وظائف مهندس ميكانيكا معدات ثقيلة
١٩٣٥ وظائف شاغرة
الأردن - عمّان
<p>تعلن شركة البارودي لصناعة مستلزمات التغليف عن حاجتها لضم كفاءات متميزة لفريقها الفني في قسم "البريفورم" (Preform)، لشغل وظيفة:</p><p> مهندس او فني ميكانيك آلات صناعية لقسم انتاج البريفورم ومهندس او فني ميكانيك لقسم الاغطية</p><p> </p><p><strong>المؤهلات والمتطلبات الفنية:</strong></p><p>الخبرة: خبرة عملية لا تقل عن 6 سنوات في صيانة الماكينات الصناعية.</p><p>المهارات التخصصية: * خبرة عميقة في صيانة وأنظمة الهيدروليك والنيوماتيك (Hydraulics & Pneumatics).</p><p>مهارة عالية في فك، تركيب، ومعايرة قوالب الحقن (Molds) وصيانتها الدورية.</p><p>القدرة على التعامل مع أنظمة التبريد (Chillers) الملحقة بخطوط الإنتاج.</p><p>تنفيذ برامج الصيانة الوقائية لضمان استمرارية الإنتاج وتقليل الأعطال.</p><p>التعليم: دبلوم فني ميكانيك أو ما يعادلها من خبرة عملية مكثفة.</p><p>الموقع السكني: يفضل سكان المناطق التالية: (الزرقاء، سحاب، مادبا).</p><p> </p><p><strong>المزايا الوظيفية:</strong></p><p>شمول الموظف بالضمان الاجتماعي فور التعيين.</p><p>تأمين المواصلات مؤمن من قبل الشركة.</p><p>بيئة عمل احترافية ومستقرة</p>
جهة العمل غير مُفصح عنها
الأردن
</span></i></b></span></span></p>
<p align="center" dir="RTL" ><b><span >مطلوب وبشكل عاجل لشركة مقاولات في عمان</span></b><b><span dir="LTR" ></span></b></p>
<p align="center" dir="RTL" ><b><span >مهندس كهرباء</span></b><span > بخبرة لا تقل عن سبع سنوات فعليه</span></p>
<p align="center" dir="RTL" ><b><span >مهندس ميكانيك</span></b><span > بخبرة لا تقل عن سبع سنوات فعليه</span></p>
<p align="center" dir="RTL" ><span >على من يجد في نفسه الكفاءة ارسال السيرة الذاتية وشهادات الخبرة الى الايميل التالي</span></p>
<p align="center" dir="RTL" ><b><span ><a href="mailto:ibs.project2025@gmail.com"><span dir="LTR" >ibs.project2025@gmail.com</span></a></span></b><b><span ></span></b></p>
<p align="center" dir="RTL" ><b><span >علما بان التوظيف فوري</span></b></p>
جهة العمل غير مُفصح عنها
الأردن
</span></i></b></span></span></p>
<p align="center" dir="RTL" ><b><span >مطلوب للعمل فوراً بمصنع مشروبات غازية - القسطل</span></b><b><span dir="LTR" ></span></b></p>
<p dir="RTL" ><span >الموقع: القسطل | مواصلات + وجبة غداء مؤمنة<span dir="LTR" ></span></span></p>
<p align="center" dir="RTL" ><b><span >مهندس ميكانيك | خبرة 5 سنوات فما فوق</span></b><b><span dir="LTR" ></span></b></p>
<p align="center" dir="RTL" ><span >الإشراف على خط التعبئة كامل، صيانة وقائية <span dir="LTR" >PM<span >، مشاريع تطوير، تطبيق <span dir="LTR" >GMP + ISO 22000</span></span></span></span></p>
<p align="center" dir="RTL" ><span >المؤهل: بكالوريوس هندسة ميكانيك + إنجليزي<span dir="LTR" ></span></span></p>
<p align="center" dir="RTL" ><b><span >فني ميكانيك | خبرة سنة فما فوق</span></b><b><span dir="LTR" ></span></b></p>
<p align="center" dir="RTL" ><span >صيانة ماكينات النفخ والليبل والكرتونر، تبديل رولمان وسيور، تشحيم، صيانة وقائية<span dir="LTR" ></span></span></p>
<p align="center" dir="RTL" ><span >المؤهل: دبلوم ميكانيك أو خبرة. دوام ورديات<span dir="LTR" ></span></span></p>
<p align="center" dir="RTL" ><b><span >فني خدمات | مصنع</span></b><b><span dir="LTR" ></span></b></p>
<p align="center" dir="RTL" ><span >لحام، سباكة، كهرباء خفيفة، مضخات، ضواغط هواء، تبريد، سلامة، نظافة صناعية <span dir="LTR" >CIP</span></span></p>
<p align="center" dir="RTL" ><span >المؤهل: شهادة مهنية أو خبرة 1-3 سنوات<span dir="LTR" ></span></span></p>
<p align="center" dir="RTL" ><b><span >المزايا للجميع: ضمان اجتماعي + مواصلات + وجبة غداء</span></b><b><span dir="LTR" ></span></b></p>
<p align="center" dir="RTL" ><b><span >التقديم: واتساب 0777680085</span></b><b><span dir="LTR" ></span></b></p>
<p align="center" dir="RTL" ><b><span ><a href="mailto:hrsfa2002@outlook.com"><span dir="LTR" >hrsfa2002@outlook.com</span></a></span></b><b><span dir="LTR" ></span></b></p>
جهة العمل غير مُفصح عنها
الأردن
</span></i></b></span></span></p>
<p align="center" dir="RTL" ><b><span >تعلن شركة غذائية تعمل في مجال صناعة المنتجات الغذائية – مقرها الجيزة– عن حاجتها لتعيين</span></b><b><span dir="LTR" >:</span></b></p>
<p align="center" dir="RTL" ><b><span >مهندس خط تترباك</span></b><b><span dir="LTR" ></span></b></p>
<p dir="RTL" ><b><span >المهام والمسؤوليات</span></b><b><span dir="LTR" >:</span></b></p>
<p dir="RTL" ><span >-<span > <span >تشغيل آلات التعبئة (تترباك) وضبط إعداداتها بما يتوافق مع خطة الإنتاج<span dir="LTR" >.</span></span></span></span></p>
<p dir="RTL" ><span >-<span > <span >متابعة سير عمليات التعبئة والتغليف والتأكد من سلامة المنتج النهائي<span dir="LTR" >.</span></span></span></span></p>
<p dir="RTL" ><span >-<span > <span >إجراء الفحوصات اليومية للماكينة والتأكد من جاهزيتها للتشغيل<span dir="LTR" >.</span></span></span></span></p>
<p dir="RTL" ><span >-<span > <span >التعامل مع المشكلات الفنية البسيطة أثناء التشغيل، وإبلاغ قسم الصيانة بالمشكلات التي تتطلب تدخلاً فنياً<span dir="LTR" >.</span></span></span></span></p>
<p dir="RTL" ><span >-<span > <span >توثيق البيانات التشغيلية، بما في ذلك كميات الإنتاج والأعطال والتوقفات<span dir="LTR" >.</span></span></span></span></p>
<p dir="RTL" ><span >-<span > <span >الالتزام بتعليمات وإجراءات الجودة والصحة والسلامة المهنية<span dir="LTR" >.</span></span></span></span></p>
<p dir="RTL" ><span >-<span > <span >التعاون مع فرق العمل المختلفة لضمان استمرارية وسلاسة العملية الإنتاجية<span dir="LTR" >.</span></span></span></span></p>
<p dir="RTL" ><span >-<span > <span >المحافظة على نظافة الماكينات وموقع العمل بشكل عام<span dir="LTR" >.</span></span></span></span></p>
<p dir="RTL" ><b><span >المؤهلات والخبرات المطلوبة</span></b><b><span dir="LTR" >:</span></b></p>
<p dir="RTL" ><span >-<span > <span >درجة البكالوريوس أو ما يعادلها، ويفضل تخصص هندسة ميكانيك، كهرباء أو ميكاترونكس<span dir="LTR" >.</span></span></span></span></p>
<p dir="RTL" ><span >-<span > <span >خبرة لا تقل عن سنة في تشغيل ماكينات تترباك أو آلات تعبئة مشابهة، ويفضل في قطاع الصناعات الغذائية<span dir="LTR" >.</span></span></span></span></p>
<p dir="RTL" ><span >-<span > <span >يرحب بالخريجين الجدد ممن لديهم الرغبة والقدرة على التعلم والتطور<span dir="LTR" >.</span></span></span></span></p>
<p dir="RTL" ><span >-<span > <span >معرفة أساسية بمبادئ الصيانة الوقائية<span dir="LTR" >.</span></span></span></span></p>
<p dir="RTL" ><span >-<span > <span >القدرة على قراءة وفهم تعليمات التشغيل وضبط الماكينات باللغة الإنجليزية<span dir="LTR" >.</span></span></span></span></p>
<p align="center" dir="RTL" ><b><span >للمهتمين، يرجى إرسال السيرة الذاتية على البريد الإلكتروني التالي</span></b><b><span dir="LTR" >:</span></b></p>
<p align="center" dir="RTL" ><b><span dir="LTR" ><a href="mailto:jobsh910@gmail.com">jobsh910@gmail.com</a></span></b></p>
<p align="center" dir="RTL" ><b><span >مع ضرورة ذكر "مهندس خط تترباك" في خانة الموضوع، ولن يتم النظر في الطلبات غير المستوفية للشروط المذكورة أعلاه</span></b><b><span dir="LTR" >.</span></b><b><span dir="LTR" ></span></b></p>
جهة العمل غير مُفصح عنها
الأردن - عمّان
<p>مطلوب مهندس ومهندسة مبيعات او من له خبرة للعمل في شركة كهرباء صناعية وانارة لدى فروع الشركة في عمان,اربد,الزرقاء</p>
الأردن - عمّان
<p>#مطلوب #مهندس انتاج للعمل في شركة فاكهة السماء للتجارة التي تقع مقابل السوق المركزي داخل مجمع السبيل التجاري </p><p>الشروط الوظيفة : </p><p>المسؤوليات</p><p>- تشغيل ومتابعة خطوط الانتاج.</p><p>- ادارة العمال داخل صالة الانتاج.</p><p>- ضبط الجودة داخل صالة الانتاج </p><p>- اعداد التقارير اللازمة.</p><p>المؤهلات</p><p>- حاصل على درجة البكالوريوس في الهندسة الكهربائية او ميكاترونكس</p><p>- لديه القدرة على تعامل مع الماكينات الصناعية</p><p>-حديث التخرج او بخبرة عمل من 1-3 سنوات </p><p>المهارات المطلوبة :</p><p>شخصية قيادية </p><p>قدرة على العمل الجماعي </p><p>قدرة على العمل تحت الضغط</p><p>شروط الوظيفة:</p><p>-موقع السكن قريب من مكان العمل </p><p>- الوظيفة مخصصة للذكور فقط</p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p></p>
جهة العمل غير مُفصح عنها
الأردن
</span></i></b></span></span></p>
<p dir="RTL" ><b><span >شركة مقاولات إنشائية تطلب عدد من الموظفين للعمل معها في احدى المشاريع في محافظة معان – الشيدية حسب الشروط التالية: </span></b><b><span dir="LTR" ></span></b></p>
<p align="center" dir="RTL" ><b><span >مهندس موقع</span></b></p>
<p align="center" dir="RTL" ><span >حاصل على شهادة بكالوريوس هندسة مدنية</span></p>
<p align="center" dir="RTL" ><span >بخبرة لا تقل عن 5 سنوات في مجال المقاولات</span></p>
<p align="center" dir="RTL" ><b><span >مراقب فني</span></b></p>
<p align="center" dir="RTL" ><span >حاصل على شهادة دبلوم هندسة مدنية</span></p>
<p align="center" dir="RTL" ><span >بخبرة لا تقل عن 10 سنوات في مجال مقاولات الابنية<span dir="LTR" ></span></span></p>
<p align="center" dir="RTL" ><b><span >على من يجد في نفسه الكفاءة ارسال الشهادات العلمية والعملية والسيرة الذاتية الى الايميل</span></b></p>
<p align="center" dir="RTL" ><span ><a href="mailto:rulafaz9@gmail.com"><b><span dir="LTR" >rulafaz9@gmail.com</span></b></a><b><span ></span></b></span></p>
جهة العمل غير مُفصح عنها
الأردن
</span></i></b></span></span></p>
<p align="center" dir="RTL" ><b><span >تعلن إدارة مصنع مشروبات غازيه في القسطل عن حاجتها لشغل الوظائف التالية</span></b><b><span dir="LTR" >:</span></b></p>
<p align="center" dir="RTL" ><b><span >فني كهرباء صناعي</span></b><b><span dir="LTR" ></span></b></p>
<p dir="RTL" ><span >خبرة لا تقل عن سنة في المصانع أو خطوط الإنتاج<span dir="LTR" ></span></span></p>
<p dir="RTL" ><span >خبرة في صيانة الماكينات، اللوحات الكهربائية، والمحركات<span dir="LTR" ></span></span></p>
<p dir="RTL" ><span >القدرة على العمل على نظام 3 فاز والتحكم <span dir="LTR" >PLC <span >أفضلية<span dir="LTR" ></span></span></span></span></p>
<p align="center" dir="RTL" ><b><span >مهندس كهرباء</span></b><b><span dir="LTR" ></span></b></p>
<p dir="RTL" ><span >بكالوريوس هندسة كهرباء قوى/تحكم<span dir="LTR" ></span></span></p>
<p dir="RTL" ><span >خبرة سنة فأكثر في المصانع الغذائية أو خطوط الإنتاج<span dir="LTR" ></span></span></p>
<p dir="RTL" ><span >إجادة قراءة المخططات الكهربائية وبرنامج <span dir="LTR" >AutoCAD</span></span></p>
<p dir="RTL" ><span >معرفة بأنظمة <span dir="LTR" >ATS<span >،<span dir="LTR" ></span></span></span></span></p>
<p align="center" dir="RTL" ><b><span >للتواصل واتساب فقط على الرقم: 0777680085</span></b><b><span dir="LTR" ></span></b></p>
<p align="center" dir="RTL" ><b><span >او على الايميل:</span></b></p>
<p align="center" dir="RTL" ><a href="mailto:hrsfa2002@outlook.com"><b><span dir="LTR" >hrsfa2002@outlook.com</span></b></a><b><span dir="LTR" ></span></b></p>
toto
الأردن
</span></i></b></span></span></p>
<p dir="RTL" ><b><span >مطلوب </span></b><b><span >مهندس أنظمة أمنية</span></b><b><span > ضمن الشروط التالية:</span></b><b><span dir="LTR" ></span></b></p>
<p dir="RTL" ><span >-<span > <span >حاصل على درجة البكالوريوس في هندسة الميكاترونكس أو الهندسة الكهربائية (حاسوب أو اتصالات) أو ما يعادلها<span dir="LTR" >.<span ></span></span></span></span></span></p>
<p dir="RTL" ><span >-<span > <span >خبرة عملية لا تقل عن 5 سنوات في مجال ذي صلة<span dir="LTR" >.<span dir="LTR" ></span></span></span></span></span></p>
<p dir="RTL" ><span >-<span > <span >معرفة جيدة بأساسيات التحكم الكهربائي وأنظمة الحماية وطرق صيانة واستكشاف الأعطال في اللوحات الكهربائية.<span dir="LTR" ></span></span></span></span></p>
<p dir="RTL" ><span >-<span > <span >معرفة عامة في شبكات الحاسوب (<span dir="LTR" >Networking Topology<span >) والبنية التحتية لتكنولوجيا المعلومات (<span dir="LTR" >IT Infrastructure<span >).<span dir="LTR" ></span></span></span></span></span></span></span></span></p>
<p dir="RTL" ><span >-<span > <span >جيد في التعامل مع أنظمة <span dir="LTR" >SCADA<span > و <span dir="LTR" >HMI<span >.<span dir="LTR" ></span></span></span></span></span></span></span></span></p>
<p dir="RTL" ><span >-<span > <span >إجادة قراءة المخططات الكهربائية.<span dir="LTR" ></span></span></span></span></p>
<p dir="RTL" ><span >-<span > <span >إجادة استخدام أجهزة القياس (<span dir="LTR" >Multimeter<span >، <span dir="LTR" >Megger<span > وغيرها).<span dir="LTR" ></span></span></span></span></span></span></span></span></p>
<p dir="RTL" ><span >-<span > <span >معرفة جيدة في صيانة واستكشاف الأعطال لأنظمة <span dir="LTR" >PLC<span >.<span dir="LTR" ></span></span></span></span></span></span></p>
<p dir="RTL" ><span >-<span > <span >إجادة اللغتين العربية والإنجليزية.<span dir="LTR" ></span></span></span></span></p>
<p dir="RTL" ><span >-<span > <span >إجادة استخدام برامج <span dir="LTR" >Microsoft Office<span >.<span dir="LTR" ></span></span></span></span></span></span></p>
<p dir="RTL" ><span >-<span > <span >يُفضل من لديه دورات تدريبية متخصصة في مجال العمل.<span dir="LTR" ></span></span></span></span></p>
<p align="center" dir="RTL" ><span >من تنطبق عليهم الشروط اعلاه والمهتمين ارسال السيرة الذاتية على<span dir="LTR" ></span></span></p>
<p align="center" dir="RTL" ><b><span ><a href="mailto:jobcvs990@gmail.com"><span dir="LTR" >jobcvs990@gmail.com</span></a></span></b><b><span dir="LTR" ></span></b></p>
<p align="center" dir="RTL" ><span >للاستفسار ولمزيد من المعلومات التواصل عبر<span >رقم الهاتف على واتساب<span dir="LTR" ></span></span></span></p>
<p align="center" dir="RTL" ><b><span >0797403988</span></b><b><span ></span></b></p>
جهة العمل غير مُفصح عنها
الأردن - عمّان
<p><h4>Job description</h4>
<p><strong>Job role - Senior/Principal MEP Engineer (Building Services)</strong><br>
Verbal and written communication in English is mandatory.</p>
<p><strong>Strong experience:</strong></p>
<ul>
<li>8–15 years of mechanical building services design experience</li>
<li>Strong HVAC design background</li>
<li>Commercial, residential, mixed-use project experience</li>
<li>ASHRAE and NFPA knowledge</li>
<li>GCC/Middle East project experience</li>
</ul>
<p><strong>Responsibilities:</strong></p>
<ul>
<li>Support and deliver mechanical design packages for building services projects</li>
<li>Work on HVAC, plumbing, drainage, and fire protection systems</li>
<li>Ensure designs comply with international codes (ASHRAE, NFPA, BS) and local authority requirements</li>
<li>Contribute to sustainable design solutions, including energy-efficient systems</li>
<li>Coordinate with multidisciplinary teams, clients, and contractors</li>
<li>Prepare and review technical deliverables</li>
<li>Support project delivery from concept through to commissioning</li>
</ul>
<p><strong>Requirements:</strong></p>
<ul>
<li>Bachelor’s degree in Mechanical Engineering</li>
<li>8–15 years of experience in mechanical building services design</li>
<li>Good knowledge of international standards and local authority requirements</li>
<li>Experience working on building projects (commercial, residential, mixed-use)</li>
<li>Strong coordination and communication skills</li>
<li>Middle East experience preferred</li>
</ul>
<p>With over 90 years' combined experience, NES Fircroft is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining, and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>
NES Global Talent
الأردن
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<strong>Job Role -Principal Engineer – Electrical (Aviation) <br>Verbal and written communication in English is mandatory<br>Responsibilities:</strong><ul><li>Lead electrical design from feasibility and Basis of Design (BoD) through detailed design, tender and construction support for aviation facilities.</li><li>Own the electrical power strategy for large-scale facilities (e.g., hangar bays): MV/LV distribution, redundancy, load management, earthing, and control philosophies—balancing reliability, safety, and energy performance (IEC/NFPA context).</li><li>Engineer electrical systems for hazardous operations: paint booths/rooms, fuel-cell maintenance areas, welding zones—ensuring compliance with ATEX/IECEx and coordination with mechanical ventilation and controls.</li><li>Design and specify power systems for aviation facilities: transformers, generators, UPS, distribution boards, and backup systems for mission-critical operations.</li><li>Integrate electrical utilities across MRO and workshop environments—ground power units (GPU), PCA interfaces, process equipment loads, and coordination with mechanical, fire/life safety, and control systems.</li><li>Shape electrical systems for catering facilities: resilient power distribution for kitchens, cold-chain systems, and hygienic areas aligned with HACCP/ISO 22000 requirements.</li><li>Deliver BIM-led coordination (Revit/Navisworks) across architecture, structures, MEP, and specialist systems; lead clash resolution and model QA.</li><li>Perform calculations and studies: load estimation, cable sizing, protection coordination, short-circuit analysis, and lighting design.</li><li>Author technical documents: BoD, load schedules, single-line diagrams (SLDs), specifications, and commissioning plans.</li><li>Mentor and review engineers/designers; lead design reviews, HAZOPs, and constructability/operability workshops.</li><li>Engage stakeholders—airlines, MROs, airport operators, and authorities—to secure approvals and ensure smooth delivery.</li><li>Lead retrofit, refurbishment, and brownfield upgrades in operational airport environments—assessing existing systems, planning phased upgrades, and integrating new systems with minimal disruption while improving capacity, compliance, and energy performance.</li></ul><strong>Key systems & domains you’ll cover:</strong><ul><li>Hangars & workshops: MV/LV distribution, ground power units (GPU), PCA electrical interfaces, high-bay lighting, emergency power, earthing and bonding for aircraft safety, and hangar door electrics. </li><li>Paint/corrosion control: hazardous-area electrical systems, explosion-proof equipment, interlocks, LEL monitoring interfaces, and ATEX/IECEx compliance coordinated with ventilation and controls. </li><li>Welding & fabrication: power distribution for welding equipment, equipment earthing, task lighting, and integration with extraction/LEV systems aligned with OSHA/ACGIH guidance. </li><li>Power systems: transformers, generators, UPS, LV panels, and distribution networks designed for redundancy, resilience, and mission-critical operations. </li><li>Catering facilities: resilient power supply for kitchens, cold rooms/freezers, food processing areas, and hygienic zoning aligned with HACCP/ISO 22000 requirements. </li><li>ELV & controls: fire alarm systems (NFPA 72), ICT, security (CCTV/access control), structured cabling, and BMS/SCADA integration for operational monitoring and control.</li></ul><br> <strong>Qualifications:</strong><ul><li>Bachelor’s degree in electrical engineering; Master's degree preferred.</li><li>Professionally registered (CEng, PE, or equivalent).</li><li>15+ years' experience in electrical building services design, including aviation and complex infrastructure projects.</li><li>Demonstrated experience leading multidisciplinary design teams and delivering major projects.</li></ul><strong>Technical Expertise:</strong><ul><li>Strong knowledge of international electrical design codes, standards, and aviation requirements.</li><li>Expertise in MV/LV power distribution, load assessments, protection systems, and earthing design.</li><li>Proficiency in BIM and industry-standard design software, including Revit, Navisworks, ETAP, and Dialux.</li><li>Experience in airport facilities, terminal buildings, and aviation-related infrastructure is highly desirable</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>
Amentum
الأردن - عمّان
<p><h4>Job description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p>
<p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p>
<p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p>
<p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, A&P flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p>
<p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p>
<p>USAF equivalent position is Aircraft Mechanic Apprentice.</p>
<h4>Essential responsibilities:</h4>
<ul>
<li>Performs all daily launch/recovery duties in support of operational requirements.</li>
<li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneuhydraulic, fuel, electrical/electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work with little-to-no supervision.</li>
<li>Performs all other duties as assigned or requested.</li>
</ul>
<h4>Minimum requirements:</h4>
<ul>
<li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li>
<li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must submit updated SF-86 within 30 days of hire start date.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active state issued driver’s license.</li>
<li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred qualifications:</h4>
<ul>
<li>Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an airframe and powerplant mechanic.</li>
<li>RPA deployment experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>Aircraft mechanic experience within the last 10 years.</li>
<li>MQ-9 experience as an aircraft mechanic.</li>
<li>MQ-9 aircraft composite repair/replacement experience.</li>
</ul></p><p></p>
toto
الأردن
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><strong>Maintenance Engineer Needed</strong></p><p><br></p><p>One of the companies announces its need to hire a <strong>Maintenance Engineer</strong> to work at a mall located on <strong>Al-Mawasafat and Al-Maqayis Street</strong>.</p><p><br></p><p><strong>Required Qualifications and Skills:</strong></p><p><br></p><p>* 3 to 5 years of practical experience in the maintenance field.</p><p>* Ability to prepare and implement preventive and corrective plans for equipment and systems.</p><p>* Monitoring daily maintenance operations and ensuring the readiness of facilities and services.</p><p>* Experience in supervising work teams and technicians and distributing tasks.</p><p>* Ability to diagnose faults and provide appropriate solutions efficiently and quickly.</p><p>* Good knowledge of electrical, mechanical, HVAC, and plumbing systems.</p><p>* Adherence to safety and health regulations and their application.</p><p>* Good skills in preparing technical reports and monitoring contractor work.</p><p>* Ability to work under pressure, solve problems, and make appropriate decisions.</p><p>* Communication and organizational skills and teamwork.</p><p><br></p> </div><h2 class="h5">Skills</h2>
<div data-jb-field="skills"><p>3 to 5 years of practical experience in the maintenance field.</p><p>* Ability to prepare and implement preventive and corrective plans for equipment and systems.</p><p>* Monitoring daily maintenance operations and ensuring the readiness of facilities and services.</p><p>* Experience in supervising work teams and technicians and distributing tasks.</p><p>* Ability to diagnose faults and provide appropriate solutions efficiently and quickly.</p><p>* Good knowledge of electrical, mechanical, HVAC, and plumbing systems.</p><p>* Adherence to safety and health regulations and their application.</p><p>* Good skills in preparing technical reports and monitoring contractor work.</p><p>* Ability to work under pressure, solve problems, and make appropriate decisions.</p><p>* Communication and organizational skills and teamwork.</p><p><br></p></div>
Amentum
الأردن - عمّان
<p><h4>Job description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p>
<p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p>
<p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p>
<p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engine in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p>
<p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p>
<p>USAF equivalent position is Aircraft Mechanic Journeyman.</p>
<h4>Essential responsibilities:</h4>
<ul>
<li>Performs all daily launch/recovery duties in support of operational requirements.</li>
<li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic/hydraulic, fuel, electrical/electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work without supervision.</li>
<li>Provides technical and directional leadership guidance to lower-level aircraft mechanics.</li>
<li>Provides training to lower-level aircraft mechanics.</li>
<li>Performs all other duties as assigned or requested.</li>
</ul>
<h4>Minimum requirements:</h4>
<ul>
<li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of three years of actual aircraft mechanic maintenance experience required.</li>
<li>Minimum of one year experience on MQ-9 aircraft, as an aircraft mechanic.</li>
<li>Must have comprehensive knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess comprehensive knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a comprehensive understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must submit updated SF-86 within 30 days of hire start date.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active state issued driver’s license.</li>
<li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred qualifications:</h4>
<ul>
<li>Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an airframe and powerplant mechanic.</li>
<li>Aircraft mechanic experience within the last 10 years.</li>
<li>RPA deployment experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>MQ-9 aircraft composite repair/replacement experience.</li>
</ul>
<h4>Compensation details:</h4>
<p>$36.26 per hour</p>
<p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p>
<h4>Benefits overview:</h4>
<p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p>
<ul>
<li>Health, dental, and vision insurance</li>
<li>Paid time off and holidays</li>
<li>Retirement benefits (including 401(k) matching)</li>
<li>Educational reimbursement</li>
<li>Parental leave</li>
<li>Employee stock purchase plan</li>
<li>Tax-saving options</li>
<li>Disability and life insurance</li>
<li>Pet insurance</li>
</ul>
<p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p>
<h4>Additional information</h4>
<p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>
NES Global Talent
الأردن
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<strong>Job description<br>Job Role -Principal Engineer – Mechanical – Aviation Buildings<br>Verbal and written communication in English is mandatory<br>Responsibilities:</strong><ul><li>Lead mechanical/HVAC design from feasibility and basis-of-design (BoD) through detailed design, tender and construction support for aviation facilities.</li><li>Own the environmental strategy for very large volumes (e.g., hangar bays): heating/cooling concepts, destratification, purge/exhaust modes, make-up air, and controls sequences—balancing energy, IAQ and safety. (UFC/ASHRAE/NFPA context).</li><li>Engineer specialist ventilation for hazardous operations: paint spray booths/rooms, fuel-cell maintenance/purge ventilation, welding/fume extraction, VOC control, and hazardous-area interfaces with electrical/controls.</li><li>Integrate process utilities common to MRO and workshops.</li><li>Shape catering facility HVAC and hygienic air zones: kitchen exhaust & makeup air (NFPA 96), pressure cascades, temperature/humidity control for clean prep/packing.</li><li>Deliver BIM-led coordination (Revit/Navisworks) across architecture, structures, process, fire protection, and controls; lead clash resolution and model QA.</li><li>Run calculations & simulations: loads, duct/pipe sizing, ventilation rates, smoke/fume capture, and (where needed) CFD to support the thermal comfort studies.</li><li>Author technical documents: BoD, design reports, specifications, sequences of operation, control narratives, FAT/SAT/commissioning plans.</li><li>Engage stakeholders—airlines/MROs, airport operators, food safety teams, and authorities—to secure approvals and smooth delivery.</li><li>Lead retrofit, refurbishment, and brownfield upgrade projects within operational airport environments—assessing existing systems, developing phased upgrade strategies, ensuring minimal disruption to ongoing operations, and integrating new systems with legacy infrastructure while addressing capacity, compliance, and energy performance improvements.<br> <br> </li></ul><strong>Key systems & domains you’ll cover:</strong><ul><li>Hangars & workshops: general and emergency exhaust, purge ventilation for fuel system work, floor-level capture where required, destratification/HVLS fans, door air management, radiant/air systems, PCA (pre-conditioned air) and GSE interfaces.</li><li>Catering facilities: high-duty kitchen exhaust & makeup air (hoods, MAUs, heat recovery), grease ducting, rooftop terminations, pressure zoning for hygiene, and interfaces to cold rooms/freezers and clean areas.</li><li>Experience in refurbishment projects, passenger terminal building Mechanical design (HVAC, Drainage systems) is preferred.<br> <br> </li></ul><strong>Qualifications:</strong><ul><li>Bachelor’s or Master’s degree in Mechanical Engineering.</li><li>Professional registration (e.g., CEng/PE) strongly preferred.</li><li>15+ years’ experience in building services (mechanical/HVAC), with significant aviation project delivery (Passenger terminal building, hangars, MRO shops, flight catering, or similar).</li><li>Proven leadership as Lead/Principal Engineer on multi-disciplinary design projects and Prior delivery in live airport environments (airside/landside interfaces, works phasing) is preferred.</li><li>Expertise writing BoDs, specifications, P&IDs, control sequences, etc.</li><li>BIM fluency: Revit, Navisworks; competence with calculations (e.g., IES-VE/HAP/eQuest),CFD exposure preferred.</li><li>Client-facing communication and team leadership; mentoring and QA/QC across multiple concurrent packages.</li><li>Strong communication skills for effective client presentations, stakeholder workshops, and cross-functional coordination.</li><li>Willingness to be based at Dammam Airport for the initial phase of the project (short-term assignment) and relocate to the main office upon project completion</li></ul><br>If you find this job matching your skills, please apply or share your CV on sayali.kothmire@nesfircroft.com<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>
جهة العمل غير مُفصح عنها
الأردن - عمّان
<p><h4>Job description</h4>
<p><strong>Job role - Principal engineer – mechanical – aviation buildings</strong><br>
Verbal and written communication in English is mandatory.</p>
<h4>Responsibilities:</h4>
<ul>
<li>Lead mechanical/HVAC design from feasibility and basis-of-design (BoD) through detailed design, tender and construction support for aviation facilities.</li>
<li>Own the environmental strategy for very large volumes (e.g., hangar bays): heating/cooling concepts, destratification, purge/exhaust modes, make-up air, and controls sequences—balancing energy, IAQ and safety (UFC/ASHRAE/NFPA context).</li>
<li>Engineer specialist ventilation for hazardous operations: paint spray booths/rooms, fuel-cell maintenance/purge ventilation, welding/fume extraction, VOC control, and hazardous-area interfaces with electrical/controls.</li>
<li>Integrate process utilities common to MRO and workshops.</li>
<li>Shape catering facility HVAC and hygienic air zones: kitchen exhaust and makeup air (NFPA 96), pressure cascades, temperature/humidity control for clean prep/packing.</li>
<li>Deliver BIM-led coordination (Revit/Navisworks) across architecture, structures, process, fire protection, and controls; lead clash resolution and model QA.</li>
<li>Run calculations and simulations: loads, duct/pipe sizing, ventilation rates, smoke/fume capture, and (where needed) CFD to support the thermal comfort studies.</li>
<li>Author technical documents: BoD, design reports, specifications, sequences of operation, control narratives, FAT/SAT/commissioning plans.</li>
<li>Engage stakeholders—airlines/MROs, airport operators, food safety teams, and authorities—to secure approvals and smooth delivery.</li>
<li>Lead retrofit, refurbishment, and brownfield upgrade projects within operational airport environments—assessing existing systems, developing phased upgrade strategies, ensuring minimal disruption to ongoing operations, and integrating new systems with legacy infrastructure while addressing capacity, compliance, and energy performance improvements.</li>
</ul>
<h4>Key systems and domains you’ll cover:</h4>
<ul>
<li>Hangars and workshops: general and emergency exhaust, purge ventilation for fuel system work, floor-level capture where required, destratification/ HVLS fans, door air management, radiant/air systems, PCA (pre-conditioned air) and GSE interfaces.</li>
<li>Catering facilities: high-duty kitchen exhaust and makeup air (hoods, MAUs, heat recovery), grease ducting, rooftop terminations, pressure zoning for hygiene, and interfaces to cold rooms/freezers and clean areas.</li>
<li>Experience in refurbishment projects, passenger terminal building mechanical design (HVAC, drainage systems) is preferred.</li>
</ul>
<h4>Qualifications:</h4>
<ul>
<li>Bachelor’s or master’s degree in mechanical engineering.</li>
<li>Professional registration (e.g., CEng/PE) strongly preferred.</li>
<li>15+ years’ experience in building services (mechanical/HVAC), with significant aviation project delivery (passenger terminal building, hangars, MRO shops, flight catering, or similar).</li>
<li>Proven leadership as lead/principal engineer on multi-disciplinary design projects and prior delivery in live airport environments (airside/landside interfaces, works phasing) is preferred.</li>
<li>Expertise writing BoDs, specifications, P&IDs, control sequences, etc.</li>
<li>BIM fluency: Revit, Navisworks; competence with calculations (e.g., IES-VE/HAP/eQuest), CFD exposure preferred.</li>
<li>Client-facing communication and team leadership; mentoring and QA/QC across multiple concurrent packages.</li>
<li>Strong communication skills for effective client presentations, stakeholder workshops, and cross-functional coordination.</li>
<li>Willingness to be based at Dammam Airport for the initial phase of the project (short-term assignment) and relocate to the main office upon project completion.</li>
</ul>
<p>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the oil & gas, power & renewables, chemicals, construction & infrastructure, life sciences, mining and manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>
جهة العمل غير مُفصح عنها
الأردن - عمّان
<p><h4>Job description</h4>
<p><strong>Job role - Principal engineer – mechanical – aviation buildings</strong><br>
Verbal and written communication in English is mandatory.</p>
<h4>Responsibilities:</h4>
<ul>
<li>Lead mechanical/HVAC design from feasibility and basis-of-design (BoD) through detailed design, tender and construction support for aviation facilities.</li>
<li>Own the environmental strategy for very large volumes (e.g., hangar bays): heating/cooling concepts, destratification, purge/exhaust modes, make-up air, and controls sequences—balancing energy, IAQ and safety (UFC/ASHRAE/NFPA context).</li>
<li>Engineer specialist ventilation for hazardous operations: paint spray booths/rooms, fuel-cell maintenance/purge ventilation, welding/fume extraction, VOC control, and hazardous-area interfaces with electrical/controls.</li>
<li>Integrate process utilities common to MRO and workshops.</li>
<li>Shape catering facility HVAC and hygienic air zones: kitchen exhaust and makeup air (NFPA 96), pressure cascades, temperature/humidity control for clean prep/packing.</li>
<li>Deliver BIM-led coordination (Revit/Navisworks) across architecture, structures, process, fire protection, and controls; lead clash resolution and model QA.</li>
<li>Run calculations and simulations: loads, duct/pipe sizing, ventilation rates, smoke/fume capture, and (where needed) CFD to support the thermal comfort studies.</li>
<li>Author technical documents: BoD, design reports, specifications, sequences of operation, control narratives, FAT/SAT/commissioning plans.</li>
<li>Engage stakeholders—airlines/MROs, airport operators, food safety teams, and authorities—to secure approvals and smooth delivery.</li>
<li>Lead retrofit, refurbishment, and brownfield upgrade projects within operational airport environments—assessing existing systems, developing phased upgrade strategies, ensuring minimal disruption to ongoing operations, and integrating new systems with legacy infrastructure while addressing capacity, compliance, and energy performance improvements.</li>
</ul>
<h4>Key systems and domains you’ll cover:</h4>
<ul>
<li>Hangars and workshops: general and emergency exhaust, purge ventilation for fuel system work, floor-level capture where required, destratification/ HVLS fans, door air management, radiant/air systems, PCA (pre-conditioned air) and GSE interfaces.</li>
<li>Catering facilities: high-duty kitchen exhaust and makeup air (hoods, MAUs, heat recovery), grease ducting, rooftop terminations, pressure zoning for hygiene, and interfaces to cold rooms/freezers and clean areas.</li>
<li>Experience in refurbishment projects, passenger terminal building mechanical design (HVAC, drainage systems) is preferred.</li>
</ul>
<h4>Qualifications:</h4>
<ul>
<li>Bachelor’s or master’s degree in mechanical engineering.</li>
<li>Professional registration (e.g., CEng/PE) strongly preferred.</li>
<li>15+ years’ experience in building services (mechanical/HVAC), with significant aviation project delivery (passenger terminal building, hangars, MRO shops, flight catering, or similar).</li>
<li>Proven leadership as lead/principal engineer on multi-disciplinary design projects and prior delivery in live airport environments (airside/landside interfaces, works phasing) is preferred.</li>
<li>Expertise writing BoDs, specifications, P&IDs, control sequences, etc.</li>
<li>BIM fluency: Revit, Navisworks; competence with calculations (e.g., IES-VE/HAP/eQuest), CFD exposure preferred.</li>
<li>Client-facing communication and team leadership; mentoring and QA/QC across multiple concurrent packages.</li>
<li>Strong communication skills for effective client presentations, stakeholder workshops, and cross-functional coordination.</li>
<li>Willingness to be based at Dammam Airport for the initial phase of the project (short-term assignment) and relocate to the main office upon project completion.</li>
</ul>
<p>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the oil & gas, power & renewables, chemicals, construction & infrastructure, life sciences, mining and manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>
جهة العمل غير مُفصح عنها
الأردن - عمّان
<p><h4>Responsibilities:</h4>
<p><strong>Lead electrical design</strong> from feasibility and basis of design (BoD) through detailed design, tender, and construction support for aviation facilities.</p>
<p><strong>Own the electrical power strategy</strong> for large-scale facilities (e.g., hangar bays): MV/LV distribution, redundancy, load management, earthing, and control philosophies—balancing reliability, safety, and energy performance (IEC/NFPA context).</p>
<p><strong>Engineer electrical systems</strong> for hazardous operations: paint booths/rooms, fuel-cell maintenance areas, welding zones—ensuring compliance with ATEX/IECEx and coordination with mechanical ventilation and controls.</p>
<p><strong>Design and specify power systems</strong> for aviation facilities: transformers, generators, UPS, distribution boards, and backup systems for mission-critical operations.</p>
<p><strong>Integrate electrical utilities</strong> across MRO and workshop environments—ground power units (GPU), PCA interfaces, process equipment loads, and coordination with mechanical, fire/life safety, and control systems.</p>
<p><strong>Shape electrical systems</strong> for catering facilities: resilient power distribution for kitchens, cold-chain systems, and hygienic areas aligned with HACCP/ISO 22000 requirements.</p>
<p><strong>Deliver BIM-led coordination</strong> (Revit/Navisworks) across architecture, structures, MEP, and specialist systems; lead clash resolution and model QA.</p>
<p><strong>Perform calculations and studies:</strong> load estimation, cable sizing, protection coordination, short-circuit analysis, and lighting design.</p>
<p><strong>Author technical documents:</strong> BoD, load schedules, single-line diagrams (SLDs), specifications, and commissioning plans.</p>
<p><strong>Mentor and review engineers/designers;</strong> lead design reviews, HAZOPs, and constructability/operability workshops.</p>
<p><strong>Engage stakeholders</strong>—airlines, MROs, airport operators, and authorities—to secure approvals and ensure smooth delivery.</p>
<p><strong>Lead retrofit, refurbishment, and brownfield upgrades</strong> in operational airport environments—assessing existing systems, planning phased upgrades, and integrating new systems with minimal disruption while improving capacity, compliance, and energy performance.</p>
<h4>Key systems & domains you’ll cover:</h4>
<ul>
<li>Hangars & workshops: MV/LV distribution, ground power units (GPU), PCA electrical interfaces, high-bay lighting, emergency power, earthing and bonding for aircraft safety, and hangar door electrics.</li>
<li>Paint/corrosion control: hazardous-area electrical systems, explosion-proof equipment, interlocks, LEL monitoring interfaces, and ATEX/IECEx compliance coordinated with ventilation and controls.</li>
<li>Welding & fabrication: power distribution for welding equipment, equipment earthing, task lighting, and integration with extraction/LEV systems aligned with OSHA/ACGIH guidance.</li>
<li>Power systems: transformers, generators, UPS, LV panels, and distribution networks designed for redundancy, resilience, and mission-critical operations.</li>
<li>Catering facilities: resilient power supply for kitchens, cold rooms/freezers, food processing areas, and hygienic zoning aligned with HACCP/ISO 22000 requirements.</li>
<li>ELV & controls: fire alarm systems (NFPA 72), ICT, security (CCTV/access control), structured cabling, and BMS/SCADA integration for operational monitoring and control.</li>
</ul>
<h4>Qualifications:</h4>
<ul>
<li>Bachelor’s degree in electrical engineering; master’s degree preferred.</li>
<li>Professionally registered (CEng, PE, or equivalent).</li>
<li>15+ years' experience in electrical building services design, including aviation and complex infrastructure projects.</li>
<li>Demonstrated experience leading multidisciplinary design teams and delivering major projects.</li>
</ul>
<h4>Technical expertise:</h4>
<ul>
<li>Strong knowledge of international electrical design codes, standards, and aviation requirements.</li>
<li>Expertise in MV/LV power distribution, load assessments, protection systems, and earthing design.</li>
<li>Proficiency in BIM and industry-standard design software, including Revit, Navisworks, ETAP, and Dialux.</li>
<li>Experience in airport facilities, terminal buildings, and aviation-related infrastructure is highly desirable.</li>
</ul></p><p></p>
جهة العمل غير مُفصح عنها
الأردن - عمّان
<p><h4>Responsibilities:</h4>
<p><strong>Lead electrical design</strong> from feasibility and basis of design (BoD) through detailed design, tender, and construction support for aviation facilities.</p>
<p><strong>Own the electrical power strategy</strong> for large-scale facilities (e.g., hangar bays): MV/LV distribution, redundancy, load management, earthing, and control philosophies—balancing reliability, safety, and energy performance (IEC/NFPA context).</p>
<p><strong>Engineer electrical systems</strong> for hazardous operations: paint booths/rooms, fuel-cell maintenance areas, welding zones—ensuring compliance with ATEX/IECEx and coordination with mechanical ventilation and controls.</p>
<p><strong>Design and specify power systems</strong> for aviation facilities: transformers, generators, UPS, distribution boards, and backup systems for mission-critical operations.</p>
<p><strong>Integrate electrical utilities</strong> across MRO and workshop environments—ground power units (GPU), PCA interfaces, process equipment loads, and coordination with mechanical, fire/life safety, and control systems.</p>
<p><strong>Shape electrical systems</strong> for catering facilities: resilient power distribution for kitchens, cold-chain systems, and hygienic areas aligned with HACCP/ISO 22000 requirements.</p>
<p><strong>Deliver BIM-led coordination</strong> (Revit/Navisworks) across architecture, structures, MEP, and specialist systems; lead clash resolution and model QA.</p>
<p><strong>Perform calculations and studies:</strong> load estimation, cable sizing, protection coordination, short-circuit analysis, and lighting design.</p>
<p><strong>Author technical documents:</strong> BoD, load schedules, single-line diagrams (SLDs), specifications, and commissioning plans.</p>
<p><strong>Mentor and review engineers/designers;</strong> lead design reviews, HAZOPs, and constructability/operability workshops.</p>
<p><strong>Engage stakeholders</strong>—airlines, MROs, airport operators, and authorities—to secure approvals and ensure smooth delivery.</p>
<p><strong>Lead retrofit, refurbishment, and brownfield upgrades</strong> in operational airport environments—assessing existing systems, planning phased upgrades, and integrating new systems with minimal disruption while improving capacity, compliance, and energy performance.</p>
<h4>Key systems & domains you’ll cover:</h4>
<ul>
<li>Hangars & workshops: MV/LV distribution, ground power units (GPU), PCA electrical interfaces, high-bay lighting, emergency power, earthing and bonding for aircraft safety, and hangar door electrics.</li>
<li>Paint/corrosion control: hazardous-area electrical systems, explosion-proof equipment, interlocks, LEL monitoring interfaces, and ATEX/IECEx compliance coordinated with ventilation and controls.</li>
<li>Welding & fabrication: power distribution for welding equipment, equipment earthing, task lighting, and integration with extraction/LEV systems aligned with OSHA/ACGIH guidance.</li>
<li>Power systems: transformers, generators, UPS, LV panels, and distribution networks designed for redundancy, resilience, and mission-critical operations.</li>
<li>Catering facilities: resilient power supply for kitchens, cold rooms/freezers, food processing areas, and hygienic zoning aligned with HACCP/ISO 22000 requirements.</li>
<li>ELV & controls: fire alarm systems (NFPA 72), ICT, security (CCTV/access control), structured cabling, and BMS/SCADA integration for operational monitoring and control.</li>
</ul>
<h4>Qualifications:</h4>
<ul>
<li>Bachelor’s degree in electrical engineering; master’s degree preferred.</li>
<li>Professionally registered (CEng, PE, or equivalent).</li>
<li>15+ years' experience in electrical building services design, including aviation and complex infrastructure projects.</li>
<li>Demonstrated experience leading multidisciplinary design teams and delivering major projects.</li>
</ul>
<h4>Technical expertise:</h4>
<ul>
<li>Strong knowledge of international electrical design codes, standards, and aviation requirements.</li>
<li>Expertise in MV/LV power distribution, load assessments, protection systems, and earthing design.</li>
<li>Proficiency in BIM and industry-standard design software, including Revit, Navisworks, ETAP, and Dialux.</li>
<li>Experience in airport facilities, terminal buildings, and aviation-related infrastructure is highly desirable.</li>
</ul></p><p></p>
Amentum
الأردن - عمّان
<p><h4>Job description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p>
<p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p>
<p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p>
<p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engine in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p>
<p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p>
<p>USAF equivalent position is Aircraft Mechanic Journeyman.</p>
<h4>Essential responsibilities:</h4>
<ul>
<li>Performs all daily launch/recovery duties in support of operational requirements.</li>
<li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic/hydraulic, fuel, electrical/electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work without supervision.</li>
<li>Provides technical and directional leadership guidance to lower-level aircraft mechanics.</li>
<li>Provides training to lower-level aircraft mechanics.</li>
<li>Performs all other duties as assigned or requested.</li>
</ul>
<h4>Minimum requirements:</h4>
<ul>
<li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of three years of actual aircraft mechanic maintenance experience required.</li>
<li>Minimum of one year experience on MQ-9 aircraft, as an aircraft mechanic.</li>
<li>Must have comprehensive knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess comprehensive knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a comprehensive understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must submit updated SF-86 within 30 days of hire start date.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active state issued driver’s license.</li>
<li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred qualifications:</h4>
<ul>
<li>Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an airframe and powerplant mechanic.</li>
<li>Aircraft mechanic experience within the last 10 years.</li>
<li>RPA deployment experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>MQ-9 aircraft composite repair/replacement experience.</li>
</ul>
<h4>Compensation details:</h4>
<p>$36.26 per hour</p>
<p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p>
<h4>Benefits overview:</h4>
<p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p>
<ul>
<li>Health, dental, and vision insurance</li>
<li>Paid time off and holidays</li>
<li>Retirement benefits (including 401(k) matching)</li>
<li>Educational reimbursement</li>
<li>Parental leave</li>
<li>Employee stock purchase plan</li>
<li>Tax-saving options</li>
<li>Disability and life insurance</li>
<li>Pet insurance</li>
</ul>
<p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p>
<h4>Additional information</h4>
<p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>