وظائف لخريجي كلية الهندسة في الأردن

<p><h4>Essential responsibilities:</h4> <p>The designee shall be qualified to install, sustain, troubleshoot, and repair standard radio frequency wireless, line-of-sight, beyond line-of-sight, wideband, ground-based satellite, and encryption transmission devices. Included are multiple waveform systems operating across the spectrum, keying and signal devices, telemetry, and instrumentation systems. Assembles, connects, secures, and interconnects components such as transmitters, power supplies, and antenna assemblies.</p> <p>Resolves installation, repair, and modification problems associated with communications equipment. Employs orbiting communication satellite, line-of-sight, and tropospheric scatter techniques. Conducts tests to restore and maintain systems. Uses layout drawings, schematics, and pictorial diagrams to solve maintenance problems and ensure equipment is properly positioned. Analyzes construction and operating characteristics of equipment to determine source of malfunction. Performs intricate alignment and calibration procedures to ensure maximum operating efficiency.</p> <p>Reviews and ensures compliance with maintenance management publications and procedures. Enforces safety standards for system maintenance activities. Checks installed and repaired components for compliance with technical publications. Maintains inspection and maintenance records. Posts entries on maintenance and inspection records. Records meter readings and other pertinent data in equipment logs. Completes maintenance data collection forms. Requisitions, accounts for, and turns in supplies and material.</p> <p>The designee shall maintain systems such as CM-200, CM-300, GRC-171 & 211, GRR-23/24, PCAS, GRT-21/22, PRC-117F/G, RT-1319, TRC-176, URC-200, EPLRS radio, MIDS LVT 2, MIDS LVT 11, AN/TRC-214, Joint Radio Relay (JR2), Cornet TVCS-L, LHSC, RT9000D, 721S-1, 721S-2, ALE, Have Quick, SINCGARS, KY-100, VSAT VRC-103, TTRS, RT-1747, Sun Air RT-9000, Hawkeye Lite, Ranger 1200, iDirect 850/950 Modem, 2050E Modem, but not be limited to those listed in Table 4.5.1. C2 Systems and Associated Equipment; Table 4.5.4 C2 Air Control Squadron O&M Support.</p> <h4>Minimum position knowledge, skills, and abilities required:</h4> <p>High school diploma or GED. Formal electronics training such as military technical training school, vocational college, and/or a four (4) year electronics apprentice program with experience in electronics equipment the technician will maintain.</p> <p>Minimum IAT Level II, baseline certification IAW AFMAN 17-1303, IP fundamentals, familiarity with deployable communications systems, RF/SATCOM principles highly desired.</p> <p>Ability to obtain and maintain a US CENTCOM Medical Exam.</p> <p>Must have or be able to obtain/maintain a US Government Secret Security Clearance. Note: US citizenship is required to obtain a Secret Clearance.</p> <h4>Compensation details:</h4> <p>$100,000.00</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Original posting:</h4> <p>05/13/2026 - Until filled</p> <p>Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under federal laws and supplemental language at labor laws posters.</p></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Supports an aircraft ground equipment (AGE) shop in a medium to large-sized military aircraft flying organization. Ensures the timely and proper performance of scheduled and unscheduled maintenance on AGE equipment and light support vehicles. Inspects, tests, and operates AGE to determine equipment serviceability and proper operation. Diagnoses mechanical and electrical circuitry malfunctions. Interprets drawings, wiring diagrams, schematics, and technical data to facilitate repairs and/or modifications to ground support equipment.</p> <p>Identifies appropriate replacement parts in TOs and technical documents and orders those parts. Removes, disassembles, repairs, cleans, treats for corrosion, assembles, and re-installs AGE accessories and components. Stencils and marks AGE as appropriate. Services equipment with fuel, oil, coolant, water, hydraulic fluid, and air as required. Operates, cleans, inspects, and services AGE tow vehicles. Maintains and documents AGE equipment and tow vehicle forms. Positions equipment to support aircraft maintenance and flying operations. Schedules PMIs as required. Adheres to safety procedures and follows technical orders as applicable.</p> <p>USAF equivalent position is AGE Mechanic Apprentice.</p> <h4>Essential responsibilities</h4> <p>Maintains external fuel and grounding systems; performs scheduled and unscheduled maintenance on GSE; inspects, tests, and operates GSE to determine equipment serviceability and proper operation; services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air; diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications.</p> <p>Disassembles and assembles malfunctioning basic GSE accessories and components; removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories; stencils and marks GSE in accordance with technical publications; stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations.</p> <p>Prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles.</p> <p>Assists in maintaining vehicle records and assists with updating paper and electronic equipment records; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations; practices good housekeeping, tool control, foreign object damage prevention, and safety at all times.</p> <p>Performs all other duties as assigned or requested.</p> <h4>Minimum requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one-year actual AGE maintenance experience required.</li> <li>Must be qualified with most basic types and uses of AGE equipment.</li> <li>Must be familiar with diesel engine maintenance and repair, and HVAC maintenance and repair at the basic level.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Vehicle operator training.</li> <li>AGE mechanic experience within the last 10 years.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Supports an aircraft ground equipment (AGE) shop in a medium to large-sized military aircraft flying organization. Ensures the timely and proper performance of scheduled and unscheduled maintenance on AGE equipment and light support vehicles. Inspects, tests, and operates AGE to determine equipment serviceability and proper operation. Diagnoses mechanical and electrical circuitry malfunctions. Interprets drawings, wiring diagrams, schematics, and technical data to facilitate repairs and/or modifications to ground support equipment.</p> <p>Identifies appropriate replacement parts in TOs and technical documents and orders those parts. Removes, disassembles, repairs, cleans, treats for corrosion, assembles, and re-installs AGE accessories and components. Stencils and marks AGE as appropriate. Services equipment with fuel, oil, coolant, water, hydraulic fluid, and air as required. Operates, cleans, inspects, and services AGE tow vehicles. Maintains and documents AGE equipment and tow vehicle forms. Positions equipment to support aircraft maintenance and flying operations. Schedules PMIs as required. Adheres to safety procedures and follows technical orders as applicable.</p> <p>USAF equivalent position is AGE Mechanic Apprentice.</p> <h4>Essential responsibilities</h4> <p>Maintains external fuel and grounding systems; performs scheduled and unscheduled maintenance on GSE; inspects, tests, and operates GSE to determine equipment serviceability and proper operation; services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air; diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications.</p> <p>Disassembles and assembles malfunctioning basic GSE accessories and components; removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories; stencils and marks GSE in accordance with technical publications; stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations.</p> <p>Prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles.</p> <p>Assists in maintaining vehicle records and assists with updating paper and electronic equipment records; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations; practices good housekeeping, tool control, foreign object damage prevention, and safety at all times.</p> <p>Performs all other duties as assigned or requested.</p> <h4>Minimum requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one-year actual AGE maintenance experience required.</li> <li>Must be qualified with most basic types and uses of AGE equipment.</li> <li>Must be familiar with diesel engine maintenance and repair, and HVAC maintenance and repair at the basic level.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Vehicle operator training.</li> <li>AGE mechanic experience within the last 10 years.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Maintains an Aircraft Scheduling and Documentation (ASD) maintenance and utilization program. Helps develop long range plans and establishes production schedules to meet customer requirements.</p> <p>Prepares weekly, monthly, quarterly, and annual utilization schedules for maintenance. Maintains proficiency in operations of the USAF Maintenance Information System including Core Automated Maintenance System (CAMS), Centralized Engine Management System (CEMS), and other maintenance management database library programs. Maintains equipment records in library files. Collects, reviews, and files documented information for planning and scheduling of various maintenance activities. Ensures accurate documentation is maintained for aircraft engines, munitions, missiles, AGE configurations, Time Compliance Technical Orders, time change items, and special inspections.</p> <p>USAF equivalent position is Aircraft Scheduling & Documentation Journeyman.</p> <h4>Essential responsibilities:</h4> <ul> <li>Prepares the weekly, monthly, quarterly, and annual utilization schedules for maintenance.</li> <li>Assist in the oversight of the TCTO process for completion and proper documentation with IMDS and/or CEMS.</li> <li>Supervises/maintains assigned aircraft/equipment records in database library files within IMDS and/or CEMS.</li> <li>Assists in the collection, review, and filing of documented information for planning and scheduling of RPA maintenance activities.</li> <li>Ensure accurate documentation is maintained for aircraft engines, munitions, missiles, AGE configurations, Time Compliance Technical Orders, time change items, and special inspections.</li> <li>Performs and documents training of lower ASD personnel to ensure mission readiness, as required.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma, or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of three years actual Aircraft Plans & Scheduling experience required.</li> <li>Must possess comprehensive planning and organizational skills.</li> <li>Must be able to work under deadlines with minimal supervision.</li> <li>Must be able to gain/maintain CEMS access for Engine Management purposes.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active U.S. driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Plans and scheduling experience within the last 10 years.</li> <li>Minimum of two years’ experience in operations of the USAF MIS, including CAMS/IMDS.</li> <li>RPA operations & deployment experience.</li> <li>Previous experience as engine manager with CEMS experience.</li> <li>Prior experience as a defense contractor.</li> <li>Previous MQ-9 plans and scheduling experience desired.</li> </ul> <h4>Compensation details:</h4> <p>35.25</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information:</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Maintains an Aircraft Scheduling and Documentation (ASD) maintenance and utilization program. Helps develop long range plans and establishes production schedules to meet customer requirements.</p> <p>Prepares weekly, monthly, quarterly, and annual utilization schedules for maintenance. Maintains proficiency in operations of the USAF Maintenance Information System including Core Automated Maintenance System (CAMS), Centralized Engine Management System (CEMS), and other maintenance management database library programs. Maintains equipment records in library files. Collects, reviews, and files documented information for planning and scheduling of various maintenance activities. Ensures accurate documentation is maintained for aircraft engines, munitions, missiles, AGE configurations, Time Compliance Technical Orders, time change items, and special inspections.</p> <p>USAF equivalent position is Aircraft Scheduling & Documentation Journeyman.</p> <h4>Essential responsibilities:</h4> <ul> <li>Prepares the weekly, monthly, quarterly, and annual utilization schedules for maintenance.</li> <li>Assist in the oversight of the TCTO process for completion and proper documentation with IMDS and/or CEMS.</li> <li>Supervises/maintains assigned aircraft/equipment records in database library files within IMDS and/or CEMS.</li> <li>Assists in the collection, review, and filing of documented information for planning and scheduling of RPA maintenance activities.</li> <li>Ensure accurate documentation is maintained for aircraft engines, munitions, missiles, AGE configurations, Time Compliance Technical Orders, time change items, and special inspections.</li> <li>Performs and documents training of lower ASD personnel to ensure mission readiness, as required.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma, or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of three years actual Aircraft Plans & Scheduling experience required.</li> <li>Must possess comprehensive planning and organizational skills.</li> <li>Must be able to work under deadlines with minimal supervision.</li> <li>Must be able to gain/maintain CEMS access for Engine Management purposes.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active U.S. driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Plans and scheduling experience within the last 10 years.</li> <li>Minimum of two years’ experience in operations of the USAF MIS, including CAMS/IMDS.</li> <li>RPA operations & deployment experience.</li> <li>Previous experience as engine manager with CEMS experience.</li> <li>Prior experience as a defense contractor.</li> <li>Previous MQ-9 plans and scheduling experience desired.</li> </ul> <h4>Compensation details:</h4> <p>35.25</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information:</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>What we are looking for: We are seeking an experienced Global Shelter &amp; Settlements (S&amp;S) Adviser to support NRC's programmes across the MENA region . In this role, you will provide strategic and technical leadership to Country Offices and Regional Offices, ensuring that high-quality Shelter &amp; Settlements strategies, systems, policies, tools, and practices are effectively developed and implemented. You will work closely with S&amp;S Specialists, Programme Development Managers, and Heads of Programme to strengthen programme quality, drive technical excellence, and support the delivery of impactful humanitarian responses. As the Global S&amp;S Adviser, you will play a key role in programme development by contributing to regional and country-level proposal design, identifying funding opportunities, and ensuring compliance with donor requirements. You will provide technical oversight, advisory support, and capacity strengthening to Country Office teams within your area of expertise. In addition, you may serve as the focal point for a specific region and/or technical area within the global S&amp;S team, providing guidance and support to fellow advisers while contributing to broader global initiatives and organisational learning. The Global S&amp;S team operates within NRC's technical matrix structure, collaborating closely with technical and operational colleagues across Country Offices, Regional Offices, and the Global Programme function. As part of a team of global advisers, you will maintain a technical relationship with country-based S&amp;S specialists and regional programme teams, helping to shape global policy, strategy, and technical direction. Success in this role requires a collaborative approach, strong stakeholder engagement, and a commitment to fostering innovation and shared learning across NRC. What you will do: Policy, Strategy and programme development • Responsible for ensuring compliance and adherence to NRC policies, guidance and procedures in relation to the S&amp;S area while contributing to the development of policies, strategies, tools and new approaches with a focus on innovation and piloting. • Responsible for supporting the development of country/regional core competence strategies and implementation plans in line with global policies and global and regional strategies. • Work within the Global Programme Section to contribute to specific areas of innovation and development, including piloting and learning from experiences at the country office and regional level. • Contribute to the resource mobilization and fundraising for country, multi-country and regional programme development related to S&amp;S. Technical development, support, and capacity building • Technical supervision of Country and Regional Office Specialists and Programme Development Managers, including providing strategic advice, technical support, capacity building, staff training, and contributing to recruitment. • Ensure that S&amp;S based programming approaches contribute to integrated response and analysis. • Contribute to the NRC global development of the S&amp;S, through collaborative working with and contribution to the NRC Global S&amp;S development, and by sharing learning and expertise with the Global level and Regional and Country Offices. • Facilitate and stimulate an environment conducive to innovation. Keep informed on innovation insights and analysis of relevance to S&amp;S. Ensure this knowledge is integrated into the systems and culture of the organisation at country and regional levels. Quality standards, data analysis and MEL • Provide strategic advice, technical support, and capacity building to Country and Regional Offices to ensure quality programming of core competencies, including Safe and Inclusive Programming. • Lead the institutionalization, roll-out, and capacity building of sector-specific MEL tools at Country Offices, ensuring effective planning, implementation, and data utilization. • Support and monitor compliance with the Response Policy and ensure quality oversight of core competency-related MEL, including data quality checks, Theory of Change reviews, and sign-off on evaluations and research. • Promote and document learning activities, contributing to strategic evaluations and research, and disseminating sector-specific learning and good practices at all levels, including direct support to Country Offices. Networking, representation and relationships • Responsible for identification, development and maintenance of relationships with relevant stakeholders (e.g., donors, Clusters/Working Groups, UN agencies, NGOs, research- and educational institutions, private sector) related to programmes in general and more specifically as related to NRC s Core Competencies. • Work in partnership with the regional and country office advocacy leads to identify and develop regional advocacy issues related to the core competence. Please download the detailed job description to learn more about this position.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>What you will bring: • Minimum 6 years of relevant professional experience in a similar position within the humanitarian field or similar. • In-depth knowledge of and experience with NRC s specialised areas of expertise • Proven experience in programme quality and strategic approaches to programme development. • Experience of developing practical tools and resources. • Experience of programme quality assessments, programme development and delivery. • Experience of delivering learning and development as part of quality improvement and capacity building. • Experience from different countries from across more than one NRC region. • Extensive experience in programming in complex and volatile contexts. • Willingness to travel to high-risk COs (including area offices and field offices). • Willingness to keep HEAT training valid. • Fluency in English, both written and verbal. Knowledge of French, Spanish or Arabic is considered an advantage. • Understanding of and commitment to organisational learning, and the role and contribution of Monitoring, Evaluation and Learning to quality management and development. • Understanding of, and commitment to working collaboratively with technical and operational colleagues within a matrix structure, including capacity building. • Understanding and experience of the specific demands of S&amp;S within (named Region, Country) contexts. • Understanding of and commitment to integrated response approaches.</p><p></p></section>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level electronic maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>USAF equivalent position is Avionics Technician Apprentice.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Applies basic technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities.</li> <li>Requires a basic understanding of the interrelationships of circuits and associated systems.</li> <li>Exercises independent judgment in performing assigned tasks in conjunction with designated direction from Production Staff, Avionic Leads, Avionics/Com Technician IIIs, or Avionics Technician IIs.</li> <li>Uses common and complex test instruments in the performance of assigned duties.</li> <li>Maintains, repairs, and installs various types of electronic equipment and related devices.</li> <li>Applies basic technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations.</li> <li>Must be able to work with limited supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft avionics and/or GCS maintenance experience required.</li> <li>Must have basic knowledge of basic and complex electronics maintenance and repair.</li> <li>Must have basic knowledge of RFF systems, components, and accessories.</li> <li>Must possess general understanding of technical publications related to aircraft electronics maintenance.</li> <li>Must know basic theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.</li> <li>Must be capable of using and reading blueprints, wiring diagrams, and data tables.</li> <li>Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or after the second deployment.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Current IAT Level II certification.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 experience as an avionics technician.</li> <li>Avionics technician experience within the last 10 years.</li> </ul> <h4>Compensation Details:</h4> <p>$34.52 per hour</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits Overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional Information</h4> <p>Original posting date: 05/29/2026 - Until Filled</p> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level electronic maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>USAF equivalent position is Avionics Technician Apprentice.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Applies basic technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities.</li> <li>Requires a basic understanding of the interrelationships of circuits and associated systems.</li> <li>Exercises independent judgment in performing assigned tasks in conjunction with designated direction from Production Staff, Avionic Leads, Avionics/Com Technician IIIs, or Avionics Technician IIs.</li> <li>Uses common and complex test instruments in the performance of assigned duties.</li> <li>Maintains, repairs, and installs various types of electronic equipment and related devices.</li> <li>Applies basic technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations.</li> <li>Must be able to work with limited supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft avionics and/or GCS maintenance experience required.</li> <li>Must have basic knowledge of basic and complex electronics maintenance and repair.</li> <li>Must have basic knowledge of RFF systems, components, and accessories.</li> <li>Must possess general understanding of technical publications related to aircraft electronics maintenance.</li> <li>Must know basic theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.</li> <li>Must be capable of using and reading blueprints, wiring diagrams, and data tables.</li> <li>Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or after the second deployment.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Current IAT Level II certification.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 experience as an avionics technician.</li> <li>Avionics technician experience within the last 10 years.</li> </ul> <h4>Compensation Details:</h4> <p>$34.52 per hour</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits Overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional Information</h4> <p>Original posting date: 05/29/2026 - Until Filled</p> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, A&P flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneuhydraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, A&P flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneuhydraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions, or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Journeyman.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work without supervision.</li> <li>Provides technical and directional leadership guidance to lower-level aircraft mechanics.</li> <li>Provides training to lower-level aircraft mechanics.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of three years of actual aircraft mechanic maintenance experience required.</li> <li>Minimum of one year experience on MQ-9 aircraft, as an aircraft mechanic.</li> <li>Must have comprehensive knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess comprehensive knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a comprehensive understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry, and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions, or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Journeyman.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work without supervision.</li> <li>Provides technical and directional leadership guidance to lower-level aircraft mechanics.</li> <li>Provides training to lower-level aircraft mechanics.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of three years of actual aircraft mechanic maintenance experience required.</li> <li>Minimum of one year experience on MQ-9 aircraft, as an aircraft mechanic.</li> <li>Must have comprehensive knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess comprehensive knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a comprehensive understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry, and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Introduction Established in 1951, IOM is a Related Organization of the United Nations and the leading UN agency in the field of migration. Working closely with governmental, intergovernmental and non-governmental partners, IOM promotes humane and orderly migration for the benefit of all. It saves lives and protects people on the move, drives solutions to displacement, and facilitates pathways for regular migration, while providing services and advice to governments and migrants. IOM is committed to fostering a respectful, inclusive and supportive workplace where all employees can thrive professionally and feel valued. By creating such an environment, IOM aims to better harness the full potential of migration and strengthen its support to people on the move. IOM invites candidates from diverse backgrounds to apply and provides reasonable accommodation throughout the recruitment process when required. Learn more about IOM s workplace culture at IOM workplace culture | International Organization for Migration. Applications are welcome from first- and second-tier candidates, particularly qualified female candidates as well as applications from the non-represented member countries of IOM. For all IOM vacancies, applications from qualified and eligible first-tier candidates are considered before those of qualified and eligible second-tier candidates in the selection process. For the purpose of this vacancy, the following are considered first-tier candidates: Internal candidates Candidates from the following IOM Member States that are not represented among staff members in the Professional and higher categories: Antigua and Barbuda, Bahamas, Barbados, Comoros, Congo (the), Cook Islands, Dominica, Federated States of Micronesia, Grenada, Guinea-Bissau, Holy See, Iceland, Israel, Kiribati, Marshall Islands, Namibia, Nauru, Palau, Saint Kitts and Nevis, Saint Lucia, Samoa, Sao Tome and Principe, Seychelles, Solomon Islands, Suriname, Tonga, Tuvalu, Vanuatu. Second tier candidates include: All external candidates, except candidates from non-represented member states of IOM. Organizational Context and Scope Under the overall supervision of the Chief of Mission (CoM) and direct supervision of the Head of Programmes (HOP), and in close collaboration with the relevant units at the Country Office (CO), Regional Office and Headquarters (HQ), the Project Development and Reporting Officer will be responsible and accountable for supporting the coordination and facilitation of project development, donor and institutional reporting in the fields of migration management, emergency response, as well as assisting with liaison activities with counterparts in the government, United Nations (UN) agencies and other relevant stakeholders in line with IOM s regional and country strategies.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Education</h2><p>Master s degree in International Relations, International Development, Political or Social Sciences, Migration Studies, Law, or a related field from an accredited academic institution with two years of relevant professional experience; or, University degree in the above fields with four years of relevant professional experience.</p><h2>Experience</h2><ul><li>Experience with Results Based Management approach and other strategic planning approaches;</li><li>Experience in supporting results-based project development and reporting, technical writing and editing, preferably in the international development/humanitarian sector; and,</li><li>Work experience in donor relations and grant management for specific donors of IOM s interest.</li></ul><h2>Skills</h2><ul><li>Good communication, writing and organizational skills; ability to prepare clear and concise reports;</li><li>Basic knowledge of monitoring and evaluation concepts, approaches and methodologies;</li><li>Confirmed experience in donor report writing in humanitarian and/or development settings;</li><li>Excellent analytical and planning skills; capacity to establish working relationships with governmental authorities, national and international institutions and Non-Governmental Organizations;</li><li>Capacity to supervise and train support staff; ability to work effectively and harmoniously with colleagues from varied cultures and professional background;</li><li>Ability to work with accuracy under constraints and pressure; high sense of confidentiality, initiative and good judgment;</li><li>Personal commitment, efficiency, flexibility, drive for results, creative thinking; and,</li><li>Good level of computer literacy, including database applications.</li></ul><h2>Languages</h2><p>For this position, fluency in English is required (oral and written). Working knowledge of Arabic and another official UN language (Chinese, French, Russian and Spanish) is an advantage. Proficiency of language(s) required will be specifically evaluated during the selection process, which may include written and/or oral assessments.</p><h2>Required Competencies</h2><p>IOM s competency framework can be found at this link . Competencies will be assessed during the selection process.</p><h2>Values</h2><p>all IOM staff members must abide by and demonstrate these five values:</p><ul><li>Inclusion and respect for diversity : Respects and promotes individual and cultural differences. Encourages diversity and inclusion.</li><li>Integrity and transparency : Maintains high ethical standards and acts in a manner consistent with organizational principles/rules and standards of conduct.</li><li>Professionalism : Demonstrates ability to work in a composed, competent and committed manner and exercises careful judgment in meeting day-to-day challenges.</li><li>Courage : Demonstrates willingness to take a stand on issues of importance.</li><li>Empathy : Shows compassion for others, makes people feel safe, respected and fairly treated.</li></ul><h2>Core Competencies behavioural indicators Level 2</h2><ul><li>Teamwork : Develops and promotes effective collaboration within and across units to achieve shared goals and optimize results.</li><li>Delivering results : Produces and delivers quality results in a service-oriented and timely manner. Is action oriented and committed to achieving agreed outcomes.</li><li>Managing and sharing knowledge : Continuously seeks to learn, share knowledge and innovate.</li><li>Accountability : Takes ownership for achieving the Organization s priorities and assumes responsibility for own actions and delegated work.</li><li>Communication : Encourages and contributes to clear and open communication. Explains complex matters in an informative, inspiring and motivational way.</li></ul><h2>Managerial Competencies behavioural indicators Level 2</h2><ul><li>Leadership : Provides a clear sense of direction, leads by example and demonstrates the ability to carry out the Organization s vision. Assists others to realize and develop their leadership and professional potential.</li><li>Empowering others : Creates an enabling environment where staff can contribute their best and develop their potential.</li><li>Building Trust : Promotes shared values and creates an atmosphere of trust and honesty.</li><li>Strategic thinking and vision : Works strategically to realize the Organization s goals and communicates a clear strategic direction.</li><li>Humility : Leads with humility and shows openness to acknowledging own shortcomings.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. USAF equivalent position is Aircraft Mechanic Apprentice. Essential Responsibilities: Performs all daily launch/recovery duties in support of operational requirements. Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems. Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion. Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools. Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs. Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft. Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks. May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Must be able to work with little-to-no supervision. Performs all other duties as assigned as requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>Minimum Requirements:</b></p><ul><li>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li><li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li><li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications:</p><ul><li>Associate degree in a relevant career field.</li><li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Aircraft Mechanic Experience within the last 10 years.</li><li>MQ-9 Experience as an Aircraft Mechanic.</li><li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>What we are looking for: We are seeking an experienced Global Shelter &amp; Settlements (S&amp;S) Adviser to support NRC's programmes across the MENA region . In this role, you will provide strategic and technical leadership to Country Offices and Regional Offices, ensuring that high-quality Shelter &amp; Settlements strategies, systems, policies, tools, and practices are effectively developed and implemented. You will work closely with S&amp;S Specialists, Programme Development Managers, and Heads of Programme to strengthen programme quality, drive technical excellence, and support the delivery of impactful humanitarian responses. As the Global S&amp;S Adviser, you will play a key role in programme development by contributing to regional and country-level proposal design, identifying funding opportunities, and ensuring compliance with donor requirements. You will provide technical oversight, advisory support, and capacity strengthening to Country Office teams within your area of expertise. In addition, you may serve as the focal point for a specific region and/or technical area within the global S&amp;S team, providing guidance and support to fellow advisers while contributing to broader global initiatives and organisational learning. The Global S&amp;S team operates within NRC's technical matrix structure, collaborating closely with technical and operational colleagues across Country Offices, Regional Offices, and the Global Programme function. As part of a team of global advisers, you will maintain a technical relationship with country-based S&amp;S specialists and regional programme teams, helping to shape global policy, strategy, and technical direction. Success in this role requires a collaborative approach, strong stakeholder engagement, and a commitment to fostering innovation and shared learning across NRC. What you will do: Policy, Strategy and programme development Responsible for ensuring compliance and adherence to NRC policies, guidance and procedures in relation to the S&amp;S area while contributing to the development of policies, strategies, tools and new approaches with a focus on innovation and piloting. Responsible for supporting the development of country/regional core competence strategies and implementation plans in line with global policies and global and regional strategies. Work within the Global Programme Section to contribute to specific areas of innovation and development, including piloting and learning from experiences at the country office and regional level. Contribute to the resource mobilization and fundraising for country, multi-country and regional programme development related to S&amp;S. Technical development, support, and capacity building Technical supervision of Country and Regional Office Specialists and Programme Development Managers, including providing strategic advice, technical support, capacity building, staff training, and contributing to recruitment. Ensure that S&amp;S based programming approaches contribute to integrated response and analysis. Contribute to the NRC global development of the S&amp;S, through collaborative working with and contribution to the NRC Global S&amp;S development, and by sharing learning and expertise with the Global level and Regional and Country Offices. Facilitate and stimulate an environment conducive to innovation. Keep informed on innovation insights and analysis of relevance to S&amp;S. Ensure this knowledge is integrated into the systems and culture of the organisation at country and regional levels. Quality standards, data analysis and MEL Provide strategic advice, technical support, and capacity building to Country and Regional Offices to ensure quality programming of core competencies, including Safe and Inclusive Programming. Lead the institutionalization, roll-out, and capacity building of sector-specific MEL tools at Country Offices, ensuring effective planning, implementation, and data utilization. Support and monitor compliance with the Response Policy and ensure quality oversight of core competency-related MEL, including data quality checks, Theory of Change reviews, and sign-off on evaluations and research. Promote and document learning activities, contributing to strategic evaluations and research, and disseminating sector-specific learning and good practices at all levels, including direct support to Country Offices. Networking, representation and relationships Responsible for identification, development and maintenance of relationships with relevant stakeholders (e.g., donors, Clusters/Working Groups, UN agencies, NGOs, research- and educational institutions, private sector) related to programmes in general and more specifically as related to NRC s Core Competencies. Work in partnership with the regional and country office advocacy leads to identify and develop regional advocacy issues related to the core competence. Please download the detailed job description to learn more about this position. What you will bring: Minimum 6 years of relevant professional experience in a similar position within the humanitarian field or similar. In-depth knowledge of and experience with NRC s specialised areas of expertise Proven experience in programme quality and strategic approaches to programme development. Experience of developing practical tools and resources. Experience of programme quality assessments, programme development and delivery. Experience of delivering learning and development as part of quality improvement and capacity building. Experience from different countries from across more than one NRC region. Extensive experience in programming in complex and volatile contexts. Willingness to travel to high-risk COs (including area offices and field offices). Willingness to keep HEAT training valid. Fluency in English, both written and verbal. Knowledge of French, Spanish or Arabic is considered an advantage. Understanding of and commitment to organisational learning, and the role and contribution of Monitoring, Evaluation and Learning to quality management and development. Understanding of, and commitment to working collaboratively with technical and operational colleagues within a matrix structure, including capacity building. Understanding and experience of the specific demands of S&amp;S within (named Region, Country) contexts. Understanding of and commitment to integrated response approaches. What we offer: Duty station: Mobile contract based in Amman and/or Resident contract for nationals of countries in the MENA region, with ability to travel across the region. Contract: Temporary (2 years). Travel: up to 40% including up to 30 days deployment at a time.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum 6 years of relevant professional experience in a similar position within the humanitarian field or similar. In-depth knowledge of and experience with NRC s specialised areas of expertise Proven experience in programme quality and strategic approaches to programme development. Experience of developing practical tools and resources. Experience of programme quality assessments, programme development and delivery. Experience of delivering learning and development as part of quality improvement and capacity building. Experience from different countries from across more than one NRC region. Extensive experience in programming in complex and volatile contexts. Willingness to travel to high-risk COs (including area offices and field offices). Willingness to keep HEAT training valid. Fluency in English, both written and verbal. Knowledge of French, Spanish or Arabic is considered an advantage. Understanding of and commitment to organisational learning, and the role and contribution of Monitoring, Evaluation and Learning to quality management and development. Understanding of, and commitment to working collaboratively with technical and operational colleagues within a matrix structure, including capacity building. Understanding and experience of the specific demands of S&amp;S within (named Region, Country) contexts. Understanding of and commitment to integrated response approaches.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>THE ORGANIZATION: Handicap International is an independent and impartial international aid organisation working in situations of poverty and exclusion, conflict and disaster. Working alongside persons with disabilities and other vulnerable groups, our action and testimony are focused on responding to their essential needs, improving their living conditions and promoting respect for their dignity and their fundamental rights. Handicap International is a not-for-profit organisation with no religious or political affiliation. It operates as a federation made up of a network of associations that provide it with human and financial resources, manage its projects and implement its actions and social mission. For more details on the association: http://www.handicap-international.fr/en/s/index.html Mashriq Program is a decentralised geographic division working in the Midle East and covering Jordan, Lebanon, Egypt, Iraq, and during 2026 Syria will join the program. In this region, we cover the full manadte of HI emergency, Armed reduction violence and development with strong focus on continuum and resilience. There are 5 main sectors of intervention: rehabilitation, education, early child development, BaNEREI (basic needs, economic recovery and economic inclusion) and armed violence reduction. Inclusion Humanitarian Action is both crosscutting within main sectors and sometimes a standalone intervention. OBJECTIVE OF THE POSITION: Under the line management of the Technical Head of Program (THoP), the Regional Rehabilitation Specialist contributes to the implementation of HI s mandate and operational strategy within the Mashriq programme, in line with HI global policies. The position provides strategic and operational technical support in Rehabilitation across the Mashriq countries, ensuring quality, relevance, and impact of rehabilitation interventions. The role requires flexibility and frequent travel across the region according to operational needs. Reports to: Technical Head of Program Programme Mashriq Interacts with: Mashriq Program teams Country teams (Jordan, Lebanon, Palestine, Egypt, Syria) HQ Technical Specialists and Global Rehabilitation team External partners, networks, and institutions when required Mission 1: Expertise 1.1 Contributes to the regional strategies and countries mission strategies when relevant in line with the global strategies • Provides sectorial technical inputs to the STRATOPs for the program, with regard to rehabilitation, in line with the global STRATECH and ensure relevant follow up, • Participate to any relevant strategical exercises organized at mission level, • Participate in continuous needs assessments for development of new projects and / or adaptation of existing projects. 1.2 Ensure technical support to projects in line with the global technical frameworks and standards on Rehabilitation • Provide adequate technical guidance and support to Project Managers (adapt standards to PM s tools, contribute to proposal writing and reporting) in line with strategies, standards and mandatory transversal approaches • Provide ongoing technical support and training for the technical and projects field staff, through direct provision of both formal and on the job training; • Take part in Rehabilitation needs assessments for the development of new projects or adaptation of existing ones. • Support the PM to set individual objectives for the TOs, evaluate individual performance when required, contribute to development &amp; career evolution, monitor competences; • Create capacity building plan for TO, and or officer and or partners and follow up on its implementation. 1.3 Support the design and contextualization of technical tools, training, materials and other relevant documents, and disseminate them among the mission/humanitarian regional community (as needed) upon prior validation by the relevant HQ Technical Specialists • Ensure the implementation of the comprehensive approach and coordination with the other staff. • Ensure good communication and coordination with team members and other internal stakeholders through regular meetings; • Ensure adequate support to multi-sector responses within projects, in line with the other Specialists • Ensure a local sectorial watch and best practice capture • Participate to the design of positions, recruitment and induction of Rehabilitation team members in collaboration with the Operations Manager and Human Resources Manager. 1.4 Ensure technical learning from projects • Initiate and/or implement to projects technical learning within her sectorial scope • Contribute to projects capitalization and ensure technical learning from Rehabilitation activities • Contribute to the evaluation of projects with a Rehabilitation component, identify lessons learnt, and best practices; 1.5 Ensure the control &amp; monitoring of the technical quality and the relevance of HI s activities in the Programmers under Rehabilitation activities • Ensure regular technical quality control of projects and programs and issue warnings and recommendations • Perform frequent field visits for technical supervision, on-the-job training, and quality assurance; • Support quantitative and qualitative data collection from Rehabilitation teams, in particular focused on ensuring that data is disaggregated by gender, age and disability; • When required contribute to writing internal and external reports; • Provide relevant data related to Rehabilitation activities (statistics, monthly objectives, etc.); • Monitor the implementation of audit recommendations, if applicable, in Rehabilitation scope 1.6 Ensure compliance of the technical proposition with nexus stakes 1.7 Contributes to the development of research and innovation projects at country and region level, when relevant, in the MHPSS expertise. • Suggest and steer technical innovation projects • Identify the priorities of Research and Studies 1.8 Contribute to the Technical Divisions professional channel animation • Contribute to the global animation of the professional channels under Rehabilitation sector, coming from the Technical Divisions (community of practice ) • Animate a local talent pool in Rehabilitation Scope (carry out technical interviews of candidates and produce recommendations, identify the needs regarding trainings) Mission 2: Influence Contribute to the local external prestige and influence of HI s expertise in the field of expertise and foster technical partnerships between HI and other actors. • Represent the technical expertise of HI throughout the local relevant networks (Sectorial Representation at regional level) • Contribute to advocacy on specific themes in line with the global advocacy priorities • Contribute to communication messages locally in line with the global communication priorities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>An advanced degree in Physiotherapy, Occupational Therapy, Physical Medicine and Rehabilitation, or another relevant rehabilitation discipline.</p><p>A minimum of 5 years of experience in international development, emergency, and post-crisis contexts in technical positions.</p><p>Proven experience in technically supporting physical and functional rehabilitation projects and programmes.</p><p>Experience working in complex environments and in collaboration with national rehabilitation actors at service, central, and international levels.</p><p>Solid experience in project management.</p><p>Strong strategic and analytical skills, with the ability to develop clear frameworks and guidelines.</p><p>Advanced writing and proposal development skills in English.</p><p>Demonstrated capacity to design and deliver technical tools and trainings adapted to different audiences.</p><p>Strong experience in capacity building and adult learning methodologies.</p><p>Ability to work effectively in multicultural and multidisciplinary environments.</p><p>A proactive attitude, team spirit, and strong interpersonal skills.</p><p>Resilience to stress and uncertainty, with a high level of empathy and professionalism.</p><p>Preferable:</p><p>A Master s degree in Public Health.</p><p>Previous international experience in the Middle East.</p><p></p></section>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply comprehensive technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engine in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Journeyman.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic/hydraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work without supervision.</li> <li>Provides technical and directional leadership guidance to lower-level aircraft mechanics.</li> <li>Provides training to lower-level aircraft mechanics.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of three years of actual aircraft mechanic maintenance experience required.</li> <li>Minimum of one year experience on MQ-9 aircraft, as an aircraft mechanic.</li> <li>Must have comprehensive knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess comprehensive knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a comprehensive understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul> <h4>Compensation details:</h4> <p>$36.26 per hour</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>