وظائف فني نحاس في الأردن

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will coordinate and supervise the work effort of assigned subordinate maintenance personnel in support of the unit s daily RPA maintenance operations. Member will perform and inspect organizational and intermediate level electronic maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply advanced technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.USAF equivalent position is Avionics Technician Craftsman.</p><p><b>Essential Responsibilities:</b></p><ul><li>Applies advanced technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities.</li><li>Requires an advanced understanding of the interrelationships of circuits and associated systems.</li><li>Exercises independent judgment and leadership in performing assigned tasks in conjunction with designated direction from Production Staff and/or Avionic Leads.</li><li>Uses common and complex test instruments in the performance of assigned duties.</li><li>Provides technical and directional leadership guidance to lower-level avionic technicians.</li><li>Provides training to lower-level Avionic Technicians.</li><li>Maintains, repairs, and installs various types of electronic equipment and related devices.</li><li>Applies advanced technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations.</li><li>Must be able to work without direct supervision.</li><li>Performs all other duties as assigned as requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of five years of actual Aircraft Avionics and GCS maintenance experience required.</li><li>Minimum of two years actual experience on MQ-9 aircraft and GCS, as an Avionics Technician.</li><li>Must have advanced knowledge of basic and complex electronics maintenance and repair.</li><li>Must have advanced knowledge of RFF systems, components, and accessories.</li><li>Must possess advanced knowledge of technical publications related to aircraft electronics maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.</li><li>Must be capable of using and reading blueprints, wiring diagrams, and data tables.</li><li>Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or before second deployment.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must have current/active State Issued Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications:</p><ul><li>Associate degree in a relevant career field.</li><li>Current IAT Level II Certification.</li><li>RPA Deployment Experience.</li><li>Prior experience as a Defense Contractor.</li><li>Avionics Technician experience within the last 10 years.</li></ul>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will coordinate and supervise the work effort of assigned subordinate maintenance personnel in support of the unit s daily RPA maintenance operations. Member will perform and inspect organizational and intermediate level electronic maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply advanced technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.USAF equivalent position is Avionics Technician Craftsman.</p><p><strong>Essential Responsibilities:</strong></p><ul><li>Applies advanced technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities.</li><li>Requires an advanced understanding of the interrelationships of circuits and associated systems.</li><li>Exercises independent judgment and leadership in performing assigned tasks in conjunction with designated direction from Production Staff and/or Avionic Leads.</li><li>Uses common and complex test instruments in the performance of assigned duties.</li><li>Provides technical and directional leadership guidance to lower-level avionic technicians.</li><li>Provides training to lower-level Avionic Technicians.</li><li>Maintains, repairs, and installs various types of electronic equipment and related devices.</li><li>Applies advanced technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations.</li><li>Must be able to work without direct supervision.</li><li>Performs all other duties as assigned as requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of five years of actual Aircraft Avionics and GCS maintenance experience required.</li><li>Minimum of two years actual experience on MQ-9 aircraft and GCS, as an Avionics Technician.</li><li>Must have advanced knowledge of basic and complex electronics maintenance and repair.</li><li>Must have advanced knowledge of RFF systems, components, and accessories.</li><li>Must possess advanced knowledge of technical publications related to aircraft electronics maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.</li><li>Must be capable of using and reading blueprints, wiring diagrams, and data tables.</li><li>Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or before second deployment.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must have current/active State Issued Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p><strong>Preferred Qualifications:</strong></p><ul><li>Associate degree in a relevant career field.</li><li>Current IAT Level II Certification.</li><li>RPA Deployment Experience.</li><li>Prior experience as a Defense Contractor.</li><li>Avionics Technician experience within the last 10 years.</li></ul>

<p><h4>Essential responsibilities:</h4> <p>The designee shall be qualified to install, sustain, troubleshoot, and repair standard ground radar and airfield systems and equipment platforms to include air traffic control radars and ground aircraft control and warning radar systems; air traffic control radios; meteorological and navigational aid systems.</p> <p>Resolves installation, repair, and modification problems associated with ATCALS and C2 equipment. Employs line-of-sight and tropospheric scatter techniques. Conducts tests to restore and maintain systems. Uses layout drawings, schematics, and pictorial diagrams to solve maintenance problems and ensure equipment is properly positioned. Analyzes construction and operating characteristics of equipment to determine source of malfunction. Performs intricate alignment and calibration procedures to ensure maximum operating efficiency.</p> <p>Reviews and ensures compliance with maintenance management publications and procedures. Enforces safety standards for system maintenance activities. Checks installed and repaired components for compliance with technical publications. Maintains inspection and maintenance records. Posts entries on maintenance and inspection records. Records meter readings and other pertinent data in equipment logs. Completes maintenance data collection forms. Requisitions, accounts for, and turns in supplies and material.</p> <p>The designee shall maintain systems such as DME, ILS, MMLS, MPN-23, UPS, RCSU-2238, TACAN, TRN-44, VOR, RSI/RCI or equivalent monitoring equipment, FMQ-19, FMQ-23, Micro-EARTS, Multi Source Correlator Tracker (MSCT), NRTD, STARS, STRAP, TDX-2000, MARK IVB, NEXION, Terminal Advisory System (TAS), GPN-27 (or 20), MPN-25, TPS-75, UPX-27, UPX-37, UPX-44A, CM-200, CM-300, GRC-171 & 211, GRR-23/24, PCAS, GRT-21/22, ETVS, Liberty Star, PL-2000DT, PRC-117, RT-1319, TRC-214, TRC-176, URC-200, ATIS, DVRS, TTRS, but not be limited to those listed in Table 4.5.2 ATCALS Systems and Associated Support Equipment; Table 4.5.3 ATC Weather Systems and Associated Support Equipment; Table 4.5.5 Regional Maintenance Center O&M and Support Equipment.</p> <h4>Minimum position knowledge, skills, and abilities required:</h4> <p>High school diploma or GED. Relevant associate’s degree preferred. Formal electronics training such as military technical training school, vocational college, and/or a four (4) year electronics apprentice program with experience in electronics equipment the technician will maintain. Maintaining COMSEC/IP networking equipment requires IAT Level II baseline certification in accordance with AFMAN 17-1303.</p> <p>Level I tech – four (4) years of recent, relevant, and practical experience with equipment the technician will maintain and oversee. Shall have four (4) years experience working with/on electronic systems.</p> <p>Ability to obtain and maintain a US CENTCOM medical exam.</p> <p>Must have or be able to obtain/maintain a US Government Secret Security Clearance. <strong>Note:</strong> US citizenship is required to obtain a Secret Clearance.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The After-Sales Service Manager is responsible for overseeing all service centre operations, warranty processes, customer support activities, spare parts management, and technical service performance. The role requires strong leadership skills, good English communication abilities, and the capability to coordinate with international suppliers and manufacturers to ensure high customer satisfaction and efficient service delivery.</p><p>Key Responsibilities</p><ul><li>Manage and oversee the daily operations of the service centre.</li><li>Supervise and evaluate a team of 6 service technicians.</li><li>Handle customer complaints and escalated service cases professionally and efficiently. Always prioritising customer satisfaction.</li><li>Communicate effectively with international manufacturers and suppliers regarding technical issues, warranty claims, and product support.</li><li>Manage and follow up on RMA (Return Merchandise Authorization) requests for spare parts and defective products.</li><li>Monitor warranty repairs and ensure compliance with company and supplier policies.</li><li>Ensure timely repair and servicing of TVs, electronic appliances, and related products.</li><li>Manage spare parts inventory and coordinate ordering requirements with suppliers.</li><li>Analyse recurring product failures and provide feedback to management and manufacturers.</li><li>Establish and monitor service KPIs such as repair turnaround time, first-time fix rate, customer satisfaction, and warranty costs.</li><li>Prepare reports on service centre performance, technician productivity, warranty claims, and customer feedback.</li><li>Coordinate with sales, logistics, warehouse, and technical departments to resolve service-related issues.</li><li>Develop and implement procedures to improve service quality and operational efficiency.</li><li>Ensure adherence to company policies, safety standards, and service procedures.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have experience within the consumer electronics industry.</li><li>Must have managed a service centre for 3-5 years at least.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Overview</strong><br><p><span>KEO is a creative enterprise, where innovation is a way of life. We are uniquely resourced with end-to-end services to take clients from inspiration – through conceptualization – to realization of planning, design or project delivery in the built and natural environments. For over 60 years we’ve led with vision, contributing to many of the world’s most ambitious projects, iconic places, remarkable experiences and prosperous communities.</span></p><br><p><span>As a highly integrated and agile AEP/PMCM firm, KEO is recognized by ENR as one of the Top 225 International Design Firms and one of the Top 20 International PM/CM Firms. We are also ranked by World Architecture as the 51st largest global architecture firm and the #1 Firm in the Middle East Region in their 2025 WA100 Survey.</span></p><br><p><span>We invite you to join us. Why?</span></p><br><p><span>When you join KEO, you’ll discover more than just a job – you’ll find a supportive environment that fosters your professional development through internal global mobility and career development and does so within a culture that supports company-wide health and well-being through on-demand counselling services and regular workplace clinics. You will be invited to celebrate community events such as sports days, fun-runs, in-house sports teams and beach clean ups. In addition to your competitive package and benefits you will have access to a suite of policies that include hybrid working arrangements, individual athletic sponsorship, study assistance sponsorship, employee referral rewards.</span></p><br> <br><strong>Responsibilities</strong><br><p><span><span>Our newest opportunity is for a talented <strong>CAD Technician</strong></span><span>&nbsp;to join our award-winning team based in <strong>Amman, Jordan</strong></span>.</span></p><br><p><span>This position will be within the Waste Management and Environmental team, developing and preparing drawings in CAD format (also including Civil 3D) for various different components, including waste management infrastructure layouts, waste transfer routing, earthworks and details related to landfill and lagoon design. Experience in using GIS software will also be considered an advantage to support the wider team.</span></p><br><p><span>We envisage success in this role to include;</span></p><br><ul><li><span>Producing technical drawings related to waste management infrastructure, including landfills, transfer stations, waste storage rooms, etc.</span></li><li><span>Producing profiles and 3D models for earthworks designs (related to landfills).</span></li><li><span>Liaising with Engineers about the information required, the coordination between different disciplines and project progress.</span></li><li><span>Collaborating and coordinating with other disciplines to achieve a fully integrated design.</span></li><li><span>Converting concepts and sketches into engineering drawings based on the project requirements.</span></li><li><span>Developing workflows and templates for various stages in design and submissions.</span></li><li><span>Developing and maintaining a library of standard details for use in various design drawings (related to waste management infrastructure). </span></li><li><span>Leveraging BIM software and tools as a methodology to coordinate design progress.</span></li></ul> <br><strong>Qualifications</strong><br><p><span>To be successful in this dynamic opportunity, </span><span>we envision that you will have a diploma in drafting, or any other related subject. We welcome all levels of experience, preferably with more than 3 years of experience in a similar position.&nbsp;</span></p><br><p><span>Furthermore, you should demonstrate:&nbsp;</span></p><br><ul><li><span>Proven experience as a CAD Technician in Infrastructure / Waste Management / Landfill</span></li><li><span>Proficiency in software such as Autodesk AutoCAD and AutoCAD Civil 3D.&nbsp;</span></li><li><span>Experience in Infraworks is preferable.&nbsp;&nbsp;</span></li><li><span>Experience in GIS software will also be advantageous. </span></li><li><span>Solid written and verbal communication skills in English.&nbsp;</span></li></ul><p><span>KEO’s performance is founded upon integrity, results, innovation, safety and our people. We embrace diversity and recognise its’ contribution to client success wherever we work.</span></p><br><p><span>We are excited to hear how you can partner with our award-winning team and treat all expressions of interest confidentially.</span></p><br> </div>

<ul><li>Handle sensitive client information with confidentiality</li><li>Ensure all beauty rooms are always clean and set-up to a very high standard</li><li>Perform all nail treatments including manicure, pedicure, acrylic and gel nails</li><li>Perform hairdressing skills including uplift styles</li><li>Manage time effectively</li><li>Maintain great interpersonal and communication skills</li><li>Maintain positive attitude and patience</li><li>Maintain excellent personal hygiene and grooming</li><li>Prepare a travel wardrobe in case of Principal’s travel</li><li>Travel with principal if needed as lady’s maid</li><li>Know dry cleaning and ironing to safely maintain wardrobe items</li><li>Be flexible with working hours and be on call</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Superior knowledge and experience in Spa and Luxury hotels - 5 star</li><li>Certificate as a Nails Technician</li><li>Certificate as Hairdresser</li><li>Must speak English and Tagalog</li><li>Good time-management skills</li><li>Great interpersonal and communication skills</li><li>Positive attitude and patience</li><li>Excellent personal hygiene and grooming</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Quality Technician&nbsp;</p><br><br><p>Manufacturing Quality Technician&nbsp;</p><br><br><br><p>Purpose:</p><br><br><p>Ensure&nbsp;timely&nbsp;support to&nbsp;manufacturing&nbsp;team during production.&nbsp;&nbsp;</p><br><br><p>Ensure standards are respected&nbsp;along manufacturing&nbsp;process.&nbsp;&nbsp;</p><br><br><p>Ensure that intermediate and finished product non-conformities are managed and related corrective &amp; preventive actions held.&nbsp;</p><br><br><br><p>Consistently apply OPEN+ systems and tools.&nbsp;&nbsp;</p><br><br><p>Ensure compliance&nbsp;to&nbsp;all PMI and legal standards, policies and guidelines related to Environment, Health, Safety, Sustainability to prevent personnel,&nbsp;asset&nbsp;or societal loss.&nbsp;&nbsp;</p><br><br><p>Act and promote an interdependent and transparent safety culture fostering the&nbsp;utilization&nbsp;of preventive/predictive approach in line with Open+/IOS&nbsp;</p><br><br><br><p>PRODUCTION SUPPORT&nbsp;</p><br><br><p>Support production teams by providing Quality guidance and support in case of issues. Share knowledge and&nbsp;expertise&nbsp; to&nbsp;stakeholders (Q Champions) on new processes, requirements,&nbsp;methods&nbsp;or guidelines.&nbsp;</p><br><br><p>Train the floor on Quality practices and&nbsp;procedures, and&nbsp;ensure the operational staff&nbsp;remains&nbsp;up to date with our Quality requirements. Provide first level support for DIM troubleshooting and relevant trials.&nbsp;&nbsp;</p><br><br><p>Support brand change activities related to Gate 4 and VSU projects.&nbsp;&nbsp;</p><br><br><p>for RRP products: Coordinate the availability and testing of samples according to the sampling plan and the control strategy.&nbsp;</p><br><br><br><br><br><p>NC MANAGEMENT&nbsp;&nbsp;</p><br><br><p>Support investigation&nbsp;in a timely manner&nbsp;of non-conformities and deviation,&nbsp;leveraging&nbsp;on OPEN+ problem solving tools. Support investigation and resolution&nbsp;of&nbsp; critical&nbsp;deviations, contribute to&nbsp;define&nbsp;disposal actions and when&nbsp;appropriate corrective&nbsp;actions.&nbsp;</p><br><br><p>Based on recommendation from stakeholders,&nbsp;participate&nbsp;to&nbsp;the decision of releasing or destroying the non-conforming products blocked due to quality issues and&nbsp;monitor&nbsp;the related costs. Support BUBD activities for Semis and Finished Goods.&nbsp;</p><br><br><br><p>DOCUMENTATION MANAGEMENT &amp; QMS SUPPORT&nbsp;</p><br><br><p>Provide support to the production team whenever needed&nbsp;</p><br><br><p>Participate to the creation and review of procedures, work&nbsp;instructions&nbsp;and other Quality Documents. Provide support and training according to the training management system.&nbsp;&nbsp;</p><br><br><p>for RRP products: Ensure availability of Batch Record before the production in&nbsp;a timely&nbsp;manner.&nbsp;</p><br><br><br><p>CONTINUOUS IMPROVEMENT&nbsp;</p><br><br><p>Propose and follow-up quality improvement ideas in production or other processes in Operations.&nbsp;&nbsp;</p><br><br><p>Analyze the information and&nbsp;participate&nbsp;in small projects with&nbsp;influence&nbsp;on product quality.&nbsp;</p><br><br><br><p>MATERIALS MANAGEMENT&nbsp;&nbsp;</p><br><br><p>Ensure support to manufacturing&nbsp;in order to&nbsp;improve DIMs performance and its impact on product quality, machines efficiency and production costs.&nbsp;</p><br><br><br><p>NON-CONFORMITIES MANAGEMENT &amp; CAPA&nbsp;</p><br><br><p>Support investigation&nbsp;in a timely manner&nbsp;of non-conformities and deviation,&nbsp;leveraging&nbsp;on OPEN+ problem solving tools.&nbsp;&nbsp;Support&nbsp; the&nbsp;decision making&nbsp;process to quarantine the non-conforming material/products and liaise with interested parties to reveal the root cause and take relevant preventive/corrective actions. Ensure proper follow up and reporting of open actions and&nbsp;maintain&nbsp;the related database up to date. Ensure the proper flow is in place to manage and keep under control the costs related to goods destroyed (LOGD)&nbsp;</p><br><br><br><p>Communicate all useful information for the flow of Quality processes to colleagues and to support teams&nbsp;in order to&nbsp;meet productivity and quality. Support the development of the Q Champions and Equipment Owners through Quality&nbsp;trainings. Support Q Pillar&nbsp;deployment&nbsp; (e.g.Training, HC, QBOS).&nbsp;&nbsp;</p><br><br><br><p>For&nbsp;RRP :&nbsp;perform critical review of executed production batch records and manage intermediate and finished product&nbsp;non conformities&nbsp;and related corrective and preventive actions held with relevant stakeholders and&nbsp;ultimately confirm&nbsp;to the final approver that the product can be released for commercial manufacturing.&nbsp;</p><br><br><p>For RRP: Perform&nbsp;timely&nbsp;calibration and maintenance of&nbsp;at line&nbsp;Quality instruments and ensure proper functionality.&nbsp;</p><br><br><br> </div>

<p>Producing technical drawings related to waste management infrastructure, including landfills, transfer stations, waste storage rooms, etc.<br>Producing profiles and 3D models for earthworks designs (related to landfills).<br>Liaising with Engineers about the information required, the coordination between different disciplines and project progress.<br>Collaborating and coordinating with other disciplines to achieve a fully integrated design.<br>Converting concepts and sketches into engineering drawings based on the project requirements.<br>Developing workflows and templates for various stages in design and submissions.<br>Developing and maintaining a library of standard details for use in various design drawings (related to waste management infrastructure).<br>Leveraging BIM software and tools as a methodology to coordinate design progress.</p><p><strong>Desired Candidate Profile</strong></p><p>To be successful in this dynamic opportunity, we envision that you will have a diploma in drafting, or any other related subject. We welcome all levels of experience, preferably with more than 3 years of experience in a similar position. Furthermore, you should demonstrate:<br>P<br>Proven experience as a CAD Technician in Infrastructure / Waste Management / Landfill<br>P<br>Proficiency in software such as Autodesk AutoCAD and AutoCAD Civil 3D.<br>P<br>Experience in Infraworks is preferable.<br>P<br>Experience in GIS software will also be advantageous.<br>P<br>Solid written and verbal communication skills in English.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking for passionate and dynamic Maintenance professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.<br><br>As an Audiovisual Technician you are responsible to set up the audio-visual equipment for events in the hotel and provide technical assistance for the banquet facilities and rooms, whereby your role will include key responsibilities such as:<br><br>• Set up and check equipment for banquet functions based on daily issue of function sheets, including removal and storage<br>• Carry out work as assigned in order to ensure the correct and functional set up of all functions<br>• Operate equipment for functions as when required<br>• Ensure on a monthly basis that an inventory is conducted for all equipment used for banquets<br>• Ensure that all outgoing and incoming equipment which have been requested for banquets outside catering are logged daily<br>• Carry out assignments on the ‘Preventive Maintenance Programme’<br>• Cooperate and provide assistance with other Engineering colleagues whenever necessary and available<br>• Maintain cleanliness and orderliness inside A/V control room and A/V storage room<br>• Inspect all function room daily and breakouts area, ensuring all lights, A/C and services are defect free and repair or replace lamps immediately<br>• Carry out any work requested by your Superiors</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking for passionate and dynamic Maintenance professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.<br><br>As an A/C Technician you are responsible to install, service and repair temperature and air quality control systems and your role will include key responsibilities such as:<br><br>• Repair, maintain and provide technical attention to all electrical and mechanical refrigeration systems of the hotel - freezer, fridges, ice makers, fan coil units, chiller, etc.<br>• Maintain preventively all air-conditioning and refrigeration systems within the hotel<br>• Check on performance of refrigeration systems and components<br>• Verify all door closing systems on walk in coolers / freezer (door gaskets / latches)<br>• Check and maintain all defrosting systems and automation of ice makers<br>• Work on maintenance requests from all departments<br>• Ensure routine cleaning of fan coil units and air-handling unit filters<br>• Check on performance of air-conditioning and chill water systems<br>• Cooperate with all engineering colleagues in detention of failures of air-condition and refrigeration system and function set up<br>• Strict control on venting of CFC’s to atmosphere<br>• Overhauling of air-condition / refrigeration equipment and systems<br>• Check all refrigeration and oil levels and control of major repairs<br>• Cooperate and inform Engineering Storekeeper on purchase of parts<br>• Carry out all works as per the country technical regulations and safety standards</p> </div>

<p><h4>Essential responsibilities:</h4> <p>The designee shall be qualified to maintain, modify, and repair electrical power generating and control systems, automatic transfer switches, and associated equipment. Performs scheduled periodic maintenance on systems and components, and adjusts generator systems to maintain proper voltage, current frequency, and/or synchronization. Identifies, records, and repairs generator malfunctions by removing, repairing, and/or replacing defective power generating components.</p> <p>The designee shall maintain systems such as, but not limited to, Cummins generator series DGDK, DSGAB, DGBB, C15D6, C35D6, 125D6D, MEPP series 1050, 1070A, PP-3106A, and Cummins InPower software. This designee shall be qualified to work from blueprints, drawings, and operate a variety of electrician’s hand tools and testing instruments.</p> <p>Support various generator systems identified in Table 4.5.1 – C2 Systems and Associated Support Equipment; Table 4.5.2 ATCALS Systems and Associated Support Equipment; Table 4.5.3 ATC Weather Systems and Associated Support Equipment; Table 4.5.4 C2 Air Control Squadron O&M Support; Table 4.5.5 Regional Maintenance Center O&M and Support Equipment.</p> <h4>Minimum position knowledge, skills, and abilities required:</h4> <ul> <li>High school diploma or GED.</li> <li>Formal training on power generating equipment and associated equipment such as military technical training school, vocational college, and/or a four (4) year apprentice program with experience in electrical power production maintenance and repair.</li> <li>Four (4) years of practical experience with equipment the technician will maintain.</li> <li>Six (6) months of Cummins Commercial, Advanced Medium Mobile Power Source (AMMPS), and InPower Software experience required.</li> <li>Ability to lift of up to 50 lbs.</li> <li>Ability to do the following for sustained periods of time: stoop, bend, kneel, carry, reach, lift.</li> <li>Ability to work in a fast paced, constantly changing environment.</li> <li>Ability to obtain and maintain a US CENTCOM Medical Exam.</li> <li>Must have or be able to obtain/maintain a US Government Secret Security Clearance. Note: US citizenship is required to obtain a Secret Clearance.</li> </ul></p><p></p>

<p>The designee shall be qualified to maintain, modify, and repair electrical power generating and control systems, automatic transfer switches, heating, ventilation, air conditioning and refrigeration (HVAC) systems, and associated equipment. Performs scheduled periodic maintenance on systems and components, and adjusts systems to maintain proper voltage, refrigerant levels, current, frequency, and synchronization. Identifies, repairs, and records malfunctions by removing, repairing, and or replacing defective components. The designee shall maintain systems such as, but not limited to Cummins generator series' DGDK, DSGAB, DGBB, C15D6, C35D6 125D6D, MEPP series 1050, 1070A, PP- 3106A and utilize Cummins Inpower software for diagnostics. This designee shall be qualified to work from blueprints, drawings, and operating a variety of electrician s hand tools and testing instruments. Support various generator/HVAC systems identified in Table 4.5.1 C2 Systems and Associated Support Equipment; Table 4.5.2 ATCALS Systems and Associated Support Equipment; Table 4.5.3 ATC Weather Systems and Associated Support equipment; Table 4.5.4 C2 Air Control Squadron O&amp;M Support, Table 4.5.5 Regional Maintenance Center O&amp;M and Support Equipment. Units range from 15kW to 250kW power generation and 1 - 5 ton HVAC split and roof top configurations.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Universal 608 HVAC certification.</li><li>High School diploma or GED. Formal training on power generating equipment and associated equipment such as: military technical training school, vocational college, and/or a four (4) year apprentice program with experience in electrical power production maintenance and repair.</li><li>Willingness to perform other duties outside the HVAC trade.</li><li>Computer knowledge to navigate online training, time keeping and email.</li><li>Four (4) years of practical experience with equipment the technician will maintain. Six (6) months of Cummins Commercial, Advanced Medium Mobile Power Source (AMMPS) and InPower Software experience required.</li><li>Ability to lift of up 50 lbs.</li><li>Ability to do the following for sustained periods of time: stoop, bend, kneel, carry, reach, lift.</li><li>Ability to work in a fast paced, constantly changing environment</li><li>Ability to obtain and maintain a US CENTCOM Medical Exam</li><li>Must have or be able to obtain/maintain a US Government Secret Security Clearance. NOTE: US Citizenship is required to obtain a Secret Clearance</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Al-Kasih Group for Food Industries announces its desire to attract a distinguished technical professional to be part of its engineering and maintenance team, for the position of "Mechanical Technician". We are looking for an individual who possesses passion and practical experience while adhering to the highest standards of occupational safety to ensure the continuous operation of machinery and equipment with high efficiency, and to reduce production downtime.</p><p><br></p><p><b>General Objective of the Position:</b></p><p> To ensure the continuous operation of machinery and equipment with high operational efficiency, and to reduce unexpected downtime through the implementation of preventive and corrective maintenance programs in the food industries sector.</p><p><br></p><p><b>Responsibilities and Job Tasks:</b></p><p> • Preventive Maintenance: Implementing scheduled routine inspections for machinery, diagnosing moving parts, and changing oils and filters regularly for production lines.</p><p> • Corrective Maintenance: Diagnosing unexpected mechanical failures, dismantling defective equipment, and repairing or replacing defective parts efficiently and in the least possible time.</p><p> • Reading Schematics: Understanding and analyzing technical catalogs, engineering drawings, and mechanical schematics to determine parts and maintenance pathways accurately.</p><p> • Hydraulic and Pneumatic Systems: Maintenance and repair of pumps, valves, cylinders, and air or oil systems in production lines.</p><p> • Spare Parts Management: Identifying requirements accurately for spare parts and technical tools, and notifying the supervisor to secure them from warehouses.</p><p> • Technical Documentation: Writing daily maintenance reports, recording recurring failures, and documenting working hours performed accurately.</p><p> • Occupational Safety: Strict adherence to health and safety standards (OSHA), and wearing personal protective equipment (PPE) during work.</p><ul><li>Thorough knowledge of types of pumps and their components and handling.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p> • <b>Educational Qualification:</b> Diploma in Engineering or a technical institute certificate in (Mechanical Engineering, Equipment Maintenance, or equivalent).</p><p> <b> • Work Experience:</b> Minimum of 5 years of practical experience in an industrial facility or factories (experience in the food industry is preferred).</p><p><b> • Technical Skills:</b> Comprehensive knowledge of using precision measuring tools, hand tools, and specialized electrical maintenance tools.</p><p><b> • Personal Attributes:</b> Strong analytical skills and troubleshooting abilities under pressure, physical fitness, and the ability to work in industrial environments, along with good communication skills for collaboration with the electrical maintenance team.</p></div>

<p>Essential Responsibilities: The designee shall be qualified to install, sustain, troubleshoot, and repair standard radio frequency wireless, line-of-sight, beyond line-of-sight, wideband, ground-based satellite, and encryption transmission devices. Included are multiple waveform systems operating across the spectrum, keying and signal devices, telemetry, and instrumentation systems. Assembles, connects, secures, and interconnects components such as transmitters, power supplies, and antenna assemblies. Resolves installation, repair, and modification problems associated with communications equipment. Employs orbiting communication satellite, line-of-sight, and tropospheric scatter techniques. Conducts tests to restore and maintain systems. Uses layout drawings, schematics, and pictorial diagrams to solve maintenance problems and ensure equipment is properly positioned. Analyzes construction and operating characteristics of equipment to determine source of malfunction. Performs intricate alignment and calibration procedures to ensure maximum operating efficiency. Reviews and ensures compliance with maintenance management publications and procedures. Enforces safety standards for system maintenance activities. Checks installed and repaired components for compliance with technical publications. Maintains inspection and maintenance records. Posts entries on maintenance and inspection records. Records meter readings and other pertinent data in equipment logs. Completes maintenance data collection forms. Requisitions, accounts for, and turns in supplies and material. The designee shall maintain systems are such as CM-200, CM-300, GRC-171 &amp; 211, GRR-23/24, PCAS, GRT- 21/22, PRC-117F/G, RT-1319, TRC-176, URC-200, EPLRS radio, MIDS LVT 2, MIDS LVT 11,AN/TRC-214, Joint Radio Relay (JR2), Cornet TVCS-L, LHSC, RT9000D, 721S-1, 721S-2, ALE, Have Quick, SINCGARS, KY-100, VSAT VRC-103, TTRS, RT-1747, Sun Air RT-9000, Hawkeye Lite, Ranger 1200, iDirect 850/950 Modem, 2050E Modem, but not be limited to those listed in Table 4.5.1. C2 Systems and Associated Equipment; Table 4.5.4 C2 Air Control Squadron O&amp;M Support.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Position Knowledge, Skills, and Abilities Required: High School diploma or GED. Formal electronics training such as: military technical training school, vocational college, and/or a four (4) year electronics apprentice program with experience in electronics equipment the technician will maintain. Minimum IAT Level II, baseline certification IAW AFMAN 17-1303, IP fundamentals, familiarity with deployable communications systems, RF/SATCOM principles highly desired. Ability to obtain and maintain a US CENTCOM Medical Exam Must have or be able to obtain/maintain a US Government Secret Security Clearance. NOTE: US Citizenship is required to obtain a Secret Clearance.</p>

<p><h4>Essential responsibilities:</h4> <p>The designee shall be qualified to install, sustain, troubleshoot, and repair standard radio frequency wireless, line-of-sight, beyond line-of-sight, wideband, ground-based satellite, and encryption transmission devices. Included are multiple waveform systems operating across the spectrum, keying and signal devices, telemetry, and instrumentation systems. Assembles, connects, secures, and interconnects components such as transmitters, power supplies, and antenna assemblies.</p> <p>Resolves installation, repair, and modification problems associated with communications equipment. Employs orbiting communication satellite, line-of-sight, and tropospheric scatter techniques. Conducts tests to restore and maintain systems. Uses layout drawings, schematics, and pictorial diagrams to solve maintenance problems and ensure equipment is properly positioned. Analyzes construction and operating characteristics of equipment to determine source of malfunction. Performs intricate alignment and calibration procedures to ensure maximum operating efficiency.</p> <p>Reviews and ensures compliance with maintenance management publications and procedures. Enforces safety standards for system maintenance activities. Checks installed and repaired components for compliance with technical publications. Maintains inspection and maintenance records. Posts entries on maintenance and inspection records. Records meter readings and other pertinent data in equipment logs. Completes maintenance data collection forms. Requisitions, accounts for, and turns in supplies and material.</p> <p>The designee shall maintain systems such as CM-200, CM-300, GRC-171 & 211, GRR-23/24, PCAS, GRT-21/22, PRC-117F/G, RT-1319, TRC-176, URC-200, EPLRS radio, MIDS LVT 2, MIDS LVT 11, AN/TRC-214, Joint Radio Relay (JR2), Cornet TVCS-L, LHSC, RT9000D, 721S-1, 721S-2, ALE, Have Quick, SINCGARS, KY-100, VSAT VRC-103, TTRS, RT-1747, Sun Air RT-9000, Hawkeye Lite, Ranger 1200, iDirect 850/950 Modem, 2050E Modem, but not be limited to those listed in Table 4.5.1 C2 Systems and Associated Equipment; Table 4.5.4 C2 Air Control Squadron O&M Support.</p> <h4>Minimum position knowledge, skills, and abilities required:</h4> <p>High school diploma or GED. Formal electronics training such as military technical training school, vocational college, or a four-year electronics apprentice program with experience in electronics equipment the technician will maintain.</p> <p>Minimum IAT Level II, baseline certification in accordance with AFMAN 17-1303, IP fundamentals, familiarity with deployable communications systems, RF/SATCOM principles highly desired.</p> <p>Ability to obtain and maintain a US CENTCOM medical exam.</p> <p>Must have or be able to obtain and maintain a US Government Secret Security Clearance. Note: US citizenship is required to obtain a Secret Clearance.</p></p><p></p>

<p>The designee shall be qualified to install, sustain, troubleshoot, and repair standard radio frequency wireless, line-of-sight, beyond line-of-sight, wideband, ground-based satellite, and encryption transmission devices. Included are multiple waveform systems operating across the spectrum, keying and signal devices, telemetry, and instrumentation systems. Assembles, connects, secures, and interconnects components such as transmitters, power supplies, and antenna assemblies. Resolves installation, repair, and modification problems associated with communications equipment. Employs orbiting communication satellite, line-of-sight, and tropospheric scatter techniques. Conducts tests to restore and maintain systems. Uses layout drawings, schematics, and pictorial diagrams to solve maintenance problems and ensure equipment is properly positioned. Analyzes construction and operating characteristics of equipment to determine source of malfunction. Performs intricate alignment and calibration procedures to ensure maximum operating efficiency. Reviews and ensures compliance with maintenance management publications and procedures. Enforces safety standards for system maintenance activities. Checks installed and repaired components for compliance with technical publications. Maintains inspection and maintenance records. Posts entries on maintenance and inspection records. Records meter readings and other pertinent data in equipment logs. Completes maintenance data collection forms. Requisitions, accounts for, and turns in supplies and material. The designee shall maintain systems are such as CM-200, CM-300, GRC-171 &amp; 211, GRR-23/24, PCAS, GRT- 21/22, PRC-117F/G, RT-1319, TRC-176, URC-200, EPLRS radio, MIDS LVT 2, MIDS LVT 11,AN/TRC-214, Joint Radio Relay (JR2), Cornet TVCS-L, LHSC, RT9000D, 721S-1, 721S-2, ALE, Have Quick, SINCGARS, KY-100, VSAT VRC-103, TTRS, RT-1747, Sun Air RT-9000, Hawkeye Lite, Ranger 1200, iDirect 850/950 Modem, 2050E Modem, but not be limited to those listed in Table 4.5.1. C2 Systems and Associated Equipment; Table 4.5.4 C2 Air Control Squadron O&amp;M Support.</p><p><strong>Desired Candidate Profile</strong></p><p>High School diploma or GED. Formal electronics training such as: military technical training school, vocational college, and/or a four (4) year electronics apprentice program with experience in electronics equipment the technician will maintain. • Minimum IAT Level II, baseline certification IAW AFMAN 17-1303, IP fundamentals, familiarity with deployable communications systems, RF/SATCOM principles highly desired. • Ability to obtain and maintain a US CENTCOM Medical Exam • Must have or be able to obtain/maintain a US Government Secret Security Clearance. NOTE: US Citizenship is required to obtain a Secret Clearance.</p>

<p><strong>Job Title: &nbsp;</strong>WAM Liaison Officer&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;</p> <p><strong>Department: </strong>WAM/ Operations&nbsp;&nbsp;</p> <p><strong>Position Grade:</strong> D</p> <p><strong>Reports to: </strong>TFM Training Lead/WAM Operations Manager&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</p> <p ><strong>No. of subordinates: &nbsp;&nbsp;</strong>Direct:&nbsp; 0&nbsp;&nbsp; &nbsp;&nbsp;Indirect: 0</p> <p ><strong>Working time %: </strong>100%</p> <p><strong>Location: </strong>MAG Jordan – Amman, Zarqa, with travel to project operational areas outside of these location.</p> <p><strong>_________________________________________________________________________________</strong></p> <p>&nbsp;</p> <p>&nbsp;</p> <p><strong>MAG’s Vision is a safe future for women, men and children affected by violence, conflict and insecurity. </strong>People will live in communities where their rights are upheld, with dignity and choice and free from fear from mines, explosive remnants of war (ERW) and the impact of small arms and light weapons and ammunition.</p> <p>&nbsp;</p> <p><strong>MAG’s Mission is to save lives and build safer futures.</strong>&nbsp;We will use our core skills and distinctive competence to save lives through the removal of mines and ERW, and reduce the impact of small arms, light weapons and ammunition on people and communities. How we do this is as important as what we do – we work primarily with and for communities, for us ‘it’s all about people’.</p> <p>&nbsp;</p> <p><strong>MAG’s Values</strong><strong>. </strong>Our values come to life through our actions, every day. How we act has an impact on others. As someone who works at MAG, you can help to create a positive culture by demonstrating our values through your own behaviour and actions. Everyone has a role to play in shaping our culture. Everyone should understand our values and is encouraged to think how they are relevant to their individual role.</p> <p>&nbsp;</p> <p><strong>DETERMINED</strong><strong> - We work with purpose. </strong></p> <p>&nbsp;</p> <p><strong>EXPERT </strong><strong>- Through excellence and expertise we build trust.</strong></p> <p>&nbsp;</p> <p><strong>INTEGRITY</strong><strong> - We strive to do the right thing.</strong></p> <p>&nbsp;</p> <p><strong>COMPASSION</strong><strong> - People come first in everything we do. </strong></p> <p>&nbsp;</p> <p><strong>INCLUSIVE</strong><strong> - We are inclusive, and we value diversity. </strong></p> <p><strong>_________________________________________________________________________________</strong></p> <p>&nbsp;</p> <p><strong><u>Job Purpose</u></strong></p> <p>&nbsp;</p> <p>The Liaison Officer will provide dedicated coordination and administrative support to facilitate the effective delivery of the International Ammunition Technician Course conducted in Jordan for Jordanian Armed Forces (JAF) personnel. The role is specifically designed to assist the newly deployed Training Lead (TL) in managing daily and weekly operational, logistical, translation, and coordination requirements associated with the course, ensuring smooth communication between stakeholders and uninterrupted execution of training activities.</p> <p>The Liaison Officer will support translation of technical training delivering as required, other duties will be to ensure that all enabling functions, such as coordination with military counterparts, scheduling, documentation, and logistical follow‑up, are managed efficiently and in accordance with organisational procedures and national protocols.</p> <p>&nbsp;</p> <p><strong>_________________________________________________________________________________</strong></p> <p>&nbsp;</p> <p>&nbsp;</p> <p>&nbsp;</p> <p><strong><u>Principal Responsibilities </u></strong></p> <p>&nbsp;</p> <p><strong><u>Liaison, Coordination and Representation</u></strong></p> <p>&nbsp;</p> <ol> <li>Act as the day‑to‑day liaison between the project team, the Technical Field Managers (TFMs) Training Lead, and designated Jordanian Armed Forces (JAF) focal points.</li> <li>Facilitate official communication and coordination with JAF and administrative offices to support course implementation.</li> <li>Translate training delivery where needed.</li> <li>Coordinate access permissions, entry procedures, and movement within military installations in line with national military regulations.</li> <li>Support the TFMs in arranging meetings, briefings, and coordination sessions with JAF counterparts and other relevant stakeholders.</li> <li>Represent the organisation in routine coordination meetings when required and relay outcomes to the TFMs and project management.</li> <li>Ensure cultural and institutional sensitivities are respected in all interactions with national counterparts.</li> <li>Understand all stakeholder organisational structures and operate within their boundaries.</li> <li>Ensure relevant and transparent communications on all program issues.</li> <li>Ensure the integrity of MAG’s organisational profile in all external communications (written and verbal).</li> </ol> <p>&nbsp;</p> <p><strong><u>Project Planning and Monitoring</u></strong></p> <p>&nbsp;</p> <ol> <li>Responsible for Procurement and logistics planning, coordination, follow up on deliveries with procurement and logistics department.&nbsp;</li> <li>Assist the TFMs in preparing and maintaining detailed weekly and daily activity plans for the duration of the course.</li> <li>Track implementation of planned activities, including classroom sessions, practical exercises, site visits, and administrative milestones.</li> <li>Maintain an updated course schedule and ensure timely dissemination of changes to all concerned parties.</li> <li>Monitor the availability and readiness of training venues, equipment, and supporting services, and follow up with responsible entities to resolve issues.</li> <li>Support the organization of opening and closing ceremonies, official visits, and evaluation events as required.</li> <li>Highlight and address the TFMs problems that partner organisations encounter during partner collaboration and cooperation.</li> </ol> <p>&nbsp;</p> <p><strong><u>Information Management</u></strong></p> <p >&nbsp;</p> <ol> <li>Ensure collection of the required data.</li> <li>Provide data to the Information Management Unit in the appropriate formats.</li> <li>Undertake data entry, analysis, and reporting as required.</li> <li>Maintain organised records of participant lists, attendance sheets, contact details, and official correspondence related to the course.</li> <li>Manage the flow of information between the TFMs, project team, and JAF counterparts to ensure all stakeholders have accurate and up‑to‑date information.</li> <li>Ensure that all documentation is stored, archived, and shared in accordance with organisational information management procedures.</li> <li>Support the preparation and translation (if required) of administrative documents, schedules, and routine correspondence between English and Arabic.</li> </ol> <p>&nbsp;</p> <p>&nbsp;</p> <p><strong><u>Reporting</u></strong></p> <p>&nbsp;</p> <ol> <li>Submit weekly activity plans and reports to the TFM-TL and other persons as required.</li> <li>Maintain clear and efficient communication with the TFMs and other team members as necessary, ensuring effective reporting when needed.</li> <li>Provide the TFMs with regular updates on coordination status, emerging issues, and required follow‑up actions.</li> <li>Draft short weekly coordination summaries highlighting key activities, challenges, and mitigation measures.</li> <li>Maintain logs of meetings, decisions, and action points, ensuring they are tracked to completion.</li> <li>Support the compilation of end‑of‑course administrative reports and lessons learned related to coordination and logistics.</li> </ol> <div> <p>&nbsp;</p>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements. USAF equivalent position is Munitions/Weapons Technician Apprentice. Essential Responsibilities: Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components. Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction. Assist in management of all inspection, maintenance, and storage of munitions and support equipment. Support quality assurance, compliance, continuity, and standardization of munitions programs. Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems. Maintain weapons certification and currency. Assist with availability and serviceability of munitions to support and meet customer requirements. Perform all other duties as assigned or requested.</p><p><strong>Desired Candidate Profile</strong></p><p>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum. Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required. Completed USAF Munitions/Weapons Tech School or DoD equivalent. Must possess basic knowledge of technical publications related to aircraft maintenance. Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo Must be able to inspect and operate ground support and auxiliary equipment. Must achieve a passing grade in all required courses/certifications for continued employment, as needed. Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment. Must be able to Deploy to Forward Locations (other countries) as Directed by the Government. Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. Must be able to speak, read, write, and understand English. Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance. Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment. Must submit updated SF-86 within 30 days of hire start date. Must have current/active State Issued Driver s License. Must be able to acquire and maintain a valid flight-line Government Driver s License. Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages. Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances. Preferred Qualifications: Associate degree in a relevant career field. RPA Deployment Experience. Prior Experience as a Defense Contractor. Munitions/Weapons experience within the last 10 years .</p>