainment projects, steel structures, decorations, or manufacturing is a plus.</span></p> <p ><b><span >Location:</span></b><span > Amman – Al Shmeisani</span></p> <p align="center" ><span >Please send your CV to:</span></p> <p align="center" ><b><span ><a href="mailto:jobs@gem-jo.com"><span >jobs@gem-jo.com</span></a></span></b></p>

<p><h4>Job summary</h4> <p>Assists department head in managing budget, capital expenditures, preventative maintenance and energy conservation. Accountable for maintaining the building and grounds with particular attention towards safety, security and asset protection. Assigns, tracks and follows up on status of work assigned to staff and contractors. Helps to increase guest and employee satisfaction through effective communications and training.</p> <h4>Candidate profile</h4> <p><strong>Education and experience</strong></p> <ul> <li>High school diploma or GED; 4 years experience in the engineering and maintenance or related professional area; technical training in HVAC-R/electrical/plumbing.</li> <li>OR</li> <li>2-year degree from an accredited university in Building and Construction, Engineering, Mechanics, or related major; 2 years experience in the engineering and maintenance or related professional area; technical training in HVAC-R/electrical/plumbing.</li> </ul> <h4>Core work activities</h4> <p><strong>Supporting management of property operations</strong></p> <ul> <li>Supervises distribution of repair work orders.</li> <li>Ensures property policies are administered fairly and consistently.</li> <li>Assists in effectively planning, scheduling and evaluating preventative maintenance programs.</li> <li>Establishes and maintains open, collaborative relationships with employees.</li> <li>Monitors timeliness and quality of completion of repair work orders.</li> <li>Supervises engineering and related areas in absence of the Director of Engineering.</li> <li>Assists in managing the physical plant including equipment, refrigeration, HVAC, plumbing, water treatment, electrical and life safety systems.</li> <li>Ensures that regular ongoing communication occurs with employees in order to create awareness of business objectives, communicate expectations and recognize performance.</li> <li>Recommends or arranges for additional services such as painting, repair work, renovations, and the replacement of furnishings and equipment.</li> <li>Selects and orders or purchases new equipment, supplies, and furnishings.</li> <li>Supervises the day-to-day operations of engineering and related departments.</li> </ul> <p><strong>Maintaining property standards</strong></p> <ul> <li>Inspects and evaluates the physical condition of facilities in order to determine the type of work required.</li> <li>Maintains accurate logs and records as required.</li> <li>Operates generators and fire pumps as necessary.</li> <li>Provides emergency response services 24/7.</li> <li>Repairs equipment (e.g., refrigeration, laundry) as necessary.</li> <li>Ensures all employees have the proper supplies, equipment and uniforms.</li> </ul> <p><strong>Ensuring exceptional customer service</strong></p> <ul> <li>Empowers employees to provide excellent customer service.</li> <li>Emphasizes guest satisfaction during all departmental meetings and focuses on continuous improvement.</li> <li>Sets a positive example for guest relations.</li> </ul> <p><strong>Conducting human resources activities</strong></p> <ul> <li>Helps train employees in safety procedures.</li> <li>Supports a departmental orientation program for employees to receive the appropriate new hire training to successfully perform their job.</li> <li>Communicates performance expectations in accordance with job descriptions for each position.</li> <li>Ensures disciplinary procedures and documentation are completed according to standard and local operating procedures (SOPs and LSOPs) and support the peer review process.</li> <li>Assists as needed in the interviewing and hiring of employee team members with the appropriate skills.</li> <li>Participates in the employee performance appraisal process, providing feedback as needed.</li> <li>Uses all available on-the-job training tools for employees.</li> <li>Solicits employee feedback.</li> <li>Supervises staffing levels to ensure that guest service, operational needs and financial objectives are met.</li> </ul> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>The Luxury Collection Hotels & Resorts, with over 120 properties in more than 35 countries, offers the promise of authentic experiences that evoke lasting, treasured memories. Our more than 100 years of experience, beginning in 1906 under the Italian CIGA brand – a collection of Europe's most celebrated and iconic properties – serves as a solid foundation as we continuously evolve to exceed the desires of the luxury traveler.</p> <p>From legendary palaces and remote retreats to timeless modern classics, each luxury hotel and resort is a unique and cherished expression of its locale – a portal to the destination’s cultural charms and treasures. If you are someone with an appreciation for evocative storytelling, a keen interest and passion for this destination's heritage, and a desire to deliver genuine, personalized, and anticipatory hospitality, then we invite you on our journey. In joining The Luxury Collection, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>JOB SUMMARY<br>Assists department head in managing budget, capital expenditures, preventative maintenance and energy conservation. Accountable for maintaining the building and grounds with particular attention towards safety, security and asset protection. Assigns, tracks and follows up on status of work assigned to staff and contractors. Helps to increase guest and employee satisfaction through effective communications and training.<br>CANDIDATE PROFILE&nbsp;<br>Education and Experience<br>• High school diploma or GED; 4 years experience in the engineering and maintenance or related professional area; technical training in HVAC-R/electrical/plumbing.<br>OR<br>• 2-year degree from an accredited university in Building and Construction, Engineering, Mechanics, or related major; 2 years experience in the engineering and maintenance or related professional area; technical training in HVAC-R/electrical/plumbing.<br>CORE WORK ACTIVIITES<br>Supporting management of Property Operations&nbsp;<br>• Supervises distribution of repair work orders.<br>• Ensures property policies are administered fairly and consistently.<br>• Assists in effectively planning, scheduling and evaluating preventative maintenance programs.<br>• Establishes and maintains open, collaborative relationships with employees.<br>• Monitors timeliness and quality of completion of repair work orders.<br>• Supervises Engineering and related areas in absence of the Director of Engineering.<br>• Assists in managing the physical plant including equipment, refrigeration, HVAC, plumbing, water treatment, electrical and life safety systems.<br>• Ensures that regular on-going communication occurs with employees in order to create awareness of business objectives, communicate expectations and recognize performance.<br>• Recommends or arranges for additional services such as painting, repair work, renovations, and the replacement of furnishings and equipment.<br>• Selects and order or purchase new equipment, supplies, and furnishings.<br>• Supervises the day to day operations of Engineering and related departments.<br>Maintaining Property Standards<br>• Inspect and evaluate the physical condition of facilities in order to determine the type of work required.<br>• Maintains accurate logs and records as required.<br>• Operates generators and fire pumps as necessary.<br>• Provides emergency response services 24/7.<br>• Repairs equipment (e.g., refrigeration, laundry) as necessary.<br>• Ensures all employees have the proper supplies, equipment and uniforms.<br>Ensuring Exceptional Customer Service<br>• Empowers employees to provide excellent customer service.<br>• Emphasizes guest satisfaction during all departmental meetings and focuses on continuous improvement.<br>• Sets a positive example for guest relations.<br>Conducting Human Resources Activities<br>• Helps train employees in safety procedures.<br>• Supports a departmental orientation program for employees to receive the appropriate new hire training to successfully perform their job.<br>• Communicates performance expectations in accordance with job descriptions for each position.<br>• Ensures disciplinary procedures and documentation are completed according to Standard and Local Operating Procedures (SOPs and LSOPs) and support the Peer Review Process.<br>• Assists as needed in the interviewing and hiring of employee team members with the appropriate skills.<br>• Participates in the employee performance appraisal process, providing feedback as needed.<br>• Uses all available on the job training tools for employees.<br>• Solicits employee feedback.<br>• Supervises staffing levels to ensure that guest service, operational needs and financial objectives are met.<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand’s unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<p><h4>Job summary</h4> <p>Assists department head in managing budget, capital expenditures, preventative maintenance and energy conservation. Accountable for maintaining the building and grounds with particular attention towards safety, security and asset protection. Assigns, tracks and follows up on status of work assigned to staff and contractors. Helps to increase guest and employee satisfaction through effective communications and training.</p> <h4>Candidate profile</h4> <p><strong>Education and experience</strong></p> <ul> <li>High school diploma or GED; 4 years experience in the engineering and maintenance or related professional area; technical training in HVAC-R/electrical/plumbing.</li> <li>OR</li> <li>2-year degree from an accredited university in Building and Construction, Engineering, Mechanics, or related major; 2 years experience in the engineering and maintenance or related professional area; technical training in HVAC-R/electrical/plumbing.</li> </ul> <h4>Core work activities</h4> <p><strong>Supporting management of property operations</strong></p> <ul> <li>Supervises distribution of repair work orders.</li> <li>Ensures property policies are administered fairly and consistently.</li> <li>Assists in effectively planning, scheduling and evaluating preventative maintenance programs.</li> <li>Establishes and maintains open, collaborative relationships with employees.</li> <li>Monitors timeliness and quality of completion of repair work orders.</li> <li>Supervises Engineering and related areas in absence of the Director of Engineering.</li> <li>Assists in managing the physical plant including equipment, refrigeration, HVAC, plumbing, water treatment, electrical and life safety systems.</li> <li>Ensures that regular ongoing communication occurs with employees in order to create awareness of business objectives, communicate expectations and recognize performance.</li> <li>Recommends or arranges for additional services such as painting, repair work, renovations, and the replacement of furnishings and equipment.</li> <li>Selects and orders or purchases new equipment, supplies, and furnishings.</li> <li>Supervises the day to day operations of Engineering and related departments.</li> </ul> <p><strong>Maintaining property standards</strong></p> <ul> <li>Inspects and evaluates the physical condition of facilities in order to determine the type of work required.</li> <li>Maintains accurate logs and records as required.</li> <li>Operates generators and fire pumps as necessary.</li> <li>Provides emergency response services 24/7.</li> <li>Repairs equipment (e.g., refrigeration, laundry) as necessary.</li> <li>Ensures all employees have the proper supplies, equipment and uniforms.</li> </ul> <p><strong>Ensuring exceptional customer service</strong></p> <ul> <li>Empowers employees to provide excellent customer service.</li> <li>Emphasizes guest satisfaction during all departmental meetings and focuses on continuous improvement.</li> <li>Sets a positive example for guest relations.</li> </ul> <p><strong>Conducting human resources activities</strong></p> <ul> <li>Helps train employees in safety procedures.</li> <li>Supports a departmental orientation program for employees to receive the appropriate new hire training to successfully perform their job.</li> <li>Communicates performance expectations in accordance with job descriptions for each position.</li> <li>Ensures disciplinary procedures and documentation are completed according to Standard and Local Operating Procedures (SOPs and LSOPs) and support the Peer Review Process.</li> <li>Assists as needed in the interviewing and hiring of employee team members with the appropriate skills.</li> <li>Participates in the employee performance appraisal process, providing feedback as needed.</li> <li>Uses all available on the job training tools for employees.</li> <li>Solicits employee feedback.</li> <li>Supervises staffing levels to ensure that guest service, operational needs and financial objectives are met.</li> </ul> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand’s unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<p><h4>Company description</h4> <p>Join a hotel that is a member of the Accor network, whose group brings together more than 45 brands, 5,500 hotels, 10,000 restaurants and lifestyle destinations. Here, we believe in you and what you bring to the table. There are many opportunities for development and advancement. Every gesture, every smile, every action, contributes to creating a positive and memorable impact for our customers, our colleagues and also for our planet. Together, we embody the vision of responsible hospitality.</p> <p>Take the opportunity to become a Heartist® and let your heart guide you in this world where life beats faster.</p> <h4>Job description</h4> <h4>Job summary:</h4> <p>The Chief Engineer at Movenpick Resort Petra Jordan is responsible for the overall supervision, management, and leadership of the engineering department. This role ensures the smooth operation of all hotel facilities, including mechanical, electrical, plumbing, and HVAC systems. The Chief Engineer plays a crucial role in maintaining the hotel’s safety standards, managing energy efficiency, and providing a high level of service to both internal and external guests.</p> <h4>Key responsibilities:</h4> <p><strong>Leadership and team management:</strong><br> Lead and supervise the engineering team, including recruiting, training, and developing staff to maintain a highly skilled and motivated team.<br> Assign tasks, manage shifts, and oversee daily operations of the engineering department.<br> Provide technical expertise and support for maintenance staff.</p> <p><strong>Maintenance and operations:</strong><br> Oversee all maintenance programs, preventive maintenance, and repairs for all hotel equipment, including HVAC, electrical, plumbing, and fire safety systems.<br> Ensure that all hotel facilities and systems are functioning efficiently and in compliance with safety and regulatory standards.<br> Manage day-to-day operational issues, ensuring quick and efficient problem resolution to minimize downtime and guest inconvenience.</p> <p><strong>Budget and financial management:</strong><br> Prepare and manage the department's budget, including controlling costs related to maintenance, energy consumption, and capital expenditures.<br> Ensure proper inventory control of parts and supplies, as well as efficient energy and water management to optimize operational expenses.<br> Monitor and analyze energy consumption, looking for cost-saving opportunities.</p> <p><strong>Health, safety, and compliance:</strong><br> Ensure all building systems comply with health and safety regulations, including fire safety systems, emergency lighting, and building security.<br> Oversee regular safety inspections and ensure compliance with all local, national, and international standards and regulations.<br> Act as the key contact during emergencies and ensure the safety of guests and employees.</p> <p><strong>Capital projects and renovations:</strong><br> Oversee engineering aspects of capital projects, renovations, and upgrades within the hotel, ensuring work is completed on time and within budget.<br> Collaborate with external contractors and service providers as needed for large-scale projects and technical services.</p> <p><strong>Collaboration with other departments:</strong><br> Work closely with the housekeeping, front office, and food & beverage departments to ensure all guest areas and back-of-house operations are in optimal condition.<br> Assist in setting up rooms, conference facilities, and event spaces when engineering support is needed.<br> Provide timely communication and status updates on engineering tasks to hotel management.</p> <p><strong>Sustainability and environmental initiatives:</strong><br> Develop and implement energy conservation and sustainability initiatives to reduce the hotel's environmental impact.<br> Collaborate with the management team on environmental sustainability efforts, ensuring alignment with the hotel's corporate responsibility policies.</p> <h4>Qualifications</h4> <p><strong>Qualifications:</strong><br> Bachelor's degree in Mechanical, Electrical, Civil Engineering, or a related field.<br> 7+ years of experience in hotel engineering or facilities management, with at least 3 years in a senior engineering leadership role.<br> Strong technical knowledge of building systems, including HVAC, electrical, plumbing, and fire safety.<br> Experience in budgeting, project management, and contractor management.<br> Excellent leadership, communication, and problem-solving skills.<br> Knowledge of sustainability practices and energy management systems is preferred.<br> Familiarity with local regulations, building codes, and safety standards.</p> <p><strong>Competencies:</strong><br> Strong leadership and team management capabilities.<br> Analytical and detail-oriented with excellent organizational skills.<br> Ability to work under pressure and manage multiple priorities.<br> Strong communication and interpersonal skills.<br> Proficiency in relevant software and systems, including BMS (Building Management Systems).</p> <h4>Additional information</h4> <p><strong>Your team and working environment:</strong><br> In 1-2 sentences, introduce the team, property or office environment in a way that reflects the culture.</p> <p><strong>Our commitment to diversity & inclusion:</strong><br> We are an inclusive company and our ambition is to attract, recruit and promote diverse talent.</p></p><p></p>

<p>About Maqsam: Maqsam is the leading Arabic AI-powered Contact Center Solution in the MENA region designed to revolutionize customer experience. Leveraging groundbreaking advancements in AI technology, Maqsam has spearheaded accurate Arabic Call Transcription, advanced analytics, and insights, along with unique AI modeling utilizing its in-house designed LLM.</p><p>Your Opportunity: We are seeking a highly experienced Senior Software Engineer to act as a technical pillar within our innovative engineering team. This role is ideal for a high-impact Individual who thrives on autonomy and scale. You will be responsible for driving massive, complex projects from conceptualization and architectural design all the way to implementation, deployment, and landing. You will operate at a high level, providing technical leadership across multiple teams. By working closely with product managers, leadership, and engineers across the company, you will shape our technical strategy, tackle our most difficult scaling challenges, and continuously broaden the capabilities of our cutting-edge AI and contact center solutions.</p><p>Your Top Responsibilities:</p><ul><li>End-to-End Ownership: Drive massive, cross-functional engineering projects from raw concept to successful production deployment and monitoring.</li><li>Architectural Leadership: Lead the design and architecture of highly available, scalable, and robust systems, services, and databases that span across multiple engineering teams.</li><li>Technical Force Multiplier: Set the standard for engineering excellence. Conduct rigorous code reviews, establish best practices, and improve our development and deployment pipelines and strategies.</li><li>Complex Problem Solving: Debug, profile, and troubleshoot the most complex systemic and performance issues within a high-concurrency, real-time SaaS environment.</li><li>Cross-Team Alignment: Act as a technical anchor, collaborating with various squads to ensure architectural consistency, and the strategic reduction of technical debt.</li><li>Mentorship: Elevate the entire engineering team by mentoring mid-level and junior engineers, guiding their technical growth, and helping ramp up new joiners.</li></ul><p>What We Expect from You:</p><ul><li>5+ years of software engineering experience , with a heavy focus on backend or full-stack development in a high-scale SaaS environment.</li><li>Elite Independent Contributor Capabilities: Proven track record of independently leading large-scale technical initiatives and delivering production-ready, highly optimized software.</li><li>Deep Architectural Knowledge: Advanced expertise in system design, distributed systems, caching strategies, and API design optimized for high availability.</li><li>Database Mastery: Extensive experience with relational databases (e.g., PostgreSQL), including schema design, query optimization, and handling data at scale.</li><li>Operational Excellence: Strong foundational knowledge of cloud infrastructure, observability, and deploying robust features.</li><li>Adaptability: A proven ability to rapidly learn, evaluate, and integrate bleeding-edge technologies and frameworks.</li></ul><p>Additional Information (Added Advantages):</p><ul><li>Leadership &amp; Management: While this is highly suited for an Individual Contributor, previous experience in engineering management, formal Tech Lead roles, or people management is a strong plus .</li><li>Domain Experience: Experience working on VoIP-related projects (WebRTC, SIP, etc.) or real-time communication platforms is a strong plus.</li><li>Stack Alignment: Deep expertise with Ruby on Rails (or similar frameworks), JavaScript/Vue.js (or comparable frontend frameworks), and PostgreSQL is preferred.</li><li>AI/LLM Exposure: Experience integrating or building around Large Language Models, machine learning pipelines, or data-heavy applications.</li><li>Education: A degree in Computer Science, Engineering, or a related field is preferred.</li></ul><p>What We Provide:</p><ul><li>Join a world-class team at Maqsam, where your growth is our priority. Here s what you can expect:</li><li>High-Impact Work: The autonomy to drive massive projects that directly impact our core business and thousands of users.</li><li>A Collaborative and Friendly Environment: Work with talented, seasoned professionals who are passionate about what they do.</li><li>Personal and Professional Growth: Opportunities to learn, lead, and cement yourself as a world-class engineering leader.</li><li>Fair Compensation: We deeply value your contribution and expertise.</li><li>Transparency: A culture that thrives on open communication and flat technical discussions.</li><li>Benefits: First-class health insurance, and more.</li><li>Part of Something Big: Be proud of being part of the most exciting AI-powered SaaS business in the MENA region.</li></ul><p>Ready to lead at Maqsam? Apply now! #LI-DNI</p><p><strong>Desired Candidate Profile</strong></p><ul><li>5+ years of software engineering experience , with a heavy focus on backend or full-stack development in a high-scale SaaS environment.</li><li>Elite Independent Contributor Capabilities: Proven track record of independently leading large-scale technical initiatives and delivering production-ready, highly optimized software.</li><li>Deep Architectural Knowledge: Advanced expertise in system design, distributed systems, caching strategies, and API design optimized for high availability.</li><li>Database Mastery: Extensive experience with relational databases (e.g., PostgreSQL), including schema design, query optimization, and handling data at scale.</li><li>Operational Excellence: Strong foundational knowledge of cloud infrastructure, observability, and deploying robust features.</li><li>Adaptability: A proven ability to rapidly learn, evaluate, and integrate bleeding-edge technologies and frameworks.</li></ul><p>Additional Information (Added Advantages):</p><ul><li>Leadership &amp; Management: While this is highly suited for an Individual Contributor, previous experience in engineering management, formal Tech Lead roles, or people management is a strong plus .</li><li>Domain Experience: Experience working on VoIP-related projects (WebRTC, SIP, etc.) or real-time communication platforms is a strong plus.</li><li>Stack Alignment: Deep expertise with Ruby on Rails (or similar frameworks), JavaScript/Vue.js (or comparable frontend frameworks), and PostgreSQL is preferred.</li><li>AI/LLM Exposure: Experience integrating or building around Large Language Models, machine learning pipelines, or data-heavy applications.</li><li>Education: A degree in Computer Science, Engineering, or a related field is preferred.</li></ul>

<p><h4>Job role - principal electrical design engineer – mission critical (data centres)</h4> <p>Verbal and written communication in English is mandatory.</p> <p><strong>Strong experience</strong></p> <ul> <li>Uptime Tier III/IV data center design experience</li> <li>MV/LV, UPS & generator design expertise</li> <li>Data center standards knowledge (Uptime/TIA-942/NFPA)</li> <li>Client-facing leadership and stakeholder management experience</li> </ul> <p><strong>Responsibilities</strong></p> <ul> <li>Translate client requirements into robust electrical designs, including electrical distribution (medium and low voltage), generator, UPS systems, switchgear, busducts, grounding schemes, power monitoring systems, fire detection and alarm system etc.</li> <li>Produce all technical documentation: calculations, system studies, single-line diagrams, layout drawings, specifications, block schematics, and compliance tables.</li> <li>Lead conceptual and detailed design reviews, leveraging advanced analytical tools, BIM/Revit models, and coordination with architectural, mechanical, and building technology disciplines.</li> <li>Mentor and develop junior engineers, share best practices in mission-critical electrical systems, and drive continuous improvement across the design team.</li> <li>Collaborate closely with regional and global teams to grow consulting capabilities and ensure alignment with global design standards.</li> <li>Develop and standardize scalable, repeatable data center solutions to drive consistency and efficiencies across UAE and KSA.</li> <li>Conduct site assessments, capacity planning, and feasibility studies aligned with Uptime Institute Tier requirements.</li> <li>Ensure compliance with international standards (Uptime Institute, TIA-942, NFPA, ASHRAE) and local regulations.</li> <li>Drive business growth by contributing to technical proposals, client presentations, and by identifying opportunities for service enhancements.</li> </ul> <p><strong>Qualifications</strong></p> <ul> <li>Bachelor’s or master’s degree in electrical engineering.</li> <li>10+ years of progressive electrical experience in planning, designing, and delivering large-scale data centers, including multiple Uptime Tier III/IV projects.</li> <li>Demonstrated ability to coordinate with stakeholders in complex, matrixed environments.</li> <li>Professional certifications such as Uptime Tier Certified Professional, PMP, LEED AP, or BICSI RCDD are highly desirable.</li> <li>In-depth knowledge of data centres electrical infrastructure, power distribution topologies, servers, storage, network systems, SCADA systems, power management, ELV, and security.</li> <li>Experienced in data center construction phasing and associated design planning.</li> <li>Strong communication skills for effective client presentations, stakeholder workshops, and cross-functional coordination.</li> <li>Familiarity with local and international codes and standards, including NEC, IEC, ISO 50001, ISO 27001, PDPL, and ESMA.</li> </ul> <p>With over 90 years' combined experience, NES Fircroft is proud to be the world's leading engineering staffing provider spanning the oil & gas, power & renewables, chemicals, construction & infrastructure, life sciences, mining and manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<p><h4>Job role - principal electrical design engineer – mission critical (data centres)</h4> <p>Verbal and written communication in English is mandatory.</p> <p><strong>Strong experience</strong></p> <ul> <li>Uptime Tier III/IV data center design experience</li> <li>MV/LV, UPS & generator design expertise</li> <li>Data center standards knowledge (Uptime/TIA-942/NFPA)</li> <li>Client-facing leadership and stakeholder management experience</li> </ul> <p><strong>Responsibilities</strong></p> <ul> <li>Translate client requirements into robust electrical designs, including electrical distribution (medium and low voltage), generator, UPS systems, switchgear, busducts, grounding schemes, power monitoring systems, fire detection and alarm system etc.</li> <li>Produce all technical documentation: calculations, system studies, single-line diagrams, layout drawings, specifications, block schematics, and compliance tables.</li> <li>Lead conceptual and detailed design reviews, leveraging advanced analytical tools, BIM/Revit models, and coordination with architectural, mechanical, and building technology disciplines.</li> <li>Mentor and develop junior engineers, share best practices in mission-critical electrical systems, and drive continuous improvement across the design team.</li> <li>Collaborate closely with regional and global teams to grow consulting capabilities and ensure alignment with global design standards.</li> <li>Develop and standardize scalable, repeatable data center solutions to drive consistency and efficiencies across UAE and KSA.</li> <li>Conduct site assessments, capacity planning, and feasibility studies aligned with Uptime Institute Tier requirements.</li> <li>Ensure compliance with international standards (Uptime Institute, TIA-942, NFPA, ASHRAE) and local regulations.</li> <li>Drive business growth by contributing to technical proposals, client presentations, and by identifying opportunities for service enhancements.</li> </ul> <p><strong>Qualifications</strong></p> <ul> <li>Bachelor’s or master’s degree in electrical engineering.</li> <li>10+ years of progressive electrical experience in planning, designing, and delivering large-scale data centers, including multiple Uptime Tier III/IV projects.</li> <li>Demonstrated ability to coordinate with stakeholders in complex, matrixed environments.</li> <li>Professional certifications such as Uptime Tier Certified Professional, PMP, LEED AP, or BICSI RCDD are highly desirable.</li> <li>In-depth knowledge of data centres electrical infrastructure, power distribution topologies, servers, storage, network systems, SCADA systems, power management, ELV, and security.</li> <li>Experienced in data center construction phasing and associated design planning.</li> <li>Strong communication skills for effective client presentations, stakeholder workshops, and cross-functional coordination.</li> <li>Familiarity with local and international codes and standards, including NEC, IEC, ISO 50001, ISO 27001, PDPL, and ESMA.</li> </ul> <p>With over 90 years' combined experience, NES Fircroft is proud to be the world's leading engineering staffing provider spanning the oil & gas, power & renewables, chemicals, construction & infrastructure, life sciences, mining and manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<p><h4>Job description</h4> <p><strong>Job role - Senior/Principal MEP Engineer (Building Services)</strong><br> Verbal and written communication in English is mandatory.</p> <p><strong>Strong experience:</strong></p> <ul> <li>8–15 years of mechanical building services design experience</li> <li>Strong HVAC design background</li> <li>Commercial, residential, mixed-use project experience</li> <li>ASHRAE and NFPA knowledge</li> <li>GCC/Middle East project experience</li> </ul> <p><strong>Responsibilities:</strong></p> <ul> <li>Support and deliver mechanical design packages for building services projects</li> <li>Work on HVAC, plumbing, drainage, and fire protection systems</li> <li>Ensure designs comply with international codes (ASHRAE, NFPA, BS) and local authority requirements</li> <li>Contribute to sustainable design solutions, including energy-efficient systems</li> <li>Coordinate with multidisciplinary teams, clients, and contractors</li> <li>Prepare and review technical deliverables</li> <li>Support project delivery from concept through to commissioning</li> </ul> <p><strong>Requirements:</strong></p> <ul> <li>Bachelor’s degree in Mechanical Engineering</li> <li>8–15 years of experience in mechanical building services design</li> <li>Good knowledge of international standards and local authority requirements</li> <li>Experience working on building projects (commercial, residential, mixed-use)</li> <li>Strong coordination and communication skills</li> <li>Middle East experience preferred</li> </ul> <p>With over 90 years' combined experience, NES Fircroft is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining, and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<p><h4>Position summary</h4> <p>Perform minor routine maintenance on property vehicles (i.e., engineering trucks, shuttle vans, electric carts) including checking oil, fluid levels, tire pressure/wear, charging batteries, and replacing spark plugs. Perform preventative maintenance on tools and equipment, including cleaning and lubrication. Maintain proper maintenance inventory and requisition parts and supplies as needed. Maintain daily logs of operation, maintenance, and safety activities, including test results, instrument readings, and details of equipment malfunctions and maintenance work.</p> <p>Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Speak with others using clear and professional language, prepare and review written documents accurately and completely, and answer telephones using appropriate etiquette.</p> <p>Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Visually inspect tools, equipment, or machines (e.g., to identify defects). Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by supervisors.</p> <h4>Preferred qualifications</h4> <p><strong>Education:</strong> Technical, trade, or vocational school degree.</p> <p><strong>Related work experience:</strong> At least 2 years of related work experience.</p> <p><strong>Supervisory experience:</strong> No supervisory experience.</p> <p><strong>License or certification:</strong> None.</p> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>Combining timeless glamour with a vanguard spirit, St. Regis Hotels & Resorts is committed to delivering exquisite experiences at more than 50 luxury hotels and resorts in the best addresses around the world. Beginning with the debut of The St. Regis hotel in New York by John Jacob Astor IV at the dawn of the twentieth century, the brand has remained committed to an uncompromising level of bespoke and anticipatory service for all of its guests, delivered flawlessly by a team of gracious hosts that combine classic sophistication and modern sensibility, as well as our signature Butler Service.</p> <p>We invite you to explore careers at St. Regis. In joining St. Regis, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>