Vocational Professional Jobs in Jordan
8 Jobs Found
Save and set alert for similar positionsManage alerts
<p>Electrical and project engineer, handling site visits to housing developments and projects </p>
<p dir="LTR" style="margin-left:-4.5pt;"><strong>Training Opportunity in Essential Skills for Assistant Welders: </strong><strong>Aqaba, October 17, 2026</strong></p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Training Program Name: Assistant Welder</strong></p><p dir="LTR" style="margin-left:-4.5pt;">The Water Governance Activity (WGA) project, sponsored by the United States government, will hold a specialized training program to prepare assistant welders, aiming to develop the essential skills required for safe and organized work in welding workshops/industrial projects, and to enhance the trainees' readiness to join entry-level job opportunities in the industrial sector.</p><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;">The program provides beginners without prior experience the opportunity for practical and theoretical training on the basics of safety in welding work, familiarization with welding tools and equipment, and executing preparation, cleaning, and material handling tasks according to the supervisor's instructions and occupational safety procedures.</p><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;">The Water Governance Activity project will cover the costs incurred by conducting this program (accommodation and transportation are not included), at the Gulf Engineering Testing Est. (GETE) facilities in Aqaba, on October 17, 2026, with a duration of 42 training hours (7 days).</p><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Program Objective:</strong></p><p dir="LTR" style="margin-left:-4.5pt;">The program, in cooperation with the Gulf Engineering Testing Est., aims to prepare an assistant welder capable of supporting welding work efficiently and safely, by preparing the work area and materials, cleaning surfaces and edges, transporting and organizing materials and equipment, learning about basic tools, and assisting the welder under direct supervision while adhering to quality and occupational safety requirements.</p><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Enrollment Requirements:</strong></p><ul><li dir="LTR">Applicant must be a Jordanian national.</li><li dir="LTR">Age must be at least 18 years.</li><li dir="LTR">Basic knowledge of welding and metal work.</li><li dir="LTR">No prior experience in welding or metal workshops is required.</li><li dir="LTR">Willingness to learn and perform practical work within a workshop environment under a trainer's supervision.</li><li dir="LTR">Ability to fully commit to training hours and technical instructions.</li><li dir="LTR">Must be in good health and of good conduct.</li><li dir="LTR">Commitment to occupational safety requirements and technical instructions.</li></ul><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Program Content:</strong></p><ul><li dir="LTR">Fundamentals of occupational safety in welding workshops/industrial projects, and the risks of sparks, heat, smoke, gases, and electricity.</li><li dir="LTR">Introduction to basic welding tools and equipment, personal protective equipment (PPE), and safe inspection methods before use.</li><li dir="LTR">Preparing materials and surfaces before welding, including cleaning, rust and paint removal, edge preparation, and organizing workpieces.</li><li dir="LTR">Handling, transporting, and arranging materials and equipment safely, assisting the welder during work, and organizing and cleaning the work site after completion.</li></ul><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Program Stages:</strong></p><ul><li dir="LTR">Review and evaluation of applications and CVs.</li><li dir="LTR">Conducting an initial assessment to determine the readiness of applicants and the suitability of the training program for them, through personal interviews or a simple practical test if necessary.</li><li dir="LTR">Implementation of practical and theoretical training by specialized trainers in welding and occupational safety.</li><li dir="LTR">Implementation of a practical assessment to measure the trainee's ability to prepare materials and the work site, use protective equipment, and handle tools and materials safely.</li><li dir="LTR">Granting a completion certificate to trainees who meet attendance requirements and pass the final evaluation.</li></ul><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Program Location and Duration:</strong></p><ul><li dir="LTR">Location: Aqaba Governorate, at the Gulf Engineering Testing Est. (GETE) facilities.</li><li dir="LTR">Date: October 17, 2026.</li><li dir="LTR">Duration: 42 training hours (7 days).</li></ul><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Required Documents:</strong></p><p dir="LTR" style="margin-left:-4.5pt;">Please attach the following documents when filling out the application form:</p><ul><li dir="LTR">Curriculum Vitae (CV)</li><li dir="LTR">Copy of a valid national ID</li><li dir="LTR">Academic qualification certificate (if any)</li><li dir="LTR">Accreditation and/or professional practice certificates (if any)</li><li dir="LTR">Experience certificates (if any)</li><li dir="LTR">A recently issued non-criminal record certificate</li></ul><p style="margin-left:.25in;"><strong><span dir="LTR">Application Steps</span></strong></p><p dir="LTR">Those wishing to apply for the program must adhere to the <strong>following three steps in order</strong>:</p><ol><li dir="LTR"><strong>Step One – Applying via Akhtaboot</strong></li></ol><p dir="LTR"><strong>Please apply for the training opportunity through the Akhtaboot platform and attach your CV with the job application.</strong></p><ol><li dir="LTR" value="2"><strong>Step Two – Filling out the Training Application Form</strong></li></ol><p dir="LTR">After applying via Akhtaboot, please fill out the <strong>Electronic Training Application Form</strong> through the following link:</p><p dir="LTR" style="margin-left:-4.5pt;"><a href="https://ncpmu-skills.com/opportunities/14?lang=ar">https://ncpmu-skills.com/opportunities/14?lang=ar</a></p><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Please note that the deadline for receiving applications is Thursday, October 8, 2026.</strong></p><p dir="LTR" style="margin-left:-4.5pt;"> </p>
<p dir="LTR" style="margin-left:-4.5pt;"><strong>Opportunity to Obtain an Internationally Accredited Welding Certification: Aqaba, November 8 – 12, 2026</strong></p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Training Program Title: Water Pipe Welding (GMAW 5G)</strong></p><p dir="LTR" style="margin-left:-4.5pt;">The Water Governance Activity (WGA) project, sponsored by the U.S. government, will conduct a specialized pipe welding training program to elevate the welding profession and equip pipe welders with internationally accredited qualifications to align with market and industrial sector requirements in Jordan.</p><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;">The program offers qualified workers the opportunity to train and sit for an examination to obtain a certified welding qualification compliant with the <strong>American Welding Society (AWS)</strong> standards, according to ASME IX / API 1104 specifications for GMAW welding in the 5G position.</p><p dir="LTR" style="margin-left:-4.5pt;">Training- Announcement</p><p dir="LTR" style="margin-left:-4.5pt;">The Water Governance Activity project will cover the costs associated with conducting this program (accommodation and transportation are not included) at the Gulf Engineering Testing Establishment (GETE) facilities in Aqaba during the period of November 8 – 12, 2026, for 6 hours daily.</p><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Program Objective:</strong></p><p dir="LTR" style="margin-left:-4.5pt;">In cooperation with the Gulf Engineering Testing Establishment, which has extensive experience in training and certifying welding technicians according to ASME IX / API 1104 specifications and testing them via AWS-certified inspectors, the program aims to qualify and develop the efficiency of pipe welders using the Gas Metal Arc Welding (GMAW) (MIG/MAG) method, where the pipe axis is fixed horizontally in the 5G position without rotating the pipe. Welding is performed around the circumference of the joint across flat, vertical, and overhead segments to raise technical proficiency and qualify welders according to American standards.</p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Eligibility Criteria:</strong></p><ul><li dir="LTR">Applicant must be of Jordanian nationality.</li><li dir="LTR">Must be at least 18 years old.</li><li dir="LTR">Must possess proven practical experience of no less than two years in pipe welding in the industrial sector, specifically in Gas Metal Arc Welding (GMAW) (MIG/MAG), with a preference for the ability to weld pipes in a fixed position.</li><li dir="LTR">Must hold a pipe welding qualification certificate according to ASME Section IX/API 1104, or hold a professional license (at least at a skilled pipe welder level).</li><li dir="LTR">Provide proof of practical experience through certified experience certificates.</li><li dir="LTR">Must be in good health and of good conduct.</li><li dir="LTR">Commitment to occupational safety requirements and technical instructions.</li></ul><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Program Content:</strong></p><ul><li dir="LTR">Developing pipe welding skills using the Gas Metal Arc Welding (GMAW) (MIG/MAG) method.</li><li dir="LTR">Practical training on the (5G) position, where welding is performed on pipes with a fixed horizontal axis to simulate actual working conditions in industrial projects.</li><li dir="LTR">Reviewing quality requirements and inspection procedures according to ASME Section IX/API 1104 standards.</li><li dir="LTR">Practical assessment to measure technical proficiency according to standard requirements.</li></ul><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Program Stages:</strong></p><ul><li dir="LTR">Review and evaluation of applications and CVs.</li><li dir="LTR">Conducting a professional assessment to determine applicant levels and the suitability of the training program (via personal interviews if necessary).</li><li dir="LTR">Implementation of practical and theoretical training by specialized instructors.</li><li dir="LTR">Conducting certification tests according to the requirements of the American standards ASME IX/API 1104.</li><li dir="LTR">Awarding certification to those who pass the exam.</li></ul><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Program Location and Duration:</strong></p><ul><li dir="LTR">Location: Aqaba Governorate, at the Gulf Engineering Testing Establishment (GETE) facilities.</li><li dir="LTR">Date: November 8, 2026.</li><li dir="LTR">Duration: 5 days of training, 6 hours per day.</li></ul><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Required Documents:</strong></p><p dir="LTR" style="margin-left:-4.5pt;">Please attach the following documents when filling out the application form:</p><ul><li dir="LTR">Curriculum Vitae (CV)</li><li dir="LTR">Copy of a valid personal identification card</li><li dir="LTR">Educational qualification certificate (if any)</li><li dir="LTR">Accreditation and/or professional practice certificates</li><li dir="LTR">Experience certificates</li><li dir="LTR">A recently issued non-criminal record certificate</li></ul><p style="margin-left:.25in;"><strong>Application Steps</strong></p><p dir="LTR">Those wishing to apply for the program are kindly requested to adhere to the <strong>following three steps in order:</strong></p><ol><li dir="LTR"><strong>Step One – Apply via Akhtaboot</strong></li></ol><p dir="LTR"><strong>Please apply for the training opportunity through the Akhtaboot platform and attach your CV to the application.</strong></p><p dir="LTR"> </p><ol><li dir="LTR" value="2"><strong>Step Two – Fill out the Training Application Form</strong></li></ol><p dir="LTR">After applying via Akhtaboot, please fill out the <strong>online training application form</strong> through the following link:</p><p style="margin-left:-4.5pt;"><a href="https://ncpmu-skills.com/opportunities/17?lang=ar">https://ncpmu-skills.com/opportunities/17?lang=en</a></p><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Please note that the deadline for receiving applications is Monday, November 2, 2026.</strong></p>
<p style="margin-left:-4.5pt;"><strong>Opportunity to obtain an internationally accredited welding certification: Aqaba, 22 – 26 November 2026</strong></p><p style="margin-left:-4.5pt;"><strong>Training Program Title: Pipe Welding ( FCAW 5G )</strong></p><p style="margin-left:-4.5pt;">The Water Governance Activity (WGA), sponsored by the United States government, will conduct a specialized pipe welding training program to upgrade the welding profession, equip pipe welders with internationally recognized qualifications, and align them with the requirements of the market and industrial sector in Jordan.</p><p style="margin-left:-4.5pt;"> </p><p style="margin-left:-4.5pt;">The program provides qualified workers the opportunity to train and sit for an examination to obtain a certified welding certificate, compliant with the <strong>American Welding Society (AWS)</strong> according to <strong>American standards ASME IX /API 1104</strong> in FCAW welding in the 5G position.</p><p style="margin-left:-4.5pt;"> </p><p style="margin-left:-4.5pt;">The Water Governance Activity will cover the costs associated with conducting this program (accommodation and transportation are not included) at the Gulf Engineering Tests & Examiantion (GETE) facilities in Aqaba from 22 – 26 November 2026, for 6 hours daily.</p><p style="margin-left:-4.5pt;"> </p><p style="margin-left:-4.5pt;"><strong>Program Goal:</strong></p><p style="margin-left:-4.5pt;">In cooperation with the Gulf Engineering Tests & Examination (GETE) company, which has experience in training and qualifying welding technicians according to the American standards ASME IX /API 1104 and evaluating them by GETE inspectors certified by the American Welding Society (AWS), the program aims to qualify and develop the efficiency of pipe welding using the Flux-Cored Arc Welding (FCAW) method, where the pipe axis is horizontal and fixed in a 5G position without rotating the pipe. The welding is performed around the circumference of the joint across flat, vertical, and overhead sections, with the goal of raising technical competence and qualifying welding professionals according to American standards.</p><p style="margin-left:-4.5pt;"><strong>Enrollment Conditions:</strong></p><ul><li>The applicant must be of Jordanian nationality.</li><li>Must be at least 18 years old.</li><li>Must possess documented practical experience of at least two years in pipe welding in the industrial sector, specifically in Flux-Cored Arc Welding (FCAW), with a preference for the ability to weld pipes in a fixed position.</li><li>Must hold a pipe welding qualification certificate according to ASME Section IX/API 1104, or hold a professional practice license (as a skilled pipe welder at a minimum).</li><li>Provide proof of practical experience through certified experience certificates.</li><li>Must be in good health and of good conduct.</li><li>Commitment to occupational safety requirements and technical instructions.</li></ul><p style="margin-left:-4.5pt;"> </p><p style="margin-left:-4.5pt;"><strong>Program Content:</strong></p><ul><li>Developing pipe welding skills using the Flux-Cored Arc Welding (FCAW) method.</li><li>Practical training on the (5G) position, where welding is done on pipes with a fixed horizontal axis to simulate actual working conditions in industrial projects.</li><li>Review of quality requirements and inspection procedures according to ASME Section IX/API 1104 standards.</li><li>Practical evaluation to measure technical competence according to the standard's requirements.</li></ul><p style="margin-left:-4.5pt;"> </p><p style="margin-left:-4.5pt;"><strong>Program Stages:</strong></p><ul><li>Review and evaluation of applications and CVs.</li><li>Conducting a professional assessment to determine the applicants' levels and the suitability of the training program (through personal interviews if necessary).</li><li>Implementation of practical and theoretical training by specialized trainers.</li><li>Conducting certification tests according to the requirements of the American standards ASME IX/API 1104.</li><li>Granting certification to those who pass the exam.</li></ul><p style="margin-left:-4.5pt;"> </p><p style="margin-left:-4.5pt;"><strong>Program Location and Duration:</strong></p><ul><li>Location: Aqaba Governorate at the Gulf Engineering Tests & Examination (GETE) facilities.</li><li>Program Start Date: September 20, 2026.</li><li>Duration: 5 days of training, 6 hours per day.</li></ul><p style="margin-left:-4.5pt;"> </p><p style="margin-left:-4.5pt;"><strong>Required Documents:</strong></p><p style="margin-left:-4.5pt;">Please attach the following documents when filling out the application form:</p><ul><li>Curriculum Vitae (CV)</li><li>Copy of a valid national ID</li><li>Educational qualification certificate (if available)</li><li>Certification and/or professional practice licenses</li><li>Experience certificates</li><li>A recently issued non-criminal record certificate</li></ul><p style="margin-left:.25in;"><strong>Application Steps</strong></p><p>Applicants wishing to apply for the program must adhere to the <strong>following three steps in order:</strong></p><ol><li><strong>Step One – Apply via Akhtaboot</strong></li></ol><p><strong>Please apply for the training opportunity through the Akhtaboot platform and attach your CV within the application for the advertisement.</strong></p><p> </p><ol><li value="2"><strong>Step Two – Fill out the Training Application Form</strong></li></ol><p>After applying via Akhtaboot, please fill out the <strong>Electronic Training Application Form</strong> through the following link:</p><p style="margin-left:-4.5pt;"><a href="https://ncpmu-skills.com/o/19?lang=ar">https://ncpmu-skills.com/o/19?lang=ar</a></p><p style="margin-left:-4.5pt;"> </p><p style="margin-left:-4.5pt;"><strong>Please note that the final deadline for receiving applications is Thursday, November 8, 2026.</strong></p><p style="margin-left:-4.5pt;"> </p>
<p dir="LTR" style="margin-left:-4.5pt;"><strong>Opportunity to Obtain an Internationally Accredited Welding Certification: Aqaba, October 4 – 8, 2026</strong></p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Training Program Name: </strong><strong>Pipe Welding </strong><strong>( TIG GTAW 6GR ) </strong></p><p dir="LTR" style="margin-left:-4.5pt;">The Water Governance Activity (WGA) project, sponsored by the United States government, will conduct a specialized pipe welding training program to upgrade the welding profession and equip pipe welders with internationally accredited qualifications in alignment with the requirements of the market and the industrial sector in Jordan.</p><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;">The program provides qualified workers with the opportunity to train and take the test to obtain a welding certificate accredited and compliant with the <strong>American Welding Society (AWS)</strong> <strong>according to American standards</strong> ASME IX /API 1104 in GTAW welding at the 6GR position.</p><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;">The Water Governance Activity project will cover the costs associated with conducting this program (accommodation and transportation are not included) at the Gulf Engineering Tests & Examiantion (GETE) facilities in Aqaba during the period of October 4 – 8, 2026, for 6 hours daily.</p><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Program Objective:</strong></p><p dir="LTR" style="margin-left:-4.5pt;">In cooperation with the Gulf Engineering Tests & Examination (GETE) company, which has experience in training and qualifying welding technicians according to the American standards ASME IX /API 1104, and testing them by GETE examiners accredited by the American Welding Society (AWS), the program aims to qualify and develop the efficiency of pipe welding using the GTAW method (Gas Tungsten Arc Welding - Argon) at the 6GR position, where pipe welding is performed at a 45-degree angle with a restriction ring at the welding area, in order to enhance technical efficiency and qualify welders according to American standards.</p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Admission Requirements:</strong></p><ul><li dir="LTR">Applicant must be of Jordanian nationality.</li><li dir="LTR">Age must be at least 18 years old.</li><li dir="LTR">Must possess proven practical experience of at least two years in pipe welding in the industrial sector, specifically in Gas Tungsten Arc Welding (GTAW), and preference is given to the ability to weld pipes in a fixed position.</li><li dir="LTR">Must hold a qualification certificate in pipe welding according to ASME Section IX/API 1104, or hold a professional practice license (pipe welder at the skilled level at least).</li><li dir="LTR">Provide proof of practical experience through accredited experience certificates.</li><li dir="LTR">Must be in good health and have good conduct.</li><li dir="LTR">Commitment to occupational safety requirements and technical instructions.</li></ul><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Program Content:</strong></p><ul><li dir="LTR">Developing pipe welding skills using the GTAW (Gas Tungsten Arc Welding) method.</li><li dir="LTR">Practical training on the 6GR position, where welding is performed at a 45-degree angle with a restriction ring that simulates actual working conditions in industrial projects.</li><li dir="LTR">Reviewing quality requirements and inspection procedures according to ASME Section IX/API 1104 standards.</li><li dir="LTR">Practical evaluation to measure technical efficiency according to the requirements of the standard.</li></ul><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Program Phases:</strong></p><ul><li dir="LTR">Review and evaluation of applications and CVs.</li><li dir="LTR">Conducting a professional assessment to determine the applicants' levels and the suitability of the training program (through personal interviews if necessary).</li><li dir="LTR">Implementation of practical and theoretical training by specialized instructors.</li><li dir="LTR">Conducting certification tests according to the requirements of the American standards ASME IX/API 1104.</li><li dir="LTR">Awarding certificates of accreditation to those who pass the exam.</li></ul><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Program Location and Duration:</strong></p><ul><li dir="LTR">The location is in Aqaba Governorate at the facilities of Gulf Engineering Tests & Examination (GETE).</li><li dir="LTR">The program starts on October 4, 2026.</li><li dir="LTR">The program duration is 5 days of training, 6 hours per day.</li></ul><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Required Documents:</strong></p><p dir="LTR" style="margin-left:-4.5pt;">Please attach the following documents when filling out the application form:</p><ul><li dir="LTR">CV</li><li dir="LTR">Copy of a valid national ID card</li><li dir="LTR">Certificate of academic qualification (if any)</li><li dir="LTR">Accreditation certificates and/or professional practice licenses</li><li dir="LTR">Experience certificates</li><li dir="LTR">A recently issued certificate of good conduct</li></ul><p style="margin-left:.25in;"><strong>Application Steps</strong></p><p dir="LTR">Applicants interested in the program are requested to adhere to the following <strong>three steps in order</strong>:</p><ol><li dir="LTR"><strong>Step One – Apply via Akhtaboot</strong></li></ol><p dir="LTR"><strong>Please apply for the training opportunity through the Akhtaboot platform and attach your CV with the application for the advertisement.</strong></p><p dir="LTR"> </p><ol><li dir="LTR" value="2"><strong>Step Two – Fill out the training application form</strong></li></ol><p dir="LTR">After applying via Akhtaboot, please fill out the <strong>electronic training application form</strong> through the following link:</p><p><a href="https://ncpmu-skills.com/opportunities/9?lang=ar">https://ncpmu-skills.com/opportunities/9?lang=ar</a></p><p dir="LTR" style="margin-left:-4.5pt;"> </p><p dir="LTR" style="margin-left:-4.5pt;"><strong>Please note that the deadline for receiving applications is Wednesday, September 23, 2026.</strong></p><p dir="LTR" style="margin-left:-4.5pt;"> </p>
</span></i></b></span></span></p> <p align="center" dir="LTR" style="text-align: center; line-height: 150%; direction: ltr; unicode-bidi: embed;"><b><span style="font-size: 16pt; line-height: 150%; color: black; background: white;">An industrial company specializing in wood and metal industries in Amman wishes to hire:</span></b><b><span dir="LTR" style="font-size: 16pt; line-height: 150%; color: black; background: white;"></span></b></p> <p align="center" dir="LTR" style="text-align: center; line-height: 150%; direction: ltr; unicode-bidi: embed;"><b><span style="font-size: 16pt; line-height: 150%; color: black; background: white;">Forklift Operator</span></b><span dir="LTR" style="font-size: 16pt; line-height: 150%; color: black; background: white;"></span></p> <p align="center" dir="LTR" style="text-align: center; line-height: 150%; direction: ltr; unicode-bidi: embed;"><span style="font-size: 16pt; line-height: 150%; color: black; background: white;">(Must hold a construction license)<span dir="LTR" style="font-size: 16pt; line-height: 150%; color: black; background: white;"></span></span></p> <p align="center" dir="LTR" style="text-align: center; line-height: 150%; direction: ltr; unicode-bidi: embed;"><b><span style="font-size: 16pt; line-height: 150%; color: black;">Carpenters</span></b><b><span style="font-size: 16pt; line-height: 150%;"> and Carpenter Assistants</span></b><span dir="LTR" style="font-size: 16pt; line-height: 150%; color: black;"></span></p> <p align="center" dir="LTR" style="text-align: center; line-height: 150%; direction: ltr; unicode-bidi: embed;"><span style="font-size: 16pt; line-height: 150%; color: black;">(With previous experience)<span dir="LTR" style="font-size: 16pt; line-height: 150%; color: black;"></span></span></p> <p align="center" dir="LTR" style="text-align: center; line-height: 150%; direction: ltr; unicode-bidi: embed;"><b><span style="font-size: 16pt; line-height: 150%;">Quality Technician with experience in blacksmithing and welding</span></b><b><span dir="LTR" style="font-size: 16pt; line-height: 150%;"></span></b></p> <p align="center" dir="LTR" style="margin: 0cm; text-align: center; line-height: 150%;"><span style="font-size: 16pt; line-height: 150%; font-family: 'Times New Roman', serif; color: black; background: white;">Good conduct and behavior, resident of East Amman or Madaba - Transportation is provided (Raghadan / East Amman / Madaba)<span dir="LTR" style="font-size: 16pt; line-height: 150%; font-family: 'Times New Roman', serif; color: black; background: white;"></span></span></p> <p align="center" dir="LTR" style="text-align: center; line-height: 150%; direction: ltr; unicode-bidi: embed;"><span style="font-size: 16pt; line-height: 150%; color: black; background: white;">Social security / provided transportation / overtime according to work requirements / working hours are from Saturday to Thursday from 7:30 to 4:00 PM<span dir="LTR" style="font-size: 16pt; line-height: 150%; color: black; background: white;"></span></span></p> <p align="center" dir="LTR" style="margin-bottom: 12pt; text-align: center; line-height: 150%; direction: ltr; unicode-bidi: embed;"><span style="font-size: 16pt; line-height: 150%; color: black; background: white;">Please call 0799120979 or come to the factory located in Al-Yadouda area, Madaba street, 200 meters after Al-Yadouda Zoo<span dir="LTR" style="font-size: 16pt; line-height: 150%; background: white;"></span></span></p>
<p>Bachelor s degree in Civil Engineering.</p><p>Good command of AutoCAD and Microsoft Office.</p><p>Strong communication, organization, and teamwork skills.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>
</span></i></b></span></span></p>
<p align="center" dir="RTL" style="text-align: center; line-height: 150%; direction: rtl; unicode-bidi: embed;"><b><span style="font-size: 16pt; line-height: 150%;">Urgently required for a contracting company in Amman</span></b><b><span dir="LTR" style="font-size: 14pt; line-height: 150%;"></span></b></p>
<p align="center" dir="RTL" style="text-align: center; line-height: 150%; direction: rtl; unicode-bidi: embed;"><b><span style="font-size: 16pt; line-height: 150%;">Electrical Engineer</span></b><span style="font-size: 16pt; line-height: 150%;"> with at least seven years of experience, please</span></p>
<p align="center" dir="RTL" style="text-align: center; line-height: 150%; direction: rtl; unicode-bidi: embed;"><b><span style="font-size: 16pt; line-height: 150%;">Mechanical Engineer</span></b><span style="font-size: 16pt; line-height: 150%;"> with at least seven years of experience, please</span></p>
<p align="center" dir="RTL" style="text-align: center; line-height: 150%; direction: rtl; unicode-bidi: embed;"><span style="font-size: 16pt; line-height: 150%;">those who find themselves qualified are requested to send their CVs and certificates of experience to the following email</span></p>
<p align="center" dir="RTL" style="text-align: center; line-height: 150%; direction: rtl; unicode-bidi: embed;"><b><span style="font-size: 16pt; line-height: 150%;"><a href="mailto:ibs.project2025@gmail.com"><span dir="LTR" style="text-decoration: none;">ibs.project2025@gmail.com</span></a></span></b><b><span style="font-size: 16pt; line-height: 150%;"></span></b></p>
<p align="center" dir="RTL" style="text-align: center; line-height: 150%; direction: rtl; unicode-bidi: embed;"><b><span style="font-size: 16pt; line-height: 150%; color: red;">Note: Recruitment is immediate</span></b></p>
Receive email alerts for Vocational Professional Jobs in Jordan jobs
You can cancel your email alert at anytime