Class B Drivers Jobs

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engine in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Journeyman.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic/hydraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work without supervision.</li> <li>Provides technical and directional leadership guidance to lower-level aircraft mechanics.</li> <li>Provides training to lower-level aircraft mechanics.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of three years of actual aircraft mechanic maintenance experience required.</li> <li>Minimum of one year experience on MQ-9 aircraft, as an aircraft mechanic.</li> <li>Must have comprehensive knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess comprehensive knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a comprehensive understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul> <h4>Compensation details:</h4> <p>$36.26 per hour</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Company description</h4> <p>Join a hotel that is a member of the Accor network, whose group brings together more than 45 brands, 5,500 hotels, 10,000 restaurants and lifestyle destinations. Here, we believe in you and what you bring to the table. There are many opportunities for development and advancement. Every gesture, every smile, every action, contributes to creating a positive and memorable impact for our customers, our colleagues and also for our planet. Together, we embody the vision of responsible hospitality.</p> <p>Take the opportunity to become a Heartist® and let your heart guide you in this world where life beats faster.</p> <h4>Job description</h4> <p>Responsible for medication administration of the resort clinic.<br> May be responsible for clinical system tracking (i.e. wounds or infection control) under the direction of the resort doctor.<br> Provide general consultation regarding health-related concerns of guest and team members.<br> Respond quickly to all emergencies.<br> Provide first aid as needed.<br> Maintain confidentiality of guest and staff information.</p> <h4>Qualifications</h4> <ul> <li>BA in Nursing</li> <li>Must have a Jordanian Practical or Vocational Nurse’s License</li> <li>Must be CPR certified</li> <li>Experience working in senior care or a related field</li> <li>Ability to work as part of a team and handle multiple tasks safely and effectively</li> <li>Flexibility to work in different shifts</li> <li>Proficient verbal and written communication skills</li> <li>Dedicated, compassionate, and energetic</li> </ul> <h4>Additional information</h4> <ul> <li>Hotel experience is an advantage</li> <li>Excellent command of English</li> </ul></p><p></p>

<p><strong>REQUEST FOR QUOTATION NOTICE</strong></p> <p>&nbsp;</p> <p>INVITATION TO REQUEST FOR QUOTATION FOR THE PROVISION OF POST-RETURN EXPERIENCE AND REINTEGRATION PATHWAYS: SYRIAN RETURNEES (IDP, JORDAN AND LEBANON REFUGEE RETURNEES) CONSULTANCY SERVICE</p> <p>&nbsp;</p> <p><strong>[RFQ/MENA/26/005]</strong></p> <p>&nbsp;</p> <p>Following the fall of the Assad government in December 2024, the pace of return movements from Jordan and Lebanon has accelerated. While humanitarian actors have invested significantly in tracking intentions to return and return movements, far less is known about what actually happens after return, and almost nothing has been systematically documented about what enables successful, sustainable reintegration as opposed to what causes it to fail. This evidence gap has direct programmatic consequences. INGOs operating in Syria's return areas are making decisions about reception support, livelihood programming, shelter, and community cohesion with limited grounding in the lived experiences of returnees themselves. We lack qualitative evidence that would allow better identification of what works- the conditions, assets, relationships, and support mechanisms that returnees themselves associate with positive reintegration pathways and outcomes1- distinct from cataloguing barriers and protection risks.&nbsp; This research piece would address that gap with an explicit solutions orientation: the primary analytical question is what successful early reintegration looks like and how we can support more of it, rather than what is going wrong for returnees. This study is designed as a pilot, with strong programmatic utility, while generating the evidence base and case for a broader multi-site phase 2, which could be fundraised for. This study is intended to complement rather than duplicate existing quantitative intention surveys including UNHCR's ePRIS and complement work led by the Solutions Working Group inside Syria and the various Durable Solutions coordination architectures that exist at country and regional level. This study is designed as a pilot to provide both a standalone evidence contribution and the foundation for a potential phase 2 study across two to three additional governorates, inclusion of a re-displaced secondary sample (both inside Syria and cross-border movements back to Lebanon), measuring the distinction between rural areas supported with humanitarian programming;&nbsp; and a longitudinal follow-up component</p> <p>&nbsp;</p> <p><strong>Deadline for Bids:</strong></p> <p>Deadline for bid submission is 02.08.2026 - 13:00 PM&nbsp; Amman time.</p> <p>&nbsp;</p> <p>Please submit your bid by uploading all files to the e-tender box (eTB) web site - the link is included in the file</p> <p><em>0_LINK TO UPLOAD BID.pdf</em>, which you downloaded together with this tender package.</p> <p>&nbsp;</p> <p><em>In order to avoid technical problems, please note that you can upload as many files as it is required, but the <u>single file size is limited to 10 MB</u> each, and it is <u>not allowed to upload zip, rar or 7z&nbsp; file</u>. Files with the same file name cannot be uploaded twice.</em></p> <p>&nbsp;</p> <p>After successful bid submission, you will receive an e-mail confirmation from the eTB system, with the list of submitted files. If you notice that some files have not been successfully uploaded (e.g. due to the internet interruption), please submit missing file(s) again and please put MF after the company name (example: ABC company MF).</p> <p>&nbsp;</p> <p>If you need to submit a revised bid before the deadline, the Company name in the eTB system should be modified by adding “2” after the Company&nbsp; name and the latest submission will be considered as the final bid. (Example: ABC company 2)</p> <p>&nbsp;</p> <p>If you have any technical questions please use the link available also in downloaded file <em>0_LINK TO UPLOAD BID.pdf</em>&nbsp; before 26.07.2026. After submitting your question, you will receive an e-mail confirmation from eTB system.</p> <p>&nbsp;</p> <p>If you do not receive confirmation e-mails, or in case of technical problems, please contact <a href="mailto:jo.contact@nrc.no">jo.contact@nrc.no</a></p> <p>&nbsp;</p> <p><strong>Complete RFQ documents can be obtained, free of charge from 19 July 2026 until 02 August 2026, 12:00 pm (Amman Time) , by accessing the following link:</strong></p> <p>&nbsp;</p> <p><a href="https://etbsystem.no/ClientTrans/Download?ID=DhUoFCVJ3y0%3d"><strong>https://etbsystem.no/ClientTrans/Download?ID=DhUoFCVJ3y0%3d</strong></a></p> <p>If you do not receive an e-mail, or in case of technical problems, please contact <a href="mailto:jo.contact@nrc.no">jo.contact@nrc.no</a>&nbsp; with email subject as: (RFQ/MENA/26/005) – Technical Enquiry</p> <p>Regards,</p> <p>NRC Procurement Unit</p> <p>&nbsp;</p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul> <h4>Compensation details:</h4> <p>$34.17 per hour</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting date: 05/06/2026 - Until filled</p> <p>The job requisition is expected to remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul> <h4>Compensation details</h4> <p>34.17</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting: 05/05/2026 - 05/09/2026</p> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under federal laws and supplemental language at labor laws posters.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Your Day-to-Day (What You'll Do)</strong><ul><li><p><strong>Guest Relations:</strong> Greet all guests warmly upon arrival and departure. Escort guests to rooms, explain room features, provide property tours, and assist with directions and general inquiries.</p><br></li><li><p><strong>Operational Excellence:</strong> Deliver and retrieve guest luggage safely and promptly using proper equipment. Maintain a clean, organized lobby, bell desk, and luggage room.</p><br></li><li><p><strong>Valet &amp; Transportation:</strong> Safely Park and retrieve guest vehicles. Support guest transportation arrangements. Provide full information on hotel facilities and emergency procedures.</p><br></li><li><p><strong>Administrative Accuracy:</strong> Accurately tag and store luggage, and maintain logbooks for luggage storage, VIP services, and shuttle schedules. Report incidents or special requests to the Bell Captain.</p><br></li><li><p><strong>Team Support:</strong> Assist colleagues with group arrivals/departures and follow instructions from the Bell Captain and Front Office team. Always maintain pristine grooming and uniform standards.</p><br></li></ul><strong>What We Are Looking For</strong><ul><li><p><strong>Valid Driver’s License:</strong> A clean, valid driver’s license and the ability to safely operate various types of vehicles.</p><br></li><li><p><strong>Physical Stamina:</strong> Ability to lift, push, pull, and carry heavy luggage, and spend shifts standing, walking, and moving in various weather conditions.</p><br></li><li><p>A naturally warm, friendly personality with excellent communication and team-player skills.</p><br></li><li><p>Flexibility to work various shifts, including weekends and holidays.</p><br></li></ul><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Prepare special meals or substitute items. Regulate temperature of ovens, broilers, grills, and roasters. Pull food from freezer storage to thaw in the refrigerator. Ensure proper portion, arrangement, and food garnish. Maintain food logs. Monitor the quality and quantity of food that is prepared. Communicate assistance needed during busy periods. Inform Chef of excess food items for use in daily specials. Inform Food &amp; Beverage service staff of menu specials and out of stock menu items. Ensure the quality of the food items. Prepare and cook food according to recipes, quality standards, presentation standards, and food preparation checklist. Prepare cold foods. Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees; serve as a role model. Follow all company and safety and security policies and procedures; report maintenance needs, accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Anticipate and address guests service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards. Stand, sit, or walk for an extended period of time. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education: Technical, Trade, or Vocational School Degree. Related Work Experience: At least 3 years of related work experience. Supervisory Experience: No supervisory experience. License or Certification: None</p><p></p></section>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul> <h4>Compensation details:</h4> <p>$34.17 per hour</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting date: 05/06/2026 - Until filled</p> <p>The job requisition is expected to remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair / replacement experience.</li> </ul> <h4>Compensation details:</h4> <p>34.17</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair / replacement experience.</li> </ul> <h4>Compensation details:</h4> <p>34.17</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Prepare special meals or substitute items. Regulate temperature of ovens, broilers, grills, and roasters. Pull food from freezer storage to thaw in the refrigerator. Ensure proper portion, arrangement, and food garnish. Maintain food logs. Monitor the quality and quantity of food that is prepared. Communicate assistance needed during busy periods. Inform Chef of excess food items for use in daily specials. Inform Food &amp; Beverage service staff of menu specials and out of stock menu items. Ensure the quality of the food items. Prepare and cook food according to recipes, quality standards, presentation standards, and food preparation checklist. Prepare cold foods.<br>Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees; serve as a role model. Follow all company and safety and security policies and procedures; report maintenance needs, accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Anticipate and address guests’ service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards. Stand, sit, or walk for an extended period of time. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.<br>PREFERRED QUALIFICATION<br>Education: Technical, Trade, or Vocational School Degree.<br>Related Work Experience: At least 3 years of related work experience.<br>Supervisory Experience: No supervisory experience.<br>License or Certification: None<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>Combining timeless glamour with a vanguard spirit, St. Regis Hotels &amp; Resorts is committed to delivering exquisite experiences at more than 50 luxury hotels and resorts in the best addresses around the world. Beginning with the debut of The St. Regis hotel in New York by John Jacob Astor IV at the dawn of the twentieth century, the brand has remained committed to an uncompromising level of bespoke and anticipatory service for all of its guests, delivered flawlessly by a team of gracious hosts that combine classic sophistication and modern sensibility, as well as our signature Butler Service. We invite you to explore careers at St. Regis. In joining St. Regis, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Answer patients' questions and determine how to assist them. Record patient symptoms, medical information, and changes in condition. Make referrals if necessary. Measure and record patients' vital signs. Recommend and implement patient care plans and interventions based on assessment of patient conditions. Administer medications or start intravenous fluids and note times and amounts. Provide basic patient care and treatments, such as taking temperatures/blood pressures, cleaning/dressing wounds, massaging muscles, or delivering hot/cold applications. Administer emergency treatment for injuries/illnesses; arrange medical care if necessary. Inform employer/employees of health problems to minimize or eliminate potential illness risks. Record, store, and maintain guests' assessment and counseling information. Maintain up-to-date knowledge of professional area, seek additional information when presented with unfamiliar situations; participate in ongoing professional development. Follow all company policies and procedures; report accidents, injuries, and unsafe work conditions to manager; use proper equipment; wear appropriate personal protective clothing. Maintain confidentiality of proprietary information; protect company assets. Anticipate and address guests service needs. Discuss work topics discreetly and quietly; speak with others using clear and professional language. Ensure employee compliance with company standards/policies and external regulations. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Comply with quality assurance expectations and standards. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 10 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Education: Bachelor's degree from accredited university or college.</li><li>Related Work Experience: At least 3 years of related work experience.</li><li>Supervisory Experience: No supervisory experience.</li><li>License or Certification: Professional licensure as Registered Nurse in state of practice.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>About Us:</b></p><p>At Angstrom, we specialize in delivering precise and efficient medical billing services to healthcare providers. Our mission is to streamline billing processes and enhance financial outcomes for our clients. We are currently seeking a skilled and dedicated *KPI &amp; Performance Metrics Consultant* to join our team and ensure the accuracy and timeliness of the operational and evaluation processes.</p><p><br></p><p><b>About The Project:</b></p><p>As we are preparing to scale past 100+ employees, we strive towards a performance framework that is both immediately actionable and scalable.</p><p>We need an expert consultant to bridge the gap between our strategic vision and day-to-day operations through a mathematically sound to track performance across three levels: individual employees, team processes, and macro company performance.</p><p>Crucially, this operational framework should align with our company culture. By integrating our core operational metrics today, we will lay the groundwork for a future, secondary initiative dedicated to HR analytics, employee retention, and long-term career tracking.</p><p><br></p><p><b>What You'll Do</b></p><ul><li><b>Audit &amp; Alignment:</b> Review our current data setups (currently Google Sheets/Docs and Google Looker Studio) and existing metrics. Talk with our department heads to understand how their workflows operate.</li><li><b>KPI Framework Design: </b>Build out a clean, practical system of metrics spanning individual, team, and company levels—focused heavily on volume, quality, and accuracy tracking, including a weighted scoring model for individual performance reviews.</li><li><b>Data Flow Mapping: </b>Review how we currently collect data, flag any bottleneck areas or scale limitations, and help us map out how this data will eventually flow into a more automated cloud database. We are open to recommending new tools if our current setup won't scale.</li><li><b>Dashboard Specs:</b> Create clear wireframes and functional blueprints for dashboards at each level—individual, team, and executive/company—so our development team knows exactly what to build.</li><li><b>Data Governance Rules: </b>Put together a straightforward plan for who owns which metric, how often teams should review them (weekly/monthly), and how to maintain data integrity across the board.</li><li><b>Culture Alignment: </b>Where possible, design the framework so it could later extend into HR/culture metrics (retention, development, growth), without expanding current scope or deliverables.</li></ul><p><br></p><p><b>Deliverables:</b></p><ul><li>A finalized KPI Matrix with precise metric definitions, targets, and internal owners—covering individual, team, and company levels.</li><li>A clear Specification Document and layout wireframes for our dashboard builders, for all three reporting levels.</li><li>A Data Governance &amp; Review Cadence Plan.</li><li>A brief Implementation &amp; Maintenance Guide to keep everything running consistently long-term.</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>5+ years of hands-on experience designing KPI frameworks, performance scorecards, or business intelligence setups.</li><li>A strong background in standard goal-setting methodologies (like OKRs and KPIs) and experience building balanced performance scoring systems.</li><li>Experience designing frameworks that scale with company growth (SMB experience ideal).</li><li>Prior experience building operational or quality-control frameworks in healthcare operations, medical billing, or transactional environments is a strong plus.</li><li>Experience with individual-level performance scoring, with attention to fairness and consistency.</li><li>Comfort with Google Workspace / Looker Studio, and the ability to recommend alternatives if beneficial.</li><li>Excellent communication skills—you need to be able to turn complex data logic into simple, actionable insights that both our leadership team and operations staff can easily grasp.</li></ul></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><div> <p> <strong>POSITION SUMMARY</strong> </p> <p> </p> <p>Prepare special meals or substitute items. Regulate temperature of ovens, broilers, grills, and roasters. Pull food from freezer storage to thaw in the refrigerator. Ensure proper portion, arrangement, and food garnish. Maintain food logs. Monitor the quality and quantity of food that is prepared. Communicate assistance needed during busy periods. Inform Chef of excess food items for use in daily specials. Inform Food &amp; Beverage service staff of menu specials and out of stock menu items. Ensure the quality of the food items. Prepare and cook food according to recipes, quality standards, presentation standards, and food preparation checklist. Prepare cold foods.</p> <p> </p> <p>Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees; serve as a role model. Follow all company and safety and security policies and procedures; report maintenance needs, accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Anticipate and address guests service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards. Stand, sit, or walk for an extended period of time. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.</p> <p> </p> <p>PREFERRED QUALIFICATION</p> <p>Education: Technical, Trade, or Vocational School Degree.</p> <p>Related Work Experience: At least 3 years of related work experience.</p> <p>Supervisory Experience: No supervisory experience.</p> <p>License or Certification: None</p> <p> </p> <p> </p> </div> <div> </div> <p> <i>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</i> </p></div></section>

<p><h4>Company description</h4> <p>Join a hotel that is a member of the Accor network, whose group brings together more than 45 brands, 5,500 hotels, 10,000 restaurants and lifestyle destinations. Here, we believe in you and what you bring to the table. There are many opportunities for development and advancement. Every gesture, every smile, every action, contributes to creating a positive and memorable impact for our customers, our colleagues and also for our planet. Together, we embody the vision of responsible hospitality.</p> <p>Take the opportunity to become a Heartist®, and let your heart guide you in this world where life beats faster.</p> <h4>Job description</h4> <ul> <li>Consistently offer professional, friendly and engaging service.</li> <li>Greet, check in and settle guest accounts while ensuring all service standards are followed.</li> <li>Maintain accurate records of daily transactions and cash handling, which includes currency exchange and balancing a float.</li> <li>Handle guest requests, questions and concerns effectively and promptly.</li> <li>Promote a professional team environment.</li> <li>Follow department policies, procedures and service standards.</li> <li>Perform any and all other tasks assigned by management.</li> <li>Uphold the highest standard of internal and external customer service at all times.</li> </ul> <h4>Qualifications</h4> <ul> <li>Proficient in the English language (verbal and written); a second language is an asset.</li> <li>Required knowledge of Windows Office Suite.</li> <li>Must be able to handle multiple tasks in a dynamic, fast-paced environment.</li> <li>Ability to focus attention on guest needs, remaining calm and courteous at all times.</li> <li>Strong interpersonal and problem-solving abilities.</li> <li>Able to stand for long periods, at least 9 hours per shift.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Benchmark outpatient clinical care, preventive care, promotive care, emergency care, child health, STI management, and life-course health services against current WHO guidance and international family medicine standards. Draft and revise updated clinical content for priority conditions, including the ten most common diseases managed at UNRWA health centres, child health protocols, STI diagnosis and treatment, rational prescribing, and antibiotic stewardship. Integrate patient-centred, family-centred, preventive, and life-course approaches across relevant clinical protocols. Coordinate technical consultations with UNRWA focal points and incorporate feedback into a coherent final draft. Design the ToT curriculum, facilitator guide, participant materials, presentations, case studies, competency checklists, pre- and post-test tools, and training evaluation forms. Develop a practical implementation monitoring framework and mechanisms to track field-level implementation progress. Phase 2, 2027: ToT Delivery, Cascade Support, and Implementation Monitoring, One Month During Phase 2, the Consultant shall deliver the ToT and support field-level roll-out of the updated STG-TI. Conduct standardized ToT sessions for selected Senior Medical Officers, Field Family Medicine Specialists, and training focal points across the five fields of operation. Deliver four ToT sessions per field, through in-person or virtual modality as agreed in the final work plan and subject to operational access. Assess trainer readiness through participation, competency checklists, knowledge assessment, and trainer feedback. Support cascade training in each field and provide online support to each trainer during at least one cascade training session Monitor implementation of the updated guidance, document field-level barriers, and provide practical recommendations to improve clinical uptake and training quality. Work Location HQA Expected duration 4 months Duties and Responsibilities The overall objective is to review, update, and operationalize the UNRWA STG-TI through an evidence-based technical revision, a structured ToT package, field-level training support, and practical monitoring arrangements. 1. Evidence-based clinical review. Review the existing STG-TI with priority focus on general outpatient clinical management, the ten most common diseases managed at UNRWA health centres, child health protocols, and diagnosis and treatment of sexually transmitted infections. 2. Clinical alignment and thematic strengthening. Align the updated guidance with current WHO standards and international family medicine practice within UNRWA s primary health care delivery context, with emphasis on holistic care, family-centered care, symptom-based clinical reasoning, and rational prescribing. 3. Finalization of updated guidance. Revise and finalize the STG-TI in close coordination with UNRWA technical staff, ensuring technical accuracy, internal consistency, clarity, and operational feasibility across all fields. 4. Training of Trainers package. Develop a modular ToT curriculum and training materials directly mapped to the updated STG-TI, including training objectives, competencies, session plans, case studies, presentations, assessment tools, and trainer guidance. 5. ToT delivery and cascade support. Conduct four standardized ToT sessions per field of operation, unless otherwise agreed with UNRWA, and provide online support to each trainer during at least one cascade training session. 6. Implementation monitoring. Support UNRWA to monitor implementation of the updated guidance. Additional Information Hybrid modality, with a 40% level of engagement during each active month.&nbsp;</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Advanced university degree or postgraduate specialization in Family Medicine, such as Jordanian Board, Arab Board, or equivalent internationally recognized qualification. A closely related clinical primary health care discipline should be considered where relevant. A Bachelor of Medicine and Bachelor of Surgery or Medical Doctor degree combined with extensive clinical experience and strong clinical guideline development credentials shall be considered on a case-by-case basis.</li><li>At least eight years of progressively responsible professional experience in family medicine, clinical practice, primary health care, clinical guideline development, or health systems advisory work.</li><li>Excellent analytical, technical writing, editing, facilitation, and presentation skills.</li><li>Fluency in spoken and written English is required.</li><li>Working knowledge of Arabic is an asset.</li></ul><p></p></section>

<p><strong>Job Title:</strong> Project Assistant</p> <p><strong>Department:</strong> Operations</p> <p><strong>Working time:</strong>&nbsp;Full Time (100%)</p> <p><strong>Contract Type and Duration:</strong> Fixed Term for 10 months</p> <p><strong>Location:</strong> Amman and Zarqa, Jordan</p> <p><strong>Job Purpose</strong></p> <p>The Project Assistant will provide direct support to the implementation of MAG’s Weapons and Ammunition Management (WAM) project activities, including training project delivery. The role is task-oriented and will involve assisting senior staff in administrative, logistical, and field-related duties to ensure the smooth execution of training and operational activities.</p> <p>The position requires a reliable and flexible individual capable of carrying out assigned tasks efficiently across different WAM functions.</p> <p><strong>Principal Responsibilities</strong></p> <p>Training Support</p> <ul> <li>Assist in preparing training venues by arranging materials, equipment, and other logistical requirements.</li> <li>Receive training materials from the logistics team and ensure they are properly organised and available for training sessions.</li> <li>Support trainers and Technical Field Managers during the delivery of training activities.</li> <li>Assist with participant registration, maintain attendance records, and ensure proper documentation during training.</li> <li>Provide general administrative and logistical support throughout training activities.</li> <li>Support WAM staff during field activities, including site visits and technical tasks as required.</li> <li>Assist in preparing, organising, and handling materials and equipment used in WAM activities.</li> <li>Support the tracking, storage, and management of consumables and operational items, and report any shortages to the line manager.</li> <li>Perform data entry and maintain basic records related to project activities.</li> <li>Carry out administrative duties such as filing, document preparation, record maintenance, staff daily attendance tracking, and monthly timesheet support.</li> <li>Maintain organised physical and electronic filing systems.</li> <li>Provide Arabic–English translation support when required.</li> <li>Assist with routine office tasks to ensure the smooth implementation of WAM activities.</li> <li>Drive the project vehicle (van) when required and transport trainees to and from training venues.</li> </ul> <p>Requirements</p> <ul> <li>Must have a good understanding of filing systems and data entry.</li> <li>Must have the ability to read and write in Arabic and in English language.</li> <li>Must be computer literate with Excel, Word, and PowerPoint.</li> <li>Preferably have a good understanding of relevant MAG operational reporting formats.</li> <li>Driving License: Valid driving license to drive a van</li> <li>Experience: At least 1 year of relevant experience in administrative support, training logistics, field activities, or similar roles.</li> <li>Education: Bachelor’s degree in business administration, public Administration, international relations, political science, management, or communications is required or equivalent study and experience.</li> </ul> <p><strong>GENERAL</strong></p> <p>All MAG staff are expected to undertake the following general duties:</p> <ul> <li>Work towards achieving departmental business plan objectives.</li> <li>Work within the framework of MAG’s core values, promoting its ethos and mission statement.</li> <li>Work as part of a team and liaise with other departments to ensure effective communication across the organisation.</li> <li>Ensure familiarity with and adherence to all MAG policies and procedures and the Safeguarding framework.</li> <li>Ensure confidentiality of information as required by MAG policies and procedures.</li> <li>Undertake any other duties appropriate to the post as may be required.</li> <li>Aware of gender mainstreaming and ready to participate in gender awareness courses/training</li> <li>Able to work in a mixed team</li> <li>Undertake and apply learning from appropriate training and development programmes.</li> <li>Understand and uphold the standards outlined in MAG’s Safeguarding Framework, acting with due care and attention to safeguard the wellbeing of anyone that comes into contact with MAG’s work and reporting concerns if they do arise.</li> </ul>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Maintains an Aircraft Scheduling and Documentation (ASD) maintenance and utilization program. Helps develop long range plans and establishes production schedules to meet customer requirements.</p> <p>Prepares weekly, monthly, quarterly, and annual utilization schedules for maintenance. Maintains proficiency in operations of the USAF Maintenance Information System including Core Automated Maintenance System (CAMS), Centralized Engine Management System (CEMS), and other maintenance management database library programs. Maintains equipment records in library files. Collects, reviews, and files documented information for planning and scheduling of various maintenance activities. Ensures accurate documentation is maintained for aircraft engines, munitions, missiles, AGE configurations, Time Compliance Technical Orders, time change items, and special inspections.</p> <p>USAF equivalent position is Aircraft Scheduling & Documentation Journeyman.</p> <h4>Essential responsibilities:</h4> <ul> <li>Prepares the weekly, monthly, quarterly, and annual utilization schedules for maintenance.</li> <li>Assist in the oversight of the TCTO process for completion and proper documentation with IMDS and/or CEMS.</li> <li>Supervises/maintains assigned aircraft/equipment records in database library files within IMDS and/or CEMS.</li> <li>Assists in the collection, review, and filing of documented information for planning and scheduling of RPA maintenance activities.</li> <li>Ensure accurate documentation is maintained for aircraft engines, munitions, missiles, AGE configurations, Time Compliance Technical Orders, time change items, and special inspections.</li> <li>Performs and documents training of lower ASD personnel to ensure mission readiness, as required.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma, or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of three years actual Aircraft Plans & Scheduling experience required.</li> <li>Must possess comprehensive planning and organizational skills.</li> <li>Must be able to work under deadlines with minimal supervision.</li> <li>Must be able to gain/maintain CEMS access for Engine Management purposes.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active U.S. driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Plans and scheduling experience within the last 10 years.</li> <li>Minimum of two years’ experience in operations of the USAF MIS, including CAMS/IMDS.</li> <li>RPA operations & deployment experience.</li> <li>Previous experience as engine manager with CEMS experience.</li> <li>Prior experience as a defense contractor.</li> <li>Previous MQ-9 plans and scheduling experience desired.</li> </ul> <h4>Compensation details:</h4> <p>35.25</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information:</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Prepare ingredients for cooking, including portioning, chopping, and storing food. Wash and peel fresh fruits and vegetables. Weigh, measure, and mix ingredients. Prepare and cook food according to recipes, quality standards, presentation standards, and food preparation checklist. Prepare cold foods. Operate ovens, stoves, grills, microwaves, and fryers. Test foods to determine if they have been cooked sufficiently. Monitor food quality while preparing food. Set-up and break down work station. Serve food in proper portions onto proper receptacles. Wash and disinfect kitchen area, tables, tools, knives, and equipment. Check and ensure the correctness of the temperature of appliances and food. Follow all company and safety and security policies and procedures; report maintenance needs, accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Speak with others using clear and professional language. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards. Stand, sit, or walk for an extended period of time or for an entire work shift. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education: High school diploma or G.E.D. equivalent. Related Work Experience: At least 1 year of related work experience. Supervisory Experience: No supervisory experience. License or Certification: None</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Prepare ingredients for cooking, including portioning, chopping, and storing food. Wash and peel fresh fruits and vegetables. Weigh, measure, and mix ingredients. Prepare and cook food according to recipes, quality standards, presentation standards, and food preparation checklist. Prepare cold foods. Operate ovens, stoves, grills, microwaves, and fryers. Test foods to determine if they have been cooked sufficiently. Monitor food quality while preparing food. Set-up and break down work station. Serve food in proper portions onto proper receptacles. Wash and disinfect kitchen area, tables, tools, knives, and equipment. Check and ensure the correctness of the temperature of appliances and food. Follow all company and safety and security policies and procedures; report maintenance needs, accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Speak with others using clear and professional language. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards. Stand, sit, or walk for an extended period of time or for an entire work shift. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>PREFERRED QUALIFICATION Education: High school diploma or G.E.D. equivalent. Related Work Experience: At least 1 year of related work experience. Supervisory Experience: No supervisory experience. License or Certification: None</p><p></p></section>