Financial Analyst Jobs in Jordan
650 Jobs Found
Amentum
Jordan - Amman
<p><h4>Job Description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p>
<p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p>
<p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p>
<p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p>
<p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p>
<p>USAF equivalent position is Aircraft Mechanic Apprentice.</p>
<h4>Essential Responsibilities:</h4>
<ul>
<li>Performs all daily launch/recovery duties in support of operational requirements.</li>
<li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work with little-to-no supervision.</li>
<li>Performs all other duties as assigned as requested.</li>
</ul>
<h4>Minimum Requirements</h4>
<ul>
<li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li>
<li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active state issued driver’s license.</li>
<li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred Qualifications</h4>
<ul>
<li>Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an airframe and powerplant mechanic.</li>
<li>RPA deployment experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>Aircraft mechanic experience within the last 10 years.</li>
<li>MQ-9 experience as an aircraft mechanic.</li>
<li>MQ-9 aircraft composite repair/replacement experience.</li>
</ul></p><p></p>
Amentum
Jordan - Amman
<p><h4>Job Description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p>
<p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p>
<p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p>
<p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p>
<p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p>
<p>USAF equivalent position is Aircraft Mechanic Apprentice.</p>
<h4>Essential Responsibilities:</h4>
<ul>
<li>Performs all daily launch/recovery duties in support of operational requirements.</li>
<li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work with little-to-no supervision.</li>
<li>Performs all other duties as assigned as requested.</li>
</ul>
<h4>Minimum Requirements</h4>
<ul>
<li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li>
<li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active state issued driver’s license.</li>
<li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred Qualifications</h4>
<ul>
<li>Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an airframe and powerplant mechanic.</li>
<li>RPA deployment experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>Aircraft mechanic experience within the last 10 years.</li>
<li>MQ-9 experience as an aircraft mechanic.</li>
<li>MQ-9 aircraft composite repair/replacement experience.</li>
</ul></p><p></p>
Amentum
Jordan - Amman
<p><h4>Job description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p>
<p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p>
<p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p>
<p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, A&P flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p>
<p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p>
<p>USAF equivalent position is Aircraft Mechanic Apprentice.</p>
<h4>Essential responsibilities:</h4>
<ul>
<li>Performs all daily launch/recovery duties in support of operational requirements.</li>
<li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneuhydraulic, fuel, electrical/electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work with little-to-no supervision.</li>
<li>Performs all other duties as assigned or requested.</li>
</ul>
<h4>Minimum requirements:</h4>
<ul>
<li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li>
<li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must submit updated SF-86 within 30 days of hire start date.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active state issued driver’s license.</li>
<li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred qualifications:</h4>
<ul>
<li>Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an airframe and powerplant mechanic.</li>
<li>RPA deployment experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>Aircraft mechanic experience within the last 10 years.</li>
<li>MQ-9 experience as an aircraft mechanic.</li>
<li>MQ-9 aircraft composite repair/replacement experience.</li>
</ul></p><p></p>
Amentum
Jordan - Amman
<p><h4>Job description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p>
<p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p>
<p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p>
<p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p>
<p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p>
<p>USAF equivalent position is Aircraft Mechanic Journeyman.</p>
<h4>Essential responsibilities:</h4>
<ul>
<li>Performs all daily launch/recovery duties in support of operational requirements.</li>
<li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash /cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work without supervision.</li>
<li>Provides technical and directional leadership guidance to lower-level Aircraft Mechanics.</li>
<li>Provides training to lower-level Aircraft Mechanics.</li>
<li>Performs all other duties as assigned as requested.</li>
</ul>
<h4>Minimum requirements:</h4>
<ul>
<li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of three years of actual aircraft mechanic maintenance experience required.</li>
<li>Minimum of one year experience on MQ-9 aircraft, as an aircraft mechanic.</li>
<li>Must have comprehensive knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess comprehensive knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a comprehensive understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must submit updated SF-86 within 30 days of hire start date.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active state issued driver’s license.</li>
<li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred qualifications:</h4>
<ul>
<li>Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li>
<li>Aircraft mechanic experience within the last 10 years.</li>
<li>RPA deployment experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>MQ-9 aircraft composite repair / replacement experience.</li>
</ul>
<h4>Compensation details:</h4>
<p>36.26</p>
<p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p>
<h4>Benefits overview:</h4>
<p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p>
<ul>
<li>Health, dental, and vision insurance</li>
<li>Paid time off and holidays</li>
<li>Retirement benefits (including 401(k) matching)</li>
<li>Educational reimbursement</li>
<li>Parental leave</li>
<li>Employee stock purchase plan</li>
<li>Tax-saving options</li>
<li>Disability and life insurance</li>
<li>Pet insurance</li>
</ul>
<p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p>
<h4>Additional information</h4>
<p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>
Amentum
Jordan - Amman
<p><h4>Job description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p>
<p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p>
<p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p>
<p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p>
<p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p>
<p>USAF equivalent position is Aircraft Mechanic Apprentice.</p>
<h4>Essential responsibilities:</h4>
<ul>
<li>Performs all daily launch/recovery duties in support of operational requirements.</li>
<li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work with little-to-no supervision.</li>
<li>Performs all other duties as assigned as requested.</li>
</ul>
<h4>Minimum requirements:</h4>
<ul>
<li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li>
<li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must submit updated SF-86 within 30 days of hire start date.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active state issued driver’s license.</li>
<li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred qualifications:</h4>
<ul>
<li>Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an airframe and powerplant mechanic.</li>
<li>RPA deployment experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>Aircraft mechanic experience within the last 10 years.</li>
<li>MQ-9 experience as an aircraft mechanic.</li>
<li>MQ-9 aircraft composite repair / replacement experience.</li>
</ul>
<h4>Compensation details:</h4>
<p>34.17</p>
<p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p>
<h4>Benefits overview:</h4>
<p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p>
<ul>
<li>Health, dental, and vision insurance</li>
<li>Paid time off and holidays</li>
<li>Retirement benefits (including 401(k) matching)</li>
<li>Educational reimbursement</li>
<li>Parental leave</li>
<li>Employee stock purchase plan</li>
<li>Tax-saving options</li>
<li>Disability and life insurance</li>
<li>Pet insurance</li>
</ul>
<p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p>
<h4>Additional information</h4>
<p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>
Médecins Sans Frontières
Jordan - Amman
<h2><strong> RECRUITMENT NOTICE</strong></h2>
<h2><strong> INTERNAL & EXTERNAL</strong></h2>
<p >The French section of Médecins Sans Frontières is recruiting for its project in <strong>Amman</strong></p>
<p><strong><u>Multitask Technician - Daily Worker Pool</u></strong></p>
<p> </p>
<p><strong>CONTEXT</strong><br>
Médecins Sans Frontières is a private, non-profit international humanitarian organization dedicated to providing medical assistance to populations in crisis, without discrimination and regardless of race, religion, creed, or political affiliation. <strong>For more information, visit our Arabic website</strong>, <a href="http://www.msf-me.org/">www.msf-me.org</a><u>.</u></p>
<p>Médecins Sans Frontières is running a reconstructive surgery program in Amman, which opened in 2006, is giving access to reconstructive surgery (orthopedic, plastic, and maxillo-facial) to war-wounded people providing comprehensive health care, MSF aims at identifying and referring patients from neighboring countries (Iraq, Yemen, Syria, and other countries with conflicts) then ensuring their medical follow-up after discharge.</p>
<p>Médecins Sans Frontières Reconstructive Surgery in Amman are seeking a <strong>Multitask Technician for our Daily Worker Pool. </strong></p>
<p><strong>DIMENSION OF POST</strong></p>
<p>Reconstructive Surgery Hospital with an average of 550 admissions per year, over 1000 surgeries annually, 72 surgical beds and 126 rehabilitation beds, 2 OTs for orthopedic, maxillo-facial and plastic reconstructive surgeries, OPD with an average 550 consultations / month, physiotherapy and psychosocial department, and Antimicrobial Resistance activity (Stewardship, IPC and Micro laboratory) within the hospital.</p>
<p><strong>SCOPE OF RESPONSIBILITIES:</strong></p>
<p>Perform repair / maintenance / construction works, according to the supervisor’s instructions and MSF standards, to ensure proper operations and prevent faults / deterioration of MSF equipment / installations / infrastructures. </p>
<p class="MsoListBullet" ><b><span lang="EN-GB" >ACCOUNTABILITIES:</span></b></p>
<p class="MsoListBullet" ><span >•<span > </span></span><span >Carry out all minor work (construction, repairs, etc.) requested by the line manager, as well as any task identified by the employee and approved by the line manager.</span></p>
<p class="MsoListBullet" ><span >•<span > </span></span><span >Perform regular maintenance of MSF installations / equipment / infrastructures (base, house, store, warehouse, health center, hospital, etc.), particularly in line with a preventive maintenance plan (procedures to follow, schedule, etc.).</span></p>
<p class="MsoListBullet" ><span >•<span > </span></span><span >In the event of faults / deterioration, diagnose the problem and propose possible solutions to the line manager and/or technical adviser.</span></p>
<p class="MsoListBullet" ><span >•<span > </span></span><span >Perform any necessary tests / checks to confirm the proper operation of the installation or equipment after repair.</span></p>
<p class="MsoListBullet" ><span >•<span > </span></span><span >Ensure effective management, protection and care of work tools (including site installations under the employee’s supervision) and keep the workshop tidy.</span></p>
<p class="MsoListBullet" ><span >•<span > </span></span><span >Ensure that there are adequate stocks of consumables and materials for minor repairs and manage those stocks; placing orders in time.</span></p>
<p class="MsoListBullet" ><span >•<span > </span></span><span >Keep all documents related to installations / equipment / infrastructures in order and update them regularly.</span></p>
<p class="MsoListBullet" ><span >•<span > </span></span><span >Immediately inform the line manager of any problems that arise in the course of the work, particularly regarding damage, loss, theft or attempted break-ins.</span></p>
<p class="MsoListBullet" ><span >•<span > </span></span><span >Assist logistics department with any related work needed.</span></p>
<p class="MsoListBullet" ><span >•<span > </span></span><span >Availability for emergencies</span></p>
<p class="MsoListBullet" ><span >•<span > </span>Participate actively in meetings and trainings. </span></p>
<p ><strong><u>MSF Section/Context Specific Accountabilities</u></strong></p>
<p ><strong>Scope of Responsibilities</strong></p>
<ul>
<li>Carry out maintenance and small repairs on MSF’s premises and infrastructures (offices , apartments etc.)</li>
<li>Carry out interventions as indicated by the direct supervisor, insourced or outsourced.</li>
<li>Other request related to the maintenance activities such as swage and water pips, etc.</li>
<li>Inform the direct supervisor of any problems or breakdowns noticed in MSF’s premises.</li>
<li>Inform the direct supervisor in the event of an incapacity to carry out the work requested which requires the intervention of a worker or specialized technician.</li>
<li>Help workers or specialized technicians if needed.</li>
<li>When work is planned, have a request for material approved by the direct supervisor then use the approved request form to collect material from the log store .</li>
<li>Carrying out gardening tasks and follow up with watchman , if needed.</li>
<li>Carrying and moving (Load and off load) equipment, furniture, etc, to support Logistics Department and other departments in the mission.</li>
<li>Help in new apartment receiving or hand over by supporting the inspection and reports.</li>
<li>Carry out annual services for tools and equipment in MSF premises (offices and apartments) such as AC , heating boiler system , water dispenser, etc.</li>
<li>Having validated Jordanian driving license as will be autonomous by driving the Pick-Up for his professional displacements.
<p><strong>Equipment</strong></p>
</li>
<li>Carry out inventory of his/her tools and equipment every month and handing it over to his/her direct Supervisor</li>
<li>Use MSF standard Tools to perform his work.</li>
<li>Inform his/her direct supervisor of any losses, thefts or replacement needs.</li>
<li>Use tools and equipment placed at his/her disposition correctly.
<p><strong>Safety and Security</strong></p>
</li>
<li>Be a part of the Building Evacuation Plan team, as evacuator, rescue.. etc, as request of the Logistics supervisor .</li>
<li>Be aware of all security polices and respect it.</li>
<li>Maintain all safety and security equipment such as fire extinguishers, cameras, access doors,..etc, functioning in all times.
<p><strong>HVAC Services</strong></p>
</li>
<li>Install, maintain and repair heating, ventilation, and cooling units. Diagnose and repair of electronic, mechanical and electrical components of these systems.</li>
<li>Be available to work nights or weekends, on a rotating basis, to service emergency needs of our activities</li>
<li>Must be proactive in ensuring that preventative maintenance of all equipment is done promptly to help prevent future problems with equipment. They dismantle equipment as necessary when needed to troubleshoot the system or ensure that the equipment is properly maintained.
<p><strong>Electrical works</strong></p>
</li>
<li>Carry out and update the electrical installations inventory in msf premisses</li>
<li>Elaborate the necessary documentation for carrying out energy installations projects (plans, list of materials, etc.).</li>
<li>Explains safety measures regarding electricity to team.</li>
<li>Performs curative and preventive maintenance on electrical equipment.</li>
<li>Follows up the work of the owner regarding electricity (, low voltage master distribution boards, elevators).
<p><strong>Additionnal activities</strong></p>
</li>
<li>Upon request
<p><strong>Working hours</strong></p>
</li>
<li>Office hours</li>
<li>On-call
<p class="MsoBodyText2" ><span >REQUIRED PROFILE:</span></p>
<table border="1" cellpadding="0" cellspacing="0" class="MsoNormalTable" width="100%">
<tbody>
<tr>
<td valign="top" width="19%">
<p class="MsoNormal" ><b><span lang="EN-GB">Education</span></b></p>
</td>
<td valign="top" width="80%">
<p class="MsoNormal"><span>Literacy essential.</span></p>
</td>
</tr>
<tr>
<td valign="top" width="19%">
<p class="MsoNormal" ><b><span lang="EN-GB">Experience</span></b></p>
</td>
<td valign="top" width="80%">
<p class="MsoNormal"><span>Previous experience desirable</span></p>
</td>
</tr>
<tr>
<td valign="top" width="19%">
<p class="MsoNormal" ><b><span lang="EN-GB">Languages</span></b><span lang="EN-GB"><span> </span></span></p>
</td>
<td valign="top" width="80%">
<p class="MsoNormal"><span>Local language essential. Mission language desirable.</span></p>
</td>
</tr>
<tr>
<td valign="top" width="19%">
<p class="MsoNormal" ><b><span lang="EN-GB">Knowledge</span></b></p>
</td>
<td valign="top" width="80%">
<p class="MsoNormal"><span>Essential ability to do basic repairs</span></p>
</td>
</tr>
<tr>
<td valign="top" width="19%">
<p class="MsoNormal" ><b><span lang="EN-GB">Competencies</span></b></p>
</td>
<td valign="top" width="80%">
<p class="MsoListBullet" ><span lang="EN-GB" ><span>•<span > </span></span></span><span lang="EN-GB" >Commitment to MSF Principles <b>L1</b></span></p>
<p class="MsoListBullet" ><span lang="EN-GB" ><span>•<span > </span></span></span><span lang="EN-GB" >Behavioural Flexibility <b>L1</b></span></p>
<p class="MsoListBullet" ><span lang="EN-GB" ><span>•<span > </span></span></span><span lang="EN-GB" >Stress Management <b>L1</b></span></p>
<p class="MsoListBullet" ><span lang="EN-GB" ><span>•<span > </span></span></span><span lang="EN-GB" >Results and Quality Orientation <b>L1</b></span></p>
<p class="MsoListBullet" ><span lang="EN-GB" ><span>•<span > </span></span></span><span lang="EN-GB" >Teamwork and Cooperation <b>L1</b></span></p>
<p class="MsoListBullet" ><span lang="EN-GB" ><span>•<span > </span></span></span><span lang="EN-GB" >Service Orientation <b>L1</b>- Results</span></p>
</td>
</tr>
</tbody>
</table>
<p ><strong>WORK LOCATION: </strong> Amman, Jordan</p>
<p ><strong>CONTRACT: </strong> In case of current contract with MSF, amendment to the original contract with the same terms and conditions, with modifications on function and salary only.</p>
<p ><strong>STARTING DATE: </strong> October 2026</p>
<p>Interested applicants should submit their application in English containing curriculum vitae, letter of motivation no later than <strong>14<sup>th</sup> September</strong> to the following email:</p>
<p><a href="mailto:msff-amman-recruitment@paris.msf.org">msff-amman-recruitment@paris.msf.org</a></p>
<p><strong>O</strong><strong>nly candidates meeting the requirements will be called for interviews through their email addresses</strong></p>
<p>Notice: No monetary transactions, neither demands of favors in kind, nor other types of favoritism will be tolerated in the recruitment process. MSF reserves the right to refuse hiring of a candidate who has benefitted from such acts. All illicit demands of these types may be pursued through the judicial system.</p>
</li>
</ul>
<p class="MsoListBullet" > </p>
Amentum
Jordan - Amman
<p><h4>Job description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p>
<p>Accounts for all materials and/or support equipment being shipped out of, and received, at the facility. Ensures parts due in from maintenance (DIFM) are properly tracked and takes appropriate actions to meet applicable deadlines. Keeps a running inventory of stock/equipment using appropriate software. Researches and orders parts, materials, and tools for use to ensure maintenance operational capabilities. Ensures the overall serviceability of all support equipment and related items. Keeps track of all assigned government property entering and leaving the facility. Processes paperwork, including filing DD-1149s, for all supply/support activities. Ensures proper allotment of material and/or equipment to appropriate maintenance personnel in support of maintenance operations.</p>
<p>USAF equivalent position is Supply Technician Journeyman.</p>
<h4>Essential responsibilities:</h4>
<ul>
<li>Performs warehousing and support program duties in support of maintenance operations within the site at the comprehensive level.</li>
<li>Assists in verifying materials (or merchandise) against receiving documents, noting, and reporting discrepancies and damages.</li>
<li>Routes materials and parts to prescribed storage locations and/or facilities as needed for operational support.</li>
<li>Stores, stacks, or palletizes materials and/or equipment in accordance with applicable technical guidelines.</li>
<li>Rearranges and takes inventory of stored materials/equipment and documents within assigned database.</li>
<li>Performs the examination of stored materials and reports deterioration and damage; removes material from storage and prepares it for shipment.</li>
<li>May operate hand and/or power trucks and/or equipment in performing warehousing and support duties.</li>
<li>Performs miscellaneous quality assurance duties including CTK inspections, inventory process checks, inspecting and examining materials, article inspections, etc.</li>
<li>Supports supervisor with inventory management of decentralized and decontrolled items, including supplies and equipment in accordance with applicable AFIs.</li>
<li>Supervises, trains, and provides mentorship to subordinate personnel in support/supply functions.</li>
<li>Performs all other duties as assigned or requested.</li>
</ul>
<h4>Minimum requirements:</h4>
<ul>
<li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of three years actual supply/support experience and/or combination of related aircraft maintenance experience required.</li>
<li>Must possess comprehensive knowledge of governing supply and/or support systems/programs, policies, nomenclature, work methods, manuals, or other established guidelines.</li>
<li>Must have the comprehensive analytical ability to define problems, collect necessary data, establish facts, and take recommended actions based upon applicable established guidelines.</li>
<li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li>
<li>Must be familiar with computerized databases, spreadsheets, and computerized inventory management programs.</li>
<li>Must have comprehensive experience with material handling equipment.</li>
<li>Must have good planning and organizational skills.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to work under deadlines.</li>
<li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must submit updated SF-86 within 30 days of hire start date.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must possess a valid U.S. driver’s license and be able to obtain a government driving permit.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred qualifications:</h4>
<ul>
<li>Associate degree in a relevant career field.</li>
<li>RPA operations and deployment experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>Vehicle operator training.</li>
<li>Support/supply experience in the last 10 years.</li>
</ul>
<h4>Compensation details:</h4>
<p>35.18</p>
<p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p>
<h4>Benefits overview:</h4>
<p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p>
<ul>
<li>Health, dental, and vision insurance</li>
<li>Paid time off and holidays</li>
<li>Retirement benefits (including 401(k) matching)</li>
<li>Educational reimbursement</li>
<li>Parental leave</li>
<li>Employee stock purchase plan</li>
<li>Tax-saving options</li>
<li>Disability and life insurance</li>
<li>Pet insurance</li>
</ul>
<p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p>
<h4>Additional information</h4>
<p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>
Marriott Hotels & Resorts
Jordan - Amman
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span><br>POSITION SUMMARY<br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br>PREFERRED QUALIFICATIONS <br>Education: High school diploma or G.E.D equivalent.<br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br>Experience in hotel engineering or maintenance a plus.<br>Supervisory Experience: No supervisory experience. <br>REQUIRED QUALIFICATIONS<br>License or Certification: Driver’s License<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. <br>JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That’s The JW Treatment™. In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</span> </div>
Jordan - Amman
<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Maintains an Aircraft Scheduling and Documentation (ASD) maintenance and utilization program. Helps develops long range plans and establishes production schedules to meet customer requirements. Prepares weekly, monthly, quarterly, and annual utilization schedules for maintenance. Maintains proficiency in operations of the USAF Maintenance Information System including Core Automated Maintenance System (CAMS), Centralized Engine Management System (CEMS), and other maintenance management database library programs. Maintains equipment records in library files. Collects, reviews, and files documented information for planning and scheduling of various maintenance activities. Ensures accurate documentation is maintained for aircraft engines, munitions, missiles, AGE configurations, Time Compliance Technical Orders, time change items, and special inspections. USAF equivalent position is Aircraft Scheduling & Documentation Journeyman. Essential Responsibilities: Prepares the weekly, monthly, quarterly, and annual utilization schedules for maintenance. Assist in the oversight of the TCTO process for completion and proper documentation with IMDS and/or CEMS. Supervises/maintains assigned aircraft/equipment records in database library files within IMDS and/or CEMS. Assists in the collection, review, and filing of documented information for planning and scheduling of RPA maintenance activities. Ensure accurate documentation is maintained for aircraft engines, munitions, missiles, AGE configurations, Time Compliance Technical Orders, time change items, and special inspections. Performs and documents training of lower ASD personnel to ensure mission readiness, as required. Performs all other duties as assigned or requested.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High School Diploma, or have completed relevant military and/or vocational technical school curriculum</li><li>Minimum of three years actual Aircraft Plans & Scheduling experience required</li><li>Must possess comprehensive planning and organizational skills</li><li>Must be able to work under deadlines with minimal supervision</li><li>Must be able to gain/maintain CEMS access for Engine Management purposes</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods</li><li>Must be able to speak, read, write, and understand English</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must submit updated SF-86 within 30 days of hire start date</li><li>Must have current/active U.S. Driver s License</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications:</p><ul><li>Associate Degree in a relevant career field</li><li>Plans and Scheduling experience within the last 10 years</li><li>Minimum of two years experience in operations of the USAF MIS, including CAMS/IMDS</li><li>RPA Operations & Deployment Experience</li><li>Previous Experience as Engine Manager with CEMS experience</li><li>Prior experience as a Defense Contractor</li><li>Previous MQ-9 Plans and Scheduling Experience Desired</li></ul>
Jordan - Amman
<p><h4>Position summary</h4>
<p>Perform minor routine maintenance on property vehicles (i.e., engineering trucks, shuttle vans, electric carts) including checking oil, fluid levels, tire pressure/wear, charging batteries, and replacing spark plugs. Perform preventative maintenance on tools and equipment, including cleaning and lubrication. Maintain proper maintenance inventory and requisition parts and supplies as needed. Maintain daily logs of operation, maintenance, and safety activities, including test results, instrument readings, and details of equipment malfunctions and maintenance work.</p>
<p>Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Speak with others using clear and professional language, prepare and review written documents accurately and completely, and answer telephones using appropriate etiquette.</p>
<p>Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Visually inspect tools, equipment, or machines (e.g., to identify defects). Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by supervisors.</p>
<h4>Preferred qualifications</h4>
<p><strong>Education:</strong> Technical, trade, or vocational school degree.</p>
<p><strong>Related work experience:</strong> At least 2 years of related work experience.</p>
<p><strong>Supervisory experience:</strong> No supervisory experience.</p>
<p><strong>License or certification:</strong> None.</p>
<p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p>
<p>Combining timeless glamour with a vanguard spirit, St. Regis Hotels & Resorts is committed to delivering exquisite experiences at more than 50 luxury hotels and resorts in the best addresses around the world. Beginning with the debut of The St. Regis hotel in New York by John Jacob Astor IV at the dawn of the twentieth century, the brand has remained committed to an uncompromising level of bespoke and anticipatory service for all of its guests, delivered flawlessly by a team of gracious hosts that combine classic sophistication and modern sensibility, as well as our signature Butler Service.</p>
<p>We invite you to explore careers at St. Regis. In joining St. Regis, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>
Marriott Hotels & Resorts
Jordan - Amman
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span><br>POSITION SUMMARY<br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br>PREFERRED QUALIFICATIONS <br>Education: High school diploma or G.E.D equivalent.<br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br>Experience in hotel engineering or maintenance a plus.<br>Supervisory Experience: No supervisory experience. <br>REQUIRED QUALIFICATIONS<br>License or Certification: Driver’s License<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. <br>JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That’s The JW Treatment™. In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</span> </div>
Jordan - Amman
<p><strong> Excellent remote job opportunity: Seeking female marketers and managers for an online marketing team </strong></p><p>To work with and join EcoWay's leading partnership in natural and environmentally friendly products, by joining its digital team to work <strong>remotely (from home)</strong> in the field of digital marketing </p><p>We are looking for ambitious women and leaders for a successful marketing team to market EcoWay's Korean natural products free of chemicals, as well as building and training a successful team </p><ul><li>Marketing EcoWay products across various social media platforms.</li><li>Attract new customers, manage orders, and respond to inquiries.</li><li>Onboard new members to build a marketing team under your supervision.</li><li>Monitor team performance and guide it to achieve sales goals and continuous growth.</li></ul><p><strong>Requirements:</strong></p><ul><li>Having a smartphone or computer with a good internet connection </li><li>Having communication and persuasion skills and the ability to manage time.</li><li>Passion for natural products and digital marketing.</li><li>No prior experience required (we provide comprehensive and free training for everyone).</li></ul><p><strong>Benefits:</strong></p><ul><li><strong>Full flexibility:</strong> Work from anywhere and at times that suit you.</li><li><strong>Rising income system:</strong> lucrative commissions on sales + monthly bonuses upon forming and building the team.</li><li><strong>Training and development:</strong> Free courses in marketing, personal development, and leadership.</li><li><strong>Supportive work environment:</strong> ready-made work plans and marketing tools to ensure your success.</li></ul><p><strong>How to apply:</strong> If you want to increase your income from home, gain financial independence, and build your own team, please contact us to send your details and start training immediately.</p>
Chemonics International Inc
Jordan - Amman
<p dir="LTR" style="margin-left:-4.5pt;"><strong>Training Opportunity in Precision Metal Grinding:</strong> <strong>Aqaba, October 17, 2026</strong></p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Training Program Title: Grinding Technician</strong></p><p dir="LTR" style="margin-left:-4.5pt;">The Water Governance Activity (WGA) project, sponsored by the United States government, will hold a specialized training program in metal grinding. The program aims to develop trainees' skills in the safe and precise use of grinding tools and equipment, equipment maintenance, and executing finishing work in accordance with quality requirements in the industrial sector.</p><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;">The program offers beginners and workers with limited experience the opportunity for practical and theoretical training on selecting appropriate grinding discs, operating tools, performing basic inspections and maintenance, and executing precision grinding while paying attention to details, the effect of heat on metal, and the properties of different materials.</p><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;">The Water Governance Activity project will cover the costs of conducting this program (accommodation and transportation are not included), at the Gulf Engineering Testing Est. (GETE) facilities in Aqaba, starting October 17, 2026, consisting of 42 training hours (7 days).</p><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Program Objective:</strong></p><p dir="LTR" style="margin-left:-4.5pt;">In cooperation with Gulf Engineering Testing Est., the program aims to prepare a grinding technician capable of safely setting up and operating grinding tools, selecting the appropriate disc for the material and the required work, removing excess material and burrs, preparing edges, and finishing surfaces precisely, while controlling heat and maintaining part dimensions and surface quality.</p><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Enrollment Requirements:</strong></p><ul><li dir="LTR">Applicants must be Jordanian citizens.</li><li dir="LTR">Must be at least 18 years old.</li><li dir="LTR">The program is suitable for beginners; those with up to one year of practical experience in grinding, metal workshops, or related industrial work are also eligible.</li><li dir="LTR">Initial knowledge of using hand tools or working in a workshop environment is preferred, but no specialized professional certificate is required.</li><li dir="LTR">Submit proof of practical experience if available.</li><li dir="LTR">Must be in good health and of good conduct.</li><li dir="LTR">Commitment to occupational safety requirements and technical instructions.</li></ul><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Program Content:</strong></p><ul><li dir="LTR">Basics of occupational safety in grinding work, and risks of sparks, noise, dust, flying particles, and disc breakage.</li><li dir="LTR">Identifying types of grinding tools and discs and their uses, inspecting equipment before operation, and performing basic maintenance and cleaning.</li><li dir="LTR">Practical training on precision grinding, removing excess material and burrs, preparing edges, and finishing surfaces while maintaining dimensions.</li><li dir="LTR">Understanding the effect of heat on metal during grinding, choosing the appropriate work method for material properties, and applying quality and safety requirements.</li></ul><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Program Stages:</strong></p><ul><li dir="LTR">Review and evaluation of applications and resumes.</li><li dir="LTR">Conducting an initial assessment to determine applicants' levels and the suitability of the training program for them, through personal interviews or a simple practical test if necessary.</li><li dir="LTR">Implementation of practical and theoretical training by instructors who are specialists in grinding and metal machining.</li><li dir="LTR">Conducting a practical assessment to measure the trainee's ability to select the appropriate tool and disc, operate equipment safely, and execute grinding and finishing work accurately.</li><li dir="LTR">Awarding a certificate of completion to trainees who meet attendance requirements and pass the final assessment.</li></ul><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Program Location and Duration:</strong></p><ul><li dir="LTR">Location: Aqaba Governorate, at the facilities of Gulf Engineering Testing Est.</li><li dir="LTR">Program Start Date: October 17, 2026.</li><li dir="LTR">Program Duration: 42 training hours (7 days).</li></ul><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Required Documents:</strong></p><p dir="LTR" style="margin-left:-4.5pt;">Please attach the following documents when filling out the application form:</p><ul><li dir="LTR">Resume (CV)</li><li dir="LTR">Copy of a valid national ID</li><li dir="LTR">Certificate of educational qualification (if available)</li><li dir="LTR">Accreditation and/or professional practice certificates (if available)</li><li dir="LTR">Experience certificates (if available)</li><li dir="LTR">A recently issued non-criminal record certificate</li></ul><p dir="LTR" style="margin-left:-4.5pt;"> </p><p style="margin-left:.25in;"><strong>Application Steps</strong></p><p dir="LTR">Those wishing to apply for the program must adhere to the following <strong>three steps in order</strong>:</p><ol><li dir="LTR"><strong>Step One – Apply via Akhtaboot</strong></li></ol><p dir="LTR"><strong>Please apply for the training opportunity through the Akhtaboot platform and attach your resume (CV) with the job application.</strong></p><ol><li dir="LTR" value="2"><strong>Step Two – Fill out the Training Application Form</strong></li></ol><p dir="LTR">After applying via Akhtaboot, please fill out the <strong>Electronic Training Application Form</strong> through the following link:</p><p dir="LTR" style="margin-left:-4.5pt;"><a href="https://ncpmu-skills.com/opportunities/16?lang=ar">https://ncpmu-skills.com/opportunities/16?lang=ar</a></p><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Please note that the deadline for receiving applications is Thursday, October 8, 2026.</strong></p><p dir="LTR" style="margin-left:-4.5pt;"> </p>
Confidential
Jordan - Amman
<p>Company overview and the job</p><p>Majorca Beauty Center is a comprehensive destination for beauty care, aiming to provide all the services a woman needs in one place, making it easier for her to take care of herself and enjoy her day off without having to move between several centers. We strive to ensure every client enjoys a comprehensive experience that combines comfort and relaxation, so we offer several services that meet the diverse needs of women, including (hair, nails, makeup, skin, laser services, permanent makeup, spa, massage). We are committed to delivering our services using the latest devices and technologies, alongside high-quality global products to guarantee the best results according to the highest standards of quality and safety. Our experience is not limited to providing cosmetic services; we also aim to provide an upscale, comfortable environment, exceptional service, and professional consultations tailored to each client's personality and lifestyle.</p><p> Majorca Center's mission is to enhance our clients' confidence and help them look their best for all occasions through integrated services delivered with the highest levels of professionalism and care.</p><p>Qualifications and requirements</p><ul><li>4 to 7 years of practical experience in a high-quality hair salon or hair care.</li><li>Proven, tangible professional academy in modern cutting, coloring, and styling techniques.</li><li>Proficiency in using styling and coloring tools and chemicals, with adherence to safety standards.</li><li>Ability to interact with clients with courtesy and high understanding, and a strong artistic sense for appearance and coordination.</li><li>Flexibility and the ability to work in a team and in variable hours according to the store schedule.</li></ul><p>Required skills</p><ul><li>Awareness of the latest hair styling trends and cutting, coloring, and modern hairstyles.</li><li>Strong communication skills and the ability to understand clients' needs and translate them into tangible results.</li><li>Ability to creativity and innovation in providing customized styling solutions.</li><li>High level of precision and attention to detail in work and quality of results.</li><li>Time management and ability to handle work pressure during peak hours.</li></ul><p>Benefits and perks</p><ul><li>Competitive salary with performance-based incentives and customer satisfaction bonuses.</li><li>Professional work environment and opportunity for career development and ongoing training in the brand's product range.</li><li>Annual leave and social security registration.</li><li>Discounts and benefits for personal care and company services.</li></ul>
UrbaCon Contracting & Trading Company
Jordan - Amman
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span><u><b>Job Summary</b></u>
<br></span><p>The Senior Financial Analyst is responsible in the development and maintenance of planning and budgeting/forecasting; analysis and interpretation of trends, recommended actions. Maximizes return on financial assets by establishing financial policies, procedures, controls, and reporting systems. This position also monitors all work related to year end closing procedures to issue the yearly audited financial statement of the Company and reviews all accrued expenses on a monthly basis.</p><br>
<br><br><u><b>Job Responsibilities 1</b></u>
<br><p>Conduct in-depth financial analysis, including financial modeling, variance analysis, and forecasting, to support strategic decision-making Provide insights and recommendations to senior management based on their analysis of financial data, market trends, and industry benchmarks.</p><br>
<p>Develop and maintain financial models and tools to assess business performance, evaluate investment opportunities, and forecast financial outcomes.</p><br>
<p>Conduct financial reviews and audits to ensure accuracy, completeness, and compliance with accounting standards and regulatory requirements.</p><br>
<p>Collaborate with cross-functional teams, including finance, operations, and sales, to gather data, assess performance, and develop actionable insights.</p><br>
<p>Present financial analysis findings and recommendations to senior management, board members, and stakeholders in a clear and concise manner.</p><br>
<p>Support budgeting and forecasting processes by providing financial expertise, analyzing trends, and identifying opportunities for cost savings and revenue enhancement.</p><br>
<p>Assist in the preparation of financial reports, presentations, and communications for internal and external stakeholders.</p><br>
<p>Provide training and mentorship to junior financial analysts, sharing knowledge and best practices to support their professional development.</p><br>
<p>Stay current on industry trends, financial regulations, and best practices in financial analysis to continually improve analytical methodologies and drive business success.</p><br> <br><br><u><b>Job Responsibilities 2</b></u>
<br><br><b>Additional Responsibilities 3</b>
<br><br><u><b>Job Knowledge & Skills</b></u>
<br><p> Advanced knowledge of financial analysis techniques, including financial modeling, ratio analysis, and valuation methods.</p><br>
<p>Strong quantitative skills are essential for interpreting complex financial data, performing scenario analysis, and drawing meaningful insights from financial reports.</p><br>
<p>Proficiency in financial software and tools, such as Excel, financial modeling software, and data visualization tools, enables effective analysis and presentation of financial information.</p><br>
<p>Excellent communication and presentation skills are vital for effectively communicating financial analysis findings and recommendations to stakeholders at all levels of the organization.</p><br>
<p>Experience in budgeting, forecasting, and financial reporting enhances the Senior Financial Analyst's ability to provide accurate and timely financial insights to support decision-making processes.</p><br>
<p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u>
<br><p>Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u>
<br>Resilience<br>Quality_321977507<br>Leadership_321977503<br>Corporate Financing L3<br>Investment Planning L3<br>Financial Control L3<br>CFA Chartered Financial Analyst L3<br>CIMA Certified Investment Management Analyst L3<br>Agility<br>Build High-Performing Teams<br>AI Fluency<br>Provide Direction<br><br><br><u><b>Education</b></u>
<br>Bachelor's Degree in Accounting<br>Profesional degree in Certified Public Accountant (CPA)<br><br><br><br>
</div>
Jordan - Amman
<p><h4>Job description</h4>
<p>Diesel truck technician performs all types of repairs and diagnostics. This includes daily hands-on support and training.</p>
<p>3 to 5 years minimum full-time experience. Ford training a plus.</p>
<p>Paid online training and classroom, lifting up to 70 lbs, must have own tools.</p>
<p>New vehicle inspections including factory warranty repairs and computer diagnostics and programming.</p>
<p>Earn top wages, match your vacation, and enjoy the security of a premium benefits package.</p>
<p>We offer medical insurance, 401K, paid uniforms.</p>
<p>Lots of fleet work. Family owned since 1955.</p></p><p></p>
Jordan - Amman
<p><h4>Job description</h4>
<p>Diesel truck technician performs all types of repairs and diagnostics. This includes daily hands-on support and training.</p>
<p>3 to 5 years minimum full-time experience. Ford training a plus.</p>
<p>Paid online training and classroom, lifting up to 70 lbs, must have own tools.</p>
<p>New vehicle inspections including factory warranty repairs and computer diagnostics and programming.</p>
<p>Earn top wages, match your vacation, and enjoy the security of a premium benefits package.</p>
<p>We offer medical insurance, 401K, paid uniforms.</p>
<p>Lots of fleet work. Family owned since 1955.</p></p><p></p>
Jordan - Amman
<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will coordinate and supervise the work effort of assigned subordinate maintenance personnel in support of the unit s daily RPA maintenance operations. Member will perform and inspect organizational and intermediate level electronic maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.USAF equivalent position is Avionics Technician Journeyman. Essential Responsibilities:</p><ul><li>Applies comprehensive technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities.</li><li>Requires a comprehensive understanding of the interrelationships of circuits and associated systems.</li><li>Exercises independent judgment and leadership in performing assigned tasks in conjunction with designated direction from Production Staff, Avionics Technician Leads, or Avionics/Com Technician III s.</li><li>Uses common and complex test instruments in the performance of assigned duties.</li><li>Provides technical and directional leadership guidance to lower-level Avionics Technicians.</li><li>Provides training to lower-level Avionics Technicians.</li><li>Maintains, repairs, and installs various types of electronic equipment and related devices.</li><li>Applies technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations.</li><li>Must be able to work without direct supervision.</li><li>Performs all other duties as assigned and requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Must have High School Diploma, or have completed relevant military and/or vocational technical school curriculum</p><p>Minimum of three years of actual Aircraft Avionics and/or GCS maintenance experience required</p><p>Minimum of one-year actual experience on MQ-9 Aircraft/GCS, as an Avionics Technician</p><p>Must have comprehensive knowledge of basic and complex electronics maintenance and repair</p><p>Must have comprehensive knowledge of RFF systems, components, and accessories</p><p>Must possess comprehensive knowledge of technical publications related to aircraft electronics maintenance</p><p>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles</p><p>Must be capable of using and reading blueprints, wiring diagrams, and data tables</p><p>Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or after the second deployment</p><p>Must be able to inspect and operate ground support and auxiliary equipment</p><p>Must achieve a passing grade in all required courses/certifications for continued employment, as needed</p><p>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment</p><p>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government</p><p>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods</p><p>Must be able to speak, read, write, and understand English</p><p>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</p><p>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</p><p>Must submit updated SF-86 within 30 days of hire start date</p><p>Must have current/active State Issued Driver s License</p><p>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages</p><p>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</p><p>Preferred Qualifications:</p><ul><li>Current IAT Level II Certification</li><li>RPA Deployment Experience</li><li>Prior Experience as a Defense Contractor</li><li>Avionics Technician Experience within the last 10 years</li></ul>
Jordan - Amman
<p><h4>Job Description</h4>
<p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will coordinate and supervise the work effort of assigned subordinate maintenance personnel in support of the unit’s daily RPA maintenance operations. Member will perform and inspect organizational and intermediate level electronic maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p>
<p>USAF equivalent position is Avionics Technician Journeyman.</p>
<h4>Essential Responsibilities:</h4>
<ul>
<li>Applies comprehensive technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities.</li>
<li>Requires a comprehensive understanding of the interrelationships of circuits and associated systems.</li>
<li>Exercises independent judgment and leadership in performing assigned tasks in conjunction with designated direction from Production Staff, Avionics Technician Leads, or Avionics/Com Technician III’s.</li>
<li>Uses common and complex test instruments in the performance of assigned duties.</li>
<li>Provides technical and directional leadership guidance to lower-level Avionics Technicians.</li>
<li>Provides training to lower-level Avionics Technicians.</li>
<li>Maintains, repairs, and installs various types of electronic equipment and related devices.</li>
<li>Applies technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations.</li>
<li>Must be able to work without direct supervision.</li>
<li>Performs all other duties as assigned and requested.</li>
</ul>
<h4>Minimum Requirements</h4>
<ul>
<li>Must have high school diploma, or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of three years of actual aircraft avionics and/or GCS maintenance experience required.</li>
<li>Minimum of one-year actual experience on MQ-9 aircraft/GCS, as an Avionics Technician.</li>
<li>Must have comprehensive knowledge of basic and complex electronics maintenance and repair.</li>
<li>Must have comprehensive knowledge of RFF systems, components, and accessories.</li>
<li>Must possess comprehensive knowledge of technical publications related to aircraft electronics maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.</li>
<li>Must be capable of using and reading blueprints, wiring diagrams, and data tables.</li>
<li>Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or after the second deployment.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to deploy to forward locations (other countries) as directed by the government.</li>
<li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must submit updated SF-86 within 30 days of hire start date.</li>
<li>Must have current/active state issued driver’s license.</li>
<li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
<h4>Preferred Qualifications</h4>
<ul>
<li>Current IAT Level II Certification.</li>
<li>RPA Deployment Experience.</li>
<li>Prior experience as a defense contractor.</li>
<li>Avionics Technician experience within the last 10 years.</li>
</ul></p><p></p>
Amentum
Jordan - Amman
<p>The designee shall be qualified to install, sustain, troubleshoot, and repair standard ground radar and airfield systems and equipment platforms to include air traffic control radars and, ground aircraft control and warning radar systems; air traffic control radios; meteorological and navigational aid systems. Resolves installation, repair, and modification problems associated with ATCALS and C2 equipment. Employs line-of-sight and tropospheric scatter techniques. Conducts tests to restore and maintain systems. Uses layout drawings, schematics, and pictorial diagrams to solve maintenance problems and ensure equipment is properly positioned. Analyzes construction and operating characteristics of equipment to determine source of malfunction. Performs intricate alignment and calibration procedures to ensure maximum operating efficiency. Reviews and ensures compliance with maintenance management publications and procedures. Enforces safety standards for system maintenance activities. Checks installed and repaired components for compliance with technical publications. Maintains inspection and maintenance records. Posts entries on maintenance and inspection records. Records meter readings and other pertinent data in equipment logs. Completes maintenance data collection forms. Requisitions, accounts for, and turns in supplies and material. The designee shall maintain systems such as DME, ILS, MMLS, MPN-23, UPS, RCSU-2238, TACAN, TRN-44, VOR, RSI/RCI or equivalent monitoring equipment, FMQ-19, FMQ-23, Micro-EARTS, Multi Source Correlator Tracker (MSCT), NRTD, STARS, STRAP, TDX-2000, MARK IVB, NEXION, Terminal Advisory System (TAS), GPN-27(or 20), MPN-25, TPS-75, UPX-27, UPX-37, UPX-44A, CM-200, CM-300, GRC-171 & 211, GRR-23/24, PCAS, GRT-21/22, ETVS, Liberty Star, PL-2000DT, PRC-117, RT-1319, TRC-214, TRC-176, URC-200, ATIS, DVRS, TTRS, but not be limited to those listed in Table 4.5.2 ATCALS Systems and Associated Support Equipment; Table 4.5.3 ATC Weather Systems and Associated Support Equipment; Table 4.5.5 Regional Maintenance Center O&M and Support Equipment.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High School diploma or GED.</li><li>Relevant Associate's degree preferred.</li><li>Formal electronics training such as: military technical training school, vocational college, and/or a four (4) year electronics apprentice program with experience in electronics equipment the technician will maintain.</li><li>Maintaining COMSEC/IP networking equipment requires IAT Level II baseline certification IAW AFMAN 17-1303.</li><li>Level I tech four (4) years of recent, relevant, and practical experience with equipment the technician will maintain and oversee.</li><li>Shall have four (4) years experience working with/on electronic systems.</li><li>Ability to obtain and maintain a US CENTCOM Medical Exam</li><li>Must have or be able to obtain/maintain a US Government Secret Security Clearance.</li><li>NOTE: US Citizenship is required to obtain a Secret Clearance.</li></ul>