وظائف فني الكترونيات في الأردن

<p><h4>Essential responsibilities:</h4> <p>The designee shall be qualified to install, sustain, troubleshoot, and repair standard ground radar and airfield systems and equipment platforms to include air traffic control radars and ground aircraft control and warning radar systems; air traffic control radios; meteorological and navigational aid systems.</p> <p>Resolves installation, repair, and modification problems associated with ATCALS and C2 equipment. Employs line-of-sight and tropospheric scatter techniques. Conducts tests to restore and maintain systems. Uses layout drawings, schematics, and pictorial diagrams to solve maintenance problems and ensure equipment is properly positioned. Analyzes construction and operating characteristics of equipment to determine source of malfunction. Performs intricate alignment and calibration procedures to ensure maximum operating efficiency.</p> <p>Reviews and ensures compliance with maintenance management publications and procedures. Enforces safety standards for system maintenance activities. Checks installed and repaired components for compliance with technical publications. Maintains inspection and maintenance records. Posts entries on maintenance and inspection records. Records meter readings and other pertinent data in equipment logs. Completes maintenance data collection forms. Requisitions, accounts for, and turns in supplies and material.</p> <p>The designee shall maintain systems such as DME, ILS, MMLS, MPN-23, UPS, RCSU-2238, TACAN, TRN-44, VOR, RSI/RCI or equivalent monitoring equipment, FMQ-19, FMQ-23, Micro-EARTS, Multi Source Correlator Tracker (MSCT), NRTD, STARS, STRAP, TDX-2000, MARK IVB, NEXION, Terminal Advisory System (TAS), GPN-27 (or 20), MPN-25, TPS-75, UPX-27, UPX-37, UPX-44A, CM-200, CM-300, GRC-171 & 211, GRR-23/24, PCAS, GRT-21/22, ETVS, Liberty Star, PL-2000DT, PRC-117, RT-1319, TRC-214, TRC-176, URC-200, ATIS, DVRS, TTRS, but not be limited to those listed in Table 4.5.2 ATCALS Systems and Associated Support Equipment; Table 4.5.3 ATC Weather Systems and Associated Support Equipment; Table 4.5.5 Regional Maintenance Center O&M and Support Equipment.</p> <h4>Minimum position knowledge, skills, and abilities required:</h4> <p>High school diploma or GED. Relevant associate’s degree preferred. Formal electronics training such as military technical training school, vocational college, and/or a four (4) year electronics apprentice program with experience in electronics equipment the technician will maintain. Maintaining COMSEC/IP networking equipment requires IAT Level II baseline certification in accordance with AFMAN 17-1303.</p> <p>Level I tech – four (4) years of recent, relevant, and practical experience with equipment the technician will maintain and oversee. Shall have four (4) years experience working with/on electronic systems.</p> <p>Ability to obtain and maintain a US CENTCOM medical exam.</p> <p>Must have or be able to obtain/maintain a US Government Secret Security Clearance. <strong>Note:</strong> US citizenship is required to obtain a Secret Clearance.</p></p><p></p>

<p><h4>Job description</h4> <p>Diesel truck technician performs all types of repairs and diagnostics. This includes daily hands-on support and training.</p> <p>3 to 5 years minimum full-time experience. Ford training a plus.</p> <p>Paid online training and classroom, lifting up to 70 lbs, must have own tools.</p> <p>New vehicle inspections including factory warranty repairs and computer diagnostics and programming.</p> <p>Earn top wages, match your vacation, and enjoy the security of a premium benefits package.</p> <p>We offer medical insurance, 401K, paid uniforms.</p> <p>Lots of fleet work. Family owned since 1955.</p></p><p></p>

<p><h4>Job description</h4> <p>Diesel truck technician performs all types of repairs and diagnostics. This includes daily hands-on support and training.</p> <p>3 to 5 years minimum full-time experience. Ford training a plus.</p> <p>Paid online training and classroom, lifting up to 70 lbs, must have own tools.</p> <p>New vehicle inspections including factory warranty repairs and computer diagnostics and programming.</p> <p>Earn top wages, match your vacation, and enjoy the security of a premium benefits package.</p> <p>We offer medical insurance, 401K, paid uniforms.</p> <p>Lots of fleet work. Family owned since 1955.</p></p><p></p>

<p>Essential Responsibilities: The designee shall be qualified to install, sustain, troubleshoot, and repair standard radio frequency wireless, line-of-sight, beyond line-of-sight, wideband, ground-based satellite, and encryption transmission devices. Included are multiple waveform systems operating across the spectrum, keying and signal devices, telemetry, and instrumentation systems. Assembles, connects, secures, and interconnects components such as transmitters, power supplies, and antenna assemblies. Resolves installation, repair, and modification problems associated with communications equipment. Employs orbiting communication satellite, line-of-sight, and tropospheric scatter techniques. Conducts tests to restore and maintain systems. Uses layout drawings, schematics, and pictorial diagrams to solve maintenance problems and ensure equipment is properly positioned. Analyzes construction and operating characteristics of equipment to determine source of malfunction. Performs intricate alignment and calibration procedures to ensure maximum operating efficiency. Reviews and ensures compliance with maintenance management publications and procedures. Enforces safety standards for system maintenance activities. Checks installed and repaired components for compliance with technical publications. Maintains inspection and maintenance records. Posts entries on maintenance and inspection records. Records meter readings and other pertinent data in equipment logs. Completes maintenance data collection forms. Requisitions, accounts for, and turns in supplies and material. The designee shall maintain systems are such as CM-200, CM-300, GRC-171 &amp; 211, GRR-23/24, PCAS, GRT- 21/22, PRC-117F/G, RT-1319, TRC-176, URC-200, EPLRS radio, MIDS LVT 2, MIDS LVT 11,AN/TRC-214, Joint Radio Relay (JR2), Cornet TVCS-L, LHSC, RT9000D, 721S-1, 721S-2, ALE, Have Quick, SINCGARS, KY-100, VSAT VRC-103, TTRS, RT-1747, Sun Air RT-9000, Hawkeye Lite, Ranger 1200, iDirect 850/950 Modem, 2050E Modem, but not be limited to those listed in Table 4.5.1. C2 Systems and Associated Equipment; Table 4.5.4 C2 Air Control Squadron O&amp;M Support.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Position Knowledge, Skills, and Abilities Required: High School diploma or GED. Formal electronics training such as: military technical training school, vocational college, and/or a four (4) year electronics apprentice program with experience in electronics equipment the technician will maintain. Minimum IAT Level II, baseline certification IAW AFMAN 17-1303, IP fundamentals, familiarity with deployable communications systems, RF/SATCOM principles highly desired. Ability to obtain and maintain a US CENTCOM Medical Exam Must have or be able to obtain/maintain a US Government Secret Security Clearance. NOTE: US Citizenship is required to obtain a Secret Clearance.</p>

<p><h4>Essential responsibilities:</h4> <p>The designee shall be qualified to install, sustain, troubleshoot, and repair standard radio frequency wireless, line-of-sight, beyond line-of-sight, wideband, ground-based satellite, and encryption transmission devices. Included are multiple waveform systems operating across the spectrum, keying and signal devices, telemetry, and instrumentation systems. Assembles, connects, secures, and interconnects components such as transmitters, power supplies, and antenna assemblies.</p> <p>Resolves installation, repair, and modification problems associated with communications equipment. Employs orbiting communication satellite, line-of-sight, and tropospheric scatter techniques. Conducts tests to restore and maintain systems. Uses layout drawings, schematics, and pictorial diagrams to solve maintenance problems and ensure equipment is properly positioned. Analyzes construction and operating characteristics of equipment to determine source of malfunction. Performs intricate alignment and calibration procedures to ensure maximum operating efficiency.</p> <p>Reviews and ensures compliance with maintenance management publications and procedures. Enforces safety standards for system maintenance activities. Checks installed and repaired components for compliance with technical publications. Maintains inspection and maintenance records. Posts entries on maintenance and inspection records. Records meter readings and other pertinent data in equipment logs. Completes maintenance data collection forms. Requisitions, accounts for, and turns in supplies and material.</p> <p>The designee shall maintain systems such as CM-200, CM-300, GRC-171 & 211, GRR-23/24, PCAS, GRT-21/22, PRC-117F/G, RT-1319, TRC-176, URC-200, EPLRS radio, MIDS LVT 2, MIDS LVT 11, AN/TRC-214, Joint Radio Relay (JR2), Cornet TVCS-L, LHSC, RT9000D, 721S-1, 721S-2, ALE, Have Quick, SINCGARS, KY-100, VSAT VRC-103, TTRS, RT-1747, Sun Air RT-9000, Hawkeye Lite, Ranger 1200, iDirect 850/950 Modem, 2050E Modem, but not be limited to those listed in Table 4.5.1 C2 Systems and Associated Equipment; Table 4.5.4 C2 Air Control Squadron O&M Support.</p> <h4>Minimum position knowledge, skills, and abilities required:</h4> <p>High school diploma or GED. Formal electronics training such as military technical training school, vocational college, or a four-year electronics apprentice program with experience in electronics equipment the technician will maintain.</p> <p>Minimum IAT Level II, baseline certification in accordance with AFMAN 17-1303, IP fundamentals, familiarity with deployable communications systems, RF/SATCOM principles highly desired.</p> <p>Ability to obtain and maintain a US CENTCOM medical exam.</p> <p>Must have or be able to obtain and maintain a US Government Secret Security Clearance. Note: US citizenship is required to obtain a Secret Clearance.</p></p><p></p>

<p>The designee shall be qualified to install, sustain, troubleshoot, and repair standard radio frequency wireless, line-of-sight, beyond line-of-sight, wideband, ground-based satellite, and encryption transmission devices. Included are multiple waveform systems operating across the spectrum, keying and signal devices, telemetry, and instrumentation systems. Assembles, connects, secures, and interconnects components such as transmitters, power supplies, and antenna assemblies. Resolves installation, repair, and modification problems associated with communications equipment. Employs orbiting communication satellite, line-of-sight, and tropospheric scatter techniques. Conducts tests to restore and maintain systems. Uses layout drawings, schematics, and pictorial diagrams to solve maintenance problems and ensure equipment is properly positioned. Analyzes construction and operating characteristics of equipment to determine source of malfunction. Performs intricate alignment and calibration procedures to ensure maximum operating efficiency. Reviews and ensures compliance with maintenance management publications and procedures. Enforces safety standards for system maintenance activities. Checks installed and repaired components for compliance with technical publications. Maintains inspection and maintenance records. Posts entries on maintenance and inspection records. Records meter readings and other pertinent data in equipment logs. Completes maintenance data collection forms. Requisitions, accounts for, and turns in supplies and material. The designee shall maintain systems are such as CM-200, CM-300, GRC-171 &amp; 211, GRR-23/24, PCAS, GRT- 21/22, PRC-117F/G, RT-1319, TRC-176, URC-200, EPLRS radio, MIDS LVT 2, MIDS LVT 11,AN/TRC-214, Joint Radio Relay (JR2), Cornet TVCS-L, LHSC, RT9000D, 721S-1, 721S-2, ALE, Have Quick, SINCGARS, KY-100, VSAT VRC-103, TTRS, RT-1747, Sun Air RT-9000, Hawkeye Lite, Ranger 1200, iDirect 850/950 Modem, 2050E Modem, but not be limited to those listed in Table 4.5.1. C2 Systems and Associated Equipment; Table 4.5.4 C2 Air Control Squadron O&amp;M Support.</p><p><strong>Desired Candidate Profile</strong></p><p>High School diploma or GED. Formal electronics training such as: military technical training school, vocational college, and/or a four (4) year electronics apprentice program with experience in electronics equipment the technician will maintain. • Minimum IAT Level II, baseline certification IAW AFMAN 17-1303, IP fundamentals, familiarity with deployable communications systems, RF/SATCOM principles highly desired. • Ability to obtain and maintain a US CENTCOM Medical Exam • Must have or be able to obtain/maintain a US Government Secret Security Clearance. NOTE: US Citizenship is required to obtain a Secret Clearance.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Quality Technician&nbsp;</p><br><br><p>Manufacturing Quality Technician&nbsp;</p><br><br><br><p>Purpose:</p><br><br><p>Ensure&nbsp;timely&nbsp;support to&nbsp;manufacturing&nbsp;team during production.&nbsp;&nbsp;</p><br><br><p>Ensure standards are respected&nbsp;along manufacturing&nbsp;process.&nbsp;&nbsp;</p><br><br><p>Ensure that intermediate and finished product non-conformities are managed and related corrective &amp; preventive actions held.&nbsp;</p><br><br><br><p>Consistently apply OPEN+ systems and tools.&nbsp;&nbsp;</p><br><br><p>Ensure compliance&nbsp;to&nbsp;all PMI and legal standards, policies and guidelines related to Environment, Health, Safety, Sustainability to prevent personnel,&nbsp;asset&nbsp;or societal loss.&nbsp;&nbsp;</p><br><br><p>Act and promote an interdependent and transparent safety culture fostering the&nbsp;utilization&nbsp;of preventive/predictive approach in line with Open+/IOS&nbsp;</p><br><br><br><p>PRODUCTION SUPPORT&nbsp;</p><br><br><p>Support production teams by providing Quality guidance and support in case of issues. Share knowledge and&nbsp;expertise&nbsp; to&nbsp;stakeholders (Q Champions) on new processes, requirements,&nbsp;methods&nbsp;or guidelines.&nbsp;</p><br><br><p>Train the floor on Quality practices and&nbsp;procedures, and&nbsp;ensure the operational staff&nbsp;remains&nbsp;up to date with our Quality requirements. Provide first level support for DIM troubleshooting and relevant trials.&nbsp;&nbsp;</p><br><br><p>Support brand change activities related to Gate 4 and VSU projects.&nbsp;&nbsp;</p><br><br><p>for RRP products: Coordinate the availability and testing of samples according to the sampling plan and the control strategy.&nbsp;</p><br><br><br><br><br><p>NC MANAGEMENT&nbsp;&nbsp;</p><br><br><p>Support investigation&nbsp;in a timely manner&nbsp;of non-conformities and deviation,&nbsp;leveraging&nbsp;on OPEN+ problem solving tools. Support investigation and resolution&nbsp;of&nbsp; critical&nbsp;deviations, contribute to&nbsp;define&nbsp;disposal actions and when&nbsp;appropriate corrective&nbsp;actions.&nbsp;</p><br><br><p>Based on recommendation from stakeholders,&nbsp;participate&nbsp;to&nbsp;the decision of releasing or destroying the non-conforming products blocked due to quality issues and&nbsp;monitor&nbsp;the related costs. Support BUBD activities for Semis and Finished Goods.&nbsp;</p><br><br><br><p>DOCUMENTATION MANAGEMENT &amp; QMS SUPPORT&nbsp;</p><br><br><p>Provide support to the production team whenever needed&nbsp;</p><br><br><p>Participate to the creation and review of procedures, work&nbsp;instructions&nbsp;and other Quality Documents. Provide support and training according to the training management system.&nbsp;&nbsp;</p><br><br><p>for RRP products: Ensure availability of Batch Record before the production in&nbsp;a timely&nbsp;manner.&nbsp;</p><br><br><br><p>CONTINUOUS IMPROVEMENT&nbsp;</p><br><br><p>Propose and follow-up quality improvement ideas in production or other processes in Operations.&nbsp;&nbsp;</p><br><br><p>Analyze the information and&nbsp;participate&nbsp;in small projects with&nbsp;influence&nbsp;on product quality.&nbsp;</p><br><br><br><p>MATERIALS MANAGEMENT&nbsp;&nbsp;</p><br><br><p>Ensure support to manufacturing&nbsp;in order to&nbsp;improve DIMs performance and its impact on product quality, machines efficiency and production costs.&nbsp;</p><br><br><br><p>NON-CONFORMITIES MANAGEMENT &amp; CAPA&nbsp;</p><br><br><p>Support investigation&nbsp;in a timely manner&nbsp;of non-conformities and deviation,&nbsp;leveraging&nbsp;on OPEN+ problem solving tools.&nbsp;&nbsp;Support&nbsp; the&nbsp;decision making&nbsp;process to quarantine the non-conforming material/products and liaise with interested parties to reveal the root cause and take relevant preventive/corrective actions. Ensure proper follow up and reporting of open actions and&nbsp;maintain&nbsp;the related database up to date. Ensure the proper flow is in place to manage and keep under control the costs related to goods destroyed (LOGD)&nbsp;</p><br><br><br><p>Communicate all useful information for the flow of Quality processes to colleagues and to support teams&nbsp;in order to&nbsp;meet productivity and quality. Support the development of the Q Champions and Equipment Owners through Quality&nbsp;trainings. Support Q Pillar&nbsp;deployment&nbsp; (e.g.Training, HC, QBOS).&nbsp;&nbsp;</p><br><br><br><p>For&nbsp;RRP :&nbsp;perform critical review of executed production batch records and manage intermediate and finished product&nbsp;non conformities&nbsp;and related corrective and preventive actions held with relevant stakeholders and&nbsp;ultimately confirm&nbsp;to the final approver that the product can be released for commercial manufacturing.&nbsp;</p><br><br><p>For RRP: Perform&nbsp;timely&nbsp;calibration and maintenance of&nbsp;at line&nbsp;Quality instruments and ensure proper functionality.&nbsp;</p><br><br><br> </div>

<p>EPP III, Generator (3 - 150KW) and HVAC Technician Jordan Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kW EPP III generators.</p><p>MEANINGFUL WORK AND PERSONAL IMPACT</p><p>As a Generator and HVAC Mechanic, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel.</p><p>Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles. Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS). Operate a Load bank during testing Fabricate wire harnesses and solder terminals. Some work will be in a generator shop environment, and some work will be in a field environment. Other duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High School diploma</li><li>Extensive diesel generator experience.</li><li>Knowledge of generator parallel systems and switch gear.</li><li>Experience with brazing copper tubing and evacuating and recharging refrigerant.</li><li>Obtain and maintain a Secret Clearance</li><li>US passport must not expire for at least 2 years, valid US driver’s license, and an international driver’s permit (AAA)</li></ul>

<p>EPP III, Generator (3 - 150KW) and HVAC Technician Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kW EPP III generators.</p><p>MEANINGFUL WORK AND PERSONAL IMPACT As a Generator and HVAC Mechanic, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel.</p><p>Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles. Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS). Operate a Load bank during testing Fabricate wire harnesses and solder terminals. Some work will be in a generator shop environment, and some work will be in a field environment. Other duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High School diploma</li><li>BA/BS plus 2 years experience, AA/AS/plus 4 years experience, or a High School diploma and 7 years experience</li><li>Extensive diesel generator experience.</li><li>Knowledge of generator parallel systems and switch gear.</li><li>Experience with brazing copper tubing and evacuating and recharging refrigerant.</li><li>Secret Clearance</li><li>US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA)</li><li>Must meet CRC fitness standards for deployment to SWA (southwest Asia) and maintain those standards annually while on contract in SWA.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Confidential - A leading company in Jordan (Retail / Electronics) Jordan Retail/Electronics, Our client, A leading company in Jordan (Retail / Electronics), is looking for Procurement Senior Officer (Supervisor) to manage local and international purchasing activities, supplier coordination, purchase orders, pricing, product availability, and procurement documentation, ensuring timely supply of products and services at the best cost, quality, and commercial terms. Interested candidates who meet the criteria can apply by forwarding their CVs directly to the below email address and put in the subject (Procurement Senior Officer (Supervisor) - Retail /Electronics- Jordan )</p><p>Key Responsibilities</p><ul><li>Handle procurement requests and issue purchase orders.</li><li>Source, evaluate, and negotiate with suppliers.</li><li>Follow up on shipments, delivery timelines, and stock availability.</li><li>Coordinate with sales, warehouse, finance, logistics, and operations teams.</li><li>Maintain supplier records, contracts, quotations, and procurement files.</li><li>Compare prices, terms, warranties, payment terms, and delivery conditions.</li><li>Support procurement planning based on stock levels and sales forecasts.</li><li>Follow up on invoices, payments, claims, returns, and supplier disputes.</li><li>Prepare procurement reports, cost analysis, and supplier performance updates.</li><li>Ensure compliance with company procurement policies and approval procedures.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in Business Administration, Supply Chain, Logistics, Accounting, or related field.</li><li>4 7 years of procurement experience, preferably in retail, electronics, appliances, IT, or FMCG.</li><li>Strong supplier negotiation and follow-up skills.</li><li>Good knowledge of purchase orders, quotations, contracts, and logistics documentation.</li><li>Strong Excel and ERP/system experience.</li><li>Good English communication skills.</li><li>Organized, detail-oriented, and able to work under pressure.</li></ul><p>Preferred</p><ul><li>Experience in consumer electronics or retail procurement.</li><li>Vendor management with international brands.</li><li>Knowledge of import procedures, warranties, and after-sales coordination</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Al-Kasih Group for Food Industries announces its desire to attract a distinguished technical professional to be part of its engineering and maintenance team, for the position of "Mechanical Technician". We are looking for an individual who possesses passion and practical experience while adhering to the highest standards of occupational safety to ensure the continuous operation of machinery and equipment with high efficiency, and to reduce production downtime.</p><p><br></p><p><b>General Objective of the Position:</b></p><p> To ensure the continuous operation of machinery and equipment with high operational efficiency, and to reduce unexpected downtime through the implementation of preventive and corrective maintenance programs in the food industries sector.</p><p><br></p><p><b>Responsibilities and Job Tasks:</b></p><p> • Preventive Maintenance: Implementing scheduled routine inspections for machinery, diagnosing moving parts, and changing oils and filters regularly for production lines.</p><p> • Corrective Maintenance: Diagnosing unexpected mechanical failures, dismantling defective equipment, and repairing or replacing defective parts efficiently and in the least possible time.</p><p> • Reading Schematics: Understanding and analyzing technical catalogs, engineering drawings, and mechanical schematics to determine parts and maintenance pathways accurately.</p><p> • Hydraulic and Pneumatic Systems: Maintenance and repair of pumps, valves, cylinders, and air or oil systems in production lines.</p><p> • Spare Parts Management: Identifying requirements accurately for spare parts and technical tools, and notifying the supervisor to secure them from warehouses.</p><p> • Technical Documentation: Writing daily maintenance reports, recording recurring failures, and documenting working hours performed accurately.</p><p> • Occupational Safety: Strict adherence to health and safety standards (OSHA), and wearing personal protective equipment (PPE) during work.</p><ul><li>Thorough knowledge of types of pumps and their components and handling.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p> • <b>Educational Qualification:</b> Diploma in Engineering or a technical institute certificate in (Mechanical Engineering, Equipment Maintenance, or equivalent).</p><p> <b> • Work Experience:</b> Minimum of 5 years of practical experience in an industrial facility or factories (experience in the food industry is preferred).</p><p><b> • Technical Skills:</b> Comprehensive knowledge of using precision measuring tools, hand tools, and specialized electrical maintenance tools.</p><p><b> • Personal Attributes:</b> Strong analytical skills and troubleshooting abilities under pressure, physical fitness, and the ability to work in industrial environments, along with good communication skills for collaboration with the electrical maintenance team.</p></div>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements. USAF equivalent position is Munitions/Weapons Technician Apprentice. Essential Responsibilities: Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components. Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction. Assist in management of all inspection, maintenance, and storage of munitions and support equipment. Support quality assurance, compliance, continuity, and standardization of munitions programs. Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems. Maintain weapons certification and currency. Assist with availability and serviceability of munitions to support and meet customer requirements. Perform all other duties as assigned or requested.</p><p><strong>Desired Candidate Profile</strong></p><p>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum. Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required. Completed USAF Munitions/Weapons Tech School or DoD equivalent. Must possess basic knowledge of technical publications related to aircraft maintenance. Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo Must be able to inspect and operate ground support and auxiliary equipment. Must achieve a passing grade in all required courses/certifications for continued employment, as needed. Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment. Must be able to Deploy to Forward Locations (other countries) as Directed by the Government. Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. Must be able to speak, read, write, and understand English. Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance. Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment. Must submit updated SF-86 within 30 days of hire start date. Must have current/active State Issued Driver s License. Must be able to acquire and maintain a valid flight-line Government Driver s License. Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages. Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances. Preferred Qualifications: Associate degree in a relevant career field. RPA Deployment Experience. Prior Experience as a Defense Contractor. Munitions/Weapons experience within the last 10 years .</p>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements. USAF equivalent position is Munitions/Weapons Technician Apprentice. Essential Responsibilities: Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components. Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction. Assist in management of all inspection, maintenance, and storage of munitions and support equipment. Support quality assurance, compliance, continuity, and standardization of munitions programs. Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems. Maintain weapons certification and currency. Assist with availability and serviceability of munitions to support and meet customer requirements. Perform all other duties as assigned or requested.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required.</li><li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li><li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li><li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair, and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance.</p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification, and related activities. Provide technical inputs to managers in matters of weapons management, inventory, maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.</p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Perform basic work in the installation, configuration changes, modification, repair, and adjustment of aircraft armament systems and components.</li> <li>Perform basic maintenance modification, destruction, and demilitarization on ammunition and explosive components.</li> <li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li> <li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li> <li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li> <li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li> <li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li> <li>Maintain weapons certification and currency.</li> <li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li> <li>Perform all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft munitions/weapons maintenance experience required.</li> <li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li> <li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry, and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Munitions/weapons experience within the last 10 years.</li> </ul></p><p></p>

<p><strong>Job Title: &nbsp;</strong>WAM Liaison Officer&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;</p> <p><strong>Department: </strong>WAM/ Operations&nbsp;&nbsp;</p> <p><strong>Position Grade:</strong> D</p> <p><strong>Reports to: </strong>TFM Training Lead/WAM Operations Manager&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</p> <p ><strong>No. of subordinates: &nbsp;&nbsp;</strong>Direct:&nbsp; 0&nbsp;&nbsp; &nbsp;&nbsp;Indirect: 0</p> <p ><strong>Working time %: </strong>100%</p> <p><strong>Location: </strong>MAG Jordan – Amman, Zarqa, with travel to project operational areas outside of these location.</p> <p><strong>_________________________________________________________________________________</strong></p> <p>&nbsp;</p> <p>&nbsp;</p> <p><strong>MAG’s Vision is a safe future for women, men and children affected by violence, conflict and insecurity. </strong>People will live in communities where their rights are upheld, with dignity and choice and free from fear from mines, explosive remnants of war (ERW) and the impact of small arms and light weapons and ammunition.</p> <p>&nbsp;</p> <p><strong>MAG’s Mission is to save lives and build safer futures.</strong>&nbsp;We will use our core skills and distinctive competence to save lives through the removal of mines and ERW, and reduce the impact of small arms, light weapons and ammunition on people and communities. How we do this is as important as what we do – we work primarily with and for communities, for us ‘it’s all about people’.</p> <p>&nbsp;</p> <p><strong>MAG’s Values</strong><strong>. </strong>Our values come to life through our actions, every day. How we act has an impact on others. As someone who works at MAG, you can help to create a positive culture by demonstrating our values through your own behaviour and actions. Everyone has a role to play in shaping our culture. Everyone should understand our values and is encouraged to think how they are relevant to their individual role.</p> <p>&nbsp;</p> <p><strong>DETERMINED</strong><strong> - We work with purpose. </strong></p> <p>&nbsp;</p> <p><strong>EXPERT </strong><strong>- Through excellence and expertise we build trust.</strong></p> <p>&nbsp;</p> <p><strong>INTEGRITY</strong><strong> - We strive to do the right thing.</strong></p> <p>&nbsp;</p> <p><strong>COMPASSION</strong><strong> - People come first in everything we do. </strong></p> <p>&nbsp;</p> <p><strong>INCLUSIVE</strong><strong> - We are inclusive, and we value diversity. </strong></p> <p><strong>_________________________________________________________________________________</strong></p> <p>&nbsp;</p> <p><strong><u>Job Purpose</u></strong></p> <p>&nbsp;</p> <p>The Liaison Officer will provide dedicated coordination and administrative support to facilitate the effective delivery of the International Ammunition Technician Course conducted in Jordan for Jordanian Armed Forces (JAF) personnel. The role is specifically designed to assist the newly deployed Training Lead (TL) in managing daily and weekly operational, logistical, translation, and coordination requirements associated with the course, ensuring smooth communication between stakeholders and uninterrupted execution of training activities.</p> <p>The Liaison Officer will support translation of technical training delivering as required, other duties will be to ensure that all enabling functions, such as coordination with military counterparts, scheduling, documentation, and logistical follow‑up, are managed efficiently and in accordance with organisational procedures and national protocols.</p> <p>&nbsp;</p> <p><strong>_________________________________________________________________________________</strong></p> <p>&nbsp;</p> <p>&nbsp;</p> <p>&nbsp;</p> <p><strong><u>Principal Responsibilities </u></strong></p> <p>&nbsp;</p> <p><strong><u>Liaison, Coordination and Representation</u></strong></p> <p>&nbsp;</p> <ol> <li>Act as the day‑to‑day liaison between the project team, the Technical Field Managers (TFMs) Training Lead, and designated Jordanian Armed Forces (JAF) focal points.</li> <li>Facilitate official communication and coordination with JAF and administrative offices to support course implementation.</li> <li>Translate training delivery where needed.</li> <li>Coordinate access permissions, entry procedures, and movement within military installations in line with national military regulations.</li> <li>Support the TFMs in arranging meetings, briefings, and coordination sessions with JAF counterparts and other relevant stakeholders.</li> <li>Represent the organisation in routine coordination meetings when required and relay outcomes to the TFMs and project management.</li> <li>Ensure cultural and institutional sensitivities are respected in all interactions with national counterparts.</li> <li>Understand all stakeholder organisational structures and operate within their boundaries.</li> <li>Ensure relevant and transparent communications on all program issues.</li> <li>Ensure the integrity of MAG’s organisational profile in all external communications (written and verbal).</li> </ol> <p>&nbsp;</p> <p><strong><u>Project Planning and Monitoring</u></strong></p> <p>&nbsp;</p> <ol> <li>Responsible for Procurement and logistics planning, coordination, follow up on deliveries with procurement and logistics department.&nbsp;</li> <li>Assist the TFMs in preparing and maintaining detailed weekly and daily activity plans for the duration of the course.</li> <li>Track implementation of planned activities, including classroom sessions, practical exercises, site visits, and administrative milestones.</li> <li>Maintain an updated course schedule and ensure timely dissemination of changes to all concerned parties.</li> <li>Monitor the availability and readiness of training venues, equipment, and supporting services, and follow up with responsible entities to resolve issues.</li> <li>Support the organization of opening and closing ceremonies, official visits, and evaluation events as required.</li> <li>Highlight and address the TFMs problems that partner organisations encounter during partner collaboration and cooperation.</li> </ol> <p>&nbsp;</p> <p><strong><u>Information Management</u></strong></p> <p >&nbsp;</p> <ol> <li>Ensure collection of the required data.</li> <li>Provide data to the Information Management Unit in the appropriate formats.</li> <li>Undertake data entry, analysis, and reporting as required.</li> <li>Maintain organised records of participant lists, attendance sheets, contact details, and official correspondence related to the course.</li> <li>Manage the flow of information between the TFMs, project team, and JAF counterparts to ensure all stakeholders have accurate and up‑to‑date information.</li> <li>Ensure that all documentation is stored, archived, and shared in accordance with organisational information management procedures.</li> <li>Support the preparation and translation (if required) of administrative documents, schedules, and routine correspondence between English and Arabic.</li> </ol> <p>&nbsp;</p> <p>&nbsp;</p> <p><strong><u>Reporting</u></strong></p> <p>&nbsp;</p> <ol> <li>Submit weekly activity plans and reports to the TFM-TL and other persons as required.</li> <li>Maintain clear and efficient communication with the TFMs and other team members as necessary, ensuring effective reporting when needed.</li> <li>Provide the TFMs with regular updates on coordination status, emerging issues, and required follow‑up actions.</li> <li>Draft short weekly coordination summaries highlighting key activities, challenges, and mitigation measures.</li> <li>Maintain logs of meetings, decisions, and action points, ensuring they are tracked to completion.</li> <li>Support the compilation of end‑of‑course administrative reports and lessons learned related to coordination and logistics.</li> </ol> <div> <p>&nbsp;</p>

<p><h4>Company description</h4> <p>Why work for Accor?<br> We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.<br> By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality.<br> Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS</p> <h4>Job description</h4> <p>You perform highly diversified duties to install, troubleshoot, repair and maintain the property’s facilities and equipment to ensure a safe and functional environment for the guests.</p> <h4>What is in it for you:</h4> <ul> <li>Employee benefit card offering discounted rates in Accor worldwide</li> <li>Learning programs through our Academies</li> <li>Opportunity to develop your talent and grow within your property and across the world</li> <li>Ability to make a difference through our Corporate Social Responsibility activities, like Planet 21</li> </ul> <h4>What you will be doing:</h4> <ul> <li>Takes prompt action relating to all maintenance orders concerning all plumbing services in the guest rooms, kitchen, health club, toilets, plant-rooms, swimming pool, all staff and guest locker rooms and all related areas</li> <li>Performs preventive maintenance works on all plumbing lines and sanitary fixtures as per the annual maintenance chart</li> <li>Notes all required spare parts and consumable material and instructs the storekeeper of the requirements</li> <li>With the help of the checklist, inspects the hotel on daily basis for any defects on the plumbing services and sanitary fixtures and takes prompt action to rectify the defects</li> <li>Takes the responsibilities of the pool attendant</li> <li>Takes regular readings on water and gas consumption and records it on the energy consumption record charts</li> </ul> <h4>Your experience and skills include:</h4> <ul> <li>Relevant building maintenance experience is an asset</li> <li>Strong interpersonal and problem solving abilities</li> <li>Highly responsible and reliable</li> </ul> <h4>Your team and working environment:</h4> <ul> <li>Member of the fire team</li> <li>Assists the general mechanic, boiler-man and refrigeration technician whenever required</li> <li>To report for duty punctually wearing the correct uniform and name badge at all times</li> <li>To provide courteous and professional service at all times</li> </ul> <h4>Our commitment to diversity & inclusion:</h4> <p>We are an inclusive company and our ambition is to attract, recruit and promote diverse talent.</p> <p>Why work for Accor?<br> We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.<br> By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality.<br> Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS</p></p><p></p>

<p><h4>Company description</h4> <p>Why work for Accor?<br> We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.<br> By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality.<br> Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS</p> <h4>Job description</h4> <p>You perform highly diversified duties to install, troubleshoot, repair and maintain the property’s facilities and equipment to ensure a safe and functional environment for the guests.</p> <h4>What is in it for you:</h4> <ul> <li>Employee benefit card offering discounted rates in Accor worldwide</li> <li>Learning programs through our Academies</li> <li>Opportunity to develop your talent and grow within your property and across the world</li> <li>Ability to make a difference through our Corporate Social Responsibility activities, like Planet 21</li> </ul> <h4>What you will be doing:</h4> <ul> <li>Takes prompt action relating to all maintenance orders concerning all plumbing services in the guest rooms, kitchen, health club, toilets, plant-rooms, swimming pool, all staff and guest locker rooms and all related areas</li> <li>Performs preventive maintenance works on all plumbing lines and sanitary fixtures as per the annual maintenance chart</li> <li>Notes all required spare parts and consumable material and instructs the storekeeper of the requirements</li> <li>With the help of the checklist, inspects the hotel on daily basis for any defects on the plumbing services and sanitary fixtures and takes prompt action to rectify the defects</li> <li>Takes the responsibilities of the pool attendant</li> <li>Takes regular readings on water and gas consumption and records it on the energy consumption record charts</li> </ul> <h4>Your experience and skills include:</h4> <ul> <li>Relevant building maintenance experience is an asset</li> <li>Strong interpersonal and problem solving abilities</li> <li>Highly responsible and reliable</li> </ul> <h4>Your team and working environment:</h4> <ul> <li>Member of the fire team</li> <li>Assists the general mechanic, boiler-man and refrigeration technician whenever required</li> <li>To report for duty punctually wearing the correct uniform and name badge at all times</li> <li>To provide courteous and professional service at all times</li> </ul> <h4>Our commitment to diversity & inclusion:</h4> <p>We are an inclusive company and our ambition is to attract, recruit and promote diverse talent.</p> <p>Why work for Accor?<br> We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.<br> By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality.<br> Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Summary We're looking for a creative, detail-oriented Designer to join a well-known electric company. The successful candidate will develop high-quality visual content that supports the company's branding, marketing campaigns, product launches, and retail activities. The ideal candidate has a strong eye for design, excellent technical skills, and the ability to deliver creative solutions across digital and print platforms. Key Responsibilities Design creative marketing materials for digital, print, retail, and outdoor advertising campaigns. Develop visual assets for ATL, BTL, social media, website, email marketing, and e-commerce platforms. Create product packaging artwork, labels, manuals, and promotional materials while ensuring brand consistency. Design Point of Sale Materials (POSM), in-store displays, exhibition booths, and retail branding elements. Collaborate with the marketing team to translate campaign concepts into compelling visual designs. Prepare artwork files for print production and coordinate with external printing and production suppliers. Maintain and update brand guidelines to ensure consistent visual identity across all communication channels. Edit and retouch product images for catalogs, websites, social media, and advertising campaigns. Develop presentations, infographics, and visual reports for internal and external stakeholders. Stay up to date with design trends, consumer electronics market trends, and emerging creative technologies. Manage multiple design projects simultaneously while meeting deadlines and quality standards. Ensure all creative materials comply with company branding standards and technical specifications</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's or a diploma degree in Graphic Design, Visual Communication, Fine Arts, Multimedia Design, or a related field. 2 5 years of professional experience in graphic design, preferably within the consumer electronics, retail, or FMCG industry. Proficiency in Adobe Creative Suite (Photoshop, Illustrator, InDesign) and other relevant design tools. Experience in packaging design, print production, and digital content creation. Strong understanding of branding, typography, color theory, and layout principles. Knowledge of motion graphics, video editing, or UI/UX design is an advantage. Excellent communication and collaboration skills. Ability to manage multiple projects and meet tight deadlines in a fast-paced environment. Preferred Skills Experience designing for retail environments and e-commerce platforms. Knowledge of pre-press production and printing processes. Familiarity with photography, image retouching, and product visualization. Creative thinking with strong attention to detail and problem-solving skills.</p><p></p></section>