Embedded Systems Engineer Jobs in Jordan

<p>Who We Are: Headquartered in Washington, DC, Versar Global Solutions provides full mission lifecycle solutions for challenges faced by our government and commercial Customers in the natural, built, and digital environments. With team members located around the world, and a rich legacy spanning more than 50 years, Versar Global Solutions delivers a broad array of planning, analysis and risk management solutions, project and program management, operations and maintenance services, and information technology applications for environmental management and remediation projects, mission critical facilities and installations, and in support of readiness and contingency operations. NOTE: This positions is contingent upon award of work.</p><p>Who You Are: The Information Technology (IT) Specialist will provide on-site ASG-J installation IT support, administration, and maintenance for secure and non-secure networks and Command and Control (C2) systems. The position will support users and systems across ASG-J installations within Jordan and assist with Information Assurance, cybersecurity, network, workstation, and operational IT requirements in accordance with applicable DoD policies and technical standards.</p><p>What You ll Do: Provide installation-level IT support, administration, troubleshooting, and maintenance for ASG-J users and systems. Support secure and non-secure local area network environments, including NIPR and SIPR systems, as authorized. Support Command and Control (C2) systems and associated user, workstation, peripheral, and connectivity requirements. Troubleshoot hardware, software, network, account, authentication, and user-access issues. Install, configure, operate, maintain, and document applicable workstations, peripherals, network devices, and IT systems within assigned permissions. Support Information Assurance (IA), cybersecurity, vulnerability-management, and system-compliance activities. Assist with implementation and maintenance of applicable DoD cybersecurity controls, technical directives, and configuration requirements. Coordinate account creation, modification, access, and troubleshooting with Government network and cybersecurity personnel. Maintain required system, configuration, inventory, trouble-ticket, and support documentation. Escalate network, cybersecurity, infrastructure, or enterprise-level issues to the appropriate Government support organization. Support approved software installation, patching, updates, imaging, and configuration activities as authorized. Provide technical assistance and customer support to military, civilian, and contractor users. Coordinate with Government communications, network, cybersecurity, and C2 stakeholders to resolve technical issues. Provide IT support across ASG-J installations within Jordan as mission requirements dictate. Protect sensitive information and comply with applicable DoD cybersecurity, acceptable-use, and information-protection requirements.</p><p>What You ll Bring: Bachelor's degree in information technology, computer science, cybersecurity, information systems, or a related field; substantial relevant DoD IT experience may be considered in lieu of degree requirements. Minimum of four years of relevant IT support, systems administration, network support, cybersecurity, or related technical experience. Demonstrated hands-on experience supporting enterprise IT environments, networks, systems, workstations, and end users. Experience supporting DoD or military IT environments, or comparable secure enterprise environments. Working knowledge of network troubleshooting, Microsoft Windows environments, user accounts, hardware, software, and peripheral support. Knowledge of cybersecurity and Information Assurance principles applicable to enterprise IT operations. Ability to document technical issues, corrective actions, configurations, and support activities. Strong customer service, troubleshooting, communication, and organizational skills. Ability to obtain and maintain a Secret security clearance and applicable privileged/system access. Ability to obtain and maintain any DoD cybersecurity workforce certification required for assigned duties and access level. Ability to meet and sustain all applicable medical, deployment, and theater-entry requirements for Jordan. Successful results of preemployment screenings, including federal background check, MVR, and drug screen. Comply with the company's drug and alcohol policy. Preferred qualifications Current Secret clearance. Previous experience supporting NIPR, SIPR, or other DoD enterprise network environments. Experience supporting military Command and Control (C2) systems. Current DoD 8140/8570-aligned cybersecurity certification appropriate to the assigned duties, such as Security+ or higher, if required by the Government. Experience with Active Directory, Microsoft enterprise environments, endpoint support, network troubleshooting, and DoD trouble-ticket processes. Experience supporting deployed, OCONUS, or CENTCOM IT operations. Prior experience in Jordan or another overseas U.S. military environment.</p><p>Security Requirements ASG-J has not yet specified a formal clearance level or certification baseline for this position. Because the validated scope includes NIPR/SIPR and C2 support, initial recruiting should target candidates who currently possess, or are eligible to obtain and maintain, at least a Secret clearance and who can satisfy applicable DoD cybersecurity workforce requirements. Final clearance, certification, privileged-access, and system-access requirements will be aligned to the executed contract modification.</p><p>Work Environment This position is anticipated to be full-time and on-site in Jordan, Monday through Friday, eight hours per day. The employee must satisfy applicable U.S. Government, host-nation, installation-access, medical, credentialing, deployment, and theater-entry requirements associated with performance in Jordan.</p><p>Note This description is a recruiting and pricing working draft. Final duties, qualifications, clearance levels, certifications, and access requirements remain subject to the executed contract modification and Government direction.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p>Bachelor's degree in information technology, computer science, cybersecurity, information systems, or a related field; substantial relevant DoD IT experience may be considered in lieu of degree requirements. Minimum of four years of relevant IT support, systems administration, network support, cybersecurity, or related technical experience. Demonstrated hands-on experience supporting enterprise IT environments, networks, systems, workstations, and end users. Experience supporting DoD or military IT environments, or comparable secure enterprise environments. Working knowledge of network troubleshooting, Microsoft Windows environments, user accounts, hardware, software, and peripheral support. Knowledge of cybersecurity and Information Assurance principles applicable to enterprise IT operations. Ability to document technical issues, corrective actions, configurations, and support activities. Strong customer service, troubleshooting, communication, and organizational skills. Ability to obtain and maintain a Secret security clearance and applicable privileged/system access. Ability to obtain and maintain any DoD cybersecurity workforce certification required for assigned duties and access level. Ability to meet and sustain all applicable medical, deployment, and theater-entry requirements for Jordan. Successful results of preemployment screenings, including federal background check, MVR, and drug screen. Comply with the company's drug and alcohol policy. Preferred qualifications Current Secret clearance. Previous experience supporting NIPR, SIPR, or other DoD enterprise network environments. Experience supporting military Command and Control (C2) systems. Current DoD 8140/8570-aligned cybersecurity certification appropriate to the assigned duties, such as Security+ or higher, if required by the Government. Experience with Active Directory, Microsoft enterprise environments, endpoint support, network troubleshooting, and DoD trouble-ticket processes. Experience supporting deployed, OCONUS, or CENTCOM IT operations. Prior experience in Jordan or another overseas U.S. military environment.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><br></p><p>Description:</p><p>Our client is a leading large-scale company in the field of healthcare. Renowned for its commitment to operational excellence, the organization offers a dynamic and fast-paced environment for financial professionals looking to advance their careers. Core Responsibilities</p><p>1.Billing &amp; Revenue Cycle Oversight:Daily. Supervise the generation, accuracy, and timely distribution of all medical/service invoices, ensuring compliance with large-scale corporate and healthcare billing guidelines.</p><p>2.Credit Control &amp; Collections:Ongoing. Monitor outstanding balances, manage the collections process, and establish structured follow-up protocols to optimize the company's cash flow.</p><p>3.ERP &amp; Ledger Management:System Control. Maintain and optimize accounts receivable sub-ledgers utilizing large-scale ERP platforms, with a strong preference for Oracle environments.</p><p>4.Reconciliations:Month-End. Perform complex customer account reconciliations, resolve payment discrepancies, and balance the AR sub-ledger against the general ledger.</p><p>5.Financial Reporting: Monthly Close. Prepare periodic aging reports, cash collection forecasts, and bad debt analysis reports directly for the Chief Accountant.</p><p>6.Team Leadership &amp; Audit Support:Supervisory. Lead, mentor, and evaluate the AR staff while serving as the primary point of contact for internal and external auditors reviewing revenue cycles.</p><p>7.Policy Compliance:Continuous. Enforce internal financial control policies, identify procedural bottlenecks, and implement improvements to shorten the Day Sales Outstanding (DSO) cycle.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education: Bachelor s degree (BA) in Finance or Accounting.</p><p>Experience: 8+ years of robust accounting experience, explicitly including time spent in a large-scale enterprise.</p><p>Systems: Hands-on ERP software experience (Oracle preferred).</p><p>Languages: Full bilingual fluency in both Arabic and English (written and spoken).</p><p></p></section>

<p>Responsibilities<br><br>Plan and oversee maintenance, facilities, and engineering activities across the Association s buildings, schools, and assets.<br>Prepare annual project and maintenance plans, technical specifications, budgets, schedules, and tender documents.<br>Supervise construction, engineering, and facility improvement projects, ensuring compliance with specifications, budgets, contracts, and timelines.<br>Manage preventive, corrective, periodic, and emergency maintenance of building systems, equipment, HVAC, generators, water, and electrical/mechanical systems.<br>Monitor the operation, maintenance, and efficiency of solar energy systems and related contracts.<br>Manage the Asset Register, warranties, replacement plans, and facility records.<br>Ensure compliance with health and safety, civil defense, fire protection, and environmental requirements.<br>Coordinate with contractors, consultants, suppliers, engineering offices, and government authorities.<br>Prepare maintenance, project, facility, and budget reports and monitor costs and KPIs.<br>Supervise the maintenance team and ensure effective allocation of work and resources.<br>Provide technical recommendations on procurement, maintenance, contractors, and engineering matters.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in Civil, Electromechanical, Electrical, or Mechanical Engineering.<br>Minimum 7 years of relevant experience in construction projects, facility management, and building maintenance, preferably in educational institutions.<br>CFM or PMP certification is preferred.<br>Strong knowledge of facility management, building systems, maintenance, and construction projects.<br>Knowledge of solar energy systems and renewable energy technologies.<br>Good understanding of safety, civil defense, procurement, and maintenance regulations.<br>Strong project management, planning, budgeting, analytical, and problem-solving skills.<br>Strong leadership and team-management skills.<br>Proficiency in Microsoft Office and maintenance/project management software.<br>Excellent English communication skills, written and verbal.</p>

<p>Essential Responsibilities: The designee shall be qualified to install, sustain, troubleshoot, and repair standard radio frequency wireless, line-of-sight, beyond line-of-sight, wideband, ground-based satellite, and encryption transmission devices. Included are multiple waveform systems operating across the spectrum, keying and signal devices, telemetry, and instrumentation systems. Assembles, connects, secures, and interconnects components such as transmitters, power supplies, and antenna assemblies. Resolves installation, repair, and modification problems associated with communications equipment. Employs orbiting communication satellite, line-of-sight, and tropospheric scatter techniques. Conducts tests to restore and maintain systems. Uses layout drawings, schematics, and pictorial diagrams to solve maintenance problems and ensure equipment is properly positioned. Analyzes construction and operating characteristics of equipment to determine source of malfunction. Performs intricate alignment and calibration procedures to ensure maximum operating efficiency. Reviews and ensures compliance with maintenance management publications and procedures. Enforces safety standards for system maintenance activities. Checks installed and repaired components for compliance with technical publications. Maintains inspection and maintenance records. Posts entries on maintenance and inspection records. Records meter readings and other pertinent data in equipment logs. Completes maintenance data collection forms. Requisitions, accounts for, and turns in supplies and material. The designee shall maintain systems are such as CM-200, CM-300, GRC-171 &amp; 211, GRR-23/24, PCAS, GRT- 21/22, PRC-117F/G, RT-1319, TRC-176, URC-200, EPLRS radio, MIDS LVT 2, MIDS LVT 11,AN/TRC-214, Joint Radio Relay (JR2), Cornet TVCS-L, LHSC, RT9000D, 721S-1, 721S-2, ALE, Have Quick, SINCGARS, KY-100, VSAT VRC-103, TTRS, RT-1747, Sun Air RT-9000, Hawkeye Lite, Ranger 1200, iDirect 850/950 Modem, 2050E Modem, but not be limited to those listed in Table 4.5.1. C2 Systems and Associated Equipment; Table 4.5.4 C2 Air Control Squadron O&amp;M Support.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Position Knowledge, Skills, and Abilities Required: High School diploma or GED. Formal electronics training such as: military technical training school, vocational college, and/or a four (4) year electronics apprentice program with experience in electronics equipment the technician will maintain. Minimum IAT Level II, baseline certification IAW AFMAN 17-1303, IP fundamentals, familiarity with deployable communications systems, RF/SATCOM principles highly desired. Ability to obtain and maintain a US CENTCOM Medical Exam Must have or be able to obtain/maintain a US Government Secret Security Clearance. NOTE: US Citizenship is required to obtain a Secret Clearance.</p>

<p><h4>Essential responsibilities:</h4> <p>The designee shall be qualified to install, sustain, troubleshoot, and repair standard radio frequency wireless, line-of-sight, beyond line-of-sight, wideband, ground-based satellite, and encryption transmission devices. Included are multiple waveform systems operating across the spectrum, keying and signal devices, telemetry, and instrumentation systems. Assembles, connects, secures, and interconnects components such as transmitters, power supplies, and antenna assemblies.</p> <p>Resolves installation, repair, and modification problems associated with communications equipment. Employs orbiting communication satellite, line-of-sight, and tropospheric scatter techniques. Conducts tests to restore and maintain systems. Uses layout drawings, schematics, and pictorial diagrams to solve maintenance problems and ensure equipment is properly positioned. Analyzes construction and operating characteristics of equipment to determine source of malfunction. Performs intricate alignment and calibration procedures to ensure maximum operating efficiency.</p> <p>Reviews and ensures compliance with maintenance management publications and procedures. Enforces safety standards for system maintenance activities. Checks installed and repaired components for compliance with technical publications. Maintains inspection and maintenance records. Posts entries on maintenance and inspection records. Records meter readings and other pertinent data in equipment logs. Completes maintenance data collection forms. Requisitions, accounts for, and turns in supplies and material.</p> <p>The designee shall maintain systems such as CM-200, CM-300, GRC-171 & 211, GRR-23/24, PCAS, GRT-21/22, PRC-117F/G, RT-1319, TRC-176, URC-200, EPLRS radio, MIDS LVT 2, MIDS LVT 11, AN/TRC-214, Joint Radio Relay (JR2), Cornet TVCS-L, LHSC, RT9000D, 721S-1, 721S-2, ALE, Have Quick, SINCGARS, KY-100, VSAT VRC-103, TTRS, RT-1747, Sun Air RT-9000, Hawkeye Lite, Ranger 1200, iDirect 850/950 Modem, 2050E Modem, but not be limited to those listed in Table 4.5.1 C2 Systems and Associated Equipment; Table 4.5.4 C2 Air Control Squadron O&M Support.</p> <h4>Minimum position knowledge, skills, and abilities required:</h4> <p>High school diploma or GED. Formal electronics training such as military technical training school, vocational college, or a four-year electronics apprentice program with experience in electronics equipment the technician will maintain.</p> <p>Minimum IAT Level II, baseline certification in accordance with AFMAN 17-1303, IP fundamentals, familiarity with deployable communications systems, RF/SATCOM principles highly desired.</p> <p>Ability to obtain and maintain a US CENTCOM medical exam.</p> <p>Must have or be able to obtain and maintain a US Government Secret Security Clearance. Note: US citizenship is required to obtain a Secret Clearance.</p></p><p></p>

<p>The designee shall be qualified to install, sustain, troubleshoot, and repair standard radio frequency wireless, line-of-sight, beyond line-of-sight, wideband, ground-based satellite, and encryption transmission devices. Included are multiple waveform systems operating across the spectrum, keying and signal devices, telemetry, and instrumentation systems. Assembles, connects, secures, and interconnects components such as transmitters, power supplies, and antenna assemblies. Resolves installation, repair, and modification problems associated with communications equipment. Employs orbiting communication satellite, line-of-sight, and tropospheric scatter techniques. Conducts tests to restore and maintain systems. Uses layout drawings, schematics, and pictorial diagrams to solve maintenance problems and ensure equipment is properly positioned. Analyzes construction and operating characteristics of equipment to determine source of malfunction. Performs intricate alignment and calibration procedures to ensure maximum operating efficiency. Reviews and ensures compliance with maintenance management publications and procedures. Enforces safety standards for system maintenance activities. Checks installed and repaired components for compliance with technical publications. Maintains inspection and maintenance records. Posts entries on maintenance and inspection records. Records meter readings and other pertinent data in equipment logs. Completes maintenance data collection forms. Requisitions, accounts for, and turns in supplies and material. The designee shall maintain systems are such as CM-200, CM-300, GRC-171 &amp; 211, GRR-23/24, PCAS, GRT- 21/22, PRC-117F/G, RT-1319, TRC-176, URC-200, EPLRS radio, MIDS LVT 2, MIDS LVT 11,AN/TRC-214, Joint Radio Relay (JR2), Cornet TVCS-L, LHSC, RT9000D, 721S-1, 721S-2, ALE, Have Quick, SINCGARS, KY-100, VSAT VRC-103, TTRS, RT-1747, Sun Air RT-9000, Hawkeye Lite, Ranger 1200, iDirect 850/950 Modem, 2050E Modem, but not be limited to those listed in Table 4.5.1. C2 Systems and Associated Equipment; Table 4.5.4 C2 Air Control Squadron O&amp;M Support.</p><p><strong>Desired Candidate Profile</strong></p><p>High School diploma or GED. Formal electronics training such as: military technical training school, vocational college, and/or a four (4) year electronics apprentice program with experience in electronics equipment the technician will maintain. • Minimum IAT Level II, baseline certification IAW AFMAN 17-1303, IP fundamentals, familiarity with deployable communications systems, RF/SATCOM principles highly desired. • Ability to obtain and maintain a US CENTCOM Medical Exam • Must have or be able to obtain/maintain a US Government Secret Security Clearance. NOTE: US Citizenship is required to obtain a Secret Clearance.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are a leading national institution in the field of vocational and technical education and training, working to empower youth and develop their skills in line with labor market needs through modern practical training programs and effective partnerships with public and private sectors and international development partners.</p><p>We adopt the latest training and learning methodologies based on competencies, providing a modern educational and practical environment that focuses on quality, innovation, and continuous improvement.</p><p>We believe that the success of the institution starts with its team, which is why we provide a professional and collaborative work environment that offers our employees real opportunities for learning, development, and professional growth, contributing to making a tangible impact on the future of youth and the labor market in Jordan.</p><p><b>Job Objective</b></p><p>To plan, implement, and develop training programs in the field of HVAC systems based on competency-based training (CBT) methodologies, in line with current and future labor market needs. The HVAC Trainer will be responsible for preparing and training trainees on the installation, diagnosis, maintenance, and repair of heating, ventilation, and air conditioning systems. This includes theoretical knowledge and practical application to ensure the trainees' competency and adherence to safety, quality, and modern industry standards.</p><p><b>Main Responsibilities</b></p><ul><li><b>Curriculum and Training Program Development:</b> Develop study plans and training materials (theoretical and practical) covering various aspects of HVAC systems (residential and commercial).</li><li><b>Theoretical and Practical Training Delivery:</b> Plan and conduct theoretical and practical training sessions using effective training methods, ensuring trainees acquire the knowledge and skills according to the training program outcomes<b>.</b>.</li><li><b>Workshop Management:</b> Maintain the readiness of workshops, equipment, and training tools, ensuring their safe and optimal use.</li><li><b>Troubleshooting:</b> Train participants on using modern measurement and testing devices to detect and troubleshoot faults efficiently.</li><li><b>Occupational Safety and Health:</b> Instill a culture of safety during work and train the team on using personal protective equipment (PPE) and safely handling refrigerants and electricity.</li><li><b>Performance Evaluation:</b> Conduct theoretical and practical assessments to evaluate trainees' competency and provide feedback to ensure their development.</li><li><b>Technology Development Monitoring:</b> Regularly update curricula to include modern technologies such as smart systems, inverter technologies, and building management systems (BMS).</li><li><b>Strengthening Partnerships with the Private Sector:</b> Contribute to building relationships with private sector institutions to support practical training, field visits, employment opportunities, and updating training programs in line with labor market needs.</li></ul><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Required Qualifications and Experience</b></p><ul><li><b>Educational Qualification:</b> Diploma or Bachelor's degree in Mechanical Engineering, HVAC, or equivalent.</li><li><b>Work Experience:</b> Minimum of 3 to 5 years of field experience in the maintenance and installation of HVAC systems, along with prior experience in training or supervision.</li><li><b>Certifications:</b> Preferred to hold relevant professional or training certifications, or certifications in occupational safety and health and handling refrigerants.</li></ul><p><b>Essential Skills</b> </p><ul><li>Verbal and written communication and presentation skills</li><li>Patience and ability to simplify complex concepts</li><li>Presentation and facilitation skills and classroom/workshop management</li><li>Evaluation and constructive feedback skills</li><li>Deep knowledge of refrigeration, electrical, and control circuits</li><li>Professional reading of schematics</li><li>Use of testing, charging, and gas adjustment tools</li><li>Experience with DX, VRF/VRV, Chillers, AHUs systems</li></ul><p><br></p></div>

<p>Aerostat Operators provide Operations and Sustainment (O&amp;S) support for the Persistent Surveillance Systems Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs. Position will require 6-week training TDY to Elizabeth City, South Carolina.</p><p>Essential Responsibilities:</p><ul><li>Aerostat Operators/User-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</li><li>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, And Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), Sensor Payload(s), communications and navigation systems as well as associated support equipment (Boom Lift, Forklift, All Terrain Vehicles (ATV's), and Electrical Power Generators).</li><li>Candidate will perform User-level maintenance functions include performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads.</li><li>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent is required.</li><li>Two-year Associate s degree in a technical field from an accredited college can substitute for work experience.</li><li>Must have an active Secret US Government Clearance. Note: US Citizenship is required to obtain a Secret Clearance.</li><li>Must have a valid U.S. passport with a minimum of one year remaining.</li><li>Must have valid US Driver's license.</li><li>Knowledge of and experience in the operations of hardware systems and components.</li><li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li><li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li><li>At least one (1) year previous Aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li><ul><li>1) Electrical Maintenance Mechanic</li><ul><li>Possess at least two (2) year s aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li><li>Two years of hands-on experience in performing operations and maintenance tasks either on an AEROSTAT system or a related industry/military equivalent is required.</li><li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li><li>Ability to read electronic schematics.</li><li>O&amp;M of electro-mechanical equipment to include one or more of the following:</li><ul><li>Hydraulic/servo valves</li><li>Hydraulic actuators, control systems</li><li>Test and diagnostic equipment</li></ul></ul><li>2) Networking, IT &amp; information systems</li><ul><li>Two years experience is required.</li><li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered.</li><li>CCIE certification with fiber optic certification is preferred.</li></ul><li>3) Mechanical Maintenance</li><ul><li>Mechanical Maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties as a National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li><li>Two years of hands-on experience on an AEROSTAT system or a related industry/military equivalent is required.</li><li>O&amp;M of mechanical equipment to include one or more of the following: Hydraulic systems, Winch systems, Tether/cable handling systems, Industrial generator sets, Power switch gear, HVAC, Cranes Aerial lift , Forklift , Industrial generator sets</li></ul></ul></ul><p>Physical Requirements:</p><ul><li>Requires the ability to regularly lift up to 50 lbs.</li><li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li><li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li><li>Required the ability to regularly kneel repetitive for shift.</li><li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li><li>Requires the ability to stretch/reach on a repetitive basis for shift.</li><li>Requires the ability to walk extensively throughout the plant during shift.</li><li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li></ul><p>Medical Requirements</p><ul><li>Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq.</li><li>Must maintain physical and dental requirements for the duration of the deployment.</li></ul><p>Working and Living Conditions:</p><p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p>

<p><h4>Essential responsibilities</h4> <p>Aerostat operators provide operations and sustainment (O&S) support for the Persistent Surveillance Systems – Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs.</p> <p>Position will require 6-week training TDY to Elizabeth City, South Carolina.</p> <p>Aerostat operators and user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidates will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active Secret US government clearance. Note: US citizenship is required to obtain a Secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience or two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <h4>1) Electrical maintenance mechanic</h4> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>Operations and maintenance of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <h4>2) Networking, IT & information systems</h4> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or Comp T Certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <h4>3) Mechanical maintenance</h4> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>Operations and maintenance of mechanical equipment to include one or more of the following: <ul> <li>Hydraulic systems</li> <li>Winch systems</li> <li>Tether/cable handling systems</li> <li>Industrial generator sets</li> <li>Power switch gear</li> <li>HVAC</li> <li>Cranes, aerial lift, forklift</li> <li>Industrial generator sets</li> </ul> </li> </ul> <h4>Physical requirements</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months.</p> <p>Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods.</p> <p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Operations and Sustainment Support</h4> <p>Aerostat operators provide operations and sustainment (O&S) support for the Persistent Surveillance Systems – Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs.</p> <p>Position will require a 6-week training TDY to Elizabeth City, South Carolina.</p> <h4>Essential Responsibilities</h4> <p>Aerostat operators and user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat-mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems, as well as associated support equipment (boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidates will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under the direction of higher classified technicians and/or site personnel.</p> <h4>Minimum Requirements</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active Secret US Government Clearance. Note: US citizenship is required to obtain a Secret Clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have a valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <h4>1) Electrical Maintenance Mechanic</h4> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools).</li> <li>Ability to read electronic schematics.</li> <li>Operations and maintenance of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <h4>2) Networking, IT & Information Systems</h4> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network+ or CompTIA Certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <h4>3) Mechanical Maintenance</h4> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>Operations and maintenance of mechanical equipment to include one or more of the following: <ul> <li>Hydraulic systems</li> <li>Winch systems</li> <li>Tether/cable handling systems</li> <li>Industrial generator sets</li> <li>Power switch gear</li> <li>HVAC</li> <li>Cranes, aerial lift</li> <li>Forklift</li> <li>Industrial generator sets</li> </ul> </li> </ul> <h4>Physical Requirements</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladders, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend, stoop, and squat repeatedly during shift.</li> <li>Requires the ability to regularly kneel repeatedly during shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis during shift.</li> <li>Requires the ability to stretch and reach repeatedly during shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical Requirements</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment to Iraq.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and Living Conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environments. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months.</p> <p>Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Operations and sustainment support</h4> <p>Aerostat operators provide operations and sustainment (O&S) support for the Persistent Surveillance Systems – Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs.</p> <p>Position will require 6-week training TDY to Elizabeth City, South Carolina.</p> <h4>Essential responsibilities</h4> <p>Aerostat operators and user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat-mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidates will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <h4>1) Electrical maintenance mechanic</h4> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <h4>2) Networking, IT & information systems</h4> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or Comp T certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <h4>3) Mechanical maintenance</h4> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) certified truck mechanic or Federal Aviation Administration (FAA) general mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: <ul> <li>Hydraulic systems</li> <li>Winch systems</li> <li>Tether/cable handling systems</li> <li>Industrial generator sets</li> <li>Power switch gear</li> <li>HVAC</li> <li>Cranes, aerial lift, forklift</li> <li>Industrial generator sets</li> </ul> </li> </ul> <h4>Physical requirements</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required by the employer and customer for deployment to Iraq.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months.</p> <p>Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods.</p> <p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p>The Project Manager Banking ERP will lead the planning, execution, and successful delivery of enterprise resource planning (ERP) initiatives within a banking or financial services environment. The role involves managing large-scale ERP implementations and coordinating cross-functional teams to ensure systems are delivered on time, within scope, and aligned with business and regulatory requirements. Key Requirements 14+ years of experience Proven experience managing large-scale ERP implementation or transformation projects within banking or financial services Strong understanding of ERP systems used in financial institutions Experience overseeing full ERP lifecycle delivery including requirements gathering, system configuration, testing, deployment, and post-go-live support Demonstrated experience managing multi-stakeholder projects across business and technology teams Strong experience in project planning, scheduling, budgeting, and resource management Experience managing system integration with other enterprise platforms Other Qualifications Bachelor s degree in Information Systems, Computer Science, Engineering, Finance, or a related field Strong stakeholder and executive communication skills Ability to manage cross-functional and distributed teams Strong analytical, planning, and problem-solving capabilities Key Responsibilities Lead the end-to-end delivery of ERP implementation projects within the banking or financial services environment Develop detailed project plans, schedules, budgets, and resource plans Coordinate with business stakeholders, IT teams, vendors, and system integrators to ensure smooth project execution Oversee requirements gathering, system configuration, customization, testing, and deployment Manage ERP integrations with core banking systems and other enterprise applications Monitor project progress, track milestones, risks, and issues , and implement mitigation strategies Ensure adherence to banking regulatory, security, and compliance requirements Facilitate user acceptance testing (UAT) and system validation activities Provide regular project status updates and governance reporting to senior leadership Support post-implementation stabilization and continuous improvement initiatives If you would like to know more about the Global Consulting Bootcamp Visit: https://caseinpointco.com/global-consultant-bootcamp/ If you would like to know more about the MC Club Visit: https://menaconsultant.com/mc-club/</p><p><strong>Desired Candidate Profile</strong></p><ul><li>14+ years of experience</li><li>Proven experience managing large-scale ERP implementation or transformation projects within banking or financial services</li><li>Strong understanding of ERP systems used in financial institutions</li><li>Experience overseeing full ERP lifecycle delivery including requirements gathering, system configuration, testing, deployment, and post-go-live support</li><li>Demonstrated experience managing multi-stakeholder projects across business and technology teams</li><li>Strong experience in project planning, scheduling, budgeting, and resource management</li><li>Experience managing system integration with other enterprise platforms</li><li>Bachelor s degree in Information Systems, Computer Science, Engineering, Finance, or a related field</li><li>Strong stakeholder and executive communication skills</li><li>Ability to manage cross-functional and distributed teams</li><li>Strong analytical, planning, and problem-solving capabilities</li></ul>

EPP III, Generator (3 - 150KW) and HVAC Technician KFAB Jordan Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kW EPP III generators. MEANINGFUL WORK AND PERSONAL IMPACT As a Generator and HVAC Mechanic, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel. Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles. Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS). Operate a Load bank during testing Fabricate wire harnesses and solder terminals. Some work will be in a generator shop environment, and some work will be in a field environment. Other duties as assigned. WHAT YOU LL NEED TO SUCCEED Bring your Generator and HVAC expertise along with a drive for innovation to GDIT. The Generator and HVAC Mechanic must have: Education: High School diploma Experience: BA/BS plus 2 years experience, AA/AS/plus 4 years experience, or a High School diploma and 7 years experience Technical skills: Extensive diesel generator experience. Knowledge of generator parallel systems and switch gear. Experience with brazing copper tubing and evacuating and recharging refrigerant. Security Clearance: Able to obtain and maintain a Secret Clearance. Travel to Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq Role requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA). Ability to pass medical/CRC to deploy. Skills Generator Repair HVAC Repair/Troubleshooting Generator Troubleshooting Power Generation Certifications Section 608 Technician Certification EPA is a plus GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do. Growth: AI-powered career tool that identifies career steps and learning opportunities. Support: An internal mobility team focused on helping you achieve your career goals. Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay. Community: Award-winning culture of innovation and a military-friendly workplace. OWN YOUR OPPORTUNITY Explore a career in program management at GDIT and you ll find endless opportunities to grow alongside colleagues who share your passion for the mission and delivering results. #GDITPriority #CECOMWFS #DefenseOCONUS

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span><strong>Role Summary</strong></span></span></p><br><p><span><span>The Accounts Payable Intern will support APCO's North America finance function from APCO's office in Amman, Jordan. The intern will assist with day-to-day accounts payable activities, invoice processing, payment documentation, vendor support, and finance administration while gaining hands-on exposure to accounting operations within a global organization. This role will report to the Accounts Payable Lead in Amman and will work closely with finance colleagues supporting APCO's North America offices. The candidate must be based in Amman, Jordan and available to work on-site from 3:00 PM to 11:00 PM Jordan local time.</span></span></p><br><p><span><span><strong>Job Responsibilities</strong></span></span></p><br><ul><li><p><span><span>Support the review, coding, and processing of supplier invoices in a timely and accurate manner.</span></span></p><br></li><li><p><span><span>Assist with maintaining accounts payable records, invoice files, payment confirmations, and supporting documentation.</span></span></p><br></li><li><p><span><span>Help verify invoices, expense-related documentation, and vendor information in line with internal procedures.</span></span></p><br></li><li><p><span><span>Support vendor account reconciliations and follow up on outstanding items as required.</span></span></p><br></li><li><p><span><span>Assist with monitoring accounts payable mailboxes and responding to routine inquiries under the guidance of the Accounts Payable Lead.</span></span></p><br></li><li><p><span><span>Support the preparation of payment documentation and related finance trackers.</span></span></p><br></li><li><p><span><span>Assist with data entry and updates within APCO’s accounting and finance systems.</span></span></p><br></li><li><p><span><span>Help identify discrepancies and escalate issues to the Accounts Payable Lead when needed.</span></span></p><br></li><li><p><span><span>Support month-end closing activities, reporting requirements, and accounts payable follow-ups.</span></span></p><br></li><li><p><span><span>Participate in finance process improvement initiatives and ad hoc assignments as requested.</span></span></p><br></li></ul><p><span><span><strong>Requirements</strong></span></span></p><br><ul><li><p><span><span>Bachelor's degree in accounting, Finance, Business Administration, or a related field.&nbsp;</span></span></p><br></li><li><p><span><span>Previous internship experience in finance or accounting is a plus.</span></span></p><br></li><li><p><span><span>Strong attention to detail and accuracy.</span></span></p><br></li><li><p><span><span>Good organizational and time management skills.</span></span></p><br></li><li><p><span><span>Proficiency in Microsoft Excel and other Microsoft Office applications.</span></span></p><br></li><li><p><span><span>Strong verbal and written communication skills in English.</span></span></p><br></li><li><p><span><span>Proactive, reliable, and eager to learn.</span></span></p><br></li><li><p><span><span>Ability to work collaboratively with local and international teams.</span></span></p><br></li></ul><p><span><span><strong>Careers at APCO</strong></span></span></p><br><p><span><span>Through our recruitment, hiring and retention efforts, APCO is committed to building teams to bring the best possible expertise and robust perspectives to our clients. We embrace differences in experience, viewpoint and ideas, starting with our values and extending to our behaviors, policies and practices. We aim to create a positive work experience and welcoming environment where everyone feels they belong and can thrive.</span></span></p><br><br><p><span><span><b>About APCO</b></span></span></p><br> <p><span>APCO is a global advisory and advocacy firm helping leading corporations, foundations and governments navigate a complex world and create lasting impact.&nbsp;</span></p><br><br> <p><span>Founded in 1984,&nbsp;</span><span>with one woman’s vision and bold action, APCO has grown into an independent, majority women-owned firm of more than 1,200 employees with work spanning 80 markets around the world.</span></p><br><br> <p><span><span>Headquartered in Washington, D.C., APCO is&nbsp;</span><span>comprised</span><span>&nbsp;of strategic advisers,&nbsp;</span><span>consultants</span><span>&nbsp;and creators, working together across borders and functions, to provide services and&nbsp;</span><span>expertise</span><span>&nbsp;on financial, competitive,&nbsp;</span><span>political</span><span>&nbsp;and societal issues.&nbsp;</span></span></p><br><br> <p><span><span>APCO is a trusted partner to bold purpose-led leaders, lawmakers, government officials, NGOs, the media and other stakeholders in the&nbsp;</span><span>health, energy, technology, transportation &amp;&nbsp;</span><span>infrastructure</span><span>&nbsp;and food &amp; consumer products sectors. For 40 years, the firm has provided public affairs, crisis &amp; reputation, impact, corporate&nbsp;</span><span>reputation</span><span>&nbsp;and global solutions services.&nbsp;</span></span></p><br><br> <p><span>APCO is&nbsp;</span><span><span>renowned for its ability to champion clients’ interests and permission to&nbsp;</span><span>operate</span><span>, build their reputation and strengthen their standing.&nbsp;</span></span><span>APCO’s integrated approach and team of tenacious and empathic talent create connections and winning strategies that accelerate progress and deepen impact.</span></p><br><br> <p><span>By bringing diverse people and ideas together, and working beyond traditional boundaries, APCO builds the un/common ground upon which progress is made.</span></p><br><br> </div>

<p><br></p><p><b>About the Role</b></p><p>We are looking for a highly motivated and passionate candidate to contributes primarily to the back-end development track supporting the design, development, and sustained delivery of server-side services, APIs, data infrastructure, and telecom integration layers that power the division's solutions. Executes assigned development tasks under the technical guidance and direction of the Division Leader, progressively building depth across the division's technology stack while contributing to code quality, testing, and documentation.</p><p>Main Responsibilities, will include but will not be limited to:</p><ul><li>Study business and sales requirements and subsequently develop them into back-end solutions, as well as test and integrate them with current systems, contributing to the optimization of implemented systems</li><li>Monitor the performance of servers and applications and ensure the day-to-day smooth running of systems, supporting proper utilization in line with the function's requirements and overall business objectives.</li><li>Develop technical solutions, platforms, and changes based on business or technical needs</li><li>Develop programs and integration back-ends for Business Support Systems and Customer Care Applications and touchpoints, including FTTH Contractors, Corporate SMS, CMS back-ends, CMS adapters, HR Solutions, Commission Engines, CDRs back-ends, and similar systems.</li><li>Work alongside front-end and mobile developers within the division to implement the back-ends and APIs needed for the delivered solutions, aligning on contracts and integration points.</li><li>Use a variety of programming languages and technologies to build robust back-end platforms and user-facing solutions, including Java, Java Spring Boot, PHP, MongoDB, MySQL, Oracle DB, REST APIs, Web Services, and microservices.</li><li>Support implementation across multiple platforms and legacy software applications, contributing to migrations and integration efforts as assigned.</li><li>Participate in code reviews as both author and reviewer, applying feedback constructively and learning from the process to strengthen technical depth.</li><li>Contribute to the division's CI/CD practices, building and maintaining pipeline components and using DevOps tooling in use at Zain (Azure DevOps, Docker, Kubernetes, Elasticsearch &amp; Kibana, Prometheus &amp; Grafana).</li></ul><p><strong>Desired Candidate Profile</strong></p><p><b>What We Need From You</b></p><p>To be shortlisted for this position, you will need to comply with all of the below requirements:</p><ul><li>Holds a bachelor s degree in Computer Science, Computer Engineering or any related field</li><li>Minimum: 3 years of relevant experience.</li></ul>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements. USAF equivalent position is Munitions/Weapons Technician Apprentice. Essential Responsibilities: Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components. Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction. Assist in management of all inspection, maintenance, and storage of munitions and support equipment. Support quality assurance, compliance, continuity, and standardization of munitions programs. Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems. Maintain weapons certification and currency. Assist with availability and serviceability of munitions to support and meet customer requirements. Perform all other duties as assigned or requested.</p><p><strong>Desired Candidate Profile</strong></p><p>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum. Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required. Completed USAF Munitions/Weapons Tech School or DoD equivalent. Must possess basic knowledge of technical publications related to aircraft maintenance. Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo Must be able to inspect and operate ground support and auxiliary equipment. Must achieve a passing grade in all required courses/certifications for continued employment, as needed. Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment. Must be able to Deploy to Forward Locations (other countries) as Directed by the Government. Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. Must be able to speak, read, write, and understand English. Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance. Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment. Must submit updated SF-86 within 30 days of hire start date. Must have current/active State Issued Driver s License. Must be able to acquire and maintain a valid flight-line Government Driver s License. Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages. Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances. Preferred Qualifications: Associate degree in a relevant career field. RPA Deployment Experience. Prior Experience as a Defense Contractor. Munitions/Weapons experience within the last 10 years .</p>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements. USAF equivalent position is Munitions/Weapons Technician Apprentice. Essential Responsibilities: Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components. Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction. Assist in management of all inspection, maintenance, and storage of munitions and support equipment. Support quality assurance, compliance, continuity, and standardization of munitions programs. Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems. Maintain weapons certification and currency. Assist with availability and serviceability of munitions to support and meet customer requirements. Perform all other duties as assigned or requested.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required.</li><li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li><li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li><li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair, and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance.</p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification, and related activities. Provide technical inputs to managers in matters of weapons management, inventory, maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.</p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Perform basic work in the installation, configuration changes, modification, repair, and adjustment of aircraft armament systems and components.</li> <li>Perform basic maintenance modification, destruction, and demilitarization on ammunition and explosive components.</li> <li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li> <li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li> <li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li> <li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li> <li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li> <li>Maintain weapons certification and currency.</li> <li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li> <li>Perform all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft munitions/weapons maintenance experience required.</li> <li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li> <li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry, and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Munitions/weapons experience within the last 10 years.</li> </ul></p><p></p>

<p>The consultant will conduct a comprehensive technical assessment to evaluate the interoperability and integration of UNRWA's upcoming Electronic Medical Record (EMR) system with Jordan's national health information ecosystem. The assignment includes reviewing UNRWA's existing digital health architecture, analyzing national health information systems and interoperability capabilities, assessing applicable international digital health standards, and providing technical inputs on legal and regulatory considerations related to data governance and information sharing. The consultant will identify technical, operational, institutional, and cybersecurity risks, propose appropriate mitigation measures, and develop a costed implementation roadmap aligned with UNRWA's EMR implementation phases. The work will be carried out using a combination of document reviews, technical analyses, stakeholder consultations, workshops, validation sessions, and comparative assessments of international best practices, while engaging relevant external stakeholders in an exploratory and non-committal manner to inform evidence-based recommendations.</p><p>Specific Outputs/Tasks include but not limited to:</p><p>4.1 System Landscape Assessment</p><ul><li>Review UNRWA s current digital health system architecture, workflows, and reporting mechanisms.</li><li>Analyze the proposed design of the upcoming EMR system funded by KfW.</li><li>Document current reporting requirements to national health authorities.</li></ul><p>4.2 Host Country HIS/HMIS Analysis</p><ul><li>Assess the national health information ecosystem in Jordan.</li><li>Identify systems used by relevant stakeholders, including, but not limited to, the Ministry of Health.</li><li>Document:</li><ul><li>System architecture</li><li>Data standards</li><li>APIs and interoperability capabilities</li><li>Reporting requirements</li><li>Data governance structures</li></ul><li>Jordan Ministry of Health</li><li>National HMIS operators</li><li>Digital health governance entities.</li></ul><p>4.3 Interoperability and Standards Review</p><ul><li>The consultant will evaluate:</li><ul><li>International digital health interoperability standards (e.g. HL7, FHIR, ICD classifications).</li><li>Data exchange mechanisms.</li><li>Health information architecture compatibility.</li><li>Patient identity management considerations.</li><li>Data quality and validation requirements.</li></ul></ul><p>4.4 Legal and Regulatory Assessment</p><ul><li>The consultant will provide technical inputs and coordinate with the legal department, and will not independently determine legal, regulatory, or compliance positions.</li><li>The items to be reviewed are:</li><ul><li>UNRWA internal regulations on data governance and confidentiality.</li><li>Data protection requirements.</li><li>Institutional agreements required for system integration.</li><li>Feasible and compliant data sharing models will be determined by the legal department, informed by the technical inputs provided by the technical consultant.</li></ul></ul><p>4.5 Risk and Feasibility Analysis</p><ul><li>The consultant will identify:</li><ul><li>Technical risks</li><li>System incompatibility</li><li>Infrastructure limitations</li><li>Cybersecurity concerns</li><li>Operational risks</li><li>Workforce readiness</li><li>Data management capacity</li><li>Workflow disruptions</li><li>Institutional risks</li><li>Governance alignment</li><li>Stakeholder coordination</li></ul><li>Mitigation strategies will be proposed for each risk category.</li></ul><p>4.6 Costed Implementation Roadmap</p><ul><li>The consultant will prepare a practical integration roadmap including:</li><ul><li>Recommended interoperability model</li><li>Phased implementation plan</li><li>Resource requirements</li><li>Institutional coordination mechanisms</li><li>Budget estimates</li><li>Timeline and milestones</li></ul><li>The roadmap should align with UNRWA s EMR implementation phases.</li></ul><p>Methodology</p><p>The consultant is expected to apply a mixed methodology including:</p><ul><li>Desk review of documentation</li><li>Technical architecture analysis</li><li>Stakeholder consultations</li><li>Workshops with UNRWA and government partners</li><li>Comparative analysis of international best practices</li><li><br></li></ul><p><strong>Desired Candidate Profile</strong></p><h2>Qualifications/special skills</h2>Masters' Degree in Health Informatics, Public Health, Information Systems, Digital Health, Health Policy, Business Administration, Management, International Development or another related discipline. Minimum seven (10) years of relevant professional experience. Nature of required experience: Experience in digital health systems or health information systems Extent of required relevant experience: Demonstrated experience in EMR implementation or interoperability projects. Experience working with government health systems or international organizations. Demonstrated experience working with Jordanian health systems, including key national platforms such as Hakeem (national EHR), the Jordan Center for Disease Control (JCDC), and the Ministry of Health HMIS, with a proven ability to collaborate effectively with legal departments on data governance and compliance requirements. Experience conducting technical feasibility studies. Knowledge of health data standards and interoperability frameworks. Desirable: Experience in the Middle East region. Experience working with UN agencies or donor-funded projects. Languages English and Arabic are the working languages of UNRWA. For this assignment, fluency in both Arabic and English are required.

<p><h4>Job summary</h4> <p>Leads and manages all day-to-day activities related to the sales function with a focus on building long-term, value-based customer relationships that enable achievement of property sales objectives. Achieves personal booking goals and makes recommendations on booking goals of direct reports.</p> <h4>Candidate profile</h4> <p><strong>Education and experience</strong></p> <ul> <li>2-year degree from an accredited university in Business Administration, Marketing, Hotel and Restaurant Management, or related major; 3 years experience in the sales and marketing or related professional area. OR</li> <li>4-year bachelor's degree in Business Administration, Marketing, Hotel and Restaurant Management, or related major; 1 year experience in the sales and marketing or related professional area.</li> </ul> <h4>Core work activities</h4> <p><strong>Supporting developing & executing sales strategies</strong></p> <ul> <li>Works with sales leader to ensure understanding of sales strategy and effective implementation of this strategy for the segment.</li> <li>Works with management team to create and implement a sales plan addressing revenue, customers and the market for the segment led by the DOS.</li> <li>Assists with the development and implementation of promotions, both internal and external.</li> </ul> <p><strong>Maximizing revenue</strong></p> <ul> <li>Provides positive and aggressive leadership to ensure maximum revenue potential (e.g., sets example with personal booking goals).</li> <li>Recommends booking goals for sales team members.</li> </ul> <p><strong>Managing sales activities</strong></p> <ul> <li>Monitors all day to day activities of direct reports.</li> <li>Approves space release for catering to maximize revenue (DOS, Group) in the absence of a Business Evaluation Manager.</li> <li>Participates in sales calls with members of sales team to acquire new business and/or close on business.</li> <li>Executes and supports the operational aspects of business booked (e.g., generating proposal, writing contract, customer correspondence).</li> </ul> <p><strong>Analyzing & reporting on sales and financial data</strong></p> <ul> <li>Analyzes market information by using sales systems and implements strategy to achieve property’s financial room and catering goals.</li> <li>Assists Revenue Management with completing accurate six period projections.</li> <li>Reviews sales and catering guest satisfaction results to identify areas of improvement.</li> </ul> <p><strong>Ensuring exceptional customer service</strong></p> <ul> <li>Displays leadership in guest hospitality, exemplifies customer service and creates a positive example for guest relations.</li> <li>Interacts with guests to obtain feedback on product quality and service levels.</li> <li>Meets with guests during pre- and post-convention meetings to obtain feedback on quality of product (e.g., rooms, meeting facilities and equipment, food and beverage), service levels, execution against contract and overall satisfaction.</li> <li>Empowers employees to provide excellent customer service.</li> <li>Observes service behaviors of employees and provides feedback to individuals.</li> <li>Incorporates guest satisfaction as a component of department meetings with a focus on continuous improvement.</li> <li>Executes and supports the company’s Customer Service Standards and property’s Brand Standards.</li> <li>Participates in and practices daily service basics of the brand.</li> <li>Executes exemplary customer service to drive customer satisfaction and loyalty by assisting the customer and ensuring their satisfaction before and during their program/event.</li> <li>Serves the customer by understanding their needs and recommending the appropriate features and services that best meet their needs and exceed their expectations, while building a relationship and loyalty to the company.</li> <li>Gains understanding of the property’s primary target customer and service expectations; serves the customer by understanding their business, business issues and concerns, to offer better business solution both prior to, and during the program/event.</li> </ul> <p><strong>Building successful relationships</strong></p> <ul> <li>Develops and manages relationships with key stakeholders, both internal and external.</li> <li>Works collaboratively with off-property sales channels (e.g., Event Booking Center, Market Sales, GSO) to ensure the property needs are being achieved and the sales efforts are complementary, not duplicative.</li> <li>Works with Human Resources, Engineering and Loss Prevention to ensure compliance with local, state and federal regulations and/or union requirements.</li> <li>Attends customer events, trade shows and sales missions to maintain, build or develop key relationships with GSO Managers and customers.</li> </ul> <p><strong>Managing and conducting human resource activities</strong></p> <ul> <li>Interviews and hires management and hourly employees with the appropriate skills to meet the business needs of the operation.</li> <li>Utilizes all available on the job training tools for employees.</li> </ul> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p> <p>JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J. Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW</p><p></p>