وظائف محلل فني في الأردن

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Network Engineer Tier 1 Role Summary: The Network Engineer Tier 1 is an entry-level technical role responsible for the configuration, installation, and operation of network equipment under direct supervision. This role focuses on performing scheduled maintenance, handling basic break/fix tasks, and ensuring all network configurations adhere to established standards and designs. They work closely with NOC teams on escalated incidents and change deployment.</p><p>Core Responsibilities:</p><ul><li>Configuration &amp; Implementation: Perform basic configuration changes, device staging, and implementation of approved change requests on routers, switches, and firewalls.</li><li>Operational Support: Assist senior engineers with troubleshooting complex issues, focusing on verifying configurations, checking status indicators, and collecting diagnostic data (logs, packet captures).</li><li>Network Monitoring &amp; Tools: Maintain and operate network monitoring tools, ensuring proper configuration and data integrity.</li><li>Documentation: Create and maintain accurate network documentation, including diagrams, inventories, and configuration baselines.</li><li>Change Management: Execute pre-approved maintenance windows and support the deployment of firmware upgrades and patches.</li></ul><p>Essential Skills and Knowledge:</p><ul><li>Networking: Solid grasp of the OSI model, TCP/IP, basic routing (static, OSPF), and switching (VLANs, STP).</li><li>Vendor CLI: Familiarity with the Command Line Interface (CLI) for at least one major vendor (Cisco, Fortinet, Juniper).</li><li>Troubleshooting: Ability to use basic network troubleshooting tools (ping, traceroute, simple show commands).</li><li>Communication: Clear and effective communication for coordinating maintenance activities and reporting progress.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Required Qualifications:</h2><ul><li>Experience: Minimum of 1 to 2 years of hands-on experience in a networking, NOC, or data center environment.</li><li>Education: Associate's Degree in Information Technology, Computer Science, or equivalent technical training (or equivalent work experience).</li><li>Certifications (Desired): CompTIA Network+ or Fortinet Professional.</li><li>Certifications (Required): Cisco Certified Network Associate (CCNA).</li></ul><p></p></section>

<p><h4>Description</h4> <p>The incident response analyst is responsible for investigating, containing, eradicating, and supporting the recovery of cybersecurity incidents across customer and enterprise environments. The role plays a critical part in minimizing business impact from cyber threats by coordinating response activities, performing technical investigations, and supporting the continuous improvement of incident response capabilities.</p> <p>The role collaborates closely with security operations, threat intelligence, digital forensics, and customer IT teams to identify attack vectors, contain threats, and strengthen organizational resilience against future incidents.</p> <h4>Responsibilities</h4> <h4>Incident investigation & response</h4> <ul> <li>Respond to security incidents within defined SLAs and escalation procedures.</li> <li>Perform detailed investigations to determine nature of the attack, scope of compromise, impacted systems, attack vectors, and potential business impact.</li> <li>Analyze indicators of compromise (IOCs) and attacker activity.</li> <li>Identify containment, eradication, and recovery actions required to mitigate incidents.</li> <li>Coordinate incident response activities with internal and customer stakeholders.</li> </ul> <h4>Threat analysis & root cause investigation</h4> <ul> <li>Conduct in-depth analysis of security incidents and suspicious activities.</li> <li>Identify vulnerabilities, attack techniques, and security gaps contributing to incidents.</li> <li>Perform root cause analysis to determine how incidents occurred and identify preventive controls.</li> <li>Analyze attacker tactics, techniques, and procedures (TTPs) using industry frameworks such as MITRE ATT&CK.</li> </ul> <h4>Incident coordination & escalation</h4> <ul> <li>Manage incident response activities across multiple technical teams.</li> <li>Escalate incidents requiring digital forensics support, specialized technical expertise, and malware analysis.</li> <li>Coordinate communication between technical teams, management, and customer stakeholders.</li> <li>Support crisis management activities during major incidents.</li> </ul> <h4>Documentation & reporting</h4> <ul> <li>Prepare detailed incident reports documenting findings, impact assessments, root cause analysis, and remediation recommendations.</li> <li>Maintain investigation records and evidence documentation.</li> <li>Support development of executive-level incident summaries and post-incident reviews.</li> </ul> <h4>Process improvement & readiness</h4> <ul> <li>Support the development and enhancement of incident response playbooks, response procedures, and investigation methodologies.</li> <li>Participate in tabletop exercises and incident simulations.</li> <li>Identify opportunities to improve response effectiveness and operational readiness.</li> </ul> <h4>Our culture & code of conduct</h4> <p>At ZainTECH, we take pride in a culture built on collaboration, innovation, and uncompromising integrity. We are looking for individuals who share these values and are committed to customer-centricity and ethical excellence. All employees are expected to uphold our code of conduct, which serves as a guiding framework for responsible behaviour across everything we do - from how we work with each other to how we engage with clients and partners globally.</p> <h4>Requirements</h4> <ul> <li>Bachelor's degree or intermediate diploma (minimum) from a recognised institution.</li> <li>Minimum 3 years experience in cybersecurity / information security, including 1 or more years in incident response.</li> <li>At least one valid NCSC-approved IR certification like ECIH, CCIM, Blue Team Level 2, or another equivalent certification in the same field that is approved by the NCSC.</li> <li>Practical skills in log analysis, endpoint and network investigation, malware triage, and use of IR tooling.</li> <li>Exposure to SIEM/SOAR and EDR platforms is preferable.</li> <li>Experience in an MSSP or SOC environment is preferable.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Company Description<br><br><p>Join a hotel that is a member of the Accor network, whose group brings together more than 45 brands, 5,500 hotels, 10,000 restaurants and lifestyle destinations. Here, we believe in you and what you bring to the table. There are many opportunities for development and advancement. Every gesture, every smile, every action, contributes to creating a positive and memorable impact for our customers, our colleagues and also for our planet. Together, we embody the vision of responsible hospitality.</p><br><p>Take the opportunity to become a Heartist®, and let your heart guide you in this world where life beats faster.</p><br><br>Job Description<br><br><ul><li>Perform routine maintenance and repairs on mechanical, electrical, and plumbing systems</li><li>Diagnose and troubleshoot equipment malfunctions</li><li>Conduct regular inspections of facility equipment and infrastructure</li><li>Install and set up new equipment as needed</li><li>Respond promptly to maintenance requests and emergency situations</li><li>Maintain accurate records of maintenance activities and equipment status</li><li>Collaborate with other departments to ensure smooth operations</li><li>Adhere to all safety protocols and procedures</li><li>Participate in ongoing training and skill development programs</li><li>Assist in inventory management of tools, parts, and supplies</li><li>Contribute to the development and implementation of preventive maintenance schedules</li><li>Provide technical support and guidance to other team members as needed</li></ul><br>Qualifications<br><br><ul><li>High school diploma or vocational certificate in a relevant technical field</li><li>Minimum of 2 years of practical experience as a general technician or in a similar role</li><li>Proficiency in using basic tools and equipment related to facility maintenance</li><li>Strong problem-solving skills and ability to think critically</li><li>Excellent attention to detail and organizational skills</li><li>Ability to read and interpret technical manuals and schematics</li><li>Knowledge of safety procedures and regulations</li><li>Physical stamina and dexterity to perform various maintenance tasks</li><li>Excellent communication and interpersonal skills</li><li>Flexibility to work in a dynamic environment and handle multiple priorities</li><li>Goal-oriented mindset with a focus on efficiency and customer satisfaction</li><li>Relevant certifications in specific technical areas (e.g., HVAC, electrical) are a plus</li><li>Basic computer skills for record-keeping and communication purposes</li><li>Ability to work independently and as part of a team</li><li>Willingness to learn and adapt to new technologies and procedures</li></ul> </div>

<p><h4>Description</h4> <p>Are you ready to take the lead in driving technical excellence? Optimiza is looking for a dynamic and engaging technical team leader to inspire and guide our talented team of engineers and developers. As the technical team leader, you will play a pivotal role in shaping project success, fostering collaboration, and delivering cutting-edge solutions that exceed client expectations.</p> <h4>Key responsibilities:</h4> <ul> <li>Lead, mentor, and motivate a team of technical professionals to achieve project goals with a passion for quality and innovation.</li> <li>Plan, coordinate, and oversee technical project deliverables while ensuring timely and successful completion.</li> <li>Collaborate closely with stakeholders, project managers, and cross-functional teams to align technical efforts with business objectives.</li> <li>Drive continuous improvement by encouraging knowledge sharing, adopting best practices, and promoting a culture of learning.</li> <li>Identify risks and challenges early and implement effective solutions to keep projects on track.</li> <li>Communicate complex technical concepts clearly and engagingly to both technical team members and non-technical stakeholders.</li> <li>Stay ahead of the curve by keeping up with the latest technology trends and integrating relevant advancements into team practices.</li> </ul> <h4>Requirements</h4> <ul> <li>Bachelor's degree in computer science, engineering, or related field.</li> <li>Years of experience: 6+ years</li> <li>Technical knowledge: system administration, good knowledge in Windows, Linux, and networking (infrastructure support background)</li> <li>Good troubleshooting skills including networking and system administration.</li> <li>Customer support job experience.</li> </ul> <h4>Preferred skills</h4> <ul> <li>API traffic flow knowledge</li> <li>Database</li> <li>Active Directory and group policy</li> </ul> <h4>Benefits</h4> <ul> <li>Annual bonus</li> <li>Class A health insurance</li> <li>Training and development</li> <li>Performance bonus</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform routine maintenance and repairs on mechanical, electrical, and plumbing systems Diagnose and troubleshoot equipment malfunctions Conduct regular inspections of facility equipment and infrastructure Install and set up new equipment as needed Respond promptly to maintenance requests and emergency situations Maintain accurate records of maintenance activities and equipment status Collaborate with other departments to ensure smooth operations Adhere to all safety protocols and procedures Participate in ongoing training and skill development programs Assist in inventory management of tools, parts, and supplies Contribute to the development and implementation of preventive maintenance schedules Provide technical support and guidance to other team members as needed</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or vocational certificate in a relevant technical field</li><li>Minimum of 2 years of practical experience as a general technician or in a similar role</li><li>Proficiency in using basic tools and equipment related to facility maintenance</li><li>Strong problem-solving skills and ability to think critically</li><li>Excellent attention to detail and organizational skills</li><li>Ability to read and interpret technical manuals and schematics</li><li>Knowledge of safety procedures and regulations</li><li>Physical stamina and dexterity to perform various maintenance tasks</li><li>Excellent communication and interpersonal skills</li><li>Flexibility to work in a dynamic environment and handle multiple priorities</li><li>Goal-oriented mindset with a focus on efficiency and customer satisfaction</li><li>Relevant certifications in specific technical areas (e.g., HVAC, electrical) are a plus</li><li>Basic computer skills for record-keeping and communication purposes</li><li>Ability to work independently and as part of a team</li><li>Willingness to learn and adapt to new technologies and procedures</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Do you want to love what you do at work? Do you want to make a difference, an impact, and transform peoples lives? Do you want to work with a team that believes in disrupting the normal, boring, and average? If yes, then this is the job you are looking for , webook.com is Saudi s #1 event ticketing and experience booking platform in terms of technology, features, agility, revenue serving some of the largest mega events in the Kingdom surpassing over 2 billion in sales.</p><p>Key Responsibilities:</p><ul><li>Analyze and mining business data to identify patterns and correlations among the various data points.</li><li>Map and trace data within the enterprise data framework in order to solve a given business or system problem.</li><li>Design and create marts to support the business intelligence tools and provide data to the end users in support of business decisions.</li><li>Perform statistical analysis of the enterprise data.</li><li>Extract existing data to manipulate/calculate/format into useful presentations.</li><li>Identify and explore opportunities to enhance enterprise analytical databases using knowledge gained from experience and from an understanding of emerging methodologies .</li><li>Create and document logical data integration (ETL) strategies for data flows between source/target systems and the Enterprise Data Warehouse.</li><li>Perform a variety of in-depth data analysis, data modeling, and data administration tasks on complicated datasets with potentially complex data integration scenarios with limited supervision.</li><li>Establish, maintain, adhere to, and enforce Enterprise Data modeling and Data Integration standards.</li><li>Must support innovations by actively keeping technical and professional business knowledge current on emerging technology and Data Trends which may fit with enterprise needs.</li><li>Must be able to research and accurately articulate benefits and goals of these technologies.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelors Degree in in Computer Science, Management Information Systems, or a related field. Minimum of 4 years expiriance Overall Experience in information systems; background experience in ETL Processes, Application Development, Report Development, and Data Warehouse Projects.</p><p>Skills:</p><ul><li>Proficient in English written and verbal communication skills</li><li>Demonstrates excellent judgment and decision making skills</li><li>Demonstrated time management and priority setting skills</li><li>Excellent organizational skills</li><li>Possesses strong product knowledge</li><li>Possesses strong technical aptitude</li></ul><p></p></section>

<p>Accountabilities and Key Roles: Collaborate with cross-functional teams to design, test, and implement related products and services. Analyze product performance metrics and customer feedback to optimize offerings and ensure alignment with business goals. Stay updated with industry advancements and regulatory requirements to inform product development decisions. Coordinate with stakeholders across departments including Compliance, Risk, IT, and Operations. Ensuring requirements alignment with compliance, risk standards, and operational goals. Contribute to shaping the product roadmap across Arab Bank, BAAS, and Open Banking initiatives, focusing on Digital Accounts and Virtual IBAN by identifying opportunities, providing analysis, and supporting execution efforts. Streamline banking operations and processes related to consumer digital solutions digital accounts utilizing the application of AI technologies Lead the requirements gathering and support the delivery of consumer digital solutions, ensuring alignment with operational needs and a focus on improving customer experience, efficiency, and innovation Support the development of scalable, reusable, and modular solutions by advocating for the use of APIs and service-oriented architectures across multiple initiatives.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Job Requirements:</strong></p><ul><li>Education : Bachelor's degree in Computer Science, Information Technology, Business Administration, or a related field.</li><li>Experience : Minimum of 8 years of experience in product analysis or management within the financial technology or banking sector.</li><li>Competencies : Strong analytical and problem-solving skills, with the ability to translate business needs into technical solutions. Excellent communication and collaboration skills to work effectively with cross-functional teams. Proven track record of managing product lifecycles and driving strategic initiatives. Familiarity with regulatory standards and compliance requirements in the digital payment s domain. Ability to adapt to rapidly changing technologies and market conditions. High attention to detail, with the ability to manage and prioritize multiple tasks and projects simultaneously. Strong understanding of banking operations, digital channels, and customer journeys. Familiarity with APIs, digital onboarding, e-payments, and compliance requirements</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Title <br></span><p>Technical Support Engineer</p><br><br><br>Job Scope <br><p>The Technical Support Engineer is accountable for addressing technical issues in a timely and efficient manner and maintaining strong relationships with partners and end users ensuring full satisfaction at all times.</p><br><br><br>Main Duties and Responsibilities <br><ul> <li>Analyze technical issues based on defined support processes and procedures and report actions accordingly</li> <li>Attend to technical issues raised by partners and end users in a timely and efficient manner</li> <li>Maintain strong relationships with partners and customers</li> <li>Ensure constant and effective communication with assigned vendors securing full support on technical issues</li> <li>Respond to after-hours support queries during assigned rotations and escalate issues if needed</li> </ul><br><br>Position Requirements <br><br>Education <br><p>Bachelor’s degree in Computer Science or any other related field</p><br><br><br>Experience <br><p>At least 3 years of relevant experience preferably as an ATM Engineer.</p><br> <p>#LI-SK</p><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Discover your future at Citi <p>Working at Citi is far more than just a job. A career with us means joining a team of approximately 219,000 dedicated people from around the globe. At Citi, you’ll have the opportunity to grow your career, give back to your community and make a real impact.</p><br> Job Overview <p>The Regulatory Reporting role is an analyst position within the Controllers Organisation responsible for ensuring the timely, accurate, and complete preparation, validation, and submission of key regulatory reports and tax returns to supervisory authorities. The individual will support the preparation, analysis and submission of regulatory reports and will have a visibility within the organisation with opportunities to work directly&nbsp;with other Finance and non-Finance including the Businesses, Risk, Treasury, Financial Planning &amp; Analysis, as well as Operations.</p><br><p>This role requires a strong understanding of regulatory reporting, accounting principles, and internal control frameworks. You will also play an active role in Finance Transformation initiatives, helping to streamline reporting workflows, enhance data lineage, and implement digital automation tools.</p><br><p><b><u>Responsibilities: </u></b></p><br><ul><li>Support the preparation and submission of reports including regulatory returns, financial statements to various constituencies (local regulators, etc.) based on requirements such as Central Bank regulations and local statutory reporting.</li><li>Ensure compliance with Central Bank of Jordan regulations and support in Regulatory Change Management process.</li><li>Assist and handle tax related matters and ensure settlement of monthly taxes to local tax authorities.</li><li>Assist with closing the books and sub-ledgers, including passing appropriate required entries and financials at the end of each accounting period.</li><li>Facilitate the implementation of procedures and the development of analyses and reports and implementation / Maintain and execute robust internal controls over regulatory reporting.</li><li>Deliver routine and defined outputs.</li><li>Escalate problems or issues related to transactions, processes, reports, or procedures and ensure proper control execution.</li><li>Integrate established disciplinary knowledge within own specialty area with basic understanding of related industry practices.</li><li>Appropriately assess risk when business decisions are made, demonstrating particular consideration for the firm's reputation and safeguarding Citigroup, its clients and assets, by driving compliance with applicable laws, rules and regulations, adhering to Policy, applying sound ethical judgment regarding personal behaviour, conduct and business practices, and escalating, managing and reporting control issues with transparency.</li><li>Support on ad-hoc requests, automation projects, system enhancements and other initiatives as and when needed.</li></ul><p><b><u>Qualifications:</u></b></p><br><ul><li>Experience within the financial services industry and regulatory reporting.</li><li>Knowledge of Tax requirements and regulation.</li><li>Strong oral and written communication skills, with ability to synthesize complex concepts.&nbsp;</li><li>Strong technical problem-solving skills and an ability to identify conflicts, discrepancies and other issues and escalate to seniors.</li><li>Ability to manage competing priorities and tasks in a complex and dynamic and work well as part of a team.</li></ul><p><b><u>Education:</u></b></p><br><ul><li>Bachelor's degree in Finance, Accounting or related field.</li></ul><p>#LI-JD7</p><br><p><span><span><span><span><span><span><span><span><span><span><span><span>------------------------------------------------------</span></span></span></span></span></span></span></span></span></span></span></span></p><br><b>Job Family Group: </b>Finance<p><span><span><span><span><span><span><span><span><span><span><span><span>------------------------------------------------------</span></span></span></span></span></span></span></span></span></span></span></span></p><br><b>Job Family:</b>Regulatory Reporting<p><span><span><span><span><span><span><span><span>------------------------------------------------------</span></span></span></span></span></span></span></span></p><br><b>Time Type:</b>Full time<p><span><span>------------------------------------------------------</span></span></p><br><b>Most Relevant Skills </b>Business Acumen, Change Management, Constructive Debate, Data Analysis, Financial Acumen, Internal Controls, Issue Management, Process Execution, Regulatory Management, Regulatory Reporting.<p>------------------------------------------------------</p><br><b>Other Relevant Skills </b>For complementary skills, please see above and/or contact the recruiter.<p>------------------------------------------------------</p><br><p><i><span>Citi is an equal opportunity employer, and qualified candidates will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other characteristic protected by law.</span></i></p><br><p><i><span>If you are a person with a disability and need a reasonable accommodation to use our search tools and/or apply for a career opportunity review </span></i><i>Accessibility at Citi<span>.</span></i><br><i><span>View Citi’s </span>EEO Policy Statement<span> and the </span>Know Your Rights<span> poster.</span></i></p><br> <br> </div>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level electronic maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>USAF equivalent position is Avionics Technician Apprentice.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Applies basic technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities.</li> <li>Requires a basic understanding of the interrelationships of circuits and associated systems.</li> <li>Exercises independent judgment in performing assigned tasks in conjunction with designated direction from Production Staff, Avionic Leads, Avionics/Com Technician IIIs, or Avionics Technician IIs.</li> <li>Uses common and complex test instruments in the performance of assigned duties.</li> <li>Maintains, repairs, and installs various types of electronic equipment and related devices.</li> <li>Applies basic technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations.</li> <li>Must be able to work with limited supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft avionics and/or GCS maintenance experience required.</li> <li>Must have basic knowledge of basic and complex electronics maintenance and repair.</li> <li>Must have basic knowledge of RFF systems, components, and accessories.</li> <li>Must possess general understanding of technical publications related to aircraft electronics maintenance.</li> <li>Must know basic theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.</li> <li>Must be capable of using and reading blueprints, wiring diagrams, and data tables.</li> <li>Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or after the second deployment.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Current IAT Level II certification.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 experience as an avionics technician.</li> <li>Avionics technician experience within the last 10 years.</li> </ul> <h4>Compensation Details:</h4> <p>$34.52 per hour</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits Overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional Information</h4> <p>Original posting date: 05/29/2026 - Until Filled</p> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>AFCAP V: Jordan SWA Transient Aircraft Services Technician (Secret Clearance)<br><br><p><b><span>Belong, Connect, Grow</span><span>, with</span><span>KBR!&nbsp;</span></b></p><br><br><br><p><b><span>Program Summary</span></b></p><br><br><p><span>KBR, through the AFCAP V Program,assists</span><span>the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services</span><span>facilitate</span><span>essential</span><span>aircraft</span><span>arrivals and departures</span><span>servicesfor United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers Engineering Support, NTV Leasing, LAMS, Power Production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.&nbsp;</span></p><br><br><br><p><b><span>Job Summary</span></b></p><br><br><p><span><span>The Transient Aircraft Services (TAS) Technician</span><span>is responsible for</span><span>the execution of</span><span>aircraft</span><span>ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs</span><span>aircraft</span><span>arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</span></span></p><br><br><p><span><span>This position ensures all</span><span>aircraft</span><span>servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for</span><span>maintaining</span><span>operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</span></span></p><br><br><br><p><b><span>Roles and Responsibilities&nbsp;</span></b></p><br><br><ul><li><p><span><span>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE</span><span>at all times</span><span>.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Perform</span><span>aircraft</span><span>marshaling, parking, and positioning</span><span>in accordance with</span><span>applicable Technical Orders and airfield procedures.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Execute</span><span>aircraft</span><span>arrival and departure services, including</span><span>chocking</span><span>, grounding, and ensuring safe positioning on the flight line.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Conduct</span><span>aircraft</span><span>servicing operations, including general ground handling tasks required to support</span><span>aircraft</span><span>turn-around and mission readiness.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Assist</span><span>in</span><span>aircraft</span><span>launch and recovery operations in coordination with Supervisors and Airfield Management.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Maintain strict accountability of tools and equipment;</span><span>ensure compliance with tool control programs at all times</span><span>.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all</span><span>aircraft</span><span>servicing operations.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Identify</span><span>and report safety hazards, equipment malfunctions, and operational issues to leadership</span><span>immediately</span><span>.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Support documentation requirements, including</span><span>aircraft</span><span>servicing records, shift logs, and inspection checklists.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Assist</span><span>in</span><span>maintaining</span><span>cleanliness and organization of the flight line and work areas.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Support training and qualification requirements to</span><span>maintain</span><span>mission readiness and compliance with certification standards.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Perform duties in austere conditions, including extreme weather, while</span><span>maintaining</span><span>safety and operational discipline.</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Perform</span><span>additional</span><span>duties and</span><span>tasks as</span><span>assigned by the Supervisor or Site Manager.</span></span></p><br><br></li></ul><br><br><p><b><span>Basic Qualifications&nbsp;</span></b></p><br><br><ul><li><p><span><span>Must be a U.S. citizen </span></span></p><br><br></li></ul><br><ul><li><p><span><span>Ability to obtain/</span><span>maintain</span><span>a SECRET clearance&nbsp;</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Ability to</span><span>maintain</span><span>operational continuity across rotations and work within Government-led governance rhythms</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Minimum 3–5 years of experience in aviation operations,</span><span>aircraft</span><span>maintenance, or Transient Aircraft Services&nbsp;</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Hands-on experience working on a flight line or in</span><span>aircraft</span><span>ground operations&nbsp;</span></span></p><br><br></li></ul><br><br><p><b><span><span>Basic knowledge of:&nbsp;</span></span></b></p><br><br><ul><li><p><span><span>Aircraft</span><span>marshaling and ground handling procedures&nbsp;</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Flight line safety requirements&nbsp;</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Use of ground support equipment</span></span></p><br><br></li></ul><br><br><br><p><b><span>Preferred Qualifications</span></b></p><br><br><ul><li><p><span><span>Prior experience supporting U.S. Air Force TAS operations</span></span></p><br><br></li></ul><br><ul><li><p><span><span>FAA Airframe &amp; Powerplant (A&amp;P) certification or equivalent military experience</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Familiarity with FOD programs, tool control, and flight line safety compliance</span></span></p><br><br></li></ul><br><ul><li><p><span><span>Experience coordinating with MOC, Airfield Management, and</span><span>aircraft</span><span>maintenance teams</span><span>.</span></span></p><br><br></li></ul><br><br><p><b><span>K</span><span>BR Benefits</span></b></p><br><br><p><span><span>KBR offers a selection of competitive lifestyle benefits which could include</span><span>401</span><span>K plan with company match, medical, dental, vision, life insurance, AD&amp;D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development.&nbsp;</span></span></p><br><br><br><br><br> </div>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers engineering support, NTV leasing, LAMS, power production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance,</p><p></p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers engineering support, NTV leasing, LAMS, power production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance,</p><p></p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers Engineering Support, NTV Leasing, LAMS, Power Production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical,</p><p></p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers Engineering Support, NTV Leasing, LAMS, Power Production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical,</p><p></p>

<p><h4>Description</h4> <p>Do you want to love what you do at work? Do you want to make a difference, an impact, and transform people's lives? Do you want to work with a team that believes in disrupting the normal, boring, and average?</p> <p>If yes, then this is the job you are looking for. Webook is Saudi’s #1 event ticketing and experience booking platform in terms of technology, features, agility, and revenue, serving some of the largest mega events in the Kingdom surpassing over 2 billion in sales.</p> <h4>Key responsibilities:</h4> <ul> <li>Analyze and mine business data to identify patterns and correlations among the various data points.</li> <li>Map and trace data within the enterprise data framework in order to solve a given business or system problem.</li> <li>Design and create marts to support the business intelligence tools and provide data to the end users in support of business decisions.</li> <li>Perform statistical analysis of the enterprise data. Extract existing data to manipulate, calculate, and format into useful presentations.</li> <li>Identify and explore opportunities to enhance enterprise analytical databases using knowledge gained from experience and from an understanding of emerging methodologies.</li> <li>Create and document logical data integration (ETL) strategies for data flows between source/target systems and the Enterprise Data Warehouse.</li> <li>Perform a variety of in-depth data analysis, data modeling, and data administration tasks on complicated datasets with potentially complex data integration scenarios with limited supervision.</li> <li>Establish, maintain, adhere to, and enforce Enterprise Data modeling and Data Integration standards.</li> <li>Support innovations by actively keeping technical and professional business knowledge current on emerging technology and data trends which may fit with enterprise needs. Must be able to research and accurately articulate benefits and goals of these technologies.</li> </ul> <h4>Requirements</h4> <p>Bachelor's degree in Computer Science, Management Information Systems, or a related field.</p> <p>Minimum of 4 years experience.</p> <p>Overall experience in information systems; background experience in ETL processes, application development, report development, and data warehouse projects.</p> <h4>Skills:</h4> <ul> <li>Proficient in English written and verbal communication skills.</li> <li>Demonstrates excellent judgment and decision-making skills.</li> <li>Demonstrated time management and priority setting skills.</li> <li>Excellent organizational skills.</li> <li>Possesses strong product knowledge.</li> <li>Possesses strong technical aptitude.</li> </ul></p><p></p>

<p><h4>Description</h4> <p>Do you want to love what you do at work? Do you want to make a difference, an impact, and transform people's lives? Do you want to work with a team that believes in disrupting the normal, boring, and average?</p> <p>If yes, then this is the job you are looking for. Webook is Saudi’s #1 event ticketing and experience booking platform in terms of technology, features, agility, and revenue, serving some of the largest mega events in the Kingdom surpassing over 2 billion in sales.</p> <h4>Key responsibilities:</h4> <ul> <li>Analyze and mine business data to identify patterns and correlations among the various data points.</li> <li>Map and trace data within the enterprise data framework in order to solve a given business or system problem.</li> <li>Design and create marts to support the business intelligence tools and provide data to the end users in support of business decisions.</li> <li>Perform statistical analysis of the enterprise data. Extract existing data to manipulate, calculate, and format into useful presentations.</li> <li>Identify and explore opportunities to enhance enterprise analytical databases using knowledge gained from experience and from an understanding of emerging methodologies.</li> <li>Create and document logical data integration (ETL) strategies for data flows between source/target systems and the Enterprise Data Warehouse.</li> <li>Perform a variety of in-depth data analysis, data modeling, and data administration tasks on complicated datasets with potentially complex data integration scenarios with limited supervision.</li> <li>Establish, maintain, adhere to, and enforce Enterprise Data modeling and Data Integration standards.</li> <li>Support innovations by actively keeping technical and professional business knowledge current on emerging technology and data trends which may fit with enterprise needs. Must be able to research and accurately articulate benefits and goals of these technologies.</li> </ul> <h4>Requirements</h4> <p>Bachelor's degree in Computer Science, Management Information Systems, or a related field.</p> <p>Minimum of 4 years experience.</p> <p>Overall experience in information systems; background experience in ETL processes, application development, report development, and data warehouse projects.</p> <h4>Skills:</h4> <ul> <li>Proficient in English written and verbal communication skills.</li> <li>Demonstrates excellent judgment and decision-making skills.</li> <li>Demonstrated time management and priority setting skills.</li> <li>Excellent organizational skills.</li> <li>Possesses strong product knowledge.</li> <li>Possesses strong technical aptitude.</li> </ul></p><p></p>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level electronic maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>USAF equivalent position is Avionics Technician Apprentice.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Applies basic technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities.</li> <li>Requires a basic understanding of the interrelationships of circuits and associated systems.</li> <li>Exercises independent judgment in performing assigned tasks in conjunction with designated direction from Production Staff, Avionic Leads, Avionics/Com Technician IIIs, or Avionics Technician IIs.</li> <li>Uses common and complex test instruments in the performance of assigned duties.</li> <li>Maintains, repairs, and installs various types of electronic equipment and related devices.</li> <li>Applies basic technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations.</li> <li>Must be able to work with limited supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft avionics and/or GCS maintenance experience required.</li> <li>Must have basic knowledge of basic and complex electronics maintenance and repair.</li> <li>Must have basic knowledge of RFF systems, components, and accessories.</li> <li>Must possess general understanding of technical publications related to aircraft electronics maintenance.</li> <li>Must know basic theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.</li> <li>Must be capable of using and reading blueprints, wiring diagrams, and data tables.</li> <li>Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or after the second deployment.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Current IAT Level II certification.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 experience as an avionics technician.</li> <li>Avionics technician experience within the last 10 years.</li> </ul> <h4>Compensation Details:</h4> <p>$34.52 per hour</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits Overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional Information</h4> <p>Original posting date: 05/29/2026 - Until Filled</p> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Result of Service<br>The incumbent will support Agile delivery, product backlog management, quality assurance, vendor performance monitoring, project documentation, and progress reporting.<br> Work Location<br>HQA<br> Expected duration<br>12 months<br> Duties and Responsibilities<br>Scope of work The Business Analyst will serve as the primary link between healthcare stakeholders, the EMR vendor, and internal technical teams to ensure the successful delivery of the Electronic Medical Records (EMR) system. The role is responsible for eliciting, analyzing, documenting, and validating business, clinical, and functional requirements; conducting business process analysis and Fit-Gap assessments; developing functional specifications and other product documentation; and ensuring that proposed solutions align with UNRWA’s operational and clinical workflows. The Business Analyst will also support solution design, review system configurations, coordinate business validation activities, including System Integration Testing (SIT) and User Acceptance Testing (UAT), and facilitate the resolution of functional issues. Throughout the project lifecycle, the incumbent will work collaboratively with stakeholders to ensure that business needs are accurately translated into high-quality, user-centered digital health solutions that support UNRWA’s strategic objectives. Specific Outputs/Tasks include but not limited to: Key Responsibilities 5.1 Business and Technical Requirements • Engage healthcare professionals, business users, technical teams, and other stakeholders to elicit, analyze, validate, and document business, clinical, operational, and technical requirements. • Translate business and clinical requirements into functional specifications, system requirements, user stories, use cases, process flows, and acceptance criteria. • Ensure that requirements are clear, complete, feasible, testable, prioritized, and aligned with the EMR project objectives. • Maintain requirements traceability from initial identification through development, testing, acceptance, and implementation. • Analyze current clinical and administrative workflows and recommend improvements, standardization, and process optimization. • Identify and document functional gaps, dependencies, assumptions, constraints, and non-functional requirements, including performance, security, availability, usability, and interoperability. 2.2 Agile and Product Backlog Management • Support the Product Lead/Product Owner in establishing, maintaining, and prioritizing the EMR product backlog. • Develop and refine user stories, acceptance criteria, technical tasks, and backlog items in collaboration with business users, technical teams, and the vendor. • Ensure backlog items meet agreed readiness criteria before being included in a sprint. • Facilitate or support Agile/Scrum events, including backlog refinement, sprint planning, daily coordination meetings, sprint reviews, demonstrations, and retrospectives. • Monitor sprint commitments, deliverables, dependencies, impediments, and completion against agreed acceptance criteria. • Support the Product Lead in reviewing and accepting completed backlog items and identifying items requiring rework. • Ensure that sprint outcomes, decisions, action points, and lessons learned are properly documented and followed up. 2.3 System Development Lifecycle • Apply sound knowledge of the full system development lifecycle, including discovery, requirements analysis, solution design, development, integration, testing, deployment, stabilization, and post-implementation support. • Review solution designs and technical specifications to confirm alignment with approved business requirements. • Support change-control processes by assessing the business, technical, schedule, and resource implications of proposed changes. • Coordinate requirements clarification between stakeholders and the vendor throughout the development lifecycle. • Identify delivery risks, gaps, and inconsistencies at an early stage and escalate them to project management with recommended actions. 2.4 Vendor and Deliverables Management • Serve as a key coordination point between the EMR project team and the vendor for requirements, deliverables, testing, and implementation activities. • Review vendor deliverables against contractual requirements, approved specifications, user stories, acceptance criteria, and the agreed implementation plan. • Track vendor commitments, deliverables, action items, defects, dependencies, and due dates. • Participate in vendor meetings, technical discussions, demonstrations, sprint reviews, and deliverable-acceptance activities. • Identify deviations from approved requirements, quality standards, or delivery timelines and support their resolution and escalation. • Maintain clear records of vendor decisions, clarifications, commitments, and outstanding actions. 2.5 Integration and Data Migration • Support the analysis and documentation of integration requirements between the EMR and relevant corporate, clinical, laboratory, reporting, and administrative systems. • Document interface requirements, data flows, data ownership, business rules, field mappings, validation rules, and error-handling requirements. • Collaborate with technical teams and the vendor to ensure secure, reliable, and accurate data exchange. • Support data migration planning, including data mapping, cleansing rules, validation criteria, reconciliation, and migration testing. • Participate in the validation of migrated data and integrated workflows to confirm completeness, accuracy, and usability. 2.6 Testing and Quality Assurance • Develop and maintain test strategies, test plans, test scenarios, test cases, test scripts, and expected results based on approved requirements and acceptance criteria. • Coordinate and support functional testing, integration testing, regression testing, system testing, and user acceptance testing. • Work with healthcare professionals and business users to prepare and execute user acceptance testing. • Record, classify, prioritize, and track defects through resolution, retesting, and closure. • Collaborate with quality assurance teams and the vendor to ensure that the EMR meets functional, clinical, technical, usability, and performance requirements. • Maintain traceability between requirements, test cases, defects, and acceptance decisions. • Support the preparation of test completion reports and recommendations for release readiness and production deployment. 2.7 Implementation, Training, and User Adoption • Support implementation, pilot, rollout, stabilization, and post-go-live activities. • Assess implementation readiness and identify operational, technical, training, and change-management gaps. • Develop user guides, standard operating procedures, training materials, quick-reference guides, and other user-support documentation. • Support or conduct training sessions for end users, super users, and system administrators, as applicable. • Gather and analyze end-user feedback and recommend corrective actions and system improvements. • Provide functional support during implementation and facilitate the timely resolution of user concerns and system issues. • Support adoption monitoring and document lessons learned from pilot and rollout activities. 2.8 User Experience and Usability • Collaborate with UX/UI designers, healthcare professionals, and the vendor to ensure that system interfaces support efficient and intuitive clinical workflows. • Review wireframes, prototypes, and system demonstrations against approved requirements and usability principles. • Facilitate user-feedback sessions and document recommendations for improving system usability, accessibility, and workflow efficiency. • Ensure that approved UX/UI decisions are reflected in the backlog and traced through development and testing. 2.9 Project Reporting and Documentation • Prepare and maintain project documentation, including requirements specifications, process maps, user stories, acceptance criteria, decision logs, meeting minutes, action trackers, test reports, and implementation records. • Support the preparation of weekly, monthly, management, donor, and governance reports. • Monitor and report on backlog status, sprint progress, vendor deliverables, testing progress, defects, risks, issues, dependencies, and milestones. • Maintain project risks, issues, assumptions, dependencies, and decision logs, and follow up on agreed mitigation actions. • Prepare presentation materials, dashboards, status summaries, and decision papers for project governance bodies and management. • Ensure that project documentation is accurate, current, properly version-controlled, and stored in the designated repository.<br> Qualifications/special skills<br>Bachelor's Degree in computer science, information systems, software engineering, health informatics, business information technology, or a related field. Professional certification in business analysis, Agile/Scrum, product ownership, project management, or software testing is highly desirable. Scrum Product Owner, Scrum Master, PMI-PBA, CBAP, PRINCE2, PMP, or equivalent certification would be an asset. Minimum seven (6) years of relevant professional experience. • Relevant professional experience in technical business analysis, digital transformation, software implementation, or information systems projects. • Demonstrated hands-on experience across the system development lifecycle. • Strong practical experience with Agile/Scrum delivery and product backlog management. • Proven experience developing user stories, acceptance criteria, functional specifications, process flows, and test cases. • Experience facilitating backlog refinement, sprint planning, sprint reviews, demonstrations, and retrospectives. • Experience coordinating vendors and reviewing vendor deliverables against agreed requirements and acceptance criteria. • Practical experience in system testing, defect management, quality assurance, and user acceptance testing. • Experience with system integrations, APIs, data mapping, or data migration is highly desirable. • Experience in EMR, healthcare information systems, or other complex enterprise systems is strongly preferred. • Experience preparing management reports, project documentation, presentations, and governance materials.<br> Languages<br>English and Arabic are the working languages of UNRWA. For this assignment, fluency in both Arabic and English are required.<br> Additional Information<br>CONDITIONS OF SERVICE • The consultancy is based in UNRWA HQA Amman. • The consultancy is for local candidates. • The selected candidate will receive a monthly remuneration that is amounting to JOD 1,190.44 for every fully completed month. • The duration of the Contract is for 12 months, and the possibility of extension is subject to the availability of funds and continuing need and satisfactory performance. • As part of Digital Impact, Technology and Innovation Department (DITID)and digital workspace the role works under the overall supervision of the Senior Project Manager (Health Info Sys).<br> No Fee<br>THE UNITED NATIONS DOES NOT CHARGE A FEE AT ANY STAGE OF THE RECRUITMENT PROCESS (APPLICATION, INTERVIEW MEETING, PROCESSING, OR TRAINING). THE UNITED NATIONS DOES NOT CONCERN ITSELF WITH INFORMATION ON APPLICANTS’ BANK ACCOUNTS.<br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>1&nbsp;&nbsp;BACKGROUND</p><p>Job Title:&nbsp;&nbsp;Technical Support Engineer&nbsp;</p><p>Location:&nbsp;&nbsp;Jordan-International</p><p>Reference ID:&nbsp;&nbsp;ST-JOB-20260715-TSE</p><p>Posting Date:&nbsp;&nbsp;July 15th, 2026</p><p>Resumes:&nbsp;&nbsp;Please visit Seethru.ai contact page.</p><p><br></p><p>1.1&nbsp;&nbsp;ABOUT SEETHRU AI</p><p>Seethru AI Inc. is a leading manufacturer of x-ray technology for cargo inspection, with headquarters near Boston—USA, and a global network of partners. The role posted herein is based in Jordan and supports the operations in Jordan and globally. Interested applicants are encouraged to email their resumes to our contact page at seethru.ai.</p><p><br></p><p>1.2&nbsp;&nbsp;ROLE DESCRIPTION</p><p>Technical Support Engineer, supporting operations in the factory and field preventive and corrective maintenance, installation, and training for Seethru AI x-ray inspection equipment. The role will be based in Jordan and support Seethru equipment worldwide.</p><p><br></p><p>1.3&nbsp;&nbsp;TRAVEL</p><p>This job requires 25% - 50% travel to support new or existing customers.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>2&nbsp;&nbsp;MINIMUM REQUIREMENTS</p><p>2.1&nbsp;&nbsp;EDUCATION</p><p>B.S. Engineering degree in Electrical, Mechanical, Industrial, Communications, or similar discipline.</p><p><br></p><p>2.2&nbsp;&nbsp;ENGLISH LANGUAGE PROFICIENCY</p><p>Proficient in English; reading, writing, and speaking.</p><p><br></p><p>2.3&nbsp;&nbsp;RESOURCFULL AND SELF-LEARNER</p><p>The successful candidate is not expected to have experience with similar technologies, hence Seethru will provide training. It is very important, however, for the successful candidate to be resourceful and able to find solutions for new problems unseen before.</p><p><br></p><p>2.4&nbsp;&nbsp;SKILLS</p><ol><li>ELECTRICAL: Theoretical understanding and physical handing of electrical circuits with Direct and Alternating Current (DC/AC), Power, Voltage, Current, and Wiring. Shall be able to debug electrical wiring diagrams and circuits.</li><li>MECHANICAL: Principles of Mechanical systems and related Physics including Power, Torque, and Heating and Cooling.</li><li>COMPUTER: Very good working knowledge of Microsoft Windows computers and networks, covering: (a) Operating system and Microsoft Office suite: Outlook, Word, Excel, and PowerPoint; (b) Good understanding of computer networks, with emphasis on TCP/IP v4, IP addresses, and subnets. Configuring WiFi and Ethernet LAN; (c) Good working knowledge with Windows Command Prompt.</li><li>COMMUNICATIONS: Excellent communication skills with Seethru team members, suppliers, and customers. Given the nature of the business, most communications shall be in English.</li><li>TEAM PLAY: Shall be a team player, treating fellow team members with mutual respect.</li><li>TRAINING: Shall be able to train customer on Seethru technologies in Jordan and abroad.</li></ol><p><br></p><p>3&nbsp;&nbsp;RELEVANT EXPERIENCE</p><p>Two (or more) years of relevant experience is highly desired but may be substituted with strong academic credentials and understanding of the required skills above.</p><p>3.1&nbsp;&nbsp;ADDITIONAL EXPERIENCE</p><p>Experience in these areas is not a must, but a strong plus: HVAC, Induction Motors and Motor Drive Controllers, Control Systems, Serial Communications (RS485, RS232, Modbus), PLCs, Teaching, and CCTV Camera Systems.</p><p><br></p><p>4&nbsp;&nbsp;COMPENSATION</p><p>We offer competitive compensation packages, which will be determined based on skills and experience.</p><p><br></p><p>5&nbsp;&nbsp;JOB DUTIES</p><p>As a Technical Support Engineer, travel inside or outside Jordan is expected to support customers. The job duties include the following:</p><ol><li>Support the operations activities in Jordan including Electrical, Mechanical, and Software.</li><li>Respond to customer technical inquires, support diagnostic and resolution of customer technical issues. Support may be performed remotely or may require travel to customer sites.</li><li>Support installation and commissioning of equipment at customer sites.</li><li>Provide technical training to customers on the operation and maintenance of equipment.</li><li>Perform Factory and Site Acceptance Tests (FAT/SAT).</li></ol></div>