وظائف ميكانيكى سفن

<p>Aerostat Operators provide Operations and Sustainment (O&amp;S) support for the Persistent Surveillance Systems Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs. Position will require 6-week training TDY to Elizabeth City, South Carolina.</p><p><b><br></b></p><p><b>Essential Responsibilities:</b></p><p>Aerostat Operators/User-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities. Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, And Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), Sensor Payload(s), communications and navigation systems as well as associated support equipment (Boom Lift, Forklift, All Terrain Vehicles (ATV's), and Electrical Power Generators). Candidate will perform User-level maintenance functions include performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads. Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent is required.</li><li>Two-year Associate s degree in a technical field from an accredited college can substitute for work experience.</li><li>Must have an active Secret US Government Clearance.</li><li>Note: US Citizenship is required to obtain a Secret Clearance.</li><li>Must have a valid U.S. passport with a minimum of one year remaining.</li><li>Must have valid US Driver's license.</li><li>Knowledge of and experience in the operations of hardware systems and components.</li><li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li><li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li><li>At least one (1) year previous Aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li><ul><li>1) Electrical Maintenance Mechanic</li><li>Possess at least two (2) year s aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li><li>Two years of hands-on experience in performing operations and maintenance tasks either on an AEROSTAT system or a related industry/military equivalent is required.</li><li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li><li>Ability to read electronic schematics.</li><li>O&amp;M of electro-mechanical equipment to include one or more of the following: Hydraulic/servo valves Hydraulic actuators, control systems Test and diagnostic equipment</li><li>2) Networking, IT &amp; information systems</li><li>Two years experience is required.</li><li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered.</li><li>CCIE certification with fiber optic certification is preferred.</li><li>3) Mechanical Maintenance</li><li>Mechanical Maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li><li>Two years of hands-on experience on an AEROSTAT system or a related industry/military equivalent is required.</li><li>O&amp;M of mechanical equipment to include one or more of the following: Hydraulic systems, Winch systems, Tether/cable handling systems, Industrial generator sets, Power switch gear, HVAC, Cranes Aerial lift , Forklift , Industrial generator sets</li></ul></ul><p>Physical Requirements:</p><p>Requires the ability to regularly lift up to 50 lbs. Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift. Requires the flexibility to bend/stoop, squat repetitive during shift. Required the ability to regularly kneel repetitive for shift. Requires the ability to move in a 90-degree fashion on a repetitive basis for shift. Requires the ability to stretch/reach on a repetitive basis for shift. Requires the ability to walk extensively throughout the plant during shift. Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</p><p>Medical Requirements:</p><p>Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for the duration of the deployment.</p><p>Working and Living Conditions:</p><p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p>

<p>Aerostat Operators provide Operations and Sustainment (O&amp;S) support for the Persistent Surveillance Systems Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs. Position will require 6-week training TDY to Elizabeth City, South Carolina. Essential Responsibilities: Aerostat Operators/User-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities. Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, And Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), Sensor Payload(s), communications and navigation systems as well as associated support equipment (Boom Lift, Forklift, All Terrain Vehicles (ATV's), and Electrical Power Generators). Candidate will perform User-level maintenance functions include performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads. Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent is required.</li><li>Two-year Associate s degree in a technical field from an accredited college can substitute for work experience.</li><li>Must have an active Secret US Government Clearance. Note: US Citizenship is required to obtain a Secret Clearance.</li><li>Must have a valid U.S. passport with a minimum of one year remaining.</li><li>Must have valid US Driver's license.</li><li>Knowledge of and experience in the operations of hardware systems and components.</li><li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li><li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li><li>At least one (1) year previous Aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li><ul><li>1) Electrical Maintenance Mechanic Possess at least two (2) year s aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent. Two years of hands-on experience in performing operations and maintenance tasks either on an AEROSTAT system or a related industry/military equivalent is required. Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required. Ability to read electronic schematics. O&amp;M of electro-mechanical equipment to include one or more of the following: Hydraulic/servo valves Hydraulic actuators, control systems Test and diagnostic equipment</li><li>2) Networking, IT &amp; information systems Two years experience is required. Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered. CCIE certification with fiber optic certification is preferred.</li><li>3) Mechanical Maintenance Mechanical Maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater. Two years of hands-on experience on an AEROSTAT system or a related industry/military equivalent is required. O&amp;M of mechanical equipment to include one or more of the following: Hydraulic systems, Winch systems, Tether/cable handling systems, Industrial generator sets, Power switch gear, HVAC, Cranes Aerial lift , Forklift , Industrial generator sets</li></ul><li>Physical Requirements: Requires the ability to regularly lift up to 50 lbs.</li><li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li><li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li><li>Required the ability to regularly kneel repetitive for shift.</li><li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li><li>Requires the ability to stretch/reach on a repetitive basis for shift.</li><li>Requires the ability to walk extensively throughout the plant during shift.</li><li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li><li>Medical Requirements: Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq.</li><li>Must maintain physical and dental requirements for the duration of the deployment.</li><li>Working and Living Conditions: This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions.</li><li>While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment.</li><li>Temperatures can reach 130 degrees Fahrenheit/50-55 degrees Celsius during the summer months.</li><li>Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods.</li><li>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</li></ul>

<p><h4>Essential responsibilities</h4> <p>Aerostat operators provide operations and sustainment (O&S) support for the Persistent Surveillance Systems – Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs.</p> <p>Position will require 6-week training TDY to Elizabeth City, South Carolina.</p> <p>Aerostat operators and user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidates will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active Secret US government clearance. Note: US citizenship is required to obtain a Secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience or two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <h4>1) Electrical maintenance mechanic</h4> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>Operations and maintenance of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <h4>2) Networking, IT & information systems</h4> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or Comp T Certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <h4>3) Mechanical maintenance</h4> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>Operations and maintenance of mechanical equipment to include one or more of the following: <ul> <li>Hydraulic systems</li> <li>Winch systems</li> <li>Tether/cable handling systems</li> <li>Industrial generator sets</li> <li>Power switch gear</li> <li>HVAC</li> <li>Cranes, aerial lift, forklift</li> <li>Industrial generator sets</li> </ul> </li> </ul> <h4>Physical requirements</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months.</p> <p>Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods.</p> <p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Operations and Sustainment Support</h4> <p>Aerostat operators provide operations and sustainment (O&S) support for the Persistent Surveillance Systems – Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs.</p> <p>Position will require a 6-week training TDY to Elizabeth City, South Carolina.</p> <h4>Essential Responsibilities</h4> <p>Aerostat operators and user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat-mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems, as well as associated support equipment (boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidates will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under the direction of higher classified technicians and/or site personnel.</p> <h4>Minimum Requirements</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active Secret US Government Clearance. Note: US citizenship is required to obtain a Secret Clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have a valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <h4>1) Electrical Maintenance Mechanic</h4> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools).</li> <li>Ability to read electronic schematics.</li> <li>Operations and maintenance of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <h4>2) Networking, IT & Information Systems</h4> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network+ or CompTIA Certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <h4>3) Mechanical Maintenance</h4> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>Operations and maintenance of mechanical equipment to include one or more of the following: <ul> <li>Hydraulic systems</li> <li>Winch systems</li> <li>Tether/cable handling systems</li> <li>Industrial generator sets</li> <li>Power switch gear</li> <li>HVAC</li> <li>Cranes, aerial lift</li> <li>Forklift</li> <li>Industrial generator sets</li> </ul> </li> </ul> <h4>Physical Requirements</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladders, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend, stoop, and squat repeatedly during shift.</li> <li>Requires the ability to regularly kneel repeatedly during shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis during shift.</li> <li>Requires the ability to stretch and reach repeatedly during shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical Requirements</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment to Iraq.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and Living Conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environments. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months.</p> <p>Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Operations and sustainment support</h4> <p>Aerostat operators provide operations and sustainment (O&S) support for the Persistent Surveillance Systems – Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs.</p> <p>Position will require 6-week training TDY to Elizabeth City, South Carolina.</p> <h4>Essential responsibilities</h4> <p>Aerostat operators and user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat-mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidates will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <h4>1) Electrical maintenance mechanic</h4> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <h4>2) Networking, IT & information systems</h4> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or Comp T certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <h4>3) Mechanical maintenance</h4> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) certified truck mechanic or Federal Aviation Administration (FAA) general mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: <ul> <li>Hydraulic systems</li> <li>Winch systems</li> <li>Tether/cable handling systems</li> <li>Industrial generator sets</li> <li>Power switch gear</li> <li>HVAC</li> <li>Cranes, aerial lift, forklift</li> <li>Industrial generator sets</li> </ul> </li> </ul> <h4>Physical requirements</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required by the employer and customer for deployment to Iraq.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months.</p> <p>Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods.</p> <p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p>Serve under the direction of Power Plant Supervisor to operate and maintain power plant/spot power generators &amp; equipment Promote and maintain safety following established safe work practices and procedures Report to the Supervisor on all special occurrences such as emergency outages and corrective actions taken to maintain service. Anticipate unscheduled load changes, and detect early indications of power generating equipment malfunctions in order to maintain continuous service Troubleshoot and make comparable major repairs to Gensets, powered support systems, vehicles, and other major components (e.g., engines, generators, alternators, gears, compressors, and hydraulic, pneumatic, electrical components) Rebuild and/or overhaul-to include top end, in frame and complete Gensets, powered support systems, and other major components (e.g., engines, generators, alternators, gears, compressors, hydraulic, pneumatic and 12/24vdc electrical components Assist in the control and distribution of the mechanical and electrical makeup and operation of powered support systems such as those described above, including their major mechanical, electrical, hydraulic, and pneumatic components Troubleshoot and repair diesel, gasoline, and/or multi-fuel engines (e.g., PMCS, break down repairs, periodic maintenance, and overhauling those of 3 to 16 cylinders and up to 2MW of power) When power production malfunctions occur and to ensure personnel and equipment safety, assist to isolate generator/s and bypass fault in order to maintain service or take actions to shed low priority loads when full service cannot be maintained Ensure correct testing and isolation procedures are followed before working on de-energized High Voltage Networks or Switchgear When workload/mission/staffing levels dictate, assist with daily Power Plant operations to include bringing online/offline gensets, synchronizing/paralleling gensets, taking hourly generator readings, fueling in power plant environment, electrical distribution installation/maintenance, facility maintenance, housekeeping, etc. When workload/mission/staffing levels dictate, assist with MV/LV electrical/Power Plant operations teams with installation/removal of electrical distribution equipment Fill in required genset service/periodic maintenance/repair documents/reports and turn over to Lead Power Plant Supervisor Ensure required documentation/reporting is submitted in a timely manner Request/retrieve service/maintenance/repair parts/components from Prime Contractor Consolidated Material Warehouse and transport to genset/power plant service/repair location Attend/deliver daily Safety meetings/stand downs IAW with VGS and Prime contractor policies Most senior Power Gen Mechanic and Team leader for power generating equipment in spot gen or power plant environment at assigned work location Take ownership of Power Plant generator fleet to ensure repairs, maintenance, overhauls, etc. are performed with utmost of quality/safety in mind and IAW manufacturer's service/maintenance recommendations Assist Prime contractor Procurement/Materials staff with acquiring repair parts/consumables by supplying Genset model data, part numbers, descriptions and technical oversight when required Willingness to attend formal OEM specific genset and/or controls training Accountability for power gen mechanic staff, tools, manuals, and gen set status-FMC/NMC Ensure less experienced members of power gen mechanic team are performing services/minor repairs to high quality standards and IAW manufacturer's recommendations Ensure power generator staff are performing service/maintenance/repair duties IAW US Military, Prime Contractor, Host Nation and VGS Environmental/Hazmat policies and procedures Attend VGS EHS (Electrical Health &amp; Safety) training and establish a status of CP (Competent Person), AP (Authorized Person) or SAP (Senior Authorized Person) Thorough understanding of oil sample analysis process as well as interpretation of oil analysis reports Operate/perform within the behavioral guidelines/policies/procedures put forth by USG, US Military Command, Host Nation, Prime Contractor and VGS Execute the company s policy and procedure for proper and efficient operation of the power plants and distribution network to support AFCAP Duties will involve work in the outdoors with a potential exposure to arid climatic conditions including extreme temperatures in the summer months Must be able to work overhead with arms raised for extended periods. As directed by the Power Plant Supervisor</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have computer skills and be able to operate a variety of computer programs.</li><li>Must be able to speak, read and write English fluently</li><li>Must maintain a valid driver s license from their home country with validity for 12 months from on-site employment date</li><li>Must maintain a valid passport from their home country with validity for 12 months from on-site employment date. Passport must have a minimum of 6 blank pages prior to OCONUS mobilization.</li><li>To perform this job Must satisfy the AFCENT Force Health Protection Guidance medical requirements for AFCENT prior to OCONUS mobilization, must be able to maintain a Medically Qualified (MQ) rating on an annual basis.</li><li>Must meet the host nation COVID-19 entry requirements; COVID-19 vaccination(s), fully inoculated and Booster.</li><li>Must be CAC eligible and able to gain and maintain authorized entry onto US military installations.</li><li>satisfactorily, an individual must be able to perform each essential job duty satisfactorily. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform essential job functions.</li></ul><b>Desired Qualifications</b><ul><li>Experience in medium to large scale operation, maintenance and complete overhaul of prime power diesel gensets (50-60 liter engines)</li><li>Cummins Mech III Mechanic Certification or equivalent</li><li>Cummins Certification for KTA50 engines and PCC3300 controllers or equivalent</li><li>High skill level with Cummins InPower or equivalent</li></ul><b>Additional Required Qualifications</b><ul><li>Must be CAC eligible</li><li>Must hold a security clearance and/or be eligible to obtain one</li><li>Experience in maintenance, repair, operation and troubleshooting of genset systems (fuel, induction, cooling, controls, exhaust, engine internal &amp; peripheral) of gen sets ranging from 15Kw to 2Mw</li><li>Experience using all types hand and power tools, shop equipment such as hydraulic presses, drill presses, hydraulic, electric or pneumatic lifting devices, etc</li><li>Experience using all types of measuring devices such as Vernier calipers, micrometers, dial bore gauges, etc</li><li>Experienced in working with other technical staff</li><li>Ability to read and use technical manuals, illustrations, diagrams, schematics, and similar guides covering the complete assembly, troubleshooting, and layout of power generators and/or support systems</li><li>Experienced working in international work environments with expatriate or US military</li><li>A thorough knowledge of the mechanical and electrical makeup and operation of powered support systems such as those described above, including their major mechanical, electrical, hydraulic, and pneumatic components including: Standard Diesel generators, Controls to include genset synchronizing and paralleling, genset communication/monitoring systems such as PULSE SCADA and Switchgear</li><li>Proactive nature and strong interpersonal skills in collaborating, communicating and working with (1) Other senior managers and staff (to include Site management team), (2) Local and International subcontractors; (3) US Military representatives; and (4) Local officials as required</li><li>Must be willing and able to perform physical activities including heavy lifting, climbing in and out of equipment, crawling and working outdoors.</li><li>Must be willing and able to lift and move items, parts assemblies and equipment up to the safety regulation maximum.</li><li>Ability to follow troubleshooting procedures and use deductive reasoning to isolate the fault; and provide step by step feedback on all steps taking</li><li>Able to take specific verbal and written directions and carryout directions from the supervisor. Decisions made are covered by specific, well-established work methods and procedures In the event problems arise, mechanics at this level are able take corrective action in accordance with instructions or notify their supervisor</li><li>Experience in providing prime power O&amp;M Services to clients</li><li>Hands on inspect, test, and repair components of electrical systems to include generators, transformers, transfer switches, switch gear, PLC controls, and fuel monitoring and delivery systems</li><li>Knowledge and experience regarding occupational hazards for electrical and mechanical trades, related safety practices, and skill required for the installation, maintenance, and repair of power generator systems and equipment</li><li>Basic knowledge and trained with current certification of First Aid &amp; CPR</li><li>Must rescue an injured victim from an electrical conductor</li><li>Must know Lockout/Tagout Procedures</li><li>Ability to read, comprehend/understand and apply information contained in manufacturer equipment manuals, facility document including drawings and specification, operation and maintenance manuals, standard operating and emergency response procedures, material safety data sheets, etc</li><li>Ability to interpret and apply required corrective action with data readings and results of equipment checks to identify equipment or process problems and take appropriate responses to correct or resolve problems</li><li>Specific understanding and knowledge of power generation equipment startup and shut down and basic equipment maintenance procedures as they relate to the power generation equipment and/or auxiliary operator</li><li>Must have knowledge of use and proper application of Personal Protective Equipment</li><li>Basic skill level with Microsoft Word, Outlook and Excel is required. Intermediate level is preferred</li><li>10+ years as Lead Generator Mech III</li><li>Provide Certificates and/or willingness to attend formal training</li></ul><b>Role Characteristics</b><ul><li>Great interpersonal skills.</li><li>Customer service oriented.</li><li>Team player.</li><li>Ability to multi-task.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Company Description<br><br><p>"Why work for Accor?<br>We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.<br>By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality. Discover the life that awaits you at Accor, visit https://careers.accor.com/<br>Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS"</p><br><br>Job Description<br><br><p><strong>Plumber - Mövenpick Resort &amp; Residences Aqaba</strong></p><br><p><br>You perform highly diversified duties to install, troubleshoot, repair and maintain the property’s facilities and equipment to ensure a safe and functional environment for the guests.<br><strong>What is in it for you:</strong></p><br><ul><li>Employee benefit card offering discounted rates in Accor worldwide</li><li>Learning programs through our Academies</li><li>Opportunity to develop your talent and grow within your property and across the world!</li><li>Ability to make a difference through our Corporate Social Responsibility activities, like Planet 21</li></ul><p><strong>What you will be doing:</strong></p><br><ul><li>Takes prompt action relating to all maintenance orders concerning all plumbing services in the guest rooms, kitchen, health club, toilets, plant-rooms, swimming pool, all staff and guest locker rooms and all related areas.</li><li>Performs preventive maintenance works on all plumbing lines and sanitary fixtures as per the annual maintenance chart.</li><li>Notes all required spare parts and consumable material and instructs the storekeeper of the requirements.</li><li>With the help of the checklist, inspects the hotel on daily bases for any defects on the plumbing services and sanitary fixtures and takes prompt action to rectify the defects.</li><li>Takes the responsibilities of the pool attendant.</li><li>Takes regular readings on water and gas consumption and records it on the energy consumption record charts</li></ul><p><strong>Your experience and skills include:</strong></p><br><ul><li>Relevant building maintenance experience is an asset</li><li>Strong interpersonal and problem solving abilities</li><li>Highly responsible &amp; reliable</li></ul><p><strong>Your team and working environment:</strong></p><br><ul><li>Member of the fire team.</li><li>Assists the general mechanic, boiler-man and refrigeration technician whenever required.</li><li>To report for duty punctually wearing the correct uniform and name badge at all times.</li><li>To provide courteous and professional service at all times.</li></ul><p><br><strong>Our commitment to Diversity &amp; Inclusion:</strong><br>We are an inclusive company and our ambition is to attract, recruit and promote diverse talent.<br><strong>Why work for Accor?</strong><br>We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.<br>By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality. Discover the life that awaits you at Accor, visit&nbsp;&nbsp;https://careers.accor.com/</p><br><p>Do what you love, care for the world, dare to challenge the status quo!&nbsp;<strong>#BELIMITLESS</strong></p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Role To supervise and control the operation of the building management system and monitor all plant activities of the headquarters building services. To provide accurate administration support to the Engineering Team To interact with Housekeeping, Front Office Team to ensure our guests receives high level of service. To provide service that is sincere, warm and enthusiastic whilst ensuring the guest satisfaction. Key Deliverables and Responsibilities Planning &amp; Organizing: Is aware of the daily activities and has product knowledge of all the hotel facilities To be punctual on duty and ensure the same of your employees Assist the Director of Engineering and Management in planning for the investment, project and replacement budget on a yearly basis. Operations: Displays good teamwork. Recommends improvements in methods, systems and procedures to improve efficiency and maximize customer satisfaction. Be willing to train and instruct other members of the staff by passing along knowledge and skills. Perform as per OSM Standards and in line with company s Values and Core Behaviour. Attends training classes as per schedule Ensure all relevant checklists are completed as required. To have a complete understanding of and to adhere to M venpick Hotels &amp; Resorts policy relating to Fire, Hygiene, Health and Safety. Schedules active maintenance with engineering team to ensure work is complete, and then communicates details with the Engineering Supervisor. Ensure all work orders are acknowledged in the Dyna Win system. To carry out any other reasonable duties and responsibilities as assigned. Administration: Provide and follow up on the Engineering Supervisor on planned preventive maintenance (PPM) schedules for implementation Analyze the behaviour of the plants with respect to the set point and setting up the various control parameters Perform daily auditing of plant performance via the building management system (BMS) e.g. data logging, plant review, alarm manager status, etc. Analyze reasons of failure of plants and provides specific diagnostic, problem analysis and specify the necessary remedial actions for the Engineering Supervisor's approval Use the historical logged data of various plants to review the system and propose improvements in order to enhance the system efficiency and / or reduce the operation cost as well as improve the services provided to guest Program the BMS and PPM system and other plants (e.g. standby power generator, diesel driven firefighting pump, fire alarm system, etc.) for automatic periodic testing Follow the grooming standards and maintain a friendly and cheerful disposition all the times To comply with all hotel rules and regulations as outlined in the staff handbook To anticipate the needs of the guest whenever possible, to enhance quality service and in turn enhance guest satisfaction. Ensure all filing systems are accurate and up to date Provide administration support to the Engineering Team Assist with the completion of the Department vacation plan and any associated HR paperwork. To give full co-operation to any colleague requiring assistance in a prompt caring and helpful manner. To be flexible in assisting in other areas of the Hotel in response to the business and guest needs Is familiar with all related company documentation and especially with the relevant Operational Standards Manual for his/her field of responsibility.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education: Mechanic or Electric College/University education. (preferred but not required) Experience: Minimum 3 years Other: Computer skills.</p><p></p></section>

<p><h4>Company description</h4> <p>Why work for Accor?<br> We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.<br> By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality.<br> Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS</p> <h4>Job description</h4> <p>You perform highly diversified duties to install, troubleshoot, repair and maintain the property’s facilities and equipment to ensure a safe and functional environment for the guests.</p> <h4>What is in it for you:</h4> <ul> <li>Employee benefit card offering discounted rates in Accor worldwide</li> <li>Learning programs through our Academies</li> <li>Opportunity to develop your talent and grow within your property and across the world</li> <li>Ability to make a difference through our Corporate Social Responsibility activities, like Planet 21</li> </ul> <h4>What you will be doing:</h4> <ul> <li>Takes prompt action relating to all maintenance orders concerning all plumbing services in the guest rooms, kitchen, health club, toilets, plant-rooms, swimming pool, all staff and guest locker rooms and all related areas</li> <li>Performs preventive maintenance works on all plumbing lines and sanitary fixtures as per the annual maintenance chart</li> <li>Notes all required spare parts and consumable material and instructs the storekeeper of the requirements</li> <li>With the help of the checklist, inspects the hotel on daily basis for any defects on the plumbing services and sanitary fixtures and takes prompt action to rectify the defects</li> <li>Takes the responsibilities of the pool attendant</li> <li>Takes regular readings on water and gas consumption and records it on the energy consumption record charts</li> </ul> <h4>Your experience and skills include:</h4> <ul> <li>Relevant building maintenance experience is an asset</li> <li>Strong interpersonal and problem solving abilities</li> <li>Highly responsible and reliable</li> </ul> <h4>Your team and working environment:</h4> <ul> <li>Member of the fire team</li> <li>Assists the general mechanic, boiler-man and refrigeration technician whenever required</li> <li>To report for duty punctually wearing the correct uniform and name badge at all times</li> <li>To provide courteous and professional service at all times</li> </ul> <h4>Our commitment to diversity & inclusion:</h4> <p>We are an inclusive company and our ambition is to attract, recruit and promote diverse talent.</p> <p>Why work for Accor?<br> We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.<br> By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality.<br> Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS</p></p><p></p>

<p><h4>Company description</h4> <p>Why work for Accor?<br> We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.<br> By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality.<br> Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS</p> <h4>Job description</h4> <p>You perform highly diversified duties to install, troubleshoot, repair and maintain the property’s facilities and equipment to ensure a safe and functional environment for the guests.</p> <h4>What is in it for you:</h4> <ul> <li>Employee benefit card offering discounted rates in Accor worldwide</li> <li>Learning programs through our Academies</li> <li>Opportunity to develop your talent and grow within your property and across the world</li> <li>Ability to make a difference through our Corporate Social Responsibility activities, like Planet 21</li> </ul> <h4>What you will be doing:</h4> <ul> <li>Takes prompt action relating to all maintenance orders concerning all plumbing services in the guest rooms, kitchen, health club, toilets, plant-rooms, swimming pool, all staff and guest locker rooms and all related areas</li> <li>Performs preventive maintenance works on all plumbing lines and sanitary fixtures as per the annual maintenance chart</li> <li>Notes all required spare parts and consumable material and instructs the storekeeper of the requirements</li> <li>With the help of the checklist, inspects the hotel on daily basis for any defects on the plumbing services and sanitary fixtures and takes prompt action to rectify the defects</li> <li>Takes the responsibilities of the pool attendant</li> <li>Takes regular readings on water and gas consumption and records it on the energy consumption record charts</li> </ul> <h4>Your experience and skills include:</h4> <ul> <li>Relevant building maintenance experience is an asset</li> <li>Strong interpersonal and problem solving abilities</li> <li>Highly responsible and reliable</li> </ul> <h4>Your team and working environment:</h4> <ul> <li>Member of the fire team</li> <li>Assists the general mechanic, boiler-man and refrigeration technician whenever required</li> <li>To report for duty punctually wearing the correct uniform and name badge at all times</li> <li>To provide courteous and professional service at all times</li> </ul> <h4>Our commitment to diversity & inclusion:</h4> <p>We are an inclusive company and our ambition is to attract, recruit and promote diverse talent.</p> <p>Why work for Accor?<br> We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.<br> By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality.<br> Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS</p></p><p></p>

<p><h4>Company description</h4> <p>Why work for Accor?<br> We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.<br> By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality.<br> Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS</p> <h4>Job description</h4> <h4>The role</h4> <p>To supervise and control the operation of the building management system and monitor all plant activities of the headquarters building services.<br> To provide accurate administration support to the engineering team.<br> To interact with housekeeping and front office team to ensure our guests receive a high level of service.<br> To provide service that is sincere, warm and enthusiastic whilst ensuring guest satisfaction.</p> <h4>Key deliverables and responsibilities</h4> <h4>Planning & organizing:</h4> <ul> <li>Is aware of the daily activities and has product knowledge of all the hotel facilities.</li> <li>To be punctual on duty and ensure the same of your employees.</li> <li>Assist the director of engineering and management in planning for the investment, project and replacement budget on a yearly basis.</li> </ul> <h4>Operations:</h4> <ul> <li>Displays good teamwork.</li> <li>Recommends improvements in methods, systems and procedures to improve efficiency and maximize customer satisfaction.</li> <li>Be willing to train and instruct other members of the staff by passing along knowledge and skills.</li> <li>Perform as per operational standards manual (OSM) and in line with company’s values and core behaviour.</li> <li>Attends training classes as per schedule.</li> <li>Ensure all relevant checklists are completed as required.</li> <li>To have a complete understanding of and to adhere to Mövenpick Hotels & Resorts policy relating to fire, hygiene, health and safety.</li> <li>Schedules active maintenance with engineering team to ensure work is complete, and then communicates details with the engineering supervisor.</li> <li>Ensure all work orders are acknowledged in the Dyna Win system.</li> <li>To carry out any other reasonable duties and responsibilities as assigned.</li> </ul> <h4>Administration:</h4> <ul> <li>Provide and follow up on the engineering supervisor on planned preventive maintenance (PPM) schedules for implementation.</li> <li>Analyze the behaviour of the plants with respect to the set point and set up the various control parameters.</li> <li>Perform daily auditing of plant performance via the building management system (BMS) e.g. data logging, plant review, alarm manager status, etc.</li> <li>Analyze reasons of failure of plants and provide specific diagnostic, problem analysis and specify the necessary remedial actions for the engineering supervisor's approval.</li> <li>Use the historical logged data of various plants to review the system and propose improvements in order to enhance system efficiency and/or reduce operation cost as well as improve the services provided to guests.</li> <li>Program the BMS and PPM system and other plants (e.g. standby power generator, diesel driven firefighting pump, fire alarm system, etc.) for automatic periodic testing.</li> <li>Follow the grooming standards and maintain a friendly and cheerful disposition at all times.</li> <li>To comply with all hotel rules and regulations as outlined in the staff handbook.</li> <li>To anticipate the needs of the guest whenever possible, to enhance quality service and in turn enhance guest satisfaction.</li> <li>Ensure all filing systems are accurate and up to date.</li> <li>Provide administration support to the engineering team.</li> <li>Assist with the completion of the department vacation plan and any associated HR paperwork.</li> <li>To give full co-operation to any colleague requiring assistance in a prompt, caring and helpful manner. To be flexible in assisting in other areas of the hotel in response to business and guest needs.</li> <li>Is familiar with all related company documentation and especially with the relevant operational standards manual for his/her field of responsibility.</li> </ul> <h4>Qualifications</h4> <ul> <li><strong>Education:</strong> Mechanic or electric college/university education (preferred but not required).</li> <li><strong>Experience:</strong> Minimum 3 years.</li> <li><strong>Other:</strong> Computer skills.</li> </ul> <h4>Additional information</h4> <p>Mövenpick Hotels & Resorts is in the “moments” business. We’re intimately involved in important times in our guest’s lives. And you never know when a moment can be made. A simple smile in the lobby can create the positivity that turns a business trip into a new business celebration. An insider tip on the best way to spend a day can make an entire holiday. A romantic dinner for two can lead to a longer term partnership.<br> We understand that this vision cannot be achieved without great people who create and support work environments designed to produce exceptional results.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Date Posted:</b></p><br><br>2026-07-08&amp;#xa;&amp;#xa;<p><b>Country:</b></p><br><br>Jordan&amp;#xa;&amp;#xa;<p><b>Location:</b></p><br><br>JO-AM-AMMAN-183 ~ 183 Saqra Complex A ~ ARMADA TWR, Armada Tower, Arar Mustafa Wahbi Al Tal St., 1st Floor, Office 204 (External Site)&amp;#xa;&amp;#xa;<p><b>Position Role Type:</b></p><br><br>Unspecified<br><br><p>The Pratt &amp; Whitney Customer Business organization has an exciting opportunity for a Field Service Representative (FSR) located at our Amman, Jordan field service office serving our customer Royal Jordanian and other regional customers. This position provides on-wing support for our customer and requires both technical expertise and the ability to build strong customer relationships. We are searching for a highly motivated and qualified individual to bolster the world class customer support we currently provide.</p><br><br><p>The position reports to the Customer Fleet Director, Middle East. This team interfaces with the customer powerplant engineering team, Customer Technical Service (CTS), and other responsible P&amp;W organizations to ensure customer operations are supported smoothly. This is accomplished by providing the customer with access to the right tools and organizations within Pratt &amp; Whitney for items such as engine troubleshooting, warranty claims, spare parts and repairs, spare engine allocations, MRO shops, and sales. The FSR also is the point of contact for internal departments to understand what is happening with the customer, using P&amp;W tools daily such as Engine Wise Connect, EData+, and MS Dynamics.</p><br><br><br><p><b>Key responsibilities: </b></p><br><br><p><i><u>Technical in nature</u></i></p><br><br><ul><li>Provide the assigned customer(s) with technical and operational program support for various engine groups. This individual will be responsible for coordinating and managing on-wing operational issues, customer concerns, and provide 24-hour comprehensive technical support and customer assistance. A solid working knowledge of aviation gas turbine engines, along with troubleshooting expertise, are the key responsibilities.</li><li>Team player, able to take and give direction to expeditiously solve Customer issues</li><li>Effectively communicate in real time, both clearly and concisely, and in all forms</li><li>Ability to collaborate with other Field Representatives to advance solutions</li><li>Contributes to the business by applying knowledge and skills in multiple functional areas</li><li>The individual is expected to always “go beyond”, as PW customers depend on this level of service to achieve mutual success</li></ul><p><i><u>Customer relationship</u></i></p><br><br><ul><li>Operator’s first contact to address all technical and business concerns. The individual must be able to work with a full spectrum of an airline company’s staff, interfacing frequently with all customer employees, from Executives to Line Technicians. The individual should be comfortable representing Pratt &amp; Whitney at key customer meetings.</li></ul><p><i><u>Ability to work independently</u></i></p><br><br><ul><li>This position requires 24/7 accessibility for the customer and will rely heavily on troubleshooting abilities with minimal supervision. Candidate must also collaborate with the P&amp;W Hartford CFTs, CTS, and P&amp;W colleagues to provide real time information to understand fleet risk. A successful candidate for this role needs to maintain a positive, empathetic, and engaging professional attitude toward customers and colleagues always.</li></ul><br><p><b><u>Experience/Qualifications</u></b></p><br><br><p><i><u>Basic Qualifications:</u></i></p><br><br><ul><li>Demonstrated technical proficiency with jet engine technical data</li><li>Associate’s degree in aviation related field, with aminimum 7 years of experience with commercial / military aircraft engines and directly working with / for airline customers, OR</li><li>Bachelor’s degree in engineering or aviation related field or equivalent, with a minimum of 5 years of experience with maintaining commercial / military aircraft engines and directly working with/for airline customers,&nbsp;OR</li><li>A master’s degree with 3 years of experience with maintaining commercial aircraft engines and directly working with / for airline customers</li><li>Experience in an external facing role</li><li>Demonstrated written and verbal communication skills</li></ul><p><i><u>Preferred Qualifications a plus: </u></i></p><br><br><ul><li>Familiarity with Airbus A320 aircraft manuals and OEM engine manuals</li><li>Familiarity with P&amp;W Geared Turbofan engine</li><li>Previously held part 147 aviation maintenance A&amp;P license or similar aircraft engine mechanic experience</li></ul><br><p>This position is located onsite at a P&amp;W customer location. The candidate must be Jordanian national and not requiring any work authorization. Travel up to 20%. After hours onsite support may be required to support airline maintenance windows. The FSR is typically on call outside of core business hours with the support of P&amp;W help desk, CTS, and the Customer Fleet Director.</p><br><br><br><p><b>Privacy Policy and Terms:</b></p><br><br><p>Click on this link to read the Policy and Terms</p><br><br><br><br><p><span><i>RTX adheres to the principles of equal employment. All qualified applications will be given careful consideration without regard to ethnicity, color, religion, gender, sexual orientation or identity, national origin, age, disability, protected veteran status or any other characteristic protected by law. </i> </span></p><br><br><br><br><p><b>Privacy Policy and Terms:</b></p><br><br><p><span>Click on this </span>link<span> to read the Policy and Terms</span></p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Date Posted:</b></p><br><br>2026-07-08&amp;#xa;&amp;#xa;<p><b>Country:</b></p><br><br>Jordan&amp;#xa;&amp;#xa;<p><b>Location:</b></p><br><br>JO-AM-AMMAN-183 ~ 183 Saqra Complex A ~ ARMADA TWR, Armada Tower, Arar Mustafa Wahbi Al Tal St., 1st Floor, Office 204 (External Site)&amp;#xa;&amp;#xa;<p><b>Position Role Type:</b></p><br><br>Unspecified<br><br><p>The Pratt &amp; Whitney Customer Business organization has an exciting opportunity for a Field Service Representative (FSR) located at our Amman, Jordan field service office serving our customer Royal Jordanian and other regional customers. This position provides on-wing support for our customer and requires both technical expertise and the ability to build strong customer relationships. We are searching for a highly motivated and qualified individual to bolster the world class customer support we currently provide.</p><br><br><p>The position reports to the Customer Fleet Director, Middle East. This team interfaces with the customer powerplant engineering team, Customer Technical Service (CTS), and other responsible P&amp;W organizations to ensure customer operations are supported smoothly. This is accomplished by providing the customer with access to the right tools and organizations within Pratt &amp; Whitney for items such as engine troubleshooting, warranty claims, spare parts and repairs, spare engine allocations, MRO shops, and sales. The FSR also is the point of contact for internal departments to understand what is happening with the customer, using P&amp;W tools daily such as Engine Wise Connect, EData+, and MS Dynamics.</p><br><br><br><p><b>Key responsibilities: </b></p><br><br><p><i><u>Technical in nature</u></i></p><br><br><ul><li>Provide the assigned customer(s) with technical and operational program support for various engine groups. This individual will be responsible for coordinating and managing on-wing operational issues, customer concerns, and provide 24-hour comprehensive technical support and customer assistance. A solid working knowledge of aviation gas turbine engines, along with troubleshooting expertise, are the key responsibilities.</li><li>Team player, able to take and give direction to expeditiously solve Customer issues</li><li>Effectively communicate in real time, both clearly and concisely, and in all forms</li><li>Ability to collaborate with other Field Representatives to advance solutions</li><li>Contributes to the business by applying knowledge and skills in multiple functional areas</li><li>The individual is expected to always “go beyond”, as PW customers depend on this level of service to achieve mutual success</li></ul><p><i><u>Customer relationship</u></i></p><br><br><ul><li>Operator’s first contact to address all technical and business concerns. The individual must be able to work with a full spectrum of an airline company’s staff, interfacing frequently with all customer employees, from Executives to Line Technicians. The individual should be comfortable representing Pratt &amp; Whitney at key customer meetings.</li></ul><p><i><u>Ability to work independently</u></i></p><br><br><ul><li>This position requires 24/7 accessibility for the customer and will rely heavily on troubleshooting abilities with minimal supervision. Candidate must also collaborate with the P&amp;W Hartford CFTs, CTS, and P&amp;W colleagues to provide real time information to understand fleet risk. A successful candidate for this role needs to maintain a positive, empathetic, and engaging professional attitude toward customers and colleagues always.</li></ul><br><p><b><u>Experience/Qualifications</u></b></p><br><br><p><i><u>Basic Qualifications:</u></i></p><br><br><ul><li>Demonstrated technical proficiency with jet engine technical data</li><li>Associate’s degree in aviation related field, with aminimum 7 years of experience with commercial / military aircraft engines and directly working with / for airline customers, OR</li><li>Bachelor’s degree in engineering or aviation related field or equivalent, with a minimum of 5 years of experience with maintaining commercial / military aircraft engines and directly working with/for airline customers,&nbsp;OR</li><li>A master’s degree with 3 years of experience with maintaining commercial aircraft engines and directly working with / for airline customers</li><li>Experience in an external facing role</li><li>Demonstrated written and verbal communication skills</li></ul><p><i><u>Preferred Qualifications a plus: </u></i></p><br><br><ul><li>Familiarity with Airbus A320 aircraft manuals and OEM engine manuals</li><li>Familiarity with P&amp;W Geared Turbofan engine</li><li>Previously held part 147 aviation maintenance A&amp;P license or similar aircraft engine mechanic experience</li></ul><br><p>This position is located onsite at a P&amp;W customer location. The candidate must be Jordanian national and not requiring any work authorization. Travel up to 20%. After hours onsite support may be required to support airline maintenance windows. The FSR is typically on call outside of core business hours with the support of P&amp;W help desk, CTS, and the Customer Fleet Director.</p><br><br><br><p><b>Privacy Policy and Terms:</b></p><br><br><p>Click on this link to read the Policy and Terms</p><br><br><br><br><p><span><i>RTX adheres to the principles of equal employment. All qualified applications will be given careful consideration without regard to ethnicity, color, religion, gender, sexual orientation or identity, national origin, age, disability, protected veteran status or any other characteristic protected by law. </i> </span></p><br><br><br><br><p><b>Privacy Policy and Terms:</b></p><br><br><p><span>Click on this </span>link<span> to read the Policy and Terms</span></p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Company Description<br><br><p>"Why work for Accor?<br>We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.<br>By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality. Discover the life that awaits you at Accor, visit https://careers.accor.com/<br>Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS"</p><br><br>Job Description<br><br><p>The Role</p><br><ul><li>To supervise and control the operation of the building management system and monitor all plant activities of the headquarters building services.</li><li>To provide accurate administration support to the Engineering Team</li><li>To interact with Housekeeping, Front Office Team to ensure our guests receives high level of service.</li><li>To provide service that is sincere, warm and enthusiastic whilst ensuring the guest satisfaction.</li></ul><p>Key Deliverables and Responsibilities</p><br><p>Planning &amp; Organizing:</p><br><ol><li>Is aware of the daily activities and has product knowledge of all the hotel facilities</li><li>To be punctual on duty and ensure the same of your employees</li><li>Assist the Director of Engineering and Management in planning for the investment, project and replacement budget on a yearly basis.</li></ol><p>Operations:</p><br><ol><li>Displays good teamwork.</li><li>Recommends improvements in methods, systems and procedures to improve efficiency and maximize customer satisfaction.</li><li>Be willing to train and instruct other members of the staff by passing along knowledge and skills.</li><li>Perform as per OSM Standards and in line with company’s Values and Core Behaviour.</li><li>Attends training classes as per schedule</li><li>Ensure all relevant checklists are completed as required.</li><li>To have a complete understanding of and to adhere to Mövenpick Hotels &amp; Resorts policy relating to Fire, Hygiene, Health and Safety.</li><li>Schedules active maintenance with engineering team to ensure work is complete, and then communicates details with the Engineering Supervisor.</li><li>Ensure all work orders are acknowledged in the Dyna Win system.</li><li>To carry out any other reasonable duties and responsibilities as assigned.</li></ol><p>Administration:</p><br><ol><li>Provide and follow up on the Engineering Supervisor on planned preventive maintenance (PPM) schedules for implementation</li><li>Analyze the behaviour of the plants with respect to the set point and setting up the various control parameters</li><li>Perform daily auditing of plant performance via the building management system (BMS) e.g. data logging, plant review, alarm manager status, etc.</li><li>Analyze reasons of failure of plants and provides specific diagnostic, problem analysis and specify the necessary remedial actions for the Engineering Supervisor's approval</li><li>Use the historical logged data of various plants to review the system and propose improvements in order to enhance the system efficiency and / or reduce the operation cost as well as improve the services provided to guest</li><li>Program the BMS and PPM system and other plants (e.g. standby power generator, diesel driven firefighting pump, fire alarm system, etc.) for automatic periodic testing</li><li>Follow the grooming standards and maintain a friendly and cheerful disposition all the times</li><li>To comply with all hotel rules and regulations as outlined in the staff handbook</li><li>To anticipate the needs of the guest whenever possible, to enhance quality service and in turn enhance guest satisfaction.</li><li>Ensure all filing systems are accurate and up to date</li><li>Provide administration support to the Engineering Team</li><li>Assist with the completion of the Department vacation plan and any associated HR paperwork.</li><li>To give full co-operation to any colleague requiring assistance in a prompt caring and helpful manner. To be flexible in assisting in other areas of the Hotel in response to the business and guest needs</li><li>Is familiar with all related company documentation and especially with the relevant <em>Operational Standards Manual </em>for his/her field of responsibility.</li></ol><br>Qualifications<br><br><p><strong>Education:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </strong>Mechanic or Electric College/University education. (preferred but not</p><br><p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; required)</p><br><p><strong>Experience:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </strong>Minimum 3 years</p><br><p><strong>Other:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </strong>Computer skills.</p><br><br>Additional Information<br><br><p>Mövenpick Hotels &amp; Resorts is in the “moments” business. We’re intimately involved in important times in our guest’s lives. And you never know when a moment can be made. A simple smile in the lobby can create the positivity that turns a business trip into a new business celebration. An insider tip on the best way to spend a day can make an entire holiday. A romantic dinner for two can lead to a longer term partnership.</p><br><p>We understand that this vision cannot be achieved without great people who create and support work environments designed to produce exceptional results.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Purpose of the Job <br></span><p><span><span><span><span><span>The Contact Center Executive at Aramex will be responsible for delivering exceptional customer service by managing customer inquiries, resolving issues, and providing information about products or services. This role plays a critical part in ensuring customer satisfaction and loyalty through efficient communication and problem-solving.</span></span></span></span></span></p><br><br> <br>Job Description <br><ul> <li><span><span><span>Provide personalized customer service by responding to the needs of each customer </span></span></span></li> <li><span><span><span>Log shipment collection requests.</span></span></span></li> <li><span><span><span>Track customers’ shipments to answer customer’s inquiries for updates on products as Express, Domestic, Shop &amp; Ship and personalized</span></span></span></li> <li><span><span><span>Handle and resolve customers’ complaints and root certain issues and inquiries which are not under the contact center scope of responsibility to the concerned departments/CMTs. </span></span></span></li> <li><span><span><span>Provides products and service information to customers as needed. </span></span></span></li> <li><span><span><span>Answer customers’ general inquiries.</span></span></span></li> <li><span><span><span>Initiate telephone calls with the customers to gather initial information about location/address and preferred timing for shipment delivery.</span></span></span></li> <li><span><span><span>Verify information, in case of multiple delivery for same customer. </span></span></span></li> <li><span><span><span>Answer customers’ incoming calls to acquire locations for personalized shipments</span></span></span></li> <li><span><span><span>Act as an inbound executive by answering Customers’ calls in case of customers’ complaints related to a non-delivered or delayed shipment, or any inquiries related to general or personalized service or products. </span></span></span></li> <li><span><span><span>Manage customers’ expectation in the most professional customer-centric manner.</span></span></span></li> <li><span><span><span>Provide tailored customer service and respond to the needs of each customer as service/deliveries are personalized per customer.</span></span></span></li> </ul> <br>Job Requirements - Experience and Education <br><ul> <li><span><span>Bachelor’s degree or equivalent experience in customer service or a related field.</span></span></li> <li><span><span>1-2 Years Experience in customer service or call center role.</span></span></li> </ul> <ul> <li><span><span><span>Proficient with contact center systems (CRM tools, ticketing systems, etc.) and basic office software (MS Office). Flexible with all shifts</span></span></span></li> <li><span><span><span>Previous experience handling customers’ inquiry via phone, email or live chat is preferred.</span></span></span></li> </ul> <br>Leadership Behaviors <br>Building Outstanding Teams<br>Collaborate &amp; break silos<br>Execution &amp; Accountability<br>External focus<br>Growth mindset<br>Inclusion<br>Innovation<br>Setting a clear direction<br>Simplification<br>Skills <br>Communication Skills<br>Customer Centric<br>Decision Making<br>Problem Solving<br>Team Collaboration<br>Time Management<br> </div>

<p><h4>Company description</h4> <p>Why work for Accor?<br> We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.<br> By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality.<br> Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS</p> <h4>Job description</h4> <h4>The role</h4> <p>To supervise and control the operation of the building management system and monitor all plant activities of the headquarters building services.<br> To provide accurate administration support to the engineering team.<br> To interact with housekeeping and front office team to ensure our guests receive a high level of service.<br> To provide service that is sincere, warm and enthusiastic whilst ensuring guest satisfaction.</p> <h4>Key deliverables and responsibilities</h4> <h4>Planning & organizing:</h4> <ul> <li>Is aware of the daily activities and has product knowledge of all the hotel facilities.</li> <li>To be punctual on duty and ensure the same of your employees.</li> <li>Assist the director of engineering and management in planning for the investment, project and replacement budget on a yearly basis.</li> </ul> <h4>Operations:</h4> <ul> <li>Displays good teamwork.</li> <li>Recommends improvements in methods, systems and procedures to improve efficiency and maximize customer satisfaction.</li> <li>Be willing to train and instruct other members of the staff by passing along knowledge and skills.</li> <li>Perform as per operational standards manual (OSM) and in line with company’s values and core behaviour.</li> <li>Attends training classes as per schedule.</li> <li>Ensure all relevant checklists are completed as required.</li> <li>To have a complete understanding of and to adhere to Mövenpick Hotels & Resorts policy relating to fire, hygiene, health and safety.</li> <li>Schedules active maintenance with engineering team to ensure work is complete, and then communicates details with the engineering supervisor.</li> <li>Ensure all work orders are acknowledged in the Dyna Win system.</li> <li>To carry out any other reasonable duties and responsibilities as assigned.</li> </ul> <h4>Administration:</h4> <ul> <li>Provide and follow up on the engineering supervisor on planned preventive maintenance (PPM) schedules for implementation.</li> <li>Analyze the behaviour of the plants with respect to the set point and set up the various control parameters.</li> <li>Perform daily auditing of plant performance via the building management system (BMS) e.g. data logging, plant review, alarm manager status, etc.</li> <li>Analyze reasons of failure of plants and provide specific diagnostic, problem analysis and specify the necessary remedial actions for the engineering supervisor's approval.</li> <li>Use the historical logged data of various plants to review the system and propose improvements in order to enhance system efficiency and/or reduce operation cost as well as improve the services provided to guests.</li> <li>Program the BMS and PPM system and other plants (e.g. standby power generator, diesel driven firefighting pump, fire alarm system, etc.) for automatic periodic testing.</li> <li>Follow the grooming standards and maintain a friendly and cheerful disposition at all times.</li> <li>To comply with all hotel rules and regulations as outlined in the staff handbook.</li> <li>To anticipate the needs of the guest whenever possible, to enhance quality service and in turn enhance guest satisfaction.</li> <li>Ensure all filing systems are accurate and up to date.</li> <li>Provide administration support to the engineering team.</li> <li>Assist with the completion of the department vacation plan and any associated HR paperwork.</li> <li>To give full co-operation to any colleague requiring assistance in a prompt, caring and helpful manner. To be flexible in assisting in other areas of the hotel in response to business and guest needs.</li> <li>Is familiar with all related company documentation and especially with the relevant operational standards manual for his/her field of responsibility.</li> </ul> <h4>Qualifications</h4> <ul> <li><strong>Education:</strong> Mechanic or electric college/university education (preferred but not required).</li> <li><strong>Experience:</strong> Minimum 3 years.</li> <li><strong>Other:</strong> Computer skills.</li> </ul> <h4>Additional information</h4> <p>Mövenpick Hotels & Resorts is in the “moments” business. We’re intimately involved in important times in our guest’s lives. And you never know when a moment can be made. A simple smile in the lobby can create the positivity that turns a business trip into a new business celebration. An insider tip on the best way to spend a day can make an entire holiday. A romantic dinner for two can lead to a longer term partnership.<br> We understand that this vision cannot be achieved without great people who create and support work environments designed to produce exceptional results.</p></p><p></p>

<p><h4>Description</h4> <p>We're hiring an AI agent designer to build, prompt-engineer, and continuously improve the AI agents that power OpenCX. You'll work directly with customers and our product team to translate real customer use cases into agent behavior that just works — designing conversation flows, writing and iterating on prompts, and measuring agent performance against real customer outcomes.</p> <p>You'll develop deep expertise in the platform and the underlying LLMs we use, and partner with the product engineering team to push the boundaries of what our agents can do. Prompt engineering is the core of this role — you'll be writing, testing, and iterating on prompts daily, while constantly tuning agents based on real-world customer feedback.</p> <p>The scope of agents you'll own and the depth of prompt iteration you'll drive will scale with your experience and ability to ship.</p> <p>This is a hands-on AI/prompt engineering role with heavy customer exposure — not pure internal R&D, and not pure support.</p> <h4>What you'll do</h4> <ul> <li>Design and build new AI agents end-to-end: define behavior, write the prompts, set up tool/function calls, and ship to customers.</li> <li>Iterate on prompts based on real customer conversations and edge cases — measuring quality, latency, and accuracy.</li> <li>Work directly with customers to understand their use cases, then translate them into agent behavior that just works.</li> <li>Run experiments across models, prompt structures, and agent architectures to push performance higher.</li> <li>Collaborate closely with the product engineering team: feed real customer needs back into platform improvements.</li> <li>Build deep expertise in our agent stack — LLMs, tools, evaluations — so you can advise customers on what's possible.</li> <li>Document agent design patterns, prompt templates, and evaluation playbooks to strengthen internal and customer resources.</li> </ul> <h4>Requirements</h4> <ul> <li>Hands-on experience with prompt engineering and AI agents — you've built, tuned, and shipped LLM-powered features.</li> <li>Strong technical foundation — you can read code, work with APIs, and run evaluations to measure agent quality.</li> <li>Solid understanding of how modern LLMs behave, where they fail, and how to design prompts and tools to make them reliable.</li> <li>Customer-facing experience or strong willingness to engage directly with customers to learn their use cases.</li> <li>Excellent English communication skills — clear writing and confident speaking on video calls with enterprise stakeholders.</li> <li>Ability to operate effectively in a fast-moving startup: you prioritize speed, customer impact, and getting things done.</li> <li>Comfortable working remotely with customers across multiple global time zones.</li> </ul> <h4>Benefits</h4> <ul> <li>Top of the market compensation</li> <li>Health insurance</li> <li>Working at a high-growth, YC-backed startup</li> </ul></p><p></p>

<p><h4>Description</h4> <p>We're hiring an AI agent designer to build, prompt-engineer, and continuously improve the AI agents that power OpenCX. You'll work directly with customers and our product team to translate real customer use cases into agent behavior that just works — designing conversation flows, writing and iterating on prompts, and measuring agent performance against real customer outcomes.</p> <p>You'll develop deep expertise in the platform and the underlying LLMs we use, and partner with the product engineering team to push the boundaries of what our agents can do. Prompt engineering is the core of this role — you'll be writing, testing, and iterating on prompts daily, while constantly tuning agents based on real-world customer feedback.</p> <p>The scope of agents you'll own and the depth of prompt iteration you'll drive will scale with your experience and ability to ship.</p> <p>This is a hands-on AI/prompt engineering role with heavy customer exposure — not pure internal R&D, and not pure support.</p> <h4>What you'll do</h4> <ul> <li>Design and build new AI agents end-to-end: define behavior, write the prompts, set up tool/function calls, and ship to customers.</li> <li>Iterate on prompts based on real customer conversations and edge cases — measuring quality, latency, and accuracy.</li> <li>Work directly with customers to understand their use cases, then translate them into agent behavior that just works.</li> <li>Run experiments across models, prompt structures, and agent architectures to push performance higher.</li> <li>Collaborate closely with the product engineering team: feed real customer needs back into platform improvements.</li> <li>Build deep expertise in our agent stack — LLMs, tools, evaluations — so you can advise customers on what's possible.</li> <li>Document agent design patterns, prompt templates, and evaluation playbooks to strengthen internal and customer resources.</li> </ul> <h4>Requirements</h4> <ul> <li>Hands-on experience with prompt engineering and AI agents — you've built, tuned, and shipped LLM-powered features.</li> <li>Strong technical foundation — you can read code, work with APIs, and run evaluations to measure agent quality.</li> <li>Solid understanding of how modern LLMs behave, where they fail, and how to design prompts and tools to make them reliable.</li> <li>Customer-facing experience or strong willingness to engage directly with customers to learn their use cases.</li> <li>Excellent English communication skills — clear writing and confident speaking on video calls with enterprise stakeholders.</li> <li>Ability to operate effectively in a fast-moving startup: you prioritize speed, customer impact, and getting things done.</li> <li>Comfortable working remotely with customers across multiple global time zones.</li> </ul> <h4>Benefits</h4> <ul> <li>Top of the market compensation</li> <li>Health insurance</li> <li>Working at a high-growth, YC-backed startup</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul> <li> <p>Design, develop, and maintain high-quality Android applications using <strong>Kotlin</strong>.</p> </li> <li> <p>Manage full release cycles: from feature development to Play Store submissions, versioning, and monitoring post-release performance.</p> </li> <li> <p>Integrate and manage third-party SDKs and REST APIs to power core app functionality.</p> </li> <li> <p>Collaborate closely with product and design stakeholders to translate user needs into smooth, intuitive experiences.</p> </li> <li> <p>Proactively suggest improvements that enhance user retention and satisfaction.</p> </li> <li> <p>Troubleshoot, optimize, and debug to maintain excellent app performance and reliability.</p> </li> <li> <p>Ship fast while balancing speed with quality.</p> </li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p> <strong>Required:</strong> </p> <ul> <li> <p> <strong>2+ years</strong> of hands-on experience building and shipping production Android apps using <strong>Kotlin</strong>.</p> </li> <li> <p>Strong experience with <strong>Google Play Store</strong> processes submissions, versioning, release management, and app updates.</p> </li> <li> <p>Solid understanding of REST APIs and experience integrating various third-party SDKs.</p> </li> <li> <p> <strong>Product mindset</strong>: You think about the end user first and care about the overall experience, not just clean code.</p></li> <li> <p>Ability to work <strong>independently</strong> with minimal direction and deliver results in a fast-paced environment.</p> </li> <li> <p>Bias for action you prefer <strong>shipping</strong> over over-engineering.</p> </li> <li> <p> <strong>Fluent in both English and Arabic</strong> (essential for stakeholder communication and regional market focus).</p> </li> </ul> <p> <strong>Nice to Have:</strong> </p> <ul> <li> <p>Experience with consumer apps in <strong>rewards, loyalty programs, or fintech</strong>.</p> </li> <li> <p>Familiarity with <strong>Firebase</strong>, push notification systems, and user engagement / analytics tooling.</p> </li> </ul><p></p></section>

<p>Something is being built at CRD. We invite you to build its engine.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>EXPERIENCE:</strong> A track record of pipelines and automations running in production: Power Automate, n8n, Python, or the tool that fits. Practical application of LLMs to real workflows: quality assurance, document generation, analysis.</p><p><strong>SKILLS:</strong> The ability to carry a loosely defined problem to a working, documented, reproducible system. Familiarity with survey data (Kobo/ODK) or the health and development sector is welcome, though not required.</p><p><strong>CHARACTER</strong> We look for builders who:</p><ul><li>Ship working systems, and improve them in motion</li><li>Document with care, for those who come after</li><li>Offer honest counsel, even when it is unwelcome</li><li>Find more satisfaction in a running pipeline than a polished slide</li></ul>