وظائف مهندسين الكتروميكانيكال

<p><h4>Job description</h4> <p><strong>Job role - Principal engineer – mechanical – aviation buildings</strong><br> Verbal and written communication in English is mandatory.</p> <h4>Responsibilities:</h4> <ul> <li>Lead mechanical/HVAC design from feasibility and basis-of-design (BoD) through detailed design, tender and construction support for aviation facilities.</li> <li>Own the environmental strategy for very large volumes (e.g., hangar bays): heating/cooling concepts, destratification, purge/exhaust modes, make-up air, and controls sequences—balancing energy, IAQ and safety (UFC/ASHRAE/NFPA context).</li> <li>Engineer specialist ventilation for hazardous operations: paint spray booths/rooms, fuel-cell maintenance/purge ventilation, welding/fume extraction, VOC control, and hazardous-area interfaces with electrical/controls.</li> <li>Integrate process utilities common to MRO and workshops.</li> <li>Shape catering facility HVAC and hygienic air zones: kitchen exhaust and makeup air (NFPA 96), pressure cascades, temperature/humidity control for clean prep/packing.</li> <li>Deliver BIM-led coordination (Revit/Navisworks) across architecture, structures, process, fire protection, and controls; lead clash resolution and model QA.</li> <li>Run calculations and simulations: loads, duct/pipe sizing, ventilation rates, smoke/fume capture, and (where needed) CFD to support the thermal comfort studies.</li> <li>Author technical documents: BoD, design reports, specifications, sequences of operation, control narratives, FAT/SAT/commissioning plans.</li> <li>Engage stakeholders—airlines/MROs, airport operators, food safety teams, and authorities—to secure approvals and smooth delivery.</li> <li>Lead retrofit, refurbishment, and brownfield upgrade projects within operational airport environments—assessing existing systems, developing phased upgrade strategies, ensuring minimal disruption to ongoing operations, and integrating new systems with legacy infrastructure while addressing capacity, compliance, and energy performance improvements.</li> </ul> <h4>Key systems and domains you’ll cover:</h4> <ul> <li>Hangars and workshops: general and emergency exhaust, purge ventilation for fuel system work, floor-level capture where required, destratification/ HVLS fans, door air management, radiant/air systems, PCA (pre-conditioned air) and GSE interfaces.</li> <li>Catering facilities: high-duty kitchen exhaust and makeup air (hoods, MAUs, heat recovery), grease ducting, rooftop terminations, pressure zoning for hygiene, and interfaces to cold rooms/freezers and clean areas.</li> <li>Experience in refurbishment projects, passenger terminal building mechanical design (HVAC, drainage systems) is preferred.</li> </ul> <h4>Qualifications:</h4> <ul> <li>Bachelor’s or master’s degree in mechanical engineering.</li> <li>Professional registration (e.g., CEng/PE) strongly preferred.</li> <li>15+ years’ experience in building services (mechanical/HVAC), with significant aviation project delivery (passenger terminal building, hangars, MRO shops, flight catering, or similar).</li> <li>Proven leadership as lead/principal engineer on multi-disciplinary design projects and prior delivery in live airport environments (airside/landside interfaces, works phasing) is preferred.</li> <li>Expertise writing BoDs, specifications, P&IDs, control sequences, etc.</li> <li>BIM fluency: Revit, Navisworks; competence with calculations (e.g., IES-VE/HAP/eQuest), CFD exposure preferred.</li> <li>Client-facing communication and team leadership; mentoring and QA/QC across multiple concurrent packages.</li> <li>Strong communication skills for effective client presentations, stakeholder workshops, and cross-functional coordination.</li> <li>Willingness to be based at Dammam Airport for the initial phase of the project (short-term assignment) and relocate to the main office upon project completion.</li> </ul> <p>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the oil & gas, power & renewables, chemicals, construction & infrastructure, life sciences, mining and manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><span><span>About the Job</span></span></u></span><p><span><span>As a </span></span><b><span><span>Senior Software Engineer (Node.js)</span></span></b><span><span> at Aspire, you will design, develop, and maintain scalable, high-performance backend applications and APIs that power our products and services. You will play a key role in building cloud-native applications, designing microservices, and delivering secure, reliable, and maintainable software solutions. Working closely with Product, QA, DevOps, and Engineering teams, you will contribute to the entire software development lifecycle while mentoring junior engineers and driving engineering best practices.</span></span></p><br><u><span><span>What you'll do</span></span></u><ul><li><p><span><span>Design, develop, and maintain scalable backend applications using Node.js and JavaScript/TypeScript.</span></span></p><br></li><li><p><span><span>Build and maintain RESTful APIs and microservices to support business and product requirements.</span></span></p><br></li><li><p><span><span>Develop secure, high-performance, and maintainable backend services following engineering best practices.</span></span></p><br></li><li><p><span><span>Design and optimize SQL and NoSQL database schemas and queries to ensure performance and scalability.</span></span></p><br></li><li><p><span><span>Integrate backend services with third-party APIs, cloud services, and external systems.</span></span></p><br></li><li><p><span><span>Participate in system architecture discussions, technical design, code reviews, and solution planning.</span></span></p><br></li><li><p><span><span>Troubleshoot and resolve production issues while ensuring high system availability and reliability.</span></span></p><br></li><li><p><span><span>Develop unit, integration, and end-to-end tests to maintain high code quality.</span></span></p><br></li><li><p><span><span>Continuously improve application performance, scalability, security, and maintainability.</span></span></p><br></li><li><p><span><span>Collaborate with Product Managers, QA Engineers, DevOps Engineers, and cross-functional teams throughout the software development lifecycle.</span></span></p><br></li><li><p><span><span>Mentor junior engineers through code reviews, technical guidance, and knowledge sharing.</span></span></p><br></li><li><p><span><span>Prepare and maintain technical documentation for applications, APIs, and architectural designs.</span></span></p><br></li></ul><u><span><span>What you'll need</span></span></u><ul><li><p><span><span>Bachelor's Degree in Computer Science, Software Engineering, Information Technology, or a related field.</span></span></p><br></li><li><p><span><span>Minimum of 5 years of professional software development experience, including at least 3 years of hands-on experience with Node.js.</span></span></p><br></li><li><p><span><span>Strong proficiency in JavaScript (ES6+) and TypeScript.</span></span></p><br></li><li><p><span><span>Experience building scalable RESTful APIs and microservices.</span></span></p><br></li><li><p><span><span>Strong understanding of asynchronous programming, event-driven architecture, and Node.js internals.</span></span></p><br></li><li><p><span><span>Experience with Node.js frameworks such as Express.js, NestJS, or similar.</span></span></p><br></li><li><p><span><span>Strong knowledge of SQL and/or NoSQL databases such as PostgreSQL, MySQL, MongoDB, or Redis.</span></span></p><br></li><li><p><span><span>Experience working with Docker and containerized applications.</span></span></p><br></li><li><p><span><span>Experience using Git and modern CI/CD pipelines.</span></span></p><br></li><li><p><span><span>Strong understanding of software design principles, clean architecture, and design patterns.</span></span></p><br></li><li><p><span><span>Excellent analytical, problem-solving, and communication skills.</span></span></p><br></li><li><p><span><span>Experience working with cloud platforms such as AWS, Azure, or Google Cloud Platform is an advantage.</span></span></p><br></li><li><p><span><span>Knowledge of Kubernetes, messaging systems (Kafka/RabbitMQ), and secure application development is a plus.</span></span></p><br></li></ul><u><span><span>Why Aspire</span></span></u><p><span><span>In addition to a competitive long-term total compensation package with salary and performance-based bonus, we have a reward philosophy that goes beyond compensation.</span></span></p><br><ul><li><p><span><span>Be part of a remote-first organization where flexibility is embraced.</span></span></p><br></li><li><p><span><span>Work and learn alongside talented engineers and technology leaders.</span></span></p><br></li><li><p><span><span>Explore opportunities to learn and grow through technical and non-technical training programs.</span></span></p><br></li><li><p><span><span>Gain global exposure by working on products with international teams and clients.</span></span></p><br></li><li><p><span><span>Enjoy our nursery reimbursement benefit.</span></span></p><br></li><li><p><span><span>Attend virtual and in-person international technology conferences to expand your knowledge and network.</span></span></p><br></li></ul><br> </div>

<p>Job Description: Plant Engineer Company:** CROWN Middle East Can Manufacturing Ltd Job Summary The Plant Engineer at CROWN Middle East Can Manufacturing Ltd is responsible for optimizing the operational efficiency and reliability of our manufacturing plant's equipment and facilities. This role involves planning, organizing, and directing the maintenance and engineering activities to ensure safe, cost-effective, and high-quality production of beverage cans.</p><p>Job Responsibilities</p><ul><li>Develop, implement, and manage preventative maintenance programs for all plant machinery, equipment, and facilities to minimize downtime and maximize operational uptime.</li><li>Lead and supervise a team of maintenance technicians, providing guidance, training, and performance evaluations.</li><li>Diagnose and troubleshoot complex mechanical, electrical, and pneumatic issues on production lines and ancillary equipment.</li><li>Manage capital projects from conception to completion, including scope definition, budget adherence, vendor selection, and project execution, ensuring timely and within-budget delivery.</li><li>Identify and implement continuous improvement initiatives to enhance equipment performance, reduce waste, and improve overall plant efficiency and safety.</li><li>Ensure compliance with all relevant health, safety, environmental, and quality regulations and company standards.</li><li>Collaborate with production, quality, and supply chain departments to optimize manufacturing processes and resolve operational challenges.</li><li>Maintain accurate records of maintenance activities, equipment history, and spare parts inventory.</li><li>Source and manage relationships with external contractors and suppliers for specialized services and parts.</li><li>Prepare and manage the annual maintenance budget, controlling expenditures and identifying cost-saving opportunities.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Job Qualifications</p><ul><li>Bachelor's degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering, or a related field.</li><li>Minimum of 2 years of experience in a plant engineering or maintenance management role within a manufacturing environment, preferably in the can manufacturing, packaging, or similar high-volume production industry.</li><li>Strong knowledge of industrial machinery, automation, hydraulics, pneumatics, and electrical systems.</li><li>Proven experience with Computerized Maintenance Management Systems (CMMS).</li><li>Demonstrated ability to lead and motivate a technical team.</li><li>Excellent problem-solving, analytical, and decision-making skills.</li><li>Strong project management skills, with experience managing capital projects.</li><li>Solid understanding of health, safety, and environmental regulations.</li><li>Proficiency in English; Arabic language skills are a plus.</li><li>Ability to work effectively in a fast-paced, demanding manufacturing environment.</li><li>Strong communication and interpersonal skills, capable of interacting effectively at all levels of the organization.</li></ul>

<p><h4>Description</h4> <p>Remote junior AI engineer – computer vision<br> Location: Remote<br> Employment type: Full-time (8 hours) remotely<br> Experience level: Junior (5+ years)</p> <p>InnovationTeam is a forward-thinking technology company that delivers advanced AI and data-driven solutions across multiple industries. We are currently seeking a junior AI engineer – computer vision to join our AI engineering team.</p> <p>As a junior computer vision engineer at InnovationTeam, you will be responsible for designing, developing, and deploying vision-based AI systems for real-world, production environments. You will work closely with cross-functional teams to build scalable image and video analytics solutions.</p> <p>This position requires strong expertise in computer vision, deep learning, and software engineering. The ideal candidate is technically strong, self-driven, and experienced in taking AI models from research to production.</p> <p>At InnovationTeam, we foster a culture of innovation, collaboration, and technical excellence, offering an environment where junior engineers can make a meaningful impact.</p> <h4>Role overview</h4> <p>We are seeking a skilled AI engineer with a strong focus on computer vision to develop, optimize, and deploy vision-based AI solutions. The role involves working on real-world image and video analytics problems and delivering production-ready AI systems.</p> <h4>Requirements</h4> <ul> <li>Develop and train computer vision models for image and video analysis.</li> <li>Implement solutions for object detection, image classification, segmentation, and tracking.</li> <li>Prepare and manage datasets, including data cleaning, labelling, and augmentation.</li> <li>Optimize models for GPU performance, inference speed, and scalability.</li> <li>Deploy AI models into production using APIs and containerized services.</li> <li>Integrate computer vision models with broader AI and analytics platforms.</li> <li>Collaborate with software engineers, data scientists, and product teams.</li> <li>Maintain documentation and ensure code quality and reproducibility.</li> </ul> <h4>Required skills & qualifications</h4> <ul> <li>Minimum 2 years of hands-on experience in AI / machine learning / deep learning with a focus on computer vision.</li> <li>Master’s degree in computer science, software engineering, artificial intelligence, engineering, or a related field.</li> <li>Strong knowledge of computer vision concepts and algorithms.</li> <li>Practical experience with CNN-based models and modern CV architectures.</li> <li>Proficiency in Python and common ML / CV libraries (PyTorch or TensorFlow, OpenCV).</li> <li>Experience with object detection and segmentation frameworks (e.g., YOLO, Detectron2).</li> <li>Understanding of model evaluation, metrics, and performance optimization.</li> <li>Experience deploying models in cloud or on-prem environments.</li> <li>Familiarity with Docker and basic MLOps practices.</li> <li>Excellent English communication skills (written and spoken).</li> </ul> <h4>Nice to have</h4> <ul> <li>Experience with video analytics or real-time inference.</li> <li>Exposure to vision transformers or multimodal AI.</li> <li>Experience with GPU-based training and inference.</li> <li>Knowledge of cloud platforms (OCI, AWS, Azure, or GCP).</li> <li>Background in domains such as healthcare, smart cities, or industrial AI.</li> </ul> <h4>Benefits</h4> <ul> <li>Work on practical, production-grade computer vision solutions.</li> <li>Access to GPU infrastructure and modern AI tooling.</li> <li>Collaborative, engineering-focused work environment.</li> <li>Opportunities for growth and advanced AI exposure.</li> <li>Competitive compensation package.</li> </ul></p><p></p>

<p><h4>Description</h4> <p>Please submit your CV in English and indicate your level of English proficiency.</p> <p>Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems. Participation is project-based, not permanent employment.</p> <h4>What this opportunity involves</h4> <p>While each project involves unique tasks, contributors may:</p> <ul> <li>Design original computational engineering problems that simulate real engineering workflows;</li> <li>Create problems requiring Python programming to solve engineering calculations and simulations;</li> <li>Ensure problems are computationally intensive and require numerical methods or iterative solutions;</li> <li>Develop problems involving system design, optimization, and analysis;</li> <li>Base problems on real research challenges or practical applications from engineering practice;</li> <li>Verify solutions using Python with standard engineering libraries;</li> <li>Document problem statements clearly and provide verified correct answers.</li> </ul> <h4>What we look for</h4> <p>This opportunity is a good fit for engineers with experience in Python open to part-time, non-permanent projects. Ideally, contributors will have:</p> <ul> <li>Degree in Mechanical Engineering or related fields;</li> <li>Python proficiency for numerical validation. MATLAB, R, C, SQL, Numpy, Pandas, SciPy, domain-specific libraries, Stata, or knowledge of any programming language can be equivalent;</li> <li>2+ years of professional experience: applied, research, or teaching experience is applicable;</li> <li>Understanding of practical engineering constraints and approximations;</li> <li>Strong written English (C1+);</li> <li>Professional certifications (e.g., CMME, SAS Certifications, CAP) and experience in international or applied projects are an advantage.</li> </ul> <h4>How it works</h4> <p>Apply → Pass qualification(s) → Join a project → Complete tasks → Get paid</p> <h4>Project time expectations</h4> <p>For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements. This is an estimate, not a guaranteed workload, and applies only while the project is active.</p> <h4>Compensation</h4> <p>On this project, contributors can earn up to $37 per hour equivalent, depending on their level and pace of contribution.</p> <p>Compensation varies across projects depending on scope, complexity, and required expertise. Please note that other projects on the platform may offer different earning levels based on their requirements.</p></p><p></p>

<p><h4>Description</h4> <p>Please submit your CV in English and indicate your level of English proficiency.</p> <p>Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems. Participation is project-based, not permanent employment.</p> <h4>What this opportunity involves</h4> <p>While each project involves unique tasks, contributors may:</p> <ul> <li>Design original computational engineering problems that simulate real engineering workflows;</li> <li>Create problems requiring Python programming to solve engineering calculations and simulations;</li> <li>Ensure problems are computationally intensive and require numerical methods or iterative solutions;</li> <li>Develop problems involving system design, optimization, and analysis;</li> <li>Base problems on real research challenges or practical applications from engineering practice;</li> <li>Verify solutions using Python with standard engineering libraries;</li> <li>Document problem statements clearly and provide verified correct answers.</li> </ul> <h4>What we look for</h4> <p>This opportunity is a good fit for engineers with experience in Python open to part-time, non-permanent projects. Ideally, contributors will have:</p> <ul> <li>Degree in Mechanical Engineering or related fields;</li> <li>Python proficiency for numerical validation. MATLAB, R, C, SQL, Numpy, Pandas, SciPy, domain-specific libraries, Stata, or knowledge of any programming language can be equivalent;</li> <li>2+ years of professional experience: applied, research, or teaching experience is applicable;</li> <li>Understanding of practical engineering constraints and approximations;</li> <li>Strong written English (C1+);</li> <li>Professional certifications (e.g., CMME, SAS Certifications, CAP) and experience in international or applied projects are an advantage.</li> </ul> <h4>How it works</h4> <p>Apply → Pass qualification(s) → Join a project → Complete tasks → Get paid</p> <h4>Project time expectations</h4> <p>For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements. This is an estimate, not a guaranteed workload, and applies only while the project is active.</p> <h4>Compensation</h4> <p>On this project, contributors can earn up to $37 per hour equivalent, depending on their level and pace of contribution.</p> <p>Compensation varies across projects depending on scope, complexity, and required expertise. Please note that other projects on the platform may offer different earning levels based on their requirements.</p></p><p></p>

<p>As a GTM Data Engineer at Aspire, you will build the data infrastructure and intelligence layer that powers Indeed's Go-To-Market revenue engine u2014 including lead routing, advertiser identity resolution, campaign segmentation, and Sales tooling across Salesforce, Snowflake, and GCP. You will build and maintain data pipelines, model GTM data assets, and collaborate with engineers and product managers to deliver on project deliverables. This role requires a strong focus on data quality, validation, and schema management across GTM data marts. This position is open to candidates in LATAM with core working hours of 9 a.m. u2013 5 p.m. CT (US Central time).</p><p>What You'll Do</p><ul><li>Build and maintain data pipelines across Snowflake, Salesforce Data Cloud, and GCP.</li><li>Model and maintain GTM data assets, including parent company, advertiser identity, lead enrichment, and revenue data.</li><li>Collaborate with engineers and Product Managers on GTMDR JIRA project deliverables.</li><li>Write and optimize SQL/IQL queries for reporting and analytics use cases.</li><li>Support data quality, validation, and schema management across GTM data marts.</li></ul><p>What You'll Need</p><ul><li>Strong SQL and Snowflake experience (required).</li><li>Strong Python scripting skills for data transformation.</li><li>Experience building ETL/ELT pipelines using dbt, Airflow, or similar orchestration tools.</li><li>Experience with GCP or AWS cloud data platforms.</li><li>Familiarity with CRM data (leads, contacts, accounts, opportunities).</li><li>Ability to work during US Central time (CDT/CST) core hours (9 a.m. u2013 5 p.m. CT).</li><li>Experience with Salesforce SOQL.</li><li>Experience with ZoomInfo or D&amp;B data enrichment.</li><li>Experience with GTM or revenue analytics.</li><li>Experience with Salesforce Data Cloud or Salesforce data models (preferred).</li></ul><p>Why Aspire</p><p>In addition to a competitive long-term total compensation package with salary and performance-based bonus, we have a reward philosophy that goes beyond compensation. Be part of a remote-first organization where flexibility is embraced. Work and learn alongside talented engineers and technology leaders. Explore opportunities to learn and grow through technical and non-technical training programs. Gain global exposure by working on products with international teams and clients. Attend virtual and in-person international technology conferences to expand your knowledge and network.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Strong SQL and Snowflake experience (required).</li><li>Strong Python scripting skills for data transformation.</li><li>Experience building ETL/ELT pipelines using dbt, Airflow, or similar orchestration tools.</li><li>Experience with GCP or AWS cloud data platforms.</li><li>Familiarity with CRM data (leads, contacts, accounts, opportunities).</li><li>Ability to work during US Central time (CDT/CST) core hours (9 a.m. u2013 5 p.m. CT).</li><li>Experience with Salesforce SOQL.</li><li>Experience with ZoomInfo or D&amp;B data enrichment.</li><li>Experience with GTM or revenue analytics.</li><li>Experience with Salesforce Data Cloud or Salesforce data models (preferred).</li></ul>

<p><h4>Description</h4> <p>InnovationTeam is a forward-thinking technology company that delivers advanced AI and data-driven solutions across multiple industries. We are currently seeking a junior AI engineer – computer vision to join our AI engineering team.</p> <p>As a junior computer vision engineer at InnovationTeam, you will be responsible for designing, developing, and deploying vision-based AI systems for real-world, production environments. You will work closely with cross-functional teams to build scalable image and video analytics solutions.</p> <p>This position requires strong expertise in computer vision, deep learning, and software engineering. The ideal candidate is technically strong, self-driven, and experienced in taking AI models from research to production.</p> <p>At InnovationTeam, we foster a culture of innovation, collaboration, and technical excellence, offering an environment where junior engineers can make a meaningful impact.</p> <h4>Role overview</h4> <p>We are seeking a skilled AI engineer with a strong focus on computer vision to develop, optimize, and deploy vision-based AI solutions. The role involves working on real-world image and video analytics problems and delivering production-ready AI systems.</p> <h4>Key responsibilities</h4> <ul> <li>Develop and train computer vision models for image and video analysis.</li> <li>Implement solutions for object detection, image classification, segmentation, and tracking.</li> <li>Prepare and manage datasets, including data cleaning, labeling, and augmentation.</li> <li>Optimize models for GPU performance, inference speed, and scalability.</li> <li>Deploy AI models into production using APIs and containerized services.</li> <li>Integrate computer vision models with broader AI and analytics platforms.</li> <li>Collaborate with software engineers, data scientists, and product teams.</li> <li>Maintain documentation and ensure code quality and reproducibility.</li> </ul> <h4>Required skills & qualifications</h4> <ul> <li>Minimum 2 years of hands-on experience in AI, machine learning, or deep learning with a focus on computer vision.</li> <li>Master’s degree in computer science, software engineering, artificial intelligence, engineering, or a related field.</li> <li>Strong knowledge of computer vision concepts and algorithms.</li> <li>Practical experience with CNN-based models and modern CV architectures.</li> <li>Proficiency in Python and common ML/CV libraries (PyTorch or TensorFlow, OpenCV).</li> <li>Experience with object detection and segmentation frameworks (e.g., YOLO, Detectron2).</li> <li>Understanding of model evaluation, metrics, and performance optimization.</li> <li>Experience deploying models in cloud or on-prem environments.</li> <li>Familiarity with Docker and basic MLOps practices.</li> <li>Excellent English communication skills (written and spoken).</li> </ul> <h4>Nice to have</h4> <ul> <li>Experience with video analytics or real-time inference.</li> <li>Exposure to vision transformers or multimodal AI.</li> <li>Experience with GPU-based training and inference.</li> <li>Knowledge of cloud platforms (OCI, AWS, Azure, or GCP).</li> <li>Background in domains such as healthcare, smart cities, or industrial AI.</li> </ul> <h4>What we offer</h4> <ul> <li>Work on practical, production-grade computer vision solutions.</li> <li>Access to GPU infrastructure and modern AI tooling.</li> <li>Collaborative, engineering-focused work environment.</li> <li>Opportunities for growth and advanced AI exposure.</li> <li>Competitive compensation package.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>1&nbsp;&nbsp;BACKGROUND</p><p>Job Title:&nbsp;&nbsp;Technical Support Engineer&nbsp;</p><p>Location:&nbsp;&nbsp;Jordan-International</p><p>Reference ID:&nbsp;&nbsp;ST-JOB-20260715-TSE</p><p>Posting Date:&nbsp;&nbsp;July 15th, 2026</p><p>Resumes:&nbsp;&nbsp;Please visit Seethru.ai contact page.</p><p><br></p><p>1.1&nbsp;&nbsp;ABOUT SEETHRU AI</p><p>Seethru AI Inc. is a leading manufacturer of x-ray technology for cargo inspection, with headquarters near Boston—USA, and a global network of partners. The role posted herein is based in Jordan and supports the operations in Jordan and globally. Interested applicants are encouraged to email their resumes to our contact page at seethru.ai.</p><p><br></p><p>1.2&nbsp;&nbsp;ROLE DESCRIPTION</p><p>Technical Support Engineer, supporting operations in the factory and field preventive and corrective maintenance, installation, and training for Seethru AI x-ray inspection equipment. The role will be based in Jordan and support Seethru equipment worldwide.</p><p><br></p><p>1.3&nbsp;&nbsp;TRAVEL</p><p>This job requires 25% - 50% travel to support new or existing customers.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>2&nbsp;&nbsp;MINIMUM REQUIREMENTS</p><p>2.1&nbsp;&nbsp;EDUCATION</p><p>B.S. Engineering degree in Electrical, Mechanical, Industrial, Communications, or similar discipline.</p><p><br></p><p>2.2&nbsp;&nbsp;ENGLISH LANGUAGE PROFICIENCY</p><p>Proficient in English; reading, writing, and speaking.</p><p><br></p><p>2.3&nbsp;&nbsp;RESOURCFULL AND SELF-LEARNER</p><p>The successful candidate is not expected to have experience with similar technologies, hence Seethru will provide training. It is very important, however, for the successful candidate to be resourceful and able to find solutions for new problems unseen before.</p><p><br></p><p>2.4&nbsp;&nbsp;SKILLS</p><ol><li>ELECTRICAL: Theoretical understanding and physical handing of electrical circuits with Direct and Alternating Current (DC/AC), Power, Voltage, Current, and Wiring. Shall be able to debug electrical wiring diagrams and circuits.</li><li>MECHANICAL: Principles of Mechanical systems and related Physics including Power, Torque, and Heating and Cooling.</li><li>COMPUTER: Very good working knowledge of Microsoft Windows computers and networks, covering: (a) Operating system and Microsoft Office suite: Outlook, Word, Excel, and PowerPoint; (b) Good understanding of computer networks, with emphasis on TCP/IP v4, IP addresses, and subnets. Configuring WiFi and Ethernet LAN; (c) Good working knowledge with Windows Command Prompt.</li><li>COMMUNICATIONS: Excellent communication skills with Seethru team members, suppliers, and customers. Given the nature of the business, most communications shall be in English.</li><li>TEAM PLAY: Shall be a team player, treating fellow team members with mutual respect.</li><li>TRAINING: Shall be able to train customer on Seethru technologies in Jordan and abroad.</li></ol><p><br></p><p>3&nbsp;&nbsp;RELEVANT EXPERIENCE</p><p>Two (or more) years of relevant experience is highly desired but may be substituted with strong academic credentials and understanding of the required skills above.</p><p>3.1&nbsp;&nbsp;ADDITIONAL EXPERIENCE</p><p>Experience in these areas is not a must, but a strong plus: HVAC, Induction Motors and Motor Drive Controllers, Control Systems, Serial Communications (RS485, RS232, Modbus), PLCs, Teaching, and CCTV Camera Systems.</p><p><br></p><p>4&nbsp;&nbsp;COMPENSATION</p><p>We offer competitive compensation packages, which will be determined based on skills and experience.</p><p><br></p><p>5&nbsp;&nbsp;JOB DUTIES</p><p>As a Technical Support Engineer, travel inside or outside Jordan is expected to support customers. The job duties include the following:</p><ol><li>Support the operations activities in Jordan including Electrical, Mechanical, and Software.</li><li>Respond to customer technical inquires, support diagnostic and resolution of customer technical issues. Support may be performed remotely or may require travel to customer sites.</li><li>Support installation and commissioning of equipment at customer sites.</li><li>Provide technical training to customers on the operation and maintenance of equipment.</li><li>Perform Factory and Site Acceptance Tests (FAT/SAT).</li></ol></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p ><b><u><span>Job Summary</span></u></b></p> <p ><b><span>Arab Potash Company is seeking a dedicated and experienced Chemical Engineer to supervise and manage process engineering activities throughout the project lifecycle, from conceptual studies and FEED to detailed engineering and project execution. The successful candidate will ensure that process engineering deliverables comply with project specifications, contractual requirements, and engineering standards while coordinating effectively with multidisciplinary teams.</span></b></p> <p ><b><span>&nbsp;</span></b><b><u><span>Duties and Responsibilities</span></u></b></p> <ul> <li ><b><span>Perform <span>&nbsp;</span>process engineering activities</span></b></li> <li ><b><span>Supervise and manage process engineering activities throughout the project lifecycle (conceptual design, FEED, detailed design, and execution).</span></b></li> <li ><b><span>Coordinate with internal teams, including Process, Production, Mechanical, Electrical, Instrumentation, and Safety, to ensure alignment with project requirements.</span></b></li> <li ><b><span>Review engineering deliverables prepared by contractors and consultants to ensure technical accuracy, completeness, and compliance.</span></b></li> <li ><b><span>Ensure that all process engineering documents comply with project specifications, contractual requirements, and applicable engineering standards.</span></b></li> <li ><b><span>Maintain accurate documentation and implement effective version control for all process engineering deliverables throughout the project phases.</span></b></li> <li ><b><span>Support project execution by providing technical guidance and resolving process engineering issues as required.</span></b></li> </ul> &nbsp; &nbsp; </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 7+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p><h4>Responsibilities:</h4> <p><strong>Lead electrical design</strong> from feasibility and basis of design (BoD) through detailed design, tender, and construction support for aviation facilities.</p> <p><strong>Own the electrical power strategy</strong> for large-scale facilities (e.g., hangar bays): MV/LV distribution, redundancy, load management, earthing, and control philosophies—balancing reliability, safety, and energy performance (IEC/NFPA context).</p> <p><strong>Engineer electrical systems</strong> for hazardous operations: paint booths/rooms, fuel-cell maintenance areas, welding zones—ensuring compliance with ATEX/IECEx and coordination with mechanical ventilation and controls.</p> <p><strong>Design and specify power systems</strong> for aviation facilities: transformers, generators, UPS, distribution boards, and backup systems for mission-critical operations.</p> <p><strong>Integrate electrical utilities</strong> across MRO and workshop environments—ground power units (GPU), PCA interfaces, process equipment loads, and coordination with mechanical, fire/life safety, and control systems.</p> <p><strong>Shape electrical systems</strong> for catering facilities: resilient power distribution for kitchens, cold-chain systems, and hygienic areas aligned with HACCP/ISO 22000 requirements.</p> <p><strong>Deliver BIM-led coordination</strong> (Revit/Navisworks) across architecture, structures, MEP, and specialist systems; lead clash resolution and model QA.</p> <p><strong>Perform calculations and studies:</strong> load estimation, cable sizing, protection coordination, short-circuit analysis, and lighting design.</p> <p><strong>Author technical documents:</strong> BoD, load schedules, single-line diagrams (SLDs), specifications, and commissioning plans.</p> <p><strong>Mentor and review engineers/designers;</strong> lead design reviews, HAZOPs, and constructability/operability workshops.</p> <p><strong>Engage stakeholders</strong>—airlines, MROs, airport operators, and authorities—to secure approvals and ensure smooth delivery.</p> <p><strong>Lead retrofit, refurbishment, and brownfield upgrades</strong> in operational airport environments—assessing existing systems, planning phased upgrades, and integrating new systems with minimal disruption while improving capacity, compliance, and energy performance.</p> <h4>Key systems & domains you’ll cover:</h4> <ul> <li>Hangars & workshops: MV/LV distribution, ground power units (GPU), PCA electrical interfaces, high-bay lighting, emergency power, earthing and bonding for aircraft safety, and hangar door electrics.</li> <li>Paint/corrosion control: hazardous-area electrical systems, explosion-proof equipment, interlocks, LEL monitoring interfaces, and ATEX/IECEx compliance coordinated with ventilation and controls.</li> <li>Welding & fabrication: power distribution for welding equipment, equipment earthing, task lighting, and integration with extraction/LEV systems aligned with OSHA/ACGIH guidance.</li> <li>Power systems: transformers, generators, UPS, LV panels, and distribution networks designed for redundancy, resilience, and mission-critical operations.</li> <li>Catering facilities: resilient power supply for kitchens, cold rooms/freezers, food processing areas, and hygienic zoning aligned with HACCP/ISO 22000 requirements.</li> <li>ELV & controls: fire alarm systems (NFPA 72), ICT, security (CCTV/access control), structured cabling, and BMS/SCADA integration for operational monitoring and control.</li> </ul> <h4>Qualifications:</h4> <ul> <li>Bachelor’s degree in electrical engineering; master’s degree preferred.</li> <li>Professionally registered (CEng, PE, or equivalent).</li> <li>15+ years' experience in electrical building services design, including aviation and complex infrastructure projects.</li> <li>Demonstrated experience leading multidisciplinary design teams and delivering major projects.</li> </ul> <h4>Technical expertise:</h4> <ul> <li>Strong knowledge of international electrical design codes, standards, and aviation requirements.</li> <li>Expertise in MV/LV power distribution, load assessments, protection systems, and earthing design.</li> <li>Proficiency in BIM and industry-standard design software, including Revit, Navisworks, ETAP, and Dialux.</li> <li>Experience in airport facilities, terminal buildings, and aviation-related infrastructure is highly desirable.</li> </ul></p><p></p>

<p><h4>Responsibilities:</h4> <p><strong>Lead electrical design</strong> from feasibility and basis of design (BoD) through detailed design, tender, and construction support for aviation facilities.</p> <p><strong>Own the electrical power strategy</strong> for large-scale facilities (e.g., hangar bays): MV/LV distribution, redundancy, load management, earthing, and control philosophies—balancing reliability, safety, and energy performance (IEC/NFPA context).</p> <p><strong>Engineer electrical systems</strong> for hazardous operations: paint booths/rooms, fuel-cell maintenance areas, welding zones—ensuring compliance with ATEX/IECEx and coordination with mechanical ventilation and controls.</p> <p><strong>Design and specify power systems</strong> for aviation facilities: transformers, generators, UPS, distribution boards, and backup systems for mission-critical operations.</p> <p><strong>Integrate electrical utilities</strong> across MRO and workshop environments—ground power units (GPU), PCA interfaces, process equipment loads, and coordination with mechanical, fire/life safety, and control systems.</p> <p><strong>Shape electrical systems</strong> for catering facilities: resilient power distribution for kitchens, cold-chain systems, and hygienic areas aligned with HACCP/ISO 22000 requirements.</p> <p><strong>Deliver BIM-led coordination</strong> (Revit/Navisworks) across architecture, structures, MEP, and specialist systems; lead clash resolution and model QA.</p> <p><strong>Perform calculations and studies:</strong> load estimation, cable sizing, protection coordination, short-circuit analysis, and lighting design.</p> <p><strong>Author technical documents:</strong> BoD, load schedules, single-line diagrams (SLDs), specifications, and commissioning plans.</p> <p><strong>Mentor and review engineers/designers;</strong> lead design reviews, HAZOPs, and constructability/operability workshops.</p> <p><strong>Engage stakeholders</strong>—airlines, MROs, airport operators, and authorities—to secure approvals and ensure smooth delivery.</p> <p><strong>Lead retrofit, refurbishment, and brownfield upgrades</strong> in operational airport environments—assessing existing systems, planning phased upgrades, and integrating new systems with minimal disruption while improving capacity, compliance, and energy performance.</p> <h4>Key systems & domains you’ll cover:</h4> <ul> <li>Hangars & workshops: MV/LV distribution, ground power units (GPU), PCA electrical interfaces, high-bay lighting, emergency power, earthing and bonding for aircraft safety, and hangar door electrics.</li> <li>Paint/corrosion control: hazardous-area electrical systems, explosion-proof equipment, interlocks, LEL monitoring interfaces, and ATEX/IECEx compliance coordinated with ventilation and controls.</li> <li>Welding & fabrication: power distribution for welding equipment, equipment earthing, task lighting, and integration with extraction/LEV systems aligned with OSHA/ACGIH guidance.</li> <li>Power systems: transformers, generators, UPS, LV panels, and distribution networks designed for redundancy, resilience, and mission-critical operations.</li> <li>Catering facilities: resilient power supply for kitchens, cold rooms/freezers, food processing areas, and hygienic zoning aligned with HACCP/ISO 22000 requirements.</li> <li>ELV & controls: fire alarm systems (NFPA 72), ICT, security (CCTV/access control), structured cabling, and BMS/SCADA integration for operational monitoring and control.</li> </ul> <h4>Qualifications:</h4> <ul> <li>Bachelor’s degree in electrical engineering; master’s degree preferred.</li> <li>Professionally registered (CEng, PE, or equivalent).</li> <li>15+ years' experience in electrical building services design, including aviation and complex infrastructure projects.</li> <li>Demonstrated experience leading multidisciplinary design teams and delivering major projects.</li> </ul> <h4>Technical expertise:</h4> <ul> <li>Strong knowledge of international electrical design codes, standards, and aviation requirements.</li> <li>Expertise in MV/LV power distribution, load assessments, protection systems, and earthing design.</li> <li>Proficiency in BIM and industry-standard design software, including Revit, Navisworks, ETAP, and Dialux.</li> <li>Experience in airport facilities, terminal buildings, and aviation-related infrastructure is highly desirable.</li> </ul></p><p></p>

<p><h4>Job role - Principal Electrical Design Engineer – Mission Critical (Data Centres)</h4> <p>Verbal and written communication in English is mandatory.</p> <p><strong>Strong experience</strong></p> <ul> <li>12+ years in data center/mission critical projects</li> <li>Hyperscale/colocation data center experience</li> <li>UAE/KSA (GCC) project exposure</li> <li>Client-facing leadership and business development experience</li> <li>Experience leading multidisciplinary engineering teams in a consulting environment</li> </ul> <p><strong>Responsibilities</strong></p> <ul> <li>Lead the design, integration, and delivery of electrical and MEP systems for mission-critical data centre projects.</li> <li>Provide technical governance by reviewing and approving engineering deliverables aligned with global standards and client requirements.</li> <li>Drive development of modular, cloud, colocation, and hyperscale data centre solutions.</li> <li>Act as the primary client interface, building trusted advisory relationships across key accounts in the region.</li> <li>Lead technical workshops, design reviews, and senior stakeholder presentations.</li> <li>Own project strategy, ensuring delivery excellence across lifecycle stages from concept to execution.</li> <li>Drive business development including bid leadership, proposal strategy, and commercial positioning.</li> <li>Identify and capitalize on opportunities in digital infrastructure, hyperscale, and cloud ecosystems.</li> <li>Collaborate with regional leadership to expand the mission-critical/data centre service offering.</li> <li>Lead, mentor, and develop multidisciplinary engineering teams across electrical, mechanical, civil, and architecture.</li> <li>Oversee resource planning, utilization, and capability development within the data centre practice.</li> <li>Ensure all solutions meet benchmarks for resilience, sustainability, scalability, and operational efficiency.</li> </ul> <p><strong>Qualifications</strong></p> <ul> <li>Bachelor’s degree in Electrical Engineering or a related field; Master’s preferred.</li> <li>12+ years of experience in mission-critical/data centre design, delivery, or advisory.</li> <li>Strong understanding of Tier standards, NFPA, ASHRAE, Uptime Institute guidelines.</li> <li>Proven experience in GCC markets (UAE and/or KSA).</li> <li>Experience working with large consultancies or international engineering firms.</li> <li>Excellent leadership, communication, and client-facing abilities.</li> </ul></p><p></p>

<p><h4>Job role - Principal Electrical Design Engineer – Mission Critical (Data Centres)</h4> <p>Verbal and written communication in English is mandatory.</p> <p><strong>Strong experience</strong></p> <ul> <li>12+ years in data center/mission critical projects</li> <li>Hyperscale/colocation data center experience</li> <li>UAE/KSA (GCC) project exposure</li> <li>Client-facing leadership and business development experience</li> <li>Experience leading multidisciplinary engineering teams in a consulting environment</li> </ul> <p><strong>Responsibilities</strong></p> <ul> <li>Lead the design, integration, and delivery of electrical and MEP systems for mission-critical data centre projects.</li> <li>Provide technical governance by reviewing and approving engineering deliverables aligned with global standards and client requirements.</li> <li>Drive development of modular, cloud, colocation, and hyperscale data centre solutions.</li> <li>Act as the primary client interface, building trusted advisory relationships across key accounts in the region.</li> <li>Lead technical workshops, design reviews, and senior stakeholder presentations.</li> <li>Own project strategy, ensuring delivery excellence across lifecycle stages from concept to execution.</li> <li>Drive business development including bid leadership, proposal strategy, and commercial positioning.</li> <li>Identify and capitalize on opportunities in digital infrastructure, hyperscale, and cloud ecosystems.</li> <li>Collaborate with regional leadership to expand the mission-critical/data centre service offering.</li> <li>Lead, mentor, and develop multidisciplinary engineering teams across electrical, mechanical, civil, and architecture.</li> <li>Oversee resource planning, utilization, and capability development within the data centre practice.</li> <li>Ensure all solutions meet benchmarks for resilience, sustainability, scalability, and operational efficiency.</li> </ul> <p><strong>Qualifications</strong></p> <ul> <li>Bachelor’s degree in Electrical Engineering or a related field; Master’s preferred.</li> <li>12+ years of experience in mission-critical/data centre design, delivery, or advisory.</li> <li>Strong understanding of Tier standards, NFPA, ASHRAE, Uptime Institute guidelines.</li> <li>Proven experience in GCC markets (UAE and/or KSA).</li> <li>Experience working with large consultancies or international engineering firms.</li> <li>Excellent leadership, communication, and client-facing abilities.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>As a Senior Software Engineer (Node.js) at Aspire, you will design, develop, and maintain scalable, high-performance backend applications and APIs that power our products and services. You will play a key role in building cloud-native applications, designing microservices, and delivering secure, reliable, and maintainable software solutions. Working closely with Product, QA, DevOps, and Engineering teams, you will contribute to the entire software development lifecycle while mentoring junior engineers and driving engineering best practices.</p><p>What you'll do</p><ul><li>Design, develop, and maintain scalable backend applications using Node.js and JavaScript/TypeScript.</li><li>Build and maintain RESTful APIs and microservices to support business and product requirements.</li><li>Develop secure, high-performance, and maintainable backend services following engineering best practices.</li><li>Design and optimize SQL and NoSQL database schemas and queries to ensure performance and scalability.</li><li>Integrate backend services with third-party APIs, cloud services, and external systems.</li><li>Participate in system architecture discussions, technical design, code reviews, and solution planning.</li><li>Troubleshoot and resolve production issues while ensuring high system availability and reliability.</li><li>Develop unit, integration, and end-to-end tests to maintain high code quality.</li><li>Continuously improve application performance, scalability, security, and maintainability.</li><li>Collaborate with Product Managers, QA Engineers, DevOps Engineers, and cross-functional teams throughout the software development lifecycle.</li><li>Mentor junior engineers through code reviews, technical guidance, and knowledge sharing.</li><li>Prepare and maintain technical documentation for applications, APIs, and architectural designs.</li></ul><p>What you'll need</p><ul><li>Bachelor's Degree in Computer Science, Software Engineering, Information Technology, or a related field.</li><li>Minimum of 5 years of professional software development experience, including at least 3 years of hands-on experience with Node.js.</li><li>Strong proficiency in JavaScript (ES6+) and TypeScript.</li><li>Experience building scalable RESTful APIs and microservices.</li><li>Strong understanding of asynchronous programming, event-driven architecture, and Node.js internals.</li><li>Experience with Node.js frameworks such as Express.js, NestJS, or similar.</li><li>Strong knowledge of SQL and/or NoSQL databases such as PostgreSQL, MySQL, MongoDB, or Redis.</li><li>Experience working with Docker and containerized applications.</li><li>Experience using Git and modern CI/CD pipelines.</li><li>Strong understanding of software design principles, clean architecture, and design patterns.</li><li>Excellent analytical, problem-solving, and communication skills.</li><li>Experience working with cloud platforms such as AWS, Azure, or Google Cloud Platform is an advantage.</li><li>Knowledge of Kubernetes, messaging systems (Kafka/RabbitMQ), and secure application development is a plus.</li></ul><p>Why Aspire</p><p>In addition to a competitive long-term total compensation package with salary and performance-based bonus, we have a reward philosophy that goes beyond compensation. Be part of a remote-first organization where flexibility is embraced. Work and learn alongside talented engineers and technology leaders. Explore opportunities to learn and grow through technical and non-technical training programs. Gain global exposure by working on products with international teams and clients. Enjoy our nursery reimbursement benefit. Attend virtual and in-person international technology conferences to expand your knowledge and network.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree in Computer Science, Software Engineering, Information Technology, or a related field.</li><li>Minimum of 5 years of professional software development experience, including at least 3 years of hands-on experience with Node.js.</li><li>Strong proficiency in JavaScript (ES6+) and TypeScript.</li><li>Experience building scalable RESTful APIs and microservices.</li><li>Strong understanding of asynchronous programming, event-driven architecture, and Node.js internals.</li><li>Experience with Node.js frameworks such as Express.js, NestJS, or similar.</li><li>Strong knowledge of SQL and/or NoSQL databases such as PostgreSQL, MySQL, MongoDB, or Redis.</li><li>Experience working with Docker and containerized applications.</li><li>Experience using Git and modern CI/CD pipelines.</li><li>Strong understanding of software design principles, clean architecture, and design patterns.</li><li>Excellent analytical, problem-solving, and communication skills.</li><li>Experience working with cloud platforms such as AWS, Azure, or Google Cloud Platform is an advantage.</li><li>Knowledge of Kubernetes, messaging systems (Kafka/RabbitMQ), and secure application development is a plus.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Job Role -Principal Engineer – Electrical (Aviation)&nbsp;<br>Verbal and written communication in English is mandatory<br>Responsibilities:</strong><ul><li>Lead electrical design from feasibility and Basis of Design (BoD) through detailed design, tender and construction support for aviation facilities.</li><li>Own the electrical power strategy for large-scale facilities (e.g., hangar bays): MV/LV distribution, redundancy, load management, earthing, and control philosophies—balancing reliability, safety, and energy performance (IEC/NFPA context).</li><li>Engineer electrical systems for hazardous operations: paint booths/rooms, fuel-cell maintenance areas, welding zones—ensuring compliance with ATEX/IECEx and coordination with mechanical ventilation and controls.</li><li>Design and specify power systems for aviation facilities: transformers, generators, UPS, distribution boards, and backup systems for mission-critical operations.</li><li>Integrate electrical utilities across MRO and workshop environments—ground power units (GPU), PCA interfaces, process equipment loads, and coordination with mechanical, fire/life safety, and control systems.</li><li>Shape electrical systems for catering facilities: resilient power distribution for kitchens, cold-chain systems, and hygienic areas aligned with HACCP/ISO 22000 requirements.</li><li>Deliver BIM-led coordination (Revit/Navisworks) across architecture, structures, MEP, and specialist systems; lead clash resolution and model QA.</li><li>Perform calculations and studies: load estimation, cable sizing, protection coordination, short-circuit analysis, and lighting design.</li><li>Author technical documents: BoD, load schedules, single-line diagrams (SLDs), specifications, and commissioning plans.</li><li>Mentor and review engineers/designers; lead design reviews, HAZOPs, and constructability/operability workshops.</li><li>Engage stakeholders—airlines, MROs, airport operators, and authorities—to secure approvals and ensure smooth delivery.</li><li>Lead retrofit, refurbishment, and brownfield upgrades in operational airport environments—assessing existing systems, planning phased upgrades, and integrating new systems with minimal disruption while improving capacity, compliance, and energy performance.</li></ul><strong>Key systems &amp; domains you’ll cover:</strong><ul><li>Hangars &amp; workshops: MV/LV distribution, ground power units (GPU), PCA electrical interfaces, high-bay lighting, emergency power, earthing and bonding for aircraft safety, and hangar door electrics.&nbsp;</li><li>Paint/corrosion control: hazardous-area electrical systems, explosion-proof equipment, interlocks, LEL monitoring interfaces, and ATEX/IECEx compliance coordinated with ventilation and controls.&nbsp;</li><li>Welding &amp; fabrication: power distribution for welding equipment, equipment earthing, task lighting, and integration with extraction/LEV systems aligned with OSHA/ACGIH guidance.&nbsp;</li><li>Power systems: transformers, generators, UPS, LV panels, and distribution networks designed for redundancy, resilience, and mission-critical operations.&nbsp;</li><li>Catering facilities: resilient power supply for kitchens, cold rooms/freezers, food processing areas, and hygienic zoning aligned with HACCP/ISO 22000 requirements.&nbsp;</li><li>ELV &amp; controls: fire alarm systems (NFPA 72), ICT, security (CCTV/access control), structured cabling, and BMS/SCADA integration for operational monitoring and control.</li></ul><br> <strong>Qualifications:</strong><ul><li>Bachelor’s degree in electrical engineering; Master's degree preferred.</li><li>Professionally registered (CEng, PE, or equivalent).</li><li>15+ years' experience in electrical building services design, including aviation and complex infrastructure projects.</li><li>Demonstrated experience leading multidisciplinary design teams and delivering major projects.</li></ul><strong>Technical Expertise:</strong><ul><li>Strong knowledge of international electrical design codes, standards, and aviation requirements.</li><li>Expertise in MV/LV power distribution, load assessments, protection systems, and earthing design.</li><li>Proficiency in BIM and industry-standard design software, including Revit, Navisworks, ETAP, and Dialux.</li><li>Experience in airport facilities, terminal buildings, and aviation-related infrastructure is highly desirable</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Careem is building the Everything App for the greater Middle East making it easy to move around, order food and groceries, manage payments, and more. Our purpose is simple: to simplify and improve people s lives and build an awesome organisation that inspires. Since 2012, Careem has enabled earnings for over 2.5 million Captains, simplified the lives of more than 70 million customers, and built a platform where the region s best talent and entrepreneurs thrive. We operate in 70+ cities across 10 countries, from Morocco to Pakistan. We re now entering our next chapter one powered by AI. We re looking for AI talent: curious problem-solvers who know how to apply AI to build tools, automate workflows, and create real impact. Whether it s streamlining operations, enhancing customer experience, or reimagining internal systems we want people who can make Careem work smarter and move faster.</p><p>About the Role Careem's Marketplace ETA &amp; Routing team sits at the heart of how millions of customers experience our platform. We power the estimated delivery times and routing logic across every Careem vertical Food, Groceries, Abu Dhabi Taxi, and Hala from the moment a customer browses a menu to the second their order arrives at the door. As a Senior Software Engineer I on this team, you will build and maintain the highly reliable backend systems that make real-time ETAs and delivery routing possible at scale. You'll work alongside a tight-knit, backend-focused team of engineers across Jordan, Pakistan, and Dubai, and take ownership of critical infrastructure that directly shapes the customer experience across all of Careem's delivery products.</p><p>What You'll Do</p><ul><li>Design, build, and maintain highly scalable and robust backend services powering real-time ETA computation and delivery routing across all Careem verticals.</li><li>Write high-quality, performant, and reliable Golang code while delivering complete features and resolving bugs independently.</li><li>Understand functional specifications end-to-end and translate them into production-grade backend solutions.</li><li>Ensure system reliability through rigorous testing practices unit, integration, and end-to-end with a reliability-first engineering mindset.</li><li>Participate in the on-call rotation and respond to incidents within defined SLAs, helping to maintain platform uptime and stability.</li><li>Contribute to team agile and engineering practices, and play an active role in their continuous improvement.</li><li>Collaborate closely with teammates across multiple time zones, contributing to a culture of technical excellence and strong team cohesion.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>4+ years of professional software development experience.</li><li>Bachelor's Degree in Computer Science or a related technical field.</li><li>Hands-on experience with Golang or at least one modern object-oriented programming language (Java, C#, C++, Kotlin); Golang is the primary language of our stack.</li><li>Strong Computer Science fundamentals: object-oriented design, data structures, and algorithms.</li><li>Proven experience operating and deploying changes to live production systems reliably.</li><li>A collaborative, team-first mindset with strong communication skills.</li><li>Nice to Have Experience with routing systems, ETA computation, or geospatial/logistics domains.</li><li>Familiarity with cloud platforms such as AWS, Google Cloud Platform, or Azure.</li><li>Experience with container technologies including Docker and Kubernetes.</li><li>Working knowledge of relational and non-relational database systems.</li><li>Experience applying software engineering best practices: coding standards, code reviews, source control, build processes, and testing.</li><li>Master's Degree in Computer Science or a related technical field.</li></ul><p></p></section>

<p><h4>Description</h4> <p>Mindrift is looking for highly skilled senior Python data scraping engineers to join the Tendem project and drive specialized data scraping workflows within our hybrid AI + human system.</p> <p>In this role, as an AI pilot – that’s how we refer to this role at Mindrift – you’ll collaborate with Tendem agents that handle repetitive tasks, while you provide critical thinking, domain expertise, and quality control to deliver accurate and actionable results.</p> <p>This part-time remote opportunity is ideal for technical professionals with hands-on experience in web scraping, data extraction, and processing.</p> <h4>What we do</h4> <p>The Mindrift platform connects specialists with AI projects from major tech innovators. Our mission is to unlock the potential of generative AI by tapping into real-world expertise from across the globe.</p> <p>This is a freelance role for a Tendem project. As a senior Python data scraping engineer, you'll handle data scraping tasks requiring technical precision for web extraction and processing, utilizing various tools such as our provided Apify and OpenRouter alongside your own resourceful approaches.</p> <h4>Key responsibilities:</h4> <ul> <li>Own end-to-end data extraction workflows across complex websites, ensuring complete coverage, accuracy, and reliable delivery of structured datasets.</li> <li>Leverage internal tools (Apify, OpenRouter) alongside custom workflows to accelerate data collection, validation, and task execution while meeting defined requirements.</li> <li>Ensure reliable extraction from dynamic and interactive web sources, adapting approaches as needed to handle JavaScript-rendered content and changing site behavior.</li> <li>Enforce data quality standards through validation checks, cross-source consistency controls, adherence to formatting specifications, and systematic verification prior to delivery.</li> <li>Scale scraping operations for large datasets using efficient batching or parallelization, monitor failures, and maintain stability against minor site structure changes.</li> </ul> <h4>Requirements:</h4> <ul> <li>At least 5+ years of relevant experience in data engineering, web scraping, automation, or software development (required).</li> <li>Bachelor’s or master’s degree in engineering, applied mathematics, computer science, or related technical fields is a plus.</li> <li>Candidates should have a strong technical foundation and practical experience with scripting, automation, and AI-assisted workflows. We are looking for specialists who can solve non-trivial problems, work confidently with LLMs, and systematically collect, structure, and validate data from diverse sources. A methodical, detail-oriented approach and the ability to work independently are essential.</li> <li>Strong experience in Python web scraping (BeautifulSoup, Selenium or similar), including dynamic content (JS, AJAX, infinite scroll) and APIs via proxies.</li> <li>Proven ability to extract data from complex structures (hierarchies, archived pages, inconsistent HTML).</li> <li>Solid background in data cleaning, normalization, and validation, delivering structured datasets (CSV, JSON, Google Sheets).</li> <li>Demonstrated experience handling anti-bot mechanisms and dynamic site structures at scale.</li> <li>Experience with cloud infrastructure (AWS or equivalent) and containerization (Docker) as part of real workflows.</li> <li>Hands-on experience with LLM frameworks (LangChain, OpenRouter, or similar) applied to automation tasks.</li> <li>Strong attention to detail and commitment to data accuracy.</li> <li>Self-directed work ethic with ability to troubleshoot independently.</li> <li>English proficiency: upper-intermediate (B2) or above (required).</li> </ul> <h4>Project time expectations</h4> <p>For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements. This is an estimate, not a guaranteed workload, and applies only while the project is active.</p> <h4>Compensation</h4> <p>On this project, contributors can earn up to $25 per hour equivalent, depending on their level and pace of contribution.</p> <p>Compensation varies across projects depending on scope, complexity, and required expertise. Please note that other projects on the platform may offer different earning levels based on their requirements.</p></p><p></p>

<p><h4>Description</h4> <p>Mindrift is looking for highly skilled senior Python data scraping engineers to join the Tendem project and drive specialized data scraping workflows within our hybrid AI + human system.</p> <p>In this role, as an AI pilot – that’s how we refer to this role at Mindrift – you’ll collaborate with Tendem agents that handle repetitive tasks, while you provide critical thinking, domain expertise, and quality control to deliver accurate and actionable results.</p> <p>This part-time remote opportunity is ideal for technical professionals with hands-on experience in web scraping, data extraction, and processing.</p> <h4>What we do</h4> <p>The Mindrift platform connects specialists with AI projects from major tech innovators. Our mission is to unlock the potential of generative AI by tapping into real-world expertise from across the globe.</p> <p>This is a freelance role for a Tendem project. As a senior Python data scraping engineer, you'll handle data scraping tasks requiring technical precision for web extraction and processing, utilizing various tools such as our provided Apify and OpenRouter alongside your own resourceful approaches.</p> <h4>Key responsibilities:</h4> <ul> <li>Own end-to-end data extraction workflows across complex websites, ensuring complete coverage, accuracy, and reliable delivery of structured datasets.</li> <li>Leverage internal tools (Apify, OpenRouter) alongside custom workflows to accelerate data collection, validation, and task execution while meeting defined requirements.</li> <li>Ensure reliable extraction from dynamic and interactive web sources, adapting approaches as needed to handle JavaScript-rendered content and changing site behavior.</li> <li>Enforce data quality standards through validation checks, cross-source consistency controls, adherence to formatting specifications, and systematic verification prior to delivery.</li> <li>Scale scraping operations for large datasets using efficient batching or parallelization, monitor failures, and maintain stability against minor site structure changes.</li> </ul> <h4>Requirements:</h4> <ul> <li>At least 5+ years of relevant experience in data engineering, web scraping, automation, or software development (required).</li> <li>Bachelor’s or master’s degree in engineering, applied mathematics, computer science, or related technical fields is a plus.</li> <li>Candidates should have a strong technical foundation and practical experience with scripting, automation, and AI-assisted workflows. We are looking for specialists who can solve non-trivial problems, work confidently with LLMs, and systematically collect, structure, and validate data from diverse sources. A methodical, detail-oriented approach and the ability to work independently are essential.</li> <li>Strong experience in Python web scraping (BeautifulSoup, Selenium or similar), including dynamic content (JS, AJAX, infinite scroll) and APIs via proxies.</li> <li>Proven ability to extract data from complex structures (hierarchies, archived pages, inconsistent HTML).</li> <li>Solid background in data cleaning, normalization, and validation, delivering structured datasets (CSV, JSON, Google Sheets).</li> <li>Demonstrated experience handling anti-bot mechanisms and dynamic site structures at scale.</li> <li>Experience with cloud infrastructure (AWS or equivalent) and containerization (Docker) as part of real workflows.</li> <li>Hands-on experience with LLM frameworks (LangChain, OpenRouter, or similar) applied to automation tasks.</li> <li>Strong attention to detail and commitment to data accuracy.</li> <li>Self-directed work ethic with ability to troubleshoot independently.</li> <li>A link to GitHub is a plus.</li> <li>English proficiency: Upper-intermediate (B2) or above (required).</li> </ul> <h4>Project time expectations</h4> <p>For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements. This is an estimate, not a guaranteed workload, and applies only while the project is active.</p> <h4>Compensation</h4> <p>On this project, contributors can earn up to $25 per hour equivalent, depending on their level and pace of contribution.</p> <p>Compensation varies across projects depending on scope, complexity, and required expertise. Please note that other projects on the platform may offer different earning levels based on their requirements.</p></p><p></p>

<p><h4>Company description</h4> <p>Join a hotel that is a member of the Accor network, whose group brings together more than 45 brands, 5,500 hotels, 10,000 restaurants and lifestyle destinations. Here, we believe in you and what you bring to the table. There are many opportunities for development and advancement. Every gesture, every smile, every action, contributes to creating a positive and memorable impact for our customers, our colleagues and also for our planet. Together, we embody the vision of responsible hospitality.</p> <p>Take the opportunity to become a Heartist® and let your heart guide you in this world where life beats faster.</p> <h4>Job description</h4> <h4>Job summary:</h4> <p>The Chief Engineer at Movenpick Resort Petra Jordan is responsible for the overall supervision, management, and leadership of the engineering department. This role ensures the smooth operation of all hotel facilities, including mechanical, electrical, plumbing, and HVAC systems. The Chief Engineer plays a crucial role in maintaining the hotel’s safety standards, managing energy efficiency, and providing a high level of service to both internal and external guests.</p> <h4>Key responsibilities:</h4> <p><strong>Leadership and team management:</strong><br> Lead and supervise the engineering team, including recruiting, training, and developing staff to maintain a highly skilled and motivated team.<br> Assign tasks, manage shifts, and oversee daily operations of the engineering department.<br> Provide technical expertise and support for maintenance staff.</p> <p><strong>Maintenance and operations:</strong><br> Oversee all maintenance programs, preventive maintenance, and repairs for all hotel equipment, including HVAC, electrical, plumbing, and fire safety systems.<br> Ensure that all hotel facilities and systems are functioning efficiently and in compliance with safety and regulatory standards.<br> Manage day-to-day operational issues, ensuring quick and efficient problem resolution to minimize downtime and guest inconvenience.</p> <p><strong>Budget and financial management:</strong><br> Prepare and manage the department's budget, including controlling costs related to maintenance, energy consumption, and capital expenditures.<br> Ensure proper inventory control of parts and supplies, as well as efficient energy and water management to optimize operational expenses.<br> Monitor and analyze energy consumption, looking for cost-saving opportunities.</p> <p><strong>Health, safety, and compliance:</strong><br> Ensure all building systems comply with health and safety regulations, including fire safety systems, emergency lighting, and building security.<br> Oversee regular safety inspections and ensure compliance with all local, national, and international standards and regulations.<br> Act as the key contact during emergencies and ensure the safety of guests and employees.</p> <p><strong>Capital projects and renovations:</strong><br> Oversee engineering aspects of capital projects, renovations, and upgrades within the hotel, ensuring work is completed on time and within budget.<br> Collaborate with external contractors and service providers as needed for large-scale projects and technical services.</p> <p><strong>Collaboration with other departments:</strong><br> Work closely with the housekeeping, front office, and food & beverage departments to ensure all guest areas and back-of-house operations are in optimal condition.<br> Assist in setting up rooms, conference facilities, and event spaces when engineering support is needed.<br> Provide timely communication and status updates on engineering tasks to hotel management.</p> <p><strong>Sustainability and environmental initiatives:</strong><br> Develop and implement energy conservation and sustainability initiatives to reduce the hotel's environmental impact.<br> Collaborate with the management team on environmental sustainability efforts, ensuring alignment with the hotel's corporate responsibility policies.</p> <h4>Qualifications</h4> <p><strong>Qualifications:</strong><br> Bachelor's degree in Mechanical, Electrical, Civil Engineering, or a related field.<br> 7+ years of experience in hotel engineering or facilities management, with at least 3 years in a senior engineering leadership role.<br> Strong technical knowledge of building systems, including HVAC, electrical, plumbing, and fire safety.<br> Experience in budgeting, project management, and contractor management.<br> Excellent leadership, communication, and problem-solving skills.<br> Knowledge of sustainability practices and energy management systems is preferred.<br> Familiarity with local regulations, building codes, and safety standards.</p> <p><strong>Competencies:</strong><br> Strong leadership and team management capabilities.<br> Analytical and detail-oriented with excellent organizational skills.<br> Ability to work under pressure and manage multiple priorities.<br> Strong communication and interpersonal skills.<br> Proficiency in relevant software and systems, including BMS (Building Management Systems).</p> <h4>Additional information</h4> <p><strong>Your team and working environment:</strong><br> In 1-2 sentences, introduce the team, property or office environment in a way that reflects the culture.</p> <p><strong>Our commitment to diversity & inclusion:</strong><br> We are an inclusive company and our ambition is to attract, recruit and promote diverse talent.</p></p><p></p>